summaryrefslogtreecommitdiff
path: root/arch/arm/mach-zynq
AgeCommit message (Collapse)Author
2013-05-07Merge tag 'soc-for-linus-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...
2013-05-04Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
2013-04-09ARM: Push selects for TWD/SCU into machine entriesStephen Boyd
The TWD and SCU configs are selected by default as long as MSM_SCORPIONMP is false and/or MCT is false. Implementing the logic this way certainly saves lines in the Kconfig but it precludes those machines which select MSM_SCORPIONMP or MCT from participating in the single zImage effort because when those machines are combined with other SMP capable machines the TWD and SCU are no longer selected by default. Push the select out to the machine entries so that we can compile these machines together and still select the appropriate configs. Cc: Barry Song <baohua.song@csr.com> Acked-by: David Brown <davidb@codeaurora.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Simon Horman <horms@verge.net.au> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-08Merge branch 'gic/cleanup' into next/soc2Arnd Bergmann
Both zynq and shmobile have conflicts against the gic cleanup series, resolved here. Conflicts: arch/arm/mach-shmobile/smp-emev2.c arch/arm/mach-shmobile/smp-r8a7779.c arch/arm/mach-shmobile/smp-sh73a0.c arch/arm/mach-zynq/platsmp.c drivers/gpio/gpio-pl061.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-04arm: zynq: Add hotplug supportMichal Simek
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04arm: zynq: Add smp supportMichal Simek
Zynq is dual core Cortex A9 which starts always at zero. Using simple trampoline ensure long jump to secondary_startup code. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
2013-04-04arm: zynq: Get rid of xilinx function prefixMichal Simek
Xilinx is vendor name not SoC name. Use zynq instead. Also remove one checkpatch warning: WARNING: static const char * array should probably be static const char * const +static const char *xilinx_dt_match[] = { Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04arm: zynq: Add support for system resetMichal Simek
Do system reset via slcr registers. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04arm: zynq: Move slcr initialization to separate fileMichal Simek
Create separate slcr driver instead of polluting common code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04arm: zynq: Load scu baseaddress at run timeMichal Simek
Use Cortex a9 cp15 to read scu baseaddress. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04arm: zynq: Move timer to generic locationMichal Simek
Move zynq timer out of mach folder to generic location and enable it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04arm: zynq: Do not use xilinx specific function namesMichal Simek
Remove all xilinx specific names from the driver because this is generic driver for cadence ttc. xttc->ttc ttcps->ttc ... No functional changes in this driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04arm: zynq: Move timer to clocksource interfaceMichal Simek
Use clocksource timer initialization. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04arm: zynq: Use standard timer bindingMichal Simek
Use cdns,ttc because this driver is Cadence Rev06 Triple Timer Counter and everybody can use it without xilinx specific function name or probing. Also use standard dt description for timer and also prepare for moving to clocksource initialization. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-01-28arm: zynq: timer: Set clock_event cpumaskSoren Brinkmann
The timers are common to both A9 cores, so let's set the clock event struct's cpumask accordingly, to all possible CPUs. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28arm: zynq: timer: Fix comment styleSoren Brinkmann
Fixing multi line comment style at two locations. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28arm: zynq: timer: Remove redundant #includesSoren Brinkmann
Some #includes are implicitly included through others, some are just not needed. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28arm: zynq: timer: Align columnsSoren Brinkmann
Aligning the columns in a block of #defines, so that the values are starting in the same colum on every line. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28arm: zynq: timer: Remove unused #definesSoren Brinkmann
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: John Linn <john.linn@xilinx.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28arm: zynq: timer: Remove unnecessary register writeSoren Brinkmann
Acknowedging an interrupt requires to read the interrupt register only. The write was only required to work around a bug in the QEMU implementation of the TTC, which is fixed. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28arm: zynq: timer: Replace PSS through PSSoren Brinkmann
The acronym PSS is deprecated by Xilinx. The correct term, which is also used in Xilinx documentation is PS (processing system). This is just a search and replace: - s/PSS/PS/g - s/pss/ps/g Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28arm: zynq: Add missing irqchip.h to common.cMichal Simek
The patch: "ARM: use common irqchip_init for GIC init" (sha1: 0529e315bbda5d502c93df2cfafba9bb337fbdf4) should also add linux/irqchip.h header. Error message: arch/arm/mach-zynq/common.c:99:14: error: 'irqchip_init' undeclared here (not in a function) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-01-14Merge tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson
into next/cleanup From Rob Herring: Initial irqchip init infrastructure and GIC and VIC clean-ups This creates irqchip initialization infrastructure from Thomas Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips and adapted to use the new infrastructure. All DT enabled platforms using GIC and VIC are converted over to use the new irqchip_init. * tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux: irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h ARM: picoxcell: use common irqchip_init function ARM: spear: use common irqchip_init function irqchip: Move ARM VIC to drivers/irqchip ARM: samsung: remove unused tick.h ARM: remove unneeded vic.h includes ARM: remove mach .handle_irq for VIC users ARM: VIC: set handle_arch_irq in VIC initialization ARM: VIC: shrink down vic.h irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h ARM: use common irqchip_init for GIC init irqchip: Move ARM GIC to drivers/irqchip ARM: remove mach .handle_irq for GIC users ARM: GIC: set handle_arch_irq in GIC initialization ARM: GIC: remove direct use of gic_raise_softirq ARM: GIC: remove assembly ifdefs from gic.h ARM: mach-ux500: use SGI0 to wake up the other core arm: add set_handle_irq() to register the parent IRQ controller handler function irqchip: add basic infrastructure irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS Fixed up massive merge conflicts with the timer cleanup due to adjacent changes: Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-bcm/board_bcm.c arch/arm/mach-cns3xxx/cns3420vb.c arch/arm/mach-ep93xx/adssphere.c arch/arm/mach-ep93xx/edb93xx.c arch/arm/mach-ep93xx/gesbc9312.c arch/arm/mach-ep93xx/micro9.c arch/arm/mach-ep93xx/simone.c arch/arm/mach-ep93xx/snappercl15.c arch/arm/mach-ep93xx/ts72xx.c arch/arm/mach-ep93xx/vision_ep9307.c arch/arm/mach-highbank/highbank.c arch/arm/mach-imx/mach-imx6q.c arch/arm/mach-msm/board-dt-8960.c arch/arm/mach-netx/nxdb500.c arch/arm/mach-netx/nxdkn.c arch/arm/mach-netx/nxeb500hmi.c arch/arm/mach-nomadik/board-nhk8815.c arch/arm/mach-picoxcell/common.c arch/arm/mach-realview/realview_eb.c arch/arm/mach-realview/realview_pb1176.c arch/arm/mach-realview/realview_pb11mp.c arch/arm/mach-realview/realview_pba8.c arch/arm/mach-realview/realview_pbx.c arch/arm/mach-socfpga/socfpga.c arch/arm/mach-spear13xx/spear1310.c arch/arm/mach-spear13xx/spear1340.c arch/arm/mach-spear13xx/spear13xx.c arch/arm/mach-spear3xx/spear300.c arch/arm/mach-spear3xx/spear310.c arch/arm/mach-spear3xx/spear320.c arch/arm/mach-spear3xx/spear3xx.c arch/arm/mach-spear6xx/spear6xx.c arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/board-dt-tegra30.c arch/arm/mach-u300/core.c arch/arm/mach-ux500/board-mop500.c arch/arm/mach-ux500/cpu-db8500.c arch/arm/mach-versatile/versatile_ab.c arch/arm/mach-versatile/versatile_dt.c arch/arm/mach-versatile/versatile_pb.c arch/arm/mach-vexpress/v2m.c include/asm-generic/vmlinux.lds.h
2013-01-12ARM: use common irqchip_init for GIC initRob Herring
Convert all GIC DT initialization over to use common irqchip_init function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2013-01-12ARM: remove mach .handle_irq for GIC usersRob Herring
Now that the GIC initialization sets up the handle_arch_irq pointer, we can remove it for all machines and make it static. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-12-24ARM: delete struct sys_timerStephen Warren
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-21ARM: zynq: Remove all unused mach headersMichal Simek
Remove empty unused mach/hardware.h. mach/irqs.h is unused because SPARSE_IRQ are ON by default. mach/timex.h is unused because of CONFIG_ARCH_MULTIPLATFORM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2012-11-21ARM: zynq: add support for ARCH_MULTIPLATFORMJosh Cartwright
The majority of changes are necessary to remove dependencies on header files within arch/arm/mach-zynq/include/mach: uncompress.h - Deleted. It is unused for ARCH_MULTIPLATFORM builds. uart.h: - Move uart definitions out of uart.h into debug/zynq.S, which is now the only user zynq_soc.h: - Move SCU address definitions into common.c. - Other #defines, such as PERIPHERAL_CLOCK_RATE, TTC0_BASE, etc, are unused and can be dropped Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-21ARM: zynq: make use of debug_ll_io_init()Josh Cartwright
Convert low-level debugging routines to make use of debug_ll_io_init(). This is part of the preparation for ARCH_MULTIPLATFORM support for Zynq. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-21ARM: zynq: remove TTC early mappingJosh Cartwright
Now that the TTC driver has proper support for DT bindings, it is not necessary for the registers to be mapped early. They will be mapped during clock initialization using of_iomap(). Remove the early mapping. In addition, remove the extraneous zynq_soc.h include from the timer driver. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-14ARM: zynq: add clk binding support to the ttcJosh Cartwright
Add support for retrieving TTC configuration from device tree. This includes the ability to pull information about the driving clocks from the of_clk bindings. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-14ARM: zynq: use zynq clk bindingsJosh Cartwright
Make the Zynq platform use the newly created zynq clk bindings. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-12ARM: zynq: dts: split up device treeJosh Cartwright
The purpose of the created zynq-7000.dtsi file is to describe the hardware common to all Zynq 7000-based boards. Also, get rid of the zynq-ep107 device tree, since it is not hardware anyone can purchase. Add a zc702 dts file based on the zynq-7000.dtsi. Add it to the dts/Makefile so it is built with the 'dtbs' target. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-07ARM: zynq: Allow UART1 to be used as DEBUG_LL console.Nick Bowler
The main UART on the Xilinx ZC702 board is UART1, located at address e0001000. Add a Kconfig option to select this device as the low-level debugging port. This allows the really early boot printouts to reach the USB serial adaptor on this board. For consistency's sake, add a choice entry for UART0 even though it is the the default if UART1 is not selected. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-05ARM: zynq: move arm-specific sys_timer out of ttcJosh Cartwright
Move the sys_timer definition out of ttc driver and make it part of the common zynq code. This is preparation for renaming and COMMON_CLK support. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-10-29zynq: move static peripheral mappingsJosh Cartwright
Shifting them up into the vmalloc region prevents the following warning, when booting a zynq qemu target with more than 512mb of RAM: BUG: mapping for 0xe0000000 at 0xe0000000 out of vmalloc space In addition, it allows for reuse of these mappings when the proper drivers issue requests via ioremap(). There are currently unknown issues with the early uart mapping. For now, the uart will be mapped to a known working address. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-10-29zynq: remove use of CLKDEV_LOOKUPJosh Cartwright
The Zynq support in mainline does not (yet) make use of any of the generic clk or clk lookup functionality. Remove what is upstream for now, until the out-of-tree implementation is in suitable form for merging. An important side effect of this patch is that it allows the building of a Zynq kernel without running into unresolved symbol problems: drivers/built-in.o: In function `amba_get_enable_pclk': clkdev.c:(.text+0x444): undefined reference to `clk_enable' drivers/built-in.o: In function `amba_remove': clkdev.c:(.text+0x488): undefined reference to `clk_disable' drivers/built-in.o: In function `amba_probe': clkdev.c:(.text+0x540): undefined reference to `clk_disable' drivers/built-in.o: In function `amba_device_add': clkdev.c:(.text+0x77c): undefined reference to `clk_disable' drivers/built-in.o: In function `enable_clock': clkdev.c:(.text+0x29738): undefined reference to `clk_enable' drivers/built-in.o: In function `disable_clock': clkdev.c:(.text+0x29778): undefined reference to `clk_disable' drivers/built-in.o: In function `__pm_clk_remove': clkdev.c:(.text+0x297f8): undefined reference to `clk_disable' drivers/built-in.o: In function `pm_clk_suspend': clkdev.c:(.text+0x29bc8): undefined reference to `clk_disable' drivers/built-in.o: In function `pm_clk_resume': clkdev.c:(.text+0x29c28): undefined reference to `clk_enable' make[2]: *** [vmlinux] Error 1 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 In addition, eliminate Zynq's "use" of the versatile platform, as it is no longer needed. As Nick Bowler points out: For the record, I think this was introduced by commit 56a34b03ff427 ("ARM: versatile: Make plat-versatile clock optional") which forgot to select PLAT_VERSATILE_CLOCK on Zynq. This is not all that surprising, because the fact that Zynq "uses" PLAT_VERSATILE is secretly hidden in the Makefile. Nevertheless, the only feature from versatile that Zynq needed was the clock support, so this patch should *also* delete the secret use of plat-versatile by removing this line from arch/arm/Makefile: plat-$(CONFIG_ARCH_ZYNQ) += versatile Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-10-29zynq: use pl310 device tree bindingsJosh Cartwright
The Zynq has a PL310 L2 cache controller. Convert in-tree uses to using the device tree. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-10-29zynq: use GIC device tree bindingsJosh Cartwright
The Zynq uses the cortex-a9-gic. This eliminates the need to hardcode register addresses. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-03-06ARM: remove bunch of now unused mach/io.h filesRob Herring
Now that many platforms don't need mach/io.h, remove the unused ones. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-02-22Merge branch 'entry-macro-cleanup' of git://sources.calxeda.com/kernel/linux ↵Russell King
into for-armsoc
2012-02-21ARM: remove disable_fiq and arch_ret_to_user macrosRob Herring
Now that most platforms don't need disable_fiq and arch_ret_to_user macros, we can remove the empty macros or empty entry-macro.S files. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-01-20ARM: big removal of now unused arch_idle()Nicolas Pitre
When this is the only content remaining in mach/system.h then the whole file is removed. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-and-tested-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-05Merge branch 'restart' into for-linusRussell King
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05ARM: restart: remove the now empty arch_reset()Russell King
Remove the now empty arch_reset() from all the mach/system.h includes, and remove its callsite. Remove arm_machine_restart() as this function no longer does anything useful. For samsung platforms, remove the include of mach/system-reset.h and plat/system-reset.h from their respective mach/system.h headers as these just define their arch_reset functions. As a result, the s3c2410 and plat-samsung system-reset.h files are no longer referenced, so remove these files entirely. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: remove comments about adding code to arch_reset()Russell King
arch_reset() is deprecated; systems should hook into system restart via the 'restart' method in the platforms machine description record. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-05Merge branch 'vmalloc' of git://git.linaro.org/people/nico/linux into ↵Russell King
devel-stable
2011-11-26ARM: big removal of now unused vmalloc.h filesNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-11-15ARM: zynq: convert to CONFIG_MULTI_IRQ_HANDLERMarc Zyngier
Convert the zynq platform to be using the gic_handle_irq function as its primary interrupt handler. Acked-by: John Linn <john.linn@xilinx.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-10-28Merge branch 'devel-stable' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 14:31:44 +0000