summaryrefslogtreecommitdiff
path: root/arch/arm/mach-sa1100
AgeCommit message (Collapse)Author
2018-06-14Merge branch 'i2c/for-4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - mainly feature additions to drivers (stm32f7, qup, xlp9xx, mlxcpld, ...) - conversion to use the i2c_8bit_addr_from_msg macro consistently - move includes to platform_data - core updates to allow the (still in review) I3C subsystem to connect - and the regular share of smaller driver updates * 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (68 commits) i2c: qup: fix building without CONFIG_ACPI i2c: tegra: Remove suspend-resume i2c: imx-lpi2c: Switch to SPDX identifier i2c: mxs: Switch to SPDX identifier i2c: busses: make use of i2c_8bit_addr_from_msg i2c: algos: make use of i2c_8bit_addr_from_msg i2c: rcar: document R8A77980 bindings i2c: qup: Add command-line parameter to override SCL frequency i2c: qup: Correct duty cycle for FM and FM+ i2c: qup: Add support for Fast Mode Plus i2c: qup: add probe path for Centriq ACPI devices i2c: robotfuzz-osif: drop pointless test i2c: robotfuzz-osif: remove pointless local variable i2c: rk3x: Don't print visible virtual mapping MMIO address i2c: opal: don't check number of messages in the driver i2c: ibm_iic: don't check number of messages in the driver i2c: imx: Switch to SPDX identifier i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data i2c: mux: demux-pinctrl: use proper parent device for demux adapter i2c: mux: improve error message for failed symlink ...
2018-05-26ARM: Fix i2c-gpio GPIO descriptor tablesLinus Walleij
I used bad names in my clumsiness when rewriting many board files to use GPIO descriptors instead of platform data. A few had the platform_device ID set to -1 which would indeed give the device name "i2c-gpio". But several had it set to >=0 which gives the names "i2c-gpio.0", "i2c-gpio.1" ... Fix the offending instances in the ARM tree. Sorry for the mess. Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors") Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Simon Guinot <simon.guinot@sequanux.org> Reported-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-17i2c: gpio: move header to platform_dataWolfram Sang
This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: James Hogan <jhogan@kernel.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2018-04-06ARM: sa1100/simpad: switch simpad CF to use gpiod APIsRussell King
Switch simpad's CF implementation to use the gpiod APIs. The inverted detection is handled using gpiolib's native inversion abilities. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-04-06ARM: sa1100/shannon: convert to generic CF socketsRussell King
Convert shannon to use the generic CF socket support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-04-06ARM: sa1100/nanoengine: convert to generic CF socketsRussell King
Convert nanoengine to use the generic CF socket support. Makefile fix from Arnd Bergmann <arnd@arndb.de>. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24ARM: sa1100/h3xxx: switch h3xxx PCMCIA to use gpiod APIsRussell King
Switch h3xxx's PCMCIA implementation to use the gpiod APIs where possible. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24ARM: sa1100/cerf: convert to generic CF socketsRussell King
Convert Cerf to use the generic CF socket support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24ARM: sa1100/assabet: convert to generic CF socketsRussell King
Convert Assabet to use the generic CF socket support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24ARM: sa1100: provide infrastructure to support generic CF socketsRussell King
Provide the SoC-level infrastructure to support the generic CF sockets. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-01ARM: sa1100/neponset: add GPIO drivers for control and modem registersRussell King
The NCR, MDM_CTL* and AUD registers manipulate the state of external signals (eg, the RTS, DTR signals and the ethernet oscillator enable signal) or indicate the state of external signals (eg, CTS, DSR). Where these registers can be written, the current value can be read back, which relieves us from having to maintain a software copy of the current state. Model these registers as fixed-direction GPIO registers. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-01ARM: sa1100/assabet: add BCR/BSR GPIO driverRussell King
Add a GPIO driver for the board control register/board status register for the sa1100/assabet platform. This allows us to transition a range of drivers to use the gpiod APIs rather than the platform private ASSABET_BCR_* interfaces. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-14Merge branch 'i2c/for-4.15' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "This contains two bigger than usual tree-wide changes this time. They all have proper acks, caused no merge conflicts in linux-next where they have been for a while. They are namely: - to-gpiod conversion of the i2c-gpio driver and its users (touching arch/* and drivers/mfd/*) - adding a sbs-manager based on I2C core updates to SMBus alerts (touching drivers/power/*) Other notable changes: - i2c_boardinfo can now carry a dev_name to be used when the device is created. This is because some devices in ACPI world need fixed names to find the regulators. - the designware driver got a long discussed overhaul of its PM handling. img-scb and davinci got PM support, too. - at24 driver has way better OF support. And it has a new maintainer. Thanks Bartosz for stepping up! The rest is regular driver updates and fixes" * 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits) ARM: sa1100: simpad: Correct I2C GPIO offsets i2c: aspeed: Deassert reset in probe eeprom: at24: Add OF device ID table MAINTAINERS: new maintainer for AT24 driver i2c: nuc900: remove platform_data, too i2c: thunderx: Remove duplicate NULL check i2c: taos-evm: Remove duplicate NULL check i2c: Make i2c_unregister_device() NULL-aware i2c: xgene-slimpro: Support v2 i2c: mpc: remove useless variable initialization i2c: omap: Trigger bus recovery in lockup case i2c: gpio: Add support for named gpios in DT dt-bindings: i2c: i2c-gpio: Add support for named gpios i2c: gpio: Local vars in probe i2c: gpio: Augment all boardfiles to use open drain i2c: gpio: Enforce open drain through gpiolib gpio: Make it possible for consumers to enforce open drain i2c: gpio: Convert to use descriptors power: supply: sbs-message: fix some code style issues power: supply: sbs-battery: remove unchecked return var ...
2017-11-10ARM: sa1100: simpad: Correct I2C GPIO offsetsLinus Walleij
Arnd reported the following build bug bug: In file included from arch/arm/mach-sa1100/simpad.c:20:0: arch/arm/mach-sa1100/include/mach/SA-1100.h:1118:18: error: large integer implicitly truncated to unsigned type [-Werror=overflow] (0x00000001 << (Nb)) ^ include/linux/gpio/machine.h:56:16: note: in definition of macro 'GPIO_LOOKUP_IDX' .chip_hwnum = _chip_hwnum, ^~~~~~~~~~~ arch/arm/mach-sa1100/include/mach/SA-1100.h:1140:21: note: in expansion of macro 'GPIO_GPIO' ^~~~~~~~~ arch/arm/mach-sa1100/simpad.c:331:27: note: in expansion of macro 'GPIO_GPIO21' GPIO_LOOKUP_IDX("gpio", GPIO_GPIO21, NULL, 0, This is what happened: commit b2e63555592f81331c8da3afaa607d8cf83e8138 "i2c: gpio: Convert to use descriptors" commit 4d0ce62c0a02e41a65cfdcfe277f5be430edc371 "i2c: gpio: Augment all boardfiles to use open drain" together uncovered an old bug in the Simpad board file: as theGPIO_LOOKUP_IDX() encodes GPIO offsets on gpiochips in an u16 (see <linux/gpio/machine.h>) these GPIO "numbers" does not fit, since in arch/arm/mach-sa1100/include/mach/SA-1100.h it is defined as: #define GPIO_GPIO(Nb) (0x00000001 << (Nb)) (...) #define GPIO_GPIO21 GPIO_GPIO(21) /* GPIO [21] */ This is however provably wrong, since the i2c-gpio driver uses proper GPIO numbers, albeit earlier from the global number space, whereas this GPIO_GPIO21 is the local line offset in the GPIO register, which is used in other code but certainly not in the gpiolib GPIO driver in drivers/gpio/gpio-sa1100.c, which has code like this: static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { int reg = value ? R_GPSR : R_GPCR; writel_relaxed(BIT(offset), sa1100_gpio_chip(chip)->membase + reg); } So far everything however compiled fine as an unsigned int was used to pass the GPIO numbers in struct i2c_gpio_platform_data. We can trace the actual error back to commit dbd406f9d0a1d33a1303eb75cbe3f9435513d339 "ARM: 7025/1: simpad: add GPIO based device definitions." This added the i2c_gpio with the wrong offsets. This commit was before the SA1100 was converted to use the gpiolib, but as can be seen from the contemporary gpio.c in mach-sa1100, it was already using: static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset) { return GPLR & GPIO_GPIO(offset); } And GPIO_GPIO() is essentially the BIT() macro. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30i2c: gpio: Augment all boardfiles to use open drainLinus Walleij
We now handle the open drain mode internally in the I2C GPIO driver, but we will get warnings from the gpiolib that we override the default mode of the line so it becomes open drain. We can fix all in-kernel users by simply passing the right flag along in the descriptor table, and we already touched all of these files in the series so let's just tidy it up. Cc: Steven Miao <realmz6@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Wu, Aaron <Aaron.Wu@analog.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-30i2c: gpio: Convert to use descriptorsLinus Walleij
This converts the GPIO-based I2C-driver to using GPIO descriptors instead of the old global numberspace-based GPIO interface. We: - Convert the driver to unconditionally grab two GPIOs from the device by index 0 (SDA) and 1 (SCL) which will work fine with device tree and descriptor tables. The existing device trees will continue to work just like before, but without any roundtrip through the global numberspace. - Brutally convert all boardfiles still passing global GPIOs by registering descriptor tables associated with the devices instead so this driver does not need to keep supporting passing any GPIO numbers as platform data. There is no stepwise approach as elegant as this, I strongly prefer this big hammer over any antsteps for this conversion. This way the old GPIO numbers go away and NEVER COME BACK. Special conversion for the different boards utilizing I2C-GPIO: - EP93xx (arch/arm/mach-ep93xx): pretty straight forward as all boards were using the same two GPIO lines, just define these two in a lookup table for "i2c-gpio" and register these along with the device. None of them define any other platform data so just pass NULL as platform data. This platform selects GPIOLIB so all should be smooth. The pins appear on a gpiochip for bank "G" as pins 1 (SDA) and 0 (SCL). - IXP4 (arch/arm/mach-ixp4): descriptor tables have to be registered for each board separately. They all use "IXP4XX_GPIO_CHIP" so it is pretty straight forward. Most board define no other platform data than SCL/SDA so they can drop the #include of <linux/i2c-gpio.h> and assign NULL to platform data. The "goramo_mlr" (Goramo Multilink Router) board is a bit worrisome: it implements its own I2C bit-banging in the board file, and optionally registers an I2C serial port, but claims the same GPIO lines for itself in the board file. This is not going to work: there will be competition for the GPIO lines, so delete the optional extra I2C bus instead, no I2C devices are registered on it anyway, there are just hints that it may contain an EEPROM that may be accessed from userspace. This needs to be fixed up properly by the serial clock using I2C emulation so drop a note in the code. - KS8695 board acs5k (arch/arm/mach-ks8695/board-acs5.c) has some platform data in addition to the pins so it needs to be kept around sans GPIO lines. Its GPIO chip is named "KS8695" and the arch selects GPIOLIB. - PXA boards (arch/arm/mach-pxa/*) use some of the platform data so it needs to be preserved here. The viper board even registers two GPIO I2Cs. The gpiochip is named "gpio-pxa" and the arch selects GPIOLIB. - SA1100 Simpad (arch/arm/mach-sa1100/simpad.c) defines a GPIO I2C bus, and the arch selects GPIOLIB. - Blackfin boards (arch/blackfin/bf533 etc) for these I assume their I2C GPIOs refer to the local gpiochip defined in arch/blackfin/kernel/bfin_gpio.c names "BFIN-GPIO". The arch selects GPIOLIB. The boards get spiked with IF_ENABLED(I2C_GPIO) but that is a side effect of it being like that already (I would just have Kconfig select I2C_GPIO and get rid of them all.) I also delete any platform data set to 0 as it will get that value anyway from static declartions of platform data. - The MIPS selects GPIOLIB and the Alchemy machine is using two local GPIO chips, one of them has a GPIO I2C. We need to adjust the local offset from the global number space here. The ATH79 has a proper GPIO driver in drivers/gpio/gpio-ath79.c and AFAICT the chip is named "ath79-gpio" and the PB44 PCF857x expander spawns from this on GPIO 1 and 0. The latter board only use the platform data to specify pins so it can be cut altogether after this. - The MFD Silicon Motion SM501 is a special case. It dynamically spawns an I2C bus off the MFD using sm501_create_subdev(). We use an approach to dynamically create a machine descriptor table and attach this to the "SM501-LOW" or "SM501-HIGH" gpiochip. We use chip-local offsets to grab the right lines. We can get rid of two local static inline helpers as part of this refactoring. Cc: Steven Miao <realmz6@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Heiko Schocher <hs@denx.de> Acked-by: Wu, Aaron <Aaron.Wu@analog.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-27ARM: sa1100: normalize clk APIArnd Bergmann
sa1100 provides its own variant of the clk API rather than using the generic COMMON_CLK API. This generally works, but it causes some link errors with drivers using the clk_set_rate, clk_get_parent, clk_set_parent or clk_round_rate functions when a platform lacks those interfaces. This adds trivial stub implementations for each of them, based on the behavior of the COMMON_CLK implementation: - set_rate() and set_parent() report success without doing anything - round_rate() returns the clk rate - get_parent() returns NULL. This adds the minimal bloat and should do the right thing for the simple clock hardware in this SoC. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27ARM: sa1100/pxa: fix MTD_XIP buildArnd Bergmann
In commit 3169663ac5902 "ARM: sa11x0/pxa: convert OS timer registers to IOMEM", the definition of the OSCR macro was changed to be an __iomem pointer, but the same register is also used by the XIP code. This patch does the corresponding change here as well. On PXA, the IRQ register definitions were removed even earlier, in commit 5d284e353eb1 ("ARM: pxa: avoid accessing interrupt registers directly"). This patch unfortunately brings some of that back. An earlier version of my patch moved the code into an external function, which could not work for CONFIG_XIP_KERNEL+CONFIG_MTD_XIP, so this restores something close to the original code. Link: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-March/241716.html Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-12ARM: HP Jornada 7XX: move inline before return typeJoe Perches
Convert 'u8 inline' to 'inline u8' to be the same style used by the rest of the kernel. Miscellanea: jornada_ssp_reverse is an odd function. It is declared inline but is also EXPORT_SYMBOL. It is also apparently only used by jornada720_ssp.c Likely the EXPORT_SYMBOL could be removed and the function converted to static. The addition of static and removal of EXPORT_SYMBOL was not done. Link: http://lkml.kernel.org/r/5bd3b2bf39c6c9caf773949f18158f8f5ec08582.1499284835.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-28ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbolFlorian Fainelli
All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-12-15Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - an update for clkdev registration error detection to simplify users - add cpu capacity parsing from DT - support for larger cachelines found on UniPhier caches - documentation for udelay constants - properly tag assembly function declarations - remove unnecessary indirection of asm/mach-types.h - switch to syscall table based generation to simplify future additions of system calls, along with correpsonding commit for pkey syscalls - remove redundant sa1101 header file - RONX protect modules when they're in the vmalloc region * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: mm: allow set_memory_*() to be used on the vmalloc region ARM: mm: fix set_memory_*() bounds checks ARM: 8631/1: clkdev: Detect errors in clk_hw_register_clkdev() for mass registration ARM: 8629/1: vfp: properly tag assembly function declarations in C code ARM: 8622/3: add sysfs cpu_capacity attribute ARM: 8621/3: parse cpu capacity-dmips-mhz from DT ARM: 8623/1: mm: add ARM_L1_CACHE_SHIFT_7 for UniPhier outer cache ARM: Update mach-types ARM: sa1100: remove SA-1101 header file ARM: 8619/1: udelay: document the various constants ARM: wire up new pkey syscalls ARM: convert to generated system call tables ARM: remove indirection of asm/mach-types.h
2016-10-19ARM: sa1100: remove SA-1101 header fileRussell King
Remove the completely unused SA-1101 header file. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-10-18ARM: sa11x0/pxa: get rid of get_clock_tick_rateRobert Jarzmik
The last user of this function is gone, so remove it. The clock API should now be used to get clock rates. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-10-18ARM: sa11x0/pxa: acquire timer rate from the clock rateRobert Jarzmik
As both pxa and sa1100 provide a clock to the timer, the rate can be inferred from the clock rather than hard encoded in a functional call. This patch changes the pxa timer to have a mandatory clock which is used as the timer rate. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-10-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "You will get - a new driver for Elan eKTF2127 touchscreen controllers - a new "gpio-decoder" driver to read and report state of several GPIO lines - an ADC resistor ladder driver - the ft6326 driver is removed because edt-ft5x06 handles the same devices just fine. .. plus the regular slew of driver fixes/enhancements" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits) Input: elan_i2c - fix return tests of i2c_smbus_read_block_data() Input: ektf2127 - mark PM functions as __maybe_unused Input: snvs_pwrkey - drop input_free_device call if input_register_device fails Input: add support for Elan eKTF2127 touchscreen controller Input: serio - add hangup support Input: tps65218-pwrbutton - add support for tps65217 variant Input: jornada720_ts - get rid of mach/irqs.h and mach/hardware.h includes Input: jornada720_kbd - remove unneeded mach/hardware.h include Input: focaltech - mark focaltech_set_resolution() static Input: wdt87xx_i2c - fix the flash erase issue Input: gpio-keys-polled - don't use unit-address with button nodes Input: add generic input driver to read encoded GPIO lines Input: add ADC resistor ladder driver Input: pegasus_notetaker - directly include workqueue header Input: elants_i2c - get product id on recovery mode for FW update Input: wm97xx - remove deprecated create_singletheread_workqueue Input: mc13783_ts - remove deprecated create_singletheread_workqueue Input: psmouse - remove deprecated create_singletheread_workqueue Input: jornada720_kbd - switch to using dev_dbg Input: jornada720_kbd - get rid of mach/irqs.h include ...
2016-10-06Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - Correct ARMs dma-mapping to use the correct printk format strings. - Avoid defining OBJCOPYFLAGS globally which upsets lkdtm rodata testing. - Cleanups to ARMs asm/memory.h include. - L2 cache cleanups. - Allow flat nommu binaries to be executed on ARM MMU systems. - Kernel hardening - add more read-only after init annotations, including making some kernel vdso variables const. - Ensure AMBA primecell clocks are appropriately defaulted. - ARM breakpoint cleanup. - Various StrongARM 11x0 and companion chip (SA1111) updates to bring this legacy platform to use more modern APIs for (eg) GPIOs and interrupts, which will allow us in the future to reduce some of the board-level driver clutter and elimate function callbacks into board code via platform data. There still appears to be interest in these platforms! - Remove the now redundant secure_flush_area() API. - Module PLT relocation optimisations. Ard says: This series of 4 patches optimizes the ARM PLT generation code that is invoked at module load time, to get rid of the O(n^2) algorithm that results in pathological load times of 10 seconds or more for large modules on certain STB platforms. - ARMv7M cache maintanence support. - L2 cache PMU support * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (35 commits) ARM: sa1111: provide to_sa1111_device() macro ARM: sa1111: add sa1111_get_irq() ARM: sa1111: clean up duplication in IRQ chip implementation ARM: sa1111: implement a gpio_chip for SA1111 GPIOs ARM: sa1111: move irq cleanup to separate function ARM: sa1111: use devm_clk_get() ARM: sa1111: use devm_kzalloc() ARM: sa1111: ensure we only touch RAB bus type devices when removing ARM: 8611/1: l2x0: add PMU support ARM: 8610/1: V7M: Add dsb before jumping in handler mode ARM: 8609/1: V7M: Add support for the Cortex-M7 processor ARM: 8608/1: V7M: Indirect proc_info construction for V7M CPUs ARM: 8607/1: V7M: Wire up caches for V7M processors with cache support. ARM: 8606/1: V7M: introduce cache operations ARM: 8605/1: V7M: fix notrace variant of save_and_disable_irqs ARM: 8604/1: V7M: Add support for reading the CTR with read_cpuid_cachetype() ARM: 8603/1: V7M: Add addresses for mem-mapped V7M cache operations ARM: 8602/1: factor out CSSELR/CCSIDR operations that use cp15 directly ARM: kernel: avoid brute force search on PLT generation ARM: kernel: sort relocation sections before allocating PLTs ...
2016-10-06Merge branches 'misc' and 'sa1111-base' into for-linusRussell King
2016-10-05Merge tag 'gpio-v4.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.9 series: Subsystem improvements: - do away with the last users of the obsolete Kconfig options ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter always sounded like an item on a wishlist to Santa Claus to me). We can now select GPIOLIB and be done with it, for all archs. After some struggle it even work on UM. Not that it has GPIO, but if it wants to, it can select the library. - continued efforts to make drivers properly either tristate or bool. - introduce a warning for drivers assigning default triggers to their irqchip lines when probed from device tree, so we find and fix these ambigous drivers. It is agreed that in the OF config path, the device tree defines trigger characteristics. - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips. - we introduce the ability to mark certain IRQ lines as "unusable" as they can be taken by BIOS/firmware, unrouted in silicon and generally nasty if you use them, and such things. This is put to good use in the STMPE driver and also in the Cherryview pin control driver. - a new "mockup" virtual GPIO device that can be used for testing. The plan is to add unit tests under tools/* for exercising this device and verify that the kernel code paths are working as they should. - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was implicit all the time, but when people started building UM with allyesconfig or allmodconfig it exploded in their face. - move some stray bits of device tree and ACPI HW description callbacks down into their respective implementation silo. These were causing issues when compiling on !HAS_IOMEM as well, so now eventually UM compiles the GPIOLIB library if it wants to. New drivers: - new driver for the Aspeed GPIO front-end companion to the pin controller merged through the pin control tree. - new driver for the LP873x PMIC GPIO portions. - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900, TS-7970, TS-7990 and TS-4100. - new driver for the Broadcom BCM63xx series including BCM6338 and BCM6345. - new driver for the Intel WhiskeyCove PMIC GPIO. - new driver for the Allwinner AXP209 PMIC GPIO portions. - new driver for Diamond Systems 48 line GPIO-MM, another of these port-mapped I/O expansion cards. - support the STMicroelectronics STMPE1600 variant in the STMPE driver. Driver improvements: - the STMPE driver now supports rising/falling edge detection properly for IRQs. - the PCA954x will now fetch and enable its VCC regulator properly. - major rework of the PCA953x driver with the goal of eventually switching it over to use regmap and thus modernize it even more. - switch the IOP driver to use the generic MMIO GPIO library. - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver over to this subsystem from MFD, achieveing some separation of concerns" * tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits) gpio: add missing static inline gpio: OF: localize some gpiochip init functions gpio: acpi: separation of concerns gpio: OF: separation of concerns gpio: make memory-mapped drivers depend on HAS_IOMEM gpio: stmpe: use BIT() macro gpio: stmpe: forbid unused lines to be mapped as IRQs mfd/gpio: Move HTC GPIO driver to GPIO subsystem gpio: MAINTAINERS: Add an entry for GPIO mockup driver gpio/mockup: add virtual gpio device gpio: Added zynq specific check for special pins on bank zero gpio: axp209: Implement get_direction gpio: aspeed: remove redundant return value check gpio: loongson1: remove redundant return value check ARM: omap2: fix missing include gpio: tc3589x: fix up complaints on unsigned gpio: tc3589x: add .get_direction() and small cleanup gpio: f7188x: use gpiochip_get_data instead of container_of gpio: tps65218: use devm_gpiochip_add_data() for gpio registration gpio: aspeed: fix return value check in aspeed_gpio_probe() ...
2016-09-28mfd/gpio: Move HTC GPIO driver to GPIO subsystemLinus Walleij
The HTC GPIO driver is a pure GPIO driver and I just can not see what it is doing inside MFD. Let's just move it to GPIO and take this opportunity to move the platform data to <linux/platform_data/gpio-htc-egpio.h> Cc: arm@kernel.org Cc: Russell King <linux@armlinux.org.uk> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-10Input: jornada720_ts - get rid of mach/irqs.h and mach/hardware.h includesRussell King
Switch the jornada720 touchscreen driver to obtain its gpio from the platform device via gpiolib and derive the interrupt from the GPIO, rather than via a hard-coded interrupt number obtained from the mach/irqs.h and mach/hardware.h headers. Tested-by: Adam Wysocki <armlinux@chmurka.net> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-09Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A few ARM fixes: - Robin Murphy noticed that the non-secure privileged entry was relying on undefined behaviour, which needed to be fixed. - Vladimir Murzin noticed that prov-v7 fails to build for MMUless configurations because a required header file wasn't included. - A bunch of fixes for StrongARM regressions found while testing 4.8-rc on such platforms" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: sa1100: clear reset status prior to reboot ARM: 8600/1: Enforce some NS-SVC initialisation ARM: 8599/1: mm: pull asm/memory.h explicitly ARM: sa1100: register clocks early ARM: sa1100: fix 3.6864MHz clock
2016-08-28net: smc91x: fix SMC accessesRussell King
Commit b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26ARM: document and update UNCACHEABLE_ADDR definitionsRussell King
Document the UNCACHEABLE_ADDR definitions for footbridge and SA1100 so that we know where they're located and/or what they're accessing. Change RiscPC to calculate the UNCACHEABLE_ADDR value from FLUSH_BASE as that's where we locate that. UNCACHEABLE_ADDR is used to perform an uncached access (ARMv4 terminology) necessary to force a CPU clock-switch to the memory- speed clock, as required for entering WFI. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-08-26ARM: sa1100: clear reset status prior to rebootRussell King
Clear the current reset status prior to rebooting the platform. This adds the bit missing from 04fef228fb00 ("[ARM] pxa: introduce reset_status and clear_reset_status for driver's usage"). Fixes: 04fef228fb00 ("[ARM] pxa: introduce reset_status and clear_reset_status for driver's usage") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-08-23ARM: sa1100: move StrongARM CPU ID checks to cputype.hRussell King
Move the StrongARM CPU ID checks out of the platform's hardware.h file into asm/cputype.h Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-08-23ARM: sa1100: register clocks earlyRussell King
Since we switched to use pxa_timer, we need to provide the OSTIMER0 clock. However, as the clock is initialised early, we need to provide the clock early as well, so that pxa_timer can find it. Adding the clock to the clkdev table at core_initcall() time is way too late. Move the initialisation earlier. Fixes: ee3a4020f7c9 ("ARM: 8250/1: sa1100: provide OSTIMER0 clock for pxa_timer") Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-08-23ARM: sa1100: fix 3.6864MHz clockRussell King
pxa_timer wants to be able to call clk_enable() etc on this clock, but our clk_enable() implementation expects non-NULL enable/disable operations. Provide these dummy implementations. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0204000 [00000000] *pgd=00000000 Internal error: Oops: 80000005 [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.8.0-rc2+ #887 Hardware name: Intel-Assabet task: c0644590 task.stack: c0640000 PC is at 0x0 LR is at clk_enable+0x40/0x58 pc : [<00000000>] lr : [<c021b178>] psr: 600000d3 sp : c0641f60 ip : c0641f4c fp : c0641f74 r10: c1ffc7a0 r9 : 6901b118 r8 : 00000001 r7 : c0639a34 r6 : 0000001b r5 : a00000d3 r4 : c0645d70 r3 : c0645d78 r2 : 00000001 r1 : c0641ef0 r0 : c0645d70 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: c020717f Table: c020717f DAC: 00000053 Process swapper (pid: 0, stack limit = 0xc0640188) Stack: (0xc0641f60 to 0xc0642000) 1f60: 00384000 c08762e4 c0641f98 c0641f78 c063308c c021b144 00000000 00000000 1f80: 00000000 c0660b20 ffffffff c0641fa8 c0641f9c c06220ec c0633058 c0641fb8 1fa0: c0641fac c061f114 c06220dc c0641ff4 c0641fbc c061bb68 c061f0fc ffffffff 1fc0: ffffffff 00000000 c061b6cc c0639a34 c0660cd4 c0642038 c0639a30 c0645434 1fe0: c0204000 c06380f8 00000000 c0641ff8 c0208048 c061b954 00000000 00000000 Backtrace: [<c021b138>] (clk_enable) from [<c063308c>] (pxa_timer_nodt_init+0x40/0x120) r5:c08762e4 r4:00384000 [<c063304c>] (pxa_timer_nodt_init) from [<c06220ec>] (sa1100_timer_init+0x1c/0x20) r6:ffffffff r5:c0660b20 r4:00000000 [<c06220d0>] (sa1100_timer_init) from [<c061f114>] (time_init+0x24/0x2c) [<c061f0f0>] (time_init) from [<c061bb68>] (start_kernel+0x220/0x42c) [<c061b948>] (start_kernel) from [<c0208048>] (0xc0208048) r10:c06380f8 r8:c0204000 r7:c0645434 r6:c0639a30 r5:c0642038 r4:c0660cd4 Code: bad PC value ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill the idle task! Fixes: ee3a4020f7c9 ("ARM: 8250/1: sa1100: provide OSTIMER0 clock for pxa_timer") Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-08-22Input: jornada720_kbd - get rid of mach/irqs.h includeRussell King
Switch the jornada720 keyboard driver to obtain its interrupt from the platform device, rather than via a hard-coded interrupt number obtained from the mach/irqs.h header. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-12ARM: sa1100: remove references to the defunct handhelds.orgLinus Walleij
The website handhelds.org has been down for a long time and is likely never coming back online. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-03-19Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Another mixture of changes this time around: - Split XIP linker file from main linker file to make it more maintainable, and various XIP fixes, and clean up a resulting macro. - Decompressor cleanups from Masahiro Yamada - Avoid printing an error for a missing L2 cache - Remove some duplicated symbols in System.map, and move vectors/stubs back into kernel VMA - Various low priority fixes from Arnd - Updates to allow bus match functions to return negative errno values, touching some drivers and the driver core. Greg has acked these changes. - Virtualisation platform udpates form Jean-Philippe Brucker. - Security enhancements from Kees Cook - Rework some Kconfig dependencies and move PSCI idle management code out of arch/arm into drivers/firmware/psci.c - ARM DMA mapping updates, touching media, acked by Mauro. - Fix places in ARM code which should be using virt_to_idmap() so that Keystone2 can work. - Fix Marvell Tauros2 to work again with non-DT boots. - Provide a delay timer for ARM Orion platforms" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits) ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0 ARM: 8547/1: dma-mapping: store buffer information ARM: 8543/1: decompressor: rename suffix_y to compress-y ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile ARM: 8541/1: decompressor: drop redundant FORCE in Makefile ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files ARM: 8539/1: decompressor: drop more unneeded assignments to "targets" ARM: 8538/1: decompressor: drop unneeded assignments to "targets" ARM: 8532/1: uncompress: mark putc as inline ARM: 8531/1: turn init_new_context into an inline function ARM: 8530/1: remove VIRT_TO_BUS ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs ARM: make the physical-relative calculation more obvious ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL ARM: 8411/1: Add default SPARSEMEM settings ARM: 8503/1: clk_register_clkdev: remove format string interface ARM: 8529/1: remove 'i' and 'zi' targets ...
2016-02-22ARM: 8532/1: uncompress: mark putc as inlineArnd Bergmann
When CONFIG_DEBUG_ICEDCC is set, we don't use the platform specific putc() function, but use icedcc_putc() instead, so putc is unused and causes a compile time warning: In file included from ../arch/arm/boot/compressed/misc.c:28:0: arch/arm/mach-rpc/include/mach/uncompress.h:79:13: warning: 'putc' defined but not used [-Wunused-function] arch/arm/mach-w90x900/include/mach/uncompress.h:30:13: warning: 'putc' defined but not used [-Wunused-function] On most platforms, this does not happen, because putc is defined as 'static inline' so the compiler will automatically drop it when it's unused. This changes the remaining seven platforms to behave the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-19ARM: simpad: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-22ARM: sa1100/simpad: Be sure to clamp return valueLinus Walleij
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: arm@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-05ARM: sa1100: remove unused RTC register definitionsRob Herring
Now that register definitions have been moved to the driver, we can remove them from machine specific code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-07-28ARM: kill off set_irq_flags usageRob Herring
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Imre Kaloz <kaloz@openwrt.org> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-06-26Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Bigger items included in this update are: - A series of updates from Arnd for ARM randconfig build failures - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to drivers/irqchip/ - Move ARMs SP804 timer to drivers/clocksource/ - Perf updates from Mark Rutland in preparation to move the ARM perf code into drivers/ so it can be shared with ARM64. - MCPM updates from Nicolas - Add support for taking platform serial number from DT - Re-implement Keystone2 physical address space switch to conform to architecture requirements - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2 changes. - L2C cleanups to avoid unlocking caches if we're prevented by the secure support to unlock. - Avoid cleaning a potentially dirty cache containing stale data on CPU initialisation - Add ARM-only entry point for secondary startup (for machines that can only call into a Thumb kernel in ARM mode). Same thing is also done for the resume entry point. - Provide arch_irqs_disabled via asm-generic - Enlarge ARMv7M vector table - Always use BFD linker for VDSO, as gold doesn't accept some of the options we need. - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all BSYM compiler macros to a "badr" (for branch address). - Shut up compiler warnings provoked by our cmpxchg() implementation. - Ensure bad xchg sizes fail to link" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits) ARM: Fix build if CLKDEV_LOOKUP is not configured ARM: fix new BSYM() usage introduced via for-arm-soc branch ARM: 8383/1: nommu: avoid deprecated source register on mov ARM: 8391/1: l2c: add options to overwrite prefetching behavior ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone ARM: 8384/1: VDSO: force use of BFD linker ARM: 8385/1: VDSO: group link options ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations ARM: remove __bad_xchg definition ARM: 8369/1: ARMv7M: define size of vector table for Vybrid ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion ARM: 8364/1: fix BE32 module loading ARM: 8360/1: add secondary_startup_arm prototype in header file ARM: 8359/1: correct secondary_startup_arm mode ARM: proc-v7: sanitise and document registers around errata ARM: proc-v7: clean up MIDR access ...
2015-06-18ARM: sa1100: convert SA11x0 related code to use new chained handler helperRussell King
Convert SA11x0 (Neponset, SA1111, and UCB1x00 code) to use the new irq_set_chained_handler_and_data() helper. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/E1Z4yzx-0002S6-7p@rmk-PC.arm.linux.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-28ARM: 8368/1: sa1100: move irq driver to drivers/irqchip/Dmitry Eremin-Solenikov
Move current sa11x0 IRQ driver to the irqchip subsystem. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>