summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/amlogic
AgeCommit message (Collapse)Author
2019-10-07arm64: dts: meson: odroid-c2: Add missing linking regulator to usb busAnand Moon
Add missing linking regulator node to usb bus for power usb devices. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> [ khilman: minor typo fixup ] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson: odroid-c2: p5v0 is the main 5V power inputAnand Moon
As per the schematic Monolithic Power Systems MP2161GJ-C499 supply a fixed output voltage of 5.0V. This supplies linked to VDD_EE, HDMI_P5V0, USB_POWER, VCCK, VDDIO_AO1V8, VDDIO_AO3V3, VDD3V3, DDR3_1V5 according to the schematics. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson-g12b-ugoos-am6: add initial device-treeChristian Hewitt
The Ugoos AM6 is based on the Amlogic W400 (G12B) reference design using the S922X chipset. Hardware specifications: - 2GB LPDDR4 RAM - 16GB eMMC storage - 10/100/1000 Base-T Ethernet using External RGMII PHY - 802.11 a/b/g/b/ac + BT 5.0 sdio wireless (Ampak 6398S) - HDMI 2.0 (4k@60p) video - Composite video + 2-channel audio output on 3.5mm jack - S/PDIF audio output - Aux input - 1x USB 3.0 - 3x USB 2.0 - 1x micro SD card slot The device-tree is largely based on meson-g12b-odroid-n2 but with audio and USB config copied from meson-g12a-x96-max. Tested-by: Oleg Ivanov <balbes-150@yandex.ru> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: meson: Add capacity-dmips-mhz attributes to G12BFrank Hartung
Meson G12B SoCs (S922X and A311D) are a big-little design where not all CPUs are equal; the A53s cores are weaker than the A72s. Include capacity-dmips-mhz properties to tell the OS there is a difference in processing capacity. The dmips values are based on similar submissions for other A53/A72 SoCs: HiSilicon 3660 [1] and Rockchip RK3399 [2]. This change is particularly beneficial for use-cases like retro gaming where emulators often run on a single core. The OS now chooses an A72 core instead of an A53 core. [1] https://lore.kernel.org/patchwork/patch/862742/ [2] https://patchwork.kernel.org/patch/10836577/ Signed-off-by: Frank Hartung <supervisedthinking@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-07arm64: dts: add support for A1 based Amlogic AD401Jianxin Pan
Add basic support for the Amlogic A1 based Amlogic AD401 board: which describe components as follows: Reserve Memory, CPU, GIC, IRQ, Timer, UART. It's capable of booting up into the serial console. Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: khadas-vim3: add commented support for PCIeNeil Armstrong
The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between an USB3.0 Type A connector and a M.2 Key M slot. The PHY driving these differential lines is shared between the USB3.0 controller and the PCIe Controller, thus only a single controller can use it. The needed DT configuration when the MCU is configured to mux the PCIe/USB3.0 differential lines to the M.2 Key M slot is added commented and may be uncommented to disable USB3.0 from the USB Complex and enable the PCIe controller. The End User is not expected to uncomment the following except for testing purposes, but instead rely on the firmware/bootloader to update these nodes accordingly if PCIe mode is selected by the MCU. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-g12a: Add PCIe nodeNeil Armstrong
This adds the Amlogic G12A PCI Express controller node, also using the USB3+PCIe Combo PHY. The PHY mode selection is static, thus the USB3+PCIe Combo PHY phandle would need to be removed from the USB control node if the shared differential lines are used for PCIe instead of USB3. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: Link nvmem and secure-monitor nodesCarlo Caione
The former is going to use the latter to retrieve the efuses data. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-g12b-khadas-vim3: add keep-power-in-suspend property in ↵Neil Armstrong
SDIO node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-sm1-sei610: add keep-power-in-suspend property in SDIO nodeNeil Armstrong
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxm-rbox-pro: add keep-power-in-suspend property in SDIO nodeNeil Armstrong
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxm-khadas-vim2: add keep-power-in-suspend property in ↵Neil Armstrong
SDIO node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxl-s905x-p212: add keep-power-in-suspend property in SDIO ↵Neil Armstrong
node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxl-s905x-nexbox-a95x: add keep-power-in-suspend property ↵Neil Armstrong
in SDIO node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxl-s805x-p241: add keep-power-in-suspend property in SDIO ↵Neil Armstrong
node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxbb-wetek: add keep-power-in-suspend property in SDIO nodeNeil Armstrong
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxbb-vega-s95: add keep-power-in-suspend property in SDIO nodeNeil Armstrong
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxbb-p20x: add keep-power-in-suspend property in SDIO nodeNeil Armstrong
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxbb-nexbox-a95x: add keep-power-in-suspend property in ↵Neil Armstrong
SDIO node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gxbb-nanopi-k2: add keep-power-in-suspend property in SDIO ↵Neil Armstrong
node The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-gx-p23x-q20x: add keep-power-in-suspend property in SDIO nodeNeil Armstrong
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-g12a-x96-max: add keep-power-in-suspend property in SDIO nodeNeil Armstrong
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson-g12a-sei510: add keep-power-in-suspend property in SDIO nodeNeil Armstrong
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: g12: move audio bus out of g12-commonJerome Brunet
The base address of the audio bus and pdm device are different between the g12 and sm1 SoC families. Overwriting the reg property only would leave with confusing node names on the sm1. Move the audio related devices to the g12 dtsi. The appropriate nodes will be created for the sm1 later on. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: g12: factor the power domain.Jerome Brunet
The power domain declared in the g12a and g12b dtsi are the same. Move the declaration of these power domains in the g12 common dtsi. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: g12: add a g12 layerJerome Brunet
While the sm1 is very close to the g12a/b family, somethings apply differently on the g12a/b and not the sm1. This introduce a new layer of dtsi for part which apply to the g12a and g12b but not the sm1. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: g12: fix audio fifo reg sizeJerome Brunet
The register region size initially is too small to access all the fifo registers. Fixes: c59b7fe5aafd ("arm64: dts: meson: g12a: add audio fifos") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: axg: fix audio fifo reg sizeJerome Brunet
The register region size initially is too small to access all the fifo registers. Fixes: f2b8f6a93357 ("arm64: dts: meson-axg: add audio fifos") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: sm1: set gpio interrupt controller compatibleJerome Brunet
Set the appropriate gpio interrupt controller compatible for the sm1 SoC family. This newer version of the controller can now trig irq on both edge of the input signal Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-sm1-sei610: add stdout-path property backNeil Armstrong
The commit d4609acce187 ("arm64: dts: meson-sm1-sei610: enable DVFS") incorrectly removed the chosen node and the stdout-path property. Add these back. Fixes: d4609acce187 ("arm64: dts: meson-sm1-sei610: enable DVFS") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-sm1-sei610: enable DVFSNeil Armstrong
This enables DVFS for the Amlogic SM1 based SEI610 board by: - Adding the SM1 SoC OPPs taken from the vendor tree - Selecting the SM1 Clock controller instead of the G12A one - Adding the CPU rail regulator, PWM and OPPs for each CPU nodes. Each power supply can achieve 0.69V to 1.05V using a single PWM output clocked at 666KHz with an inverse duty-cycle. DVFS has been tested by running the arm64 cpuburn at [1] and cycling between all the possible cpufreq translations of the cpu cluster and checking the final frequency using the clock-measurer, script at [2]. [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S [2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: khadas-vim3: add support for the SM1 based VIM3LNeil Armstrong
Add the Amlogic SM1 based Khadas VIM3L, sharing all the same features as the G12B based VIM3, but: - a different DVFS support since only a single cluster is available - audio is still not available on SM1 Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsiNeil Armstrong
To prepare support of the Amlogic SM1 based Khadas VIM3, move the non-G12B specific nodes (all except DVFS and Audio) to a new meson-khadas-vim3.dtsi Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson: g12a: add reset to tdm formattersJerome Brunet
Add the reset to the TDM formatters of the g12a. This helps with channel mapping when a playback/capture uses more than 1 lane. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson: g12a: audio clock controller provides resetsJerome Brunet
The clock controller dedicated to audio clocks also provides reset lines on the g12 SoC family Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-sm1-sei610: enable DVFSNeil Armstrong
This enables DVFS for the Amlogic SM1 based SEI610 board by: - Adding the SM1 SoC OPPs taken from the vendor tree - Selecting the SM1 Clock controller instead of the G12A one - Adding the CPU rail regulator, PWM and OPPs for each CPU nodes. Each power supply can achieve 0.69V to 1.05V using a single PWM output clocked at 666KHz with an inverse duty-cycle. DVFS has been tested by running the arm64 cpuburn at [1] and cycling between all the possible cpufreq translations of the cpu cluster and checking the final frequency using the clock-measurer, script at [2]. [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S [2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-gxm-khadas-vim2: use rc-khadas keymapChristian Hewitt
Swap to the rc-khadas keymap that maps the mouse button to KEY_MUTE. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-gxl-s905w-tx3-mini: add rc-tx3mini keymapChristian Hewitt
add the rc-tx3mini keymap to the ir node Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-gxl-s905x-khadas-vim: use rc-khadas keymapChristian Hewitt
Swap to the rc-khadas keymap that maps the mouse button to KEY_MUTE. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-gxbb-wetek-play2: add rc-wetek-play2 keymapChristian Hewitt
add the rc-wetek-play2 keymap to the ir node Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-gxbb-wetek-hub: add rc-wetek-hub keymapChristian Hewitt
add the rc-wetek-hub keymap to the ir node Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-g12a-x96-max: add rc-x96max keymapChristian Hewitt
add the rc-x96max keymap to the ir node Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-g12b-odroid-n2: add rc-odroid keymapChristian Hewitt
add the rc-odroid keymap to the ir node Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-sm1-sei610: add USB supportNeil Armstrong
Add the USB properties for the Amlogic SM1 Based SEI610 Board in order to support the USB DRD Type-C port and the USB3 Type A port. The USB DRD Type-C controller uses the ID signal to toggle the USB role between the DWC3 Host controller and the DWC2 Device controller. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-sm1-sei610: add HDMI display supportNeil Armstrong
Add the HDMI support nodes for the Amlogic SM1 Based SEI610 Board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-g12: add Everything-Else power domain controllerNeil Armstrong
Replace the VPU-centric power domain controller by the generic system-wide Everything-Else power domain controller and setup the right power-domains properties on the VPU, Ethernet & USB nodes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [khilman: minor subject edit: add dts] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson: fix boards regulators states formatNeil Armstrong
This fixes the following DT schemas check errors: meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected) meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected) meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-gxbb-p201: fix snps, reset-delays-us formatNeil Armstrong
This fixes the following DT schemas check errors: meson-gxbb-p201.dt.yaml: ethernet@c9410000: snps,reset-delays-us: [[0, 10000, 1000000]] is too short Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-gxbb-nanopi-k2: add missing modelNeil Armstrong
This fixes the following DT schemas check errors: meson-gxbb-nanopi-k2.dt.yaml: /: 'model' is a required property Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson-g12a-x96-max: fix compatibleNeil Armstrong
This fixes the following DT schemas check errors: meson-g12a-x96-max.dt.yaml: /: compatible: ['amediatech,x96-max', 'amlogic,u200', 'amlogic,g12a'] is not valid under any of the given schemas Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 09:53:51 +0000