summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)Author
2011-08-29Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: ARM: mach-shmobile: sh7372 CMT3 and CMT4 clock support ARM: mach-shmobile: sh7372 MSIOF clock support ARM: mach-shmobile: clock-sh7372: fixup USB-DMAC1 settings ARM: mach-shmobile: clock-sh73a0: tidyup CKSCR main clock selecter ARM: mach-shmobile: Remove 3DG/SGX from sh7372 INTCS ARM: mach-shmobile: mackerel: Add USB-DMA ID mmc: sdhi, mmcif: zboot: Correct clock disable logic ARM: mach-shmobile: ag5evm: SDHI requires waiting for idle ARM: static should be at beginning of declaration ARM: mach-shmobile: Use CMT2 for timer on sh7372 ARM: mach-shmobile: sh7372: Add USB-DMAC support
2011-08-29ARM: mach-shmobile: sh7372 CMT3 and CMT4 clock supportMagnus Damm
Add clock control support for sh7372 CMT hardware blocks. No upstream sh7372 boards are making use of CMT3 + CMT4, but the sh7372 hardware happens to come out of reset with all CMT MSTP clocks _enabled_, so to save power we need to implement a fix in software to shut down unused clocks. This patch relies on the recently merged 794d78f drivers: sh: late disabling of clocks V2 to make sure the unused clocks get disabled as expected. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29ARM: mach-shmobile: sh7372 MSIOF clock supportMagnus Damm
Add clock control support for sh7372 MSIOF hardware blocks. No upstream sh7372 boards are making use of MSIOF0->2, but the sh7372 hardware happens to come out of reset with all MSIOF MSTP clocks _enabled_, so to save power we need to implement a fix in software to shut down unused clocks. This patch relies on the recently merged 794d78f drivers: sh: late disabling of clocks V2 to make sure the unused clocks get disabled as expected. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29ARM: mach-shmobile: clock-sh7372: fixup USB-DMAC1 settingsKuninori Morimoto
USB-DMAC1 needs SMSTPCR4/MSTP407 controls, not MSTP214 this patch tested on mackerel board Reported-by: Magnus Damm <damm@opensource.se> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29ARM: mach-shmobile: clock-sh73a0: tidyup CKSCR main clock selecterKuninori Morimoto
MAINCKSEL is [29:28], not [27:24] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29ARM: mach-shmobile: Remove 3DG/SGX from sh7372 INTCSMagnus Damm
This patch removes support for the SGX interrupt source in the sh7372 INTCS controller. The SGX hardware block included in sh7372 is already hooked up to the ARM Cortex-A8 core using the INTCA controller, so SGX users are encouraged to make use of that interrupt source instead. Removing support for the SGX interrupt source in INTCS simplifies the sh7372 power management code by allowing us to assume that only INTCA needs to be powered on to operate the SGX hardware. If the INTCS interrupt source would be kept then the kernel would be forced to deal with additional dependencies that does not follow the regular power domain hiearachy. With this patch in place we can safely power down INTCS while the SGX is operating. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29Merge branch 'rmobile/dma' into rmobile-fixes-for-linusPaul Mundt
2011-08-27ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental)Magnus Damm
This patch updates the recently submitted "Associate the HDMI clock together with LCDC1 on sh7372" to V2 with the following change: - Use lcdc1_device on AP4EVB to build properly. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-24ARM: mach-shmobile: sh7372 LCDC1 suspend fixMagnus Damm
Associate the HDMI clock together with LCDC1 on sh7372. Without this patch Suspend-to-RAM hangs on the boards AP4EVB and Mackerel. The code hangs in the LCDC driver where the software is waiting forever for the hardware to power down. By explicitly associating the HDMI clock with LCDC1 we can make sure the HDMI clock is enabled using Runtime PM whenever the driver is accessing the hardware. This HDMI and LCDC1 dependency is documented in the sh7372 data sheet. Older kernels did work as expected but the recently merged (3.1-rc) 794d78f drivers: sh: late disabling of clocks V2 introduced code to turn off clocks lacking software reference which happens to include the HDMI clock that is needed by LCDC1 to operate as expected. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08ARM: mach-shmobile: mackerel: Add USB-DMA IDKuninori Morimoto
This patch use channel0 as Tx, and channel1 as Rx Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-08Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into rmobile-latest
2011-08-01Merge branch 'sh-latest' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits) SH: static should be at beginning of declaration sh: move CLKDEV_xxx_ID macro to sh_clk.h sh: clock-shx3: add CLKDEV_ICK_ID for cleanup sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: modify I2C clock settings sh: clock-sh7343: modify I2C clock settings sh: clock-sh7723: modify I2C clock settings sh: clock-sh7722: modify I2C clock settings sh: clock-sh7724: modify I2C clock settings serial: sh-sci: Fix up pretty name printing for port IRQs. serial: sh-sci: Kill off per-port enable/disable callbacks. serial: sh-sci: Add missing module description/author bits. serial: sh-sci: Regtype probing doesn't need to be fatal. sh: Tidy up pre-clkdev clk_get() error handling. ...
2011-07-30Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits) [media] ir-mce_kbd-decoder: include module.h for its facilities [media] ov5642: include module.h for its facilities [media] em28xx: Fix DVB-C maxsize for em2884 [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz [media] v4l: mt9v032: Fix Bayer pattern [media] V4L: mt9m111: rewrite set_pixfmt [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear [media] V4L: initial driver for ov5642 CMOS sensor [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails [media] V4L: soc-camera: remove soc-camera bus and devices on it [media] V4L: soc-camera: un-export the soc-camera bus [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier [media] V4L: add media bus configuration subdev operations [media] V4L: soc-camera: group struct field initialisations together [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks [media] V4L: pxa-camera: switch to using standard PM hooks [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param [media] Don't OOPS if videobuf_dvb_get_frontend return NULL [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision [media] omap3isp: Support configurable HS/VS polarities ... Fix up conflicts: - arch/arm/mach-omap2/board-rx51-peripherals.c: cleanup regulator supply definitions in mach-omap2 vs OMAP3: RX-51: define vdds_csib regulator supply - drivers/staging/tm6000/tm6000-alsa.c (trivial)
2011-07-27[media] V4L: soc-camera: remove soc-camera bus and devices on itGuennadi Liakhovetski
Now that v4l2 subdevices have got their own device objects, having one more device in soc-camera clients became redundant and confusing. This patch removes those devices and the soc-camera bus, they used to reside on. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifierGuennadi Liakhovetski
This moves us one more step closer to eliminating the soc-camera bus and devices on it. Besides, as a side effect, CSI-2 runtime PM on sh-mobile secomes finer grained now: we only have to power on the interface, when the device nodes are open. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-25Merge branch 'rmobile/sdio' into rmobile-latestPaul Mundt
2011-07-25ARM: mach-shmobile: ag5evm: SDHI requires waiting for idleSimon Horman
The SDHI block on the ag5evm requires waiting for idle before writing to some registers. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-07-24Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (237 commits) ARM: 7004/1: fix traps.h compile warnings ARM: 6998/2: kernel: use proper memory barriers for bitops ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM ARM: Fix build errors caused by adding generic macros ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU ARM: CPU hotplug: pass in proper affinity mask on IRQ migration ARM: GIC: avoid routing interrupts to offline CPUs ARM: CPU hotplug: fix abuse of irqdesc->node ARM: 6981/2: mmci: adjust calculation of f_min ARM: 7000/1: LPAE: Use long long printk format for displaying the pud ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence ARM: ARM_DMA_ZONE_SIZE is no more ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ...
2011-07-22Merge branches 'btc', 'dma', 'entry', 'fixes', 'linker-layout', 'misc', ↵Russell King
'mmci', 'suspend' and 'vfp' into for-next
2011-07-14ARM / shmobile: Return -EBUSY from A4LC power off if A3RV is activeRafael J. Wysocki
Since the A4LC should only be powered off if the A3RV is off, make the A4LC's power down routine return -EBUSY if A3RV is not off to indicate to the core that it doesn't want to power off the domain in that case. This will cause the core to regard A4LC as active, so the pm_genpd_poweron() in pd_power_down_a3rv() is not necessary any more. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-07-14ARM / shmobile: Use genpd_queue_power_off_work()Rafael J. Wysocki
Make pd_power_down_a3rv() use genpd_queue_power_off_work() to queue up the powering off of the A4LC domain to avoid queuing it up when it is pending. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-07-13ARM / shmobile: Use pm_genpd_poweroff_unused()Rafael J. Wysocki
Make shmobile use pm_genpd_poweroff_unused() instead of the open-coded powering off PM domains without devices in use. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-07-11Merge branch 'master' into for-nextJiri Kosina
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-11ARM: static should be at beginning of declarationJesper Juhl
Make sure that the 'static' keywork is at the beginning of declaration for arch/arm/mach-shmobile/board-ap4evb.c This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11ARM: static should be at beginning of declarationJesper Juhl
Make sure that the 'static' keywork is at the beginning of declaration for arch/arm/mach-shmobile/board-ap4evb.c This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-07-11ARM: mach-shmobile: Use CMT2 for timer on sh7372Magnus Damm
Switch the sh7372 CPU support to use CMT2 instead of CMT1 for system timer. CMT1 is located in the A3SP power domain while CMT2 is located in the always-on power domain C5. This improves our PM situation - with CMT2 as timer we can power down A3SP and still access the timer. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-07-11sh: move CLKDEV_xxx_ID macro to sh_clk.hKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-07-10ARM: mach-shmobile: sh7372 A3RV requires A4LCMagnus Damm
Add a power domain workaround for the VPU and A3RV on sh7372. The sh7372 data sheet mentions that the VPU is located in the A3RV power domain. The A3RV power domain is not related to A4LC in any way, but testing shows that unless A3RV _and_ A4LC are powered on the VPU test program will bomb out. This issue may be caused by a more or less undocumented dependency on the MERAM block that happens to be located in A4LC. So now we know that the out-of-reset requirement of the VPU is that the MERAM is powered on. This patch adds a workaround for A3RV to make sure A4LC is powered on - this so we can use the VPU even though the LCDCs are in blanking state and A4LC is supposed to be off. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-10ARM: mach-shmobile: sh7372 late pm domain offMagnus Damm
Add sh7372 specific code to power down unused pm domains. This should really be replaced by some generic PM core code IMO, but until that happens this patch makes sure we don't waste power by leaving unused power domains on. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-10ARM: mach-shmobile: Runtime PM late init callbackMagnus Damm
Add a mach-shmobile specific callback for SoC-specific code to hook into. By having the late_initcall() in a common place we can have multi-SoC/board support in the same kernel binary. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-10ARM: mach-shmobile: sh7372 D4 supportMagnus Damm
Add support for the sh7372 D4 power domain. This power domain contains the Coresight-ETM hardware block. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-10ARM: mach-shmobile: sh7372 A4MP supportKuninori Morimoto
Add support for the sh7372 A4MP power domain and hook up the FSI/SPU2 device. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-10ARM: mach-shmobile: sh7372: make sure that fsi is peripheral of spu2Kuninori Morimoto
FSI act as peripheral circuits of the SPU2. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-07ARM: 6993/1: platsmp: Allow secondary cpu hotplug with maxcpus=1Stephen Boyd
If an ARM system has multiple cpus in the same socket and the kernel is booted with maxcpus=1, secondary cpus are possible but not present due to how platform_smp_prepare_cpus() is called. Since most typical ARM processors don't actually support physical hotplug, initialize the present map to be equal to the possible map in generic ARM SMP code. Also, always call platform_smp_prepare_cpus() as long as max_cpus is non-zero (0 means no SMP) to allow platform code to do any SMP setup. After applying this patch it's possible to boot an ARM system with maxcpus=1 on the command line and then hotplug in secondary cpus via sysfs. This is more in line with how x86 does things. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-02ARM: mach-shmobile: sh7372 A3SG supportMagnus Damm
Add support for the sh7372 A3SG power domain. This domain contains the SGX hardware block, but there is no open source driver available. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02ARM: mach-shmobile: sh7372 A3RI supportMagnus Damm
Add support for the sh7372 A3RI power domain. This domain contains the ISP hardware block, but there is no driver available. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02ARM: mach-shmobile: sh7372 A3RV supportMagnus Damm
Add support for the sh7372 A3RV power domain and hook up the VPU device. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02ARM: mach-shmobile: sh7372 A4LC support for AP4EVBMagnus Damm
The AP4EVB board is also using a sh7372 SoC, so tie in A4LC support on that board as well. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02ARM / shmobile: Support for I/O power domains for SH7372 (v9)Rafael J. Wysocki
Use the generic power domains support introduced by the previous patch to implement support for power domains on SH7372. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Paul Mundt <lethal@linux-sh.org>
2011-07-02PM: Rename clock management functionsRafael J. Wysocki
The common PM clock management functions may be used for system suspend/resume as well as for runtime PM, so rename them accordingly. Modify kerneldoc comments describing these functions and kernel messages printed by them, so that they refer to power management in general rather that to runtime PM. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02PM / Domains: Rename struct dev_power_domain to struct dev_pm_domainRafael J. Wysocki
The naming convention used by commit 7538e3db6e015e890825fbd9f86599b (PM: Add support for device power domains), which introduced the struct dev_power_domain type for representing device power domains, evidently confuses some developers who tend to think that objects of this type must correspond to "power domains" as defined by hardware, which is not the case. Namely, at the kernel level, a struct dev_power_domain object can represent arbitrary set of devices that are mutually dependent power management-wise and need not belong to one hardware power domain. To avoid that confusion, rename struct dev_power_domain to struct dev_pm_domain and rename the related pointers in struct device and struct pm_clk_notifier_block from pwr_domain to pm_domain. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Kevin Hilman <khilman@ti.com>
2011-06-30ARM: mach-shmobile: make a struct in board-ap4evb.c staticGuennadi Liakhovetski
struct soc_camera_link imx074_link in board-ap4evb.c doesn't have to be global. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-29ARM: 6886/1: mmc, Add zboot from eSD support for SuperH Mobile ARMSimon Horman
This allows a ROM-able zImage to be written to eSD and for SuperH Mobile ARM to boot directly from the SDHI hardware block. This is achieved by the MaskROM loading the first portion of the image into MERAM and then jumping to it. This portion contains loader code which copies the entire image to SDRAM and jumps to it. From there the zImage boot code proceeds as normal, uncompressing the image into its final location and then jumping to it. Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Magnus Damm <magnus.damm@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-21ARM: mach-shmobile: sh7372: Add USB-DMAC supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-21ARM: mach-shmobile: ag5evm: consistently name sdhi info structuresSimon Horman
Name the SDHI1 instance sh_sdhi1_info to be consistent with sh_sdhi0_info. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-21ARM: mach-shmobile: mackerel: change usbhs devices orderKuninori Morimoto
USB1 can use IRQ interrupt and notify function for usbhs driver, but USB0 is using polling for it. The priority of usbhs devices order USB1 > USB0 is good idea Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-15ARM: mach-shmobile: mackerel: tidyup usbhs driver settingsKuninori Morimoto
- usb0 pipe is same as default. own pipe config is not needed - usb1 lost get_id function Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-14ARM: mach-shmobile: Correct SCIF port types for SH7367.Paul Mundt
While SH7377 and others were updated to properly use SCIFA/B port types, SH7367 was left behind. Fix it up accordingly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-14ARM: mach-shmobile: sh73a0 gic_arch_extn.irq_set_wake() fixMagnus Damm
Initialize ->irq_set_wake() in gic_arch_extn to unbreak wake up from the KEYSC device on AG5EVM in case of Suspend-to-RAM. Without this patch "echo mem > /sys/power/state" and a key press results in the following message on resume: WARNING: at kernel/irq/manage.c:507 irq_set_irq_wake+0x7c/0xd8() Unbalanced IRQ 103 wake disable Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 12:22:02 +0000