| Age | Commit message (Collapse) | Author |
|---|
|
Use the new 'as-instr' Kconfig macro to define CONFIG_BROKEN_GAS_INST
directly, making it available everywhere.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
[will: Drop redundant 'y if' logic]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As the Kconfig syntax gained support for $(as-instr) tests, move the LSE
gas support detection from Makefile to the main arm64 Kconfig and remove
the additional CONFIG_AS_LSE definition and check.
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This patch implements FTRACE_WITH_REGS for arm64, which allows a traced
function's arguments (and some other registers) to be captured into a
struct pt_regs, allowing these to be inspected and/or modified. This is
a building block for live-patching, where a function's arguments may be
forwarded to another function. This is also necessary to enable ftrace
and in-kernel pointer authentication at the same time, as it allows the
LR value to be captured and adjusted prior to signing.
Using GCC's -fpatchable-function-entry=N option, we can have the
compiler insert a configurable number of NOPs between the function entry
point and the usual prologue. This also ensures functions are AAPCS
compliant (e.g. disabling inter-procedural register allocation).
For example, with -fpatchable-function-entry=2, GCC 8.1.0 compiles the
following:
| unsigned long bar(void);
|
| unsigned long foo(void)
| {
| return bar() + 1;
| }
... to:
| <foo>:
| nop
| nop
| stp x29, x30, [sp, #-16]!
| mov x29, sp
| bl 0 <bar>
| add x0, x0, #0x1
| ldp x29, x30, [sp], #16
| ret
This patch builds the kernel with -fpatchable-function-entry=2,
prefixing each function with two NOPs. To trace a function, we replace
these NOPs with a sequence that saves the LR into a GPR, then calls an
ftrace entry assembly function which saves this and other relevant
registers:
| mov x9, x30
| bl <ftrace-entry>
Since patchable functions are AAPCS compliant (and the kernel does not
use x18 as a platform register), x9-x18 can be safely clobbered in the
patched sequence and the ftrace entry code.
There are now two ftrace entry functions, ftrace_regs_entry (which saves
all GPRs), and ftrace_entry (which saves the bare minimum). A PLT is
allocated for each within modules.
Signed-off-by: Torsten Duwe <duwe@suse.de>
[Mark: rework asm, comments, PLTs, initialization, commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Torsten Duwe <duwe@suse.de>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Tested-by: Torsten Duwe <duwe@suse.de>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Julien Thierry <jthierry@redhat.com>
Cc: Will Deacon <will@kernel.org>
|
|
CONFIG_COMPAT_VDSO is defined by passing '-DCONFIG_COMPAT_VDSO' to the
compiler when the generic compat vDSO code is in use. It's much cleaner
and simpler to expose this as a proper Kconfig option (like x86 does),
so do that and remove the bodge.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There's no need to export COMPATCC, so just define it locally in the
vdso32/Makefile, which is the only place where it is used.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Rather than force the use of GCC for the compat cross-compiler, instead
extract the target from CROSS_COMPILE_COMPAT and pass it to clang if the
main compiler is clang.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The .config file and the generated include/config/auto.conf can
end up out of sync after a set of commands since
CONFIG_CROSS_COMPILE_COMPAT_VDSO is not updated correctly.
The sequence can be reproduced as follows:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- defconfig
[...]
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- menuconfig
[set CONFIG_CROSS_COMPILE_COMPAT_VDSO="arm-linux-gnueabihf-"]
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
Which results in:
arch/arm64/Makefile:62: CROSS_COMPILE_COMPAT not defined or empty,
the compat vDSO will not be built
even though the compat vDSO has been built:
$ file arch/arm64/kernel/vdso32/vdso.so
arch/arm64/kernel/vdso32/vdso.so: ELF 32-bit LSB pie executable, ARM,
EABI5 version 1 (SYSV), dynamically linked,
BuildID[sha1]=c67f6c786f2d2d6f86c71f708595594aa25247f6, stripped
A similar case that involves changing the configuration parameter
multiple times can be reconducted to the same family of problems.
Remove the use of CONFIG_CROSS_COMPILE_COMPAT_VDSO altogether and
instead rely on the cross-compiler prefix coming from the environment
via CROSS_COMPILE_COMPAT, much like we do for the rest of the kernel.
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build in
unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
* tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits)
genksyms: convert to SPDX License Identifier for lex.l and parse.y
modpost: use __section in the output to *.mod.c
modpost: use MODULE_INFO() for __module_depends
export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols
export.h: remove defined(__KERNEL__), which is no longer needed
kbuild: allow Clang to find unused static inline functions for W=1 build
kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN
kbuild: refactor scripts/Makefile.extrawarn
merge_config.sh: ignore unwanted grep errors
kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)
modpost: add NOFAIL to strndup
modpost: add guid_t type definition
kbuild: add $(BASH) to run scripts with bash-extension
kbuild: remove ARCH_{CPP,A,C}FLAGS
kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC
kbuild: Do not enable -Wimplicit-fallthrough for clang for now
kbuild: clean up subdir-ymn calculation in Makefile.clean
kbuild: remove unneeded '+' marker from cmd_clean
kbuild: remove clean-dirs syntax
kbuild: check clean srctree even earlier
...
|
|
* for-next/atomics: (10 commits)
Rework LSE instruction selection to use static keys instead of alternatives
|
|
'for-next/error-injection', 'for-next/perf', 'for-next/psci-cpuidle', 'for-next/rng', 'for-next/smpboot', 'for-next/tbi' and 'for-next/tlbi' into for-next/core
* for-next/52-bit-kva: (25 commits)
Support for 52-bit virtual addressing in kernel space
* for-next/cpu-topology: (9 commits)
Move CPU topology parsing into core code and add support for ACPI 6.3
* for-next/error-injection: (2 commits)
Support for function error injection via kprobes
* for-next/perf: (8 commits)
Support for i.MX8 DDR PMU and proper SMMUv3 group validation
* for-next/psci-cpuidle: (7 commits)
Move PSCI idle code into a new CPUidle driver
* for-next/rng: (4 commits)
Support for 'rng-seed' property being passed in the devicetree
* for-next/smpboot: (3 commits)
Reduce fragility of secondary CPU bringup in debug configurations
* for-next/tbi: (10 commits)
Introduce new syscall ABI with relaxed requirements for pointer tags
* for-next/tlbi: (6 commits)
Handle spurious page faults arising from kernel space
|
|
The 'K' constraint is a documented AArch64 machine constraint supported
by GCC for matching integer constants that can be used with a 32-bit
logical instruction. Unfortunately, some released compilers erroneously
accept the immediate '4294967295' for this constraint, which is later
refused by GAS at assembly time. This had led us to avoid the use of
the 'K' constraint altogether.
Instead, detect whether the compiler is up to the job when building the
kernel and pass the 'K' constraint to our 32-bit atomic macros when it
appears to be supported.
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Use the standard obj-y form to specify the sub-directories under
arch/arm64/. No functional change intended.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently, the timestamp of module linker scripts are not checked.
Add them to the dependency of modules so they are correctly rebuilt.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
KASAN_SHADOW_OFFSET is a constant that is supplied to gcc as a command
line argument and affects the codegen of the inline address sanetiser.
Essentially, for an example memory access:
*ptr1 = val;
The compiler will insert logic similar to the below:
shadowValue = *(ptr1 >> KASAN_SHADOW_SCALE_SHIFT + KASAN_SHADOW_OFFSET)
if (somethingWrong(shadowValue))
flagAnError();
This code sequence is inserted into many places, thus
KASAN_SHADOW_OFFSET is essentially baked into many places in the kernel
text.
If we want to run a single kernel binary with multiple address spaces,
then we need to do this with KASAN_SHADOW_OFFSET fixed.
Thankfully, due to the way the KASAN_SHADOW_OFFSET is used to provide
shadow addresses we know that the end of the shadow region is constant
w.r.t. VA space size:
KASAN_SHADOW_END = ~0 >> KASAN_SHADOW_SCALE_SHIFT + KASAN_SHADOW_OFFSET
This means that if we increase the size of the VA space, the start of
the KASAN region expands into lower addresses whilst the end of the
KASAN region is fixed.
Currently the arm64 code computes KASAN_SHADOW_OFFSET at build time via
build scripts with the VA size used as a parameter. (There are build
time checks in the C code too to ensure that expected values are being
derived). It is sufficient, and indeed is a simplification, to remove
the build scripts (and build time checks) entirely and instead provide
KASAN_SHADOW_OFFSET values.
This patch removes the logic to compute the KASAN_SHADOW_OFFSET in the
arm64 Makefile, and instead we adopt the approach used by x86 to supply
offset values in kConfig. To help debug/develop future VA space changes,
the Makefile logic has been preserved in a script file in the arm64
Documentation folder.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to allow for a KASAN shadow that changes size at boot time, one
must fix the KASAN_SHADOW_END for both 48 & 52-bit VAs and "grow" the
start address. Also, it is highly desirable to maintain the same
function addresses in the kernel .text between VA sizes. Both of these
requirements necessitate us to flip the kernel address space halves s.t.
the direct linear map occupies the lower addresses.
This patch puts the direct linear map in the lower addresses of the
kernel VA range and everything else in the higher ranges.
We need to adjust:
*) KASAN shadow region placement logic,
*) KASAN_SHADOW_OFFSET computation logic,
*) virt_to_phys, phys_to_virt checks,
*) page table dumper.
These are all small changes, that need to take place atomically, so they
are bundled into this commit.
As part of the re-arrangement, a guard region of 2MB (to preserve
alignment for fixed map) is added after the vmemmap. Otherwise the
vmemmap could intersect with IS_ERR pointers.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Using an old .config in combination with "make oldconfig" can cause
an incorrect detection of the compat compiler:
$ grep CROSS_COMPILE_COMPAT .config
CONFIG_CROSS_COMPILE_COMPAT_VDSO=""
$ make oldconfig && make
arch/arm64/Makefile:58: gcc not found, check CROSS_COMPILE_COMPAT.
Stop.
Accordingly to the section 7.2 of the GNU Make manual "Syntax of
Conditionals", "When the value results from complex expansions of
variables and functions, expansions you would consider empty may
actually contain whitespace characters and thus are not seen as
empty. However, you can use the strip function to avoid interpreting
whitespace as a non-empty value."
Fix the issue adding strip to the CROSS_COMPILE_COMPAT string
evaluation.
Reported-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- always require argument for --defconfig and remove the hard-coded
arch/$(ARCH)/defconfig path
- make arch/$(SRCARCH)/configs/defconfig the new default of defconfig
- some code cleanups
* tag 'kconfig-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove meaningless if-conditional in conf_read()
kconfig: Fix spelling of sym_is_changable
unicore32: rename unicore32_defconfig to defconfig
kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIG
kconfig: add static qualifier to expand_string()
kconfig: require the argument of --defconfig
kconfig: remove always false ifeq ($(KBUILD_DEFCONFIG,) conditional
|
|
Add vDSO compat support to the arm64 build system.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shijith Thotton <sthotton@marvell.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Huw Davies <huw@codeweavers.com>
Link: https://lkml.kernel.org/r/20190621095252.32307-16-vincenzo.frascino@arm.com
|
|
This is a GCC only option, which warns about ABI changes within GCC, so
unconditionally adding it breaks Clang with tons of:
warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option]
and link time failures:
ld.lld: error: undefined symbol: __efistub___stack_chk_guard
>>> referenced by arm-stub.c:73
(/home/nathan/cbl/linux/drivers/firmware/efi/libstub/arm-stub.c:73)
>>> arm-stub.stub.o:(__efistub_install_memreserve_table)
in archive ./drivers/firmware/efi/libstub/lib.a
These failures come from the lack of -fno-stack-protector, which is
added via cc-option in drivers/firmware/efi/libstub/Makefile. When an
unknown flag is added to KBUILD_CFLAGS, clang will noisily warn that it
is ignoring the option like above, unlike gcc, who will just error.
$ echo "int main() { return 0; }" > tmp.c
$ clang -Wno-psabi tmp.c; echo $?
warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option]
1 warning generated.
0
$ gcc -Wsometimes-uninitialized tmp.c; echo $?
gcc: error: unrecognized command line option
‘-Wsometimes-uninitialized’; did you mean ‘-Wmaybe-uninitialized’?
1
For cc-option to work properly with clang and behave like gcc, -Werror
is needed, which was done in commit c3f0d0bc5b01 ("kbuild, LLVMLinux:
Add -Werror to cc-option to support clang").
$ clang -Werror -Wno-psabi tmp.c; echo $?
error: unknown warning option '-Wno-psabi'
[-Werror,-Wunknown-warning-option]
1
As a consequence of this, when an unknown flag is unconditionally added
to KBUILD_CFLAGS, it will cause cc-option to always fail and those flags
will never get added:
$ clang -Werror -Wno-psabi -fno-stack-protector tmp.c; echo $?
error: unknown warning option '-Wno-psabi'
[-Werror,-Wunknown-warning-option]
1
This can be seen when compiling the whole kernel as some warnings that
are normally disabled (see below) show up. The full list of flags
missing from drivers/firmware/efi/libstub are the following (gathered
from diffing .arm64-stub.o.cmd):
-fno-delete-null-pointer-checks
-Wno-address-of-packed-member
-Wframe-larger-than=2048
-Wno-unused-const-variable
-fno-strict-overflow
-fno-merge-all-constants
-fno-stack-check
-Werror=date-time
-Werror=incompatible-pointer-types
-ffreestanding
-fno-stack-protector
Use cc-disable-warning so that it gets disabled for GCC and does nothing
for Clang.
Fixes: ebcc5928c5d9 ("arm64: Silence gcc warnings about arch ABI drift")
Link: https://github.com/ClangBuiltLinux/linux/issues/511
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Until recently, if KBUILD_DEFCONFIG was not set by the arch Makefile,
the default path arch/*/defconfig was used.
The last users of the default are gone by the following commits:
- Commit f3e20ad67b4c ("s390: move arch/s390/defconfig to
arch/s390/configs/defconfig")
- Commit 986a13769c4b ("alpha: move arch/alpha/defconfig to
arch/alpha/configs/defconfig")
Let's set arch/*/configs/defconfig as a new default. This saves
KBUILD_DEFCONFIG for some architectures.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since GCC 9, the compiler warns about evolution of the
platform-specific ABI, in particular relating for the marshaling of
certain structures involving bitfields.
The kernel is a standalone binary, and of course nobody would be
so stupid as to expose structs containing bitfields as function
arguments in ABI. (Passing a pointer to such a struct, however
inadvisable, should be unaffected by this change. perf and various
drivers rely on that.)
So these warnings do more harm than good: turn them off.
We may miss warnings about future ABI drift, but that's too bad.
Future ABI breaks of this class will have to be debugged and fixed
the traditional way unless the compiler evolves finer-grained
diagnostics.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Tag-based KASAN uses 1 shadow byte for 16 bytes of kernel memory, so it
requires 1/16th of the kernel virtual address space for the shadow memory.
This commit sets KASAN_SHADOW_SCALE_SHIFT to 4 when the tag-based KASAN
mode is enabled.
Link: http://lkml.kernel.org/r/308b6bd49f756bb5e533be93c6f085ba99b30339.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This enables the use of per-task stack canary values if GCC has
support for emitting the stack canary reference relative to the
value of sp_el0, which holds the task struct pointer in the arm64
kernel.
The $(eval) extends KBUILD_CFLAGS at the moment the make rule is
applied, which means asm-offsets.o (which we rely on for the offset
value) is built without the arguments, and everything built afterwards
has the options set.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
readelf complains about the section layout of vmlinux when building
with CONFIG_RELOCATABLE=y (for KASLR):
readelf: Warning: [21]: Link field (0) should index a symtab section.
readelf: Warning: [21]: Info field (0) should index a relocatable section.
Also, it seems that our use of '-pie -shared' is contradictory, and
thus ambiguous. In general, the way KASLR is wired up at the moment
is highly tailored to how ld.bfd happens to implement (and conflate)
PIE executables and shared libraries, so given the current effort to
support other toolchains, let's fix some of these issues as well.
- Drop the -pie linker argument and just leave -shared. In ld.bfd,
the differences between them are unclear (except for the ELF type
of the produced image [0]) but lld chokes on seeing both at the
same time.
- Rename the .rela output section to .rela.dyn, as is customary for
shared libraries and PIE executables, so that it is not misidentified
by readelf as a static relocation section (producing the warnings
above).
- Pass the -z notext and -z norelro options to explicitly instruct the
linker to permit text relocations, and to omit the RELRO program
header (which requires a certain section layout that we don't adhere
to in the kernel). These are the defaults for current versions of
ld.bfd.
- Discard .eh_frame and .gnu.hash sections to avoid them from being
emitted between .head.text and .text, screwing up the section layout.
These changes only affect the ELF image, and produce the same binary
image.
[0] b9dce7f1ba01 ("arm64: kernel: force ET_DYN ELF type for ...")
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Smith <peter.smith@linaro.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
- fix W+X page (mark RO) allocated by the arm64 kprobes code
- Makefile fix for .i files in out of tree modules
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kprobe: make page to RO mode when allocate it
arm64: kdump: fix small typo
arm64: makefile fix build of .i file in external module case
|
|
After 'a66649dab350 arm64: fix vdso-offsets.h dependency' if
one will try to build .i file in case of external kernel module,
build fails complaining that prepare0 target is missing. This
issue came up with SystemTap when it tries to build variety
of .i files for its own generated kernel modules trying to
figure given kernel features/capabilities.
The issue is that prepare0 is defined in top level Makefile
only if KBUILD_EXTMOD is not defined. .i file rule depends
on prepare and in case KBUILD_EXTMOD defined top level Makefile
contains empty rule for prepare. But after mentioned commit
arch/arm64/Makefile would introduce dependency on prepare0
through its own prepare target.
Fix it to put proper ifdef KBUILD_EXTMOD around code introduced
by mentioned commit. It matches what top level Makefile does.
Acked-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There is nothing arch specific about building dtb files other than their
location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
The dependencies and supported targets are all slightly different.
Also, a cross-compiler for each arch is needed, but really the host
compiler preprocessor is perfectly fine for building dtbs. Move the
build rules to a common location and remove the arch specific ones. This
is done in a single step to avoid warnings about overriding rules.
The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
These pull in several dependencies some of which need a target compiler
(specifically devicetable-offsets.h) and aren't needed to build dtbs.
All that is really needed is dtc, so adjust the dependencies to only be
dtc.
This change enables support 'dtbs_install' on some arches which were
missing the target.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-mips@linux-mips.org
Cc: nios2-dev@lists.rocketboards.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.
Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.
Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.
For some reason, LDFLAGS was not renamed.
Using a well-known variable like LDFLAGS may result in accidental
override of the variable.
Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.
I did not touch Makefiles under tools/ since the tools build system
is a different world.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A bunch of good stuff in here. Worth noting is that we've pulled in
the x86/mm branch from -tip so that we can make use of the core
ioremap changes which allow us to put down huge mappings in the
vmalloc area without screwing up the TLB. Much of the positive
diffstat is because of the rseq selftest for arm64.
Summary:
- Wire up support for qspinlock, replacing our trusty ticket lock
code
- Add an IPI to flush_icache_range() to ensure that stale
instructions fetched into the pipeline are discarded along with the
I-cache lines
- Support for the GCC "stackleak" plugin
- Support for restartable sequences, plus an arm64 port for the
selftest
- Kexec/kdump support on systems booting with ACPI
- Rewrite of our syscall entry code in C, which allows us to zero the
GPRs on entry from userspace
- Support for chained PMU counters, allowing 64-bit event counters to
be constructed on current CPUs
- Ensure scheduler topology information is kept up-to-date with CPU
hotplug events
- Re-enable support for huge vmalloc/IO mappings now that the core
code has the correct hooks to use break-before-make sequences
- Miscellaneous, non-critical fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
arm64: alternative: Use true and false for boolean values
arm64: kexec: Add comment to explain use of __flush_icache_range()
arm64: sdei: Mark sdei stack helper functions as static
arm64, kaslr: export offset in VMCOREINFO ELF notes
arm64: perf: Add cap_user_time aarch64
efi/libstub: Only disable stackleak plugin for arm64
arm64: drop unused kernel_neon_begin_partial() macro
arm64: kexec: machine_kexec should call __flush_icache_range
arm64: svc: Ensure hardirq tracing is updated before return
arm64: mm: Export __sync_icache_dcache() for xen-privcmd
drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory
arm64: Add support for STACKLEAK gcc plugin
arm64: Add stack information to on_accessible_stack
drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported
arm64: fix ACPI dependencies
rseq/selftests: Add support for arm64
arm64: acpi: fix alignment fault in accessing ACPI
efi/arm: map UEFI memory map even w/o runtime services enabled
efi/arm: preserve early mapping of UEFI memory map longer for BGRT
drivers: acpi: add dependency of EFI for arm64
...
|
|
Not all toolchains have the baremetal elf targets, RedHat/Fedora ones
in particular. So, probe for whether it's available and use the previous
(linux) targets if it isn't.
Reported-by: Laura Abbott <labbott@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
This reverts commit 38fc4248677552ce35efc09902fdcb06b61d7ef9.
Distributions such as Fedora and Debian do not package the ELF linker
scripts with their toolchains, resulting in kernel build failures such
as:
| CHK include/generated/compile.h
| LD [M] arch/arm64/crypto/sha512-ce.o
| aarch64-linux-gnu-ld: cannot open linker script file ldscripts/aarch64elf.xr: No such file or directory
| make[1]: *** [scripts/Makefile.build:530: arch/arm64/crypto/sha512-ce.o] Error 1
| make: *** [Makefile:1029: arch/arm64/crypto] Error 2
Revert back to the linux targets for now, adding a comment to the Makefile
so we don't accidentally break this in the future.
Cc: Paul Kocialkowski <contact@paulk.fr>
Cc: <stable@vger.kernel.org>
Fixes: 38fc42486775 ("arm64: Use aarch64elf and aarch64elfb emulation mode variants")
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Linking the ARM64 defconfig kernel with LLVM lld fails with the error:
ld.lld: error: unknown argument: -p
Makefile:1015: recipe for target 'vmlinux' failed
Without this flag, the ARM64 defconfig kernel successfully links with
lld and boots on Dragonboard 410c.
After digging through binutils source and changelogs, it turns out that
-p is only relevant to ancient binutils installations targeting 32-bit
ARM. binutils accepts -p for AArch64 too, but it's always been
undocumented and silently ignored. A comment in
ld/emultempl/aarch64elf.em explains that it's "Only here for backwards
compatibility".
Since this flag is a no-op on ARM64, we can safely drop it.
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
With the recent syntax extension, Kconfig is now able to evaluate the
compiler / toolchain capability.
However, accumulating flags to 'LD' is not compatible with the way
it works; 'LD' must be passed to Kconfig to call $(ld-option,...)
from Kconfig files. If you tweak 'LD' in arch Makefile depending on
CONFIG_CPU_BIG_ENDIAN, this would end up with circular dependency
between Makefile and Kconfig.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The aarch64linux and aarch64linuxb emulation modes are not supported by
bare-metal toolchains and Linux using them forbids building the kernel
with these toolchains.
Since there is apparently no reason to target these emulation modes, the
more generic elf modes are used instead, allowing to build on bare-metal
toolchains as well as the already-supported ones.
Fixes: 3d6a7b99e3fa ("arm64: ensure the kernel is compiled for LP64")
Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This becomes much neater in Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
By default, sparse assumes a 64bit machine when compiled on x86-64
and 32bit when compiled on anything else.
This can of course create all sort of problems for the other archs, like
issuing false warnings ('shift too big (32) for type unsigned long'), or
worse, failing to emit legitimate warnings.
Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT,
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the now unneeded -m32/-m64 in arch specific Makefiles.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Commit fb8722735f50 ("arm64: support __int128 on gcc 5+") added support
for arm64 __int128 with gcc with a version-conditional, but neglected to
enable this for clang, which in fact appears to support aarch64 __int128.
This commit therefore enables it if the compiler is clang, using the
same type of makefile conditional used elsewhere in the tree.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Working around Cortex-A53 erratum #843419 involves special handling of
ADRP instructions that end up in the last two instruction slots of a
4k page, or whose output register gets overwritten without having been
read. (Note that the latter instruction sequence is never emitted by
a properly functioning compiler, which is why it is disregarded by the
handling of the same erratum in the bfd.ld linker which we rely on for
the core kernel)
Normally, this gets taken care of by the linker, which can spot such
sequences at final link time, and insert a veneer if the ADRP ends up
at a vulnerable offset. However, linux kernel modules are partially
linked ELF objects, and so there is no 'final link time' other than the
runtime loading of the module, at which time all the static relocations
are resolved.
For this reason, we have implemented the #843419 workaround for modules
by avoiding ADRP instructions altogether, by using the large C model,
and by passing -mpc-relative-literal-loads to recent versions of GCC
that may emit adrp/ldr pairs to perform literal loads. However, this
workaround forces us to keep literal data mixed with the instructions
in the executable .text segment, and literal data may inadvertently
turn into an exploitable speculative gadget depending on the relative
offsets of arbitrary symbols.
So let's reimplement this workaround in a way that allows us to switch
back to the small C model, and to drop the -mpc-relative-literal-loads
GCC switch, by patching affected ADRP instructions at runtime:
- ADRP instructions that do not appear at 4k relative offset 0xff8 or
0xffc are ignored
- ADRP instructions that are within 1 MB of their target symbol are
converted into ADR instructions
- remaining ADRP instructions are redirected via a veneer that performs
the load using an unaffected movn/movk sequence.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: tidied up ADRP -> ADR instruction patching.]
[will: use ULL suffix for 64-bit immediate]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
This is a follow up patch to the series I sent recently that cleans up
KASAN_SHADOW_SCALE_SHIFT usage (which value was hardcoded and scattered
all over the code). This fixes the one place that I forgot to fix.
The change is purely aesthetical, instead of hardcoding the value for
KASAN_SHADOW_SCALE_SHIFT in arch/arm64/Makefile, an appropriate variable
is declared and used.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
When building the arm64 kernel with both CONFIG_ARM64_MODULE_PLTS and
CONFIG_DYNAMIC_FTRACE enabled, the ftrace-mod.o object file is built
with the kernel and contains a trampoline that is linked into each
module, so that modules can be loaded far away from the kernel and
still reach the ftrace entry point in the core kernel with an ordinary
relative branch, as is emitted by the compiler instrumentation code
dynamic ftrace relies on.
In order to be able to build out of tree modules, this object file
needs to be included into the linux-headers or linux-devel packages,
which is undesirable, as it makes arm64 a special case (although a
precedent does exist for 32-bit PPC).
Given that the trampoline essentially consists of a PLT entry, let's
not bother with a source or object file for it, and simply patch it
in whenever the trampoline is being populated, using the existing
PLT support routines.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Versions of gcc prior to gcc 5 emitted a __multi3 function call when
dealing with TI types, resulting in failures when trying to link to
libgcc, and more generally, bad performance. However, since gcc 5,
the compiler supports actually emitting fast instructions, which means
we can at long last enable this option and receive the speedups.
The gcc commit that added proper Aarch64 support is:
https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=d1ae7bb994f49316f6f63e6173f2931e837a351d
This commit appears to be part of the gcc 5 release.
There are still a few instructions, __ashlti3 and __ashrti3, which
require libgcc, which is fine. Rather than linking to libgcc, we
simply provide them ourselves, since they're not that complicated.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
binutils 2.27
Upon upgrading to binutils 2.27, we found that our lz4 and gzip
compressed kernel images were significantly larger, resulting is 10ms
boot time regressions.
As noted by Rahul:
"aarch64 binaries uses RELA relocations, where each relocation entry
includes an addend value. This is similar to x86_64. On x86_64, the
addend values are also stored at the relocation offset for relative
relocations. This is an optimization: in the case where code does not
need to be relocated, the loader can simply skip processing relative
relocations. In binutils-2.25, both bfd and gold linkers did this for
x86_64, but only the gold linker did this for aarch64. The kernel build
here is using the bfd linker, which stored zeroes at the relocation
offsets for relative relocations. Since a set of zeroes compresses
better than a set of non-zero addend values, this behavior was resulting
in much better lz4 compression.
The bfd linker in binutils-2.27 is now storing the actual addend values
at the relocation offsets. The behavior is now consistent with what it
does for x86_64 and what gold linker does for both architectures. The
change happened in this upstream commit:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=1f56df9d0d5ad89806c24e71f296576d82344613
Since a bunch of zeroes got replaced by non-zero addend values, we see
the side effect of lz4 compressed image being a bit bigger.
To get the old behavior from the bfd linker, "--no-apply-dynamic-relocs"
flag can be used:
$ LDFLAGS="--no-apply-dynamic-relocs" make
With this flag, the compressed image size is back to what it was with
binutils-2.25.
If the kernel is using ASLR, there aren't additional runtime costs to
--no-apply-dynamic-relocs, as the relocations will need to be applied
again anyway after the kernel is relocated to a random address.
If the kernel is not using ASLR, then presumably the current default
behavior of the linker is better. Since the static linker performed the
dynamic relocs, and the kernel is not moved to a different address at
load time, it can skip applying the relocations all over again."
Some measurements:
$ ld -v
GNU ld (binutils-2.25-f3d35cf6) 2.25.51.20141117
^
$ ls -l vmlinux
-rwxr-x--- 1 ndesaulniers eng 300652760 Oct 26 11:57 vmlinux
$ ls -l Image.lz4-dtb
-rw-r----- 1 ndesaulniers eng 16932627 Oct 26 11:57 Image.lz4-dtb
$ ld -v
GNU ld (binutils-2.27-53dd00a1) 2.27.0.20170315
^
pre patch:
$ ls -l vmlinux
-rwxr-x--- 1 ndesaulniers eng 300376208 Oct 26 11:43 vmlinux
$ ls -l Image.lz4-dtb
-rw-r----- 1 ndesaulniers eng 18159474 Oct 26 11:43 Image.lz4-dtb
post patch:
$ ls -l vmlinux
-rwxr-x--- 1 ndesaulniers eng 300376208 Oct 26 12:06 vmlinux
$ ls -l Image.lz4-dtb
-rw-r----- 1 ndesaulniers eng 16932466 Oct 26 12:06 Image.lz4-dtb
By Siqi's measurement w/ gzip:
binutils 2.27 with this patch (with --no-apply-dynamic-relocs):
Image 41535488
Image.gz 13404067
binutils 2.27 without this patch (without --no-apply-dynamic-relocs):
Image 41535488
Image.gz 14125516
Any compression scheme should be able to get better results from the
longer runs of zeros, not just GZIP and LZ4.
10ms boot time savings isn't anything to get excited about, but users of
arm64+compression+bfd-2.27 should not have to pay a penalty for no
runtime improvement.
Reported-by: Gopinath Elanchezhian <gelanchezhian@google.com>
Reported-by: Sindhuri Pentyala <spentyala@google.com>
Reported-by: Wei Wang <wvw@google.com>
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Rahul Chaudhry <rahulchaudhry@google.com>
Suggested-by: Siqi Lin <siqilin@google.com>
Suggested-by: Stephen Hines <srhines@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: added comment to Makefile]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The kernel needs to be compiled as a LP64 binary for ARM64, even when
using a compiler that defaults to code-generation for the ILP32 ABI.
Consequently, we need to explicitly pass '-mabi=lp64' (supported on
gcc-4.9 and newer).
Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
ARM64 depends on the macro __AARCH64EB__ being defined or not
to correctly select or define endian-specific macros, structures
or pieces of code.
This macro is predefined by the compiler but sparse knows nothing
about it and thus may pre-process files differently from what
gcc would.
Fix this by passing '-D__AARCH64EL__' or '-D__AARCH64EB__' to
sparse depending of the endianness of the kernel, like defined
by GCC.
Note: In most case it won't change anything since most arm64 use
little-endian (but an allyesconfig would use big-endian!).
CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Will Deacon <will.deacon@arm.com>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
When using sparse on the arm64 tree we get many thousands of
warnings like 'constant ... is so big it is unsigned long long'
or 'shift too big (32) for type unsigned long'. This happens
because by default sparse considers the machine as 32bit and
defines the size of the types accordingly.
Fix this by passing the '-m64' flag to sparse so that
sparse can correctly define longs as being 64bit.
CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Will Deacon <will.deacon@arm.com>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Currently, dynamic ftrace support in the arm64 kernel assumes that all
core kernel code is within range of ordinary branch instructions that
occur in module code, which is usually the case, but is no longer
guaranteed now that we have support for module PLTs and address space
randomization.
Since on arm64, all patching of branch instructions involves function
calls to the same entry point [ftrace_caller()], we can emit the modules
with a trampoline that has unlimited range, and patch both the trampoline
itself and the branch instruction to redirect the call via the trampoline.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: minor clarification to smp_wmb() comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull misc Kbuild updates from Masahiro Yamada:
- clean up builddeb script
- use full path for KBUILD_IMAGE to fix rpm-pkg build
- fix objdiff tool to ignore debug info
* tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
builddeb: fix typo
builddeb: Update a few outdated and hardcoded strings
deb-pkg: Remove the KBUILD_IMAGE workaround
unicore32: Use full path in KBUILD_IMAGE definition
sh: Use full path in KBUILD_IMAGE definition
arc: Use full path in KBUILD_IMAGE definition
arm: Use full path in KBUILD_IMAGE definition
arm64: Use full path in KBUILD_IMAGE definition
scripts: objdiff: Ignore debug info when comparing
|
|
Since bbb56c27228d ("arm64: Add detection code for broken .inst support
in binutils"), running any make target that doesn't involve the cross
compiler results in a spurious warning:
$ make ARCH=arm64 menuconfig
arch/arm64/Makefile:43: Detected assembler with broken .inst; disassembly will be unreliable
while
$ make ARCH=arm64 CROSS_COMPILE=aarch64-arm-linux- menuconfig
is silent (assuming your compiler is not affected). That's because
the code that tests for the workaround is always run, irrespective
of the current configuration being available or not.
An easy fix is to make the detection conditional on CONFIG_ARM64
being defined, which is only the case when actually building
something.
Fixes: bbb56c27228d ("arm64: Add detection code for broken .inst support in binutils")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The KBUILD_IMAGE variable is used by the rpm and deb-pkg targets, which
expect it to point to the image file in the build directory. The
builddeb script has a workaround for architectures which only provide
the basename, but let's provide a clean interface for packaging tools.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Michal Marek <mmarek@suse.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Binutils version up to (and including) 2.25 have a pathological
behaviour when it comes to mixing .inst directive and arithmetic
involving labels. The assembler complains about non-constant
expressions and compilation stops pretty quickly.
In order to detect this and work around it, let's add a bit of
detection code that will set the CONFIG_BROKEN_GAS_INST option
should a broken gas be detected.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
