summaryrefslogtreecommitdiff
path: root/arch/arm/mach-prima2/pm.c
AgeCommit message (Collapse)Author
2014-05-22ARM: l2c: remove unnecessary call to outer_flush_all()Russell King
outer_disable() is defined to safely turn the L2 cache off without data loss: this means that outer_flush_all() should never be called unless you need to implement some special L2 cache disabling, and even then only from your replacement L2 cache disable function. Acked-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-14ARM: prima2: pm: drop redundant postcore_initcallBarry Song
This will delete some redundant calling of sirfsoc_of_pwrc_init() and sirfsoc_memc_init() for non-CSR platforms if we use multi-platform. Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-14ARM: prima2: pm: enable rtc alarm0 and alarm1 as wakeup sourceXianglong Du
This patch also enables RTC alarm as wakeup source after system suspends. Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-02Merge tag 'fixes-non-critical-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-cricitical bug fixes from Arnd Bergmann: "These are various bug fixes that were not considered important enough for merging into 3.10. The majority of the ARM fixes are for the OMAP and at91 platforms, and there is another set of bug fixes for device drivers that resolve 'randconfig' build errors and that the subsystem maintainers either did not pick up or preferred to get merged through the arm-soc tree." * tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: at91/PMC: use at91_usb_rate() for UTMI PLL ARM: at91/PMC: fix at91sam9n12 USB FS init ARM: at91/PMC: at91sam9n12 family has a PLLB ARM: at91/PMC: sama5d3 family doesn't have a PLLB ARM: tegra: fix section mismatch in tegra_pmc_parse_dt ARM: mxs: don't select HAVE_PWM ARM: mxs: stub out mxs_pm_init for !CONFIG_PM cpuidle: calxeda: select ARM_CPU_SUSPEND ARM: mvebu: fix length of ethernet registers in mv78260 dtsi ARM: at91: cpuidle: Fix target_residency ARM: at91: fix at91_extern_irq usage for non-dt boards ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change X.509: do not emit any informational output mtd: omap2: allow bulding as a module [SCSI] nsp32: use mdelay instead of large udelay constants hwrng: bcm2835: fix MODULE_LICENSE tag ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED ARM: at91: Fix link breakage when !CONFIG_PHYLIB MAINTAINERS: Add exynos filename match to ARM/S5P EXYNOS ARM ARCHITECTURES ...
2013-06-11ARM: prima2: fix incorrect panic usageHaojian Zhuang
In prima2, some functions of checking DT is registered in initcall level. If it doesn't match the compatible name of sirf, kernel will panic. It blocks the usage of multiplatform on other verndor. The error message is in below. Knic - not syncing: unable to find compatible pwrc node in dtb CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc3-00006-gd7f26ea-dirty #86 [<c0013adc>] (unwind_backtrace+0x0/0xf8) from [<c0011430>] (show_stack+0x10/0x1) [<c0011430>] (show_stack+0x10/0x14) from [<c026f724>] (panic+0x90/0x1e8) [<c026f724>] (panic+0x90/0x1e8) from [<c03267fc>] (sirfsoc_of_pwrc_init+0x24/0x) [<c03267fc>] (sirfsoc_of_pwrc_init+0x24/0x58) from [<c0320864>] (do_one_initcal) [<c0320864>] (do_one_initcall+0x90/0x150) from [<c0320a20>] (kernel_init_freeab) [<c0320a20>] (kernel_init_freeable+0xfc/0x1c4) from [<c026b9e8>] (kernel_init+0) [<c026b9e8>] (kernel_init+0x8/0xe4) from [<c000e158>] (ret_from_fork+0x14/0x3c) Signen-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-03ARM: prima2: Replace include linux/module.h with linux/export.hSyam Sidhardhan
include <linux/export.h> is the right to go here. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2013-01-03ARM: drivers: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-08ARM: prima2: use machine specific hook for late initShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Barry Song <baohua.song@csr.com>
2011-12-02ARM: CSR: PM: fix build error due to undeclared 'THIS_MODULE'Barry Song
In the new kernel, we will get the following compile error: arch/arm/mach-prima2/pm.c:141: error: 'THIS_MODULE' undeclared here (not in a function) so include module.h head file explicitly Signed-off-by: Barry Song <baohua.song@csr.com>
2011-10-24ARM: CSR: PM: use outer_resume to resume L2 cacheBarry Song
now we move l2x0 resume to Linux from bootloader since l2x0 already has resume support in core. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2011-09-21ARM: CSR: PM: add sleep entry for SiRFprimaIIRongjun Ying
This patch adds suspend-to-mem support for prima2. It will make prima2 enter DEEPSLEEP mode while accepting PM_SUSPEND_MEM command. Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <baohua.song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de>