| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"Almost all SoC code changes this time are for the TI OMAP platform,
which continues its decade-long quest to move from describing a
complex SoC in code to device tree.
Aside from this, the Uniphier platform has a new maintainer and some
platforms have minor bugfixes and cleanups that were not urgent enough
for v5.12"
* tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
MAINTAINERS: Update ARM/UniPhier SoCs maintainers and status
mailmap: Update email address for Nicolas Saenz
MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail
ARM: exynos: correct kernel doc in platsmp
ARM: hisi: use the correct HiSilicon copyright
ARM: ux500: make ux500_cpu_die static
ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950
ARM: OMAP1: fix incorrect kernel-doc comment syntax in file
ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file
ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock
ARM: at91: pm: Move prototypes to mutually included header
ARM: OMAP2+: use true and false for bool variable
ARM: OMAP2+: add missing call to of_node_put()
ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
ARM: imx: Kconfig: Fix typo in help
ARM: mach-imx: Fix a spelling in the file pm-imx5.c
bus: ti-sysc: Warn about old dtb for dra7 and omap4/5
ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5
ARM: OMAP2+: Drop legacy platform data for omap5 hwmod
ARM: OMAP2+: Drop legacy platform data for omap5 l3
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
SoC changes for omaps for v5.13
Minor non-urgent fixes for issues found by robots and few typo fixes:
- Use DEFINE_DEBUGFS_ATTRIBUTE
- Add missing of_node_put()
- Use true and false for bool variable
- Use DEFINE_SPINLOCK
- Fix incorrect kerneldoc usage
* tag 'omap-for-v5.13/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: fix incorrect kernel-doc comment syntax in file
ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file
ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock
ARM: OMAP2+: use true and false for bool variable
ARM: OMAP2+: add missing call to of_node_put()
ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix uninitialized sr_inst.
Fixes: fbfa463be8dc ("ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for arch/arm/mach-omap2/omap_twl.c follows this syntax, but the
content inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warning from kernel-doc:
"warning: wrong kernel-doc identifier on line:
* OMAP and TWL PMIC specific initializations."
Provide a simple fix by replacing this occurrence with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
fixed the following coccicheck:
./arch/arm/mach-omap2/powerdomain.c:1205:9-10: WARNING: return of 0/1 in
function 'pwrdm_can_ever_lose_context' with return type bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
In one of the error paths of the for_each_child_of_node() loop,
add missing call to of_node_put().
Fix the following coccicheck warning:
./arch/arm/mach-omap2/omap_hwmod.c:2132:1-23: WARNING: Function
"for_each_child_of_node" should have of_node_put() before return around
line 2140.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Fix the following coccicheck warning:
./arch/arm/mach-omap2/pm-debug.c:171:0-23: WARNING: pwrdm_suspend_fops
should be defined with DEFINE_DEBUGFS_ATTRIBUTE.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Fix warning: no previous prototype for 'omap_init_time_of'.
Fixes: e69b4e1a7577 ("ARM: OMAP2+: Add omap_init_time_of()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The sparse tool complains as follows:
arch/arm/mach-omap2/pdata-quirks.c:578:1: warning:
symbol 'pdata_quirks_init_clocks' was not declared. Should it be static?
This symbol is not used outside of pdata-quirks.c, so this
commit marks it static.
Fixes: a15de032a72d ("ARM: OMAP2+: Init both prm and prcm nodes early for clocks")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We need to add a dummy smc call to the cpuidle wakeup path to force the
ROM code to save the return address after MMU is enabled again. This is
needed to prevent random hangs on secure devices like droid4.
Otherwise the system will eventually hang when entering deeper SoC idle
states with the core and mpu domains in open-switch retention (OSWR).
The hang happens as the ROM code tries to use the earlier physical return
address set by omap-headsmp.S with MMU off while waking up CPU1 again.
The hangs started happening in theory already with commit caf8c87d7ff2
("ARM: OMAP2+: Allow core oswr for omap4"), but in practise the issue went
unnoticed as various drivers were often blocking any deeper idle states
with hardware autoidle features.
This patch is based on an earlier TI Linux kernel tree commit 92f0b3028d9e
("OMAP4: PM: update ROM return address for OSWR and OFF") written by
Carlos Leija <cileija@ti.com>, Praneeth Bajjuri <praneeth@ti.com>, and
Bryan Buckley <bryan.buckley@ti.com>. A later version of the patch was
updated to use CPU_PM notifiers by Tero Kristo <t-kristo@ti.com>.
Signed-off-by: Carlos Leija <cileija@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Bryan Buckley <bryan.buckley@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Fixes: caf8c87d7ff2 ("ARM: OMAP2+: Allow core oswr for omap4")
Reported-by: Carl Philipp Klemm <philipp@uvos.xyz>
Reported-by: Merlijn Wajer <merlijn@wizzup.org>
Cc: Ivan Jelincic <parazyd@dyne.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <kristo@kernel.org>
[tony@atomide.com: updated to apply, updated description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We are now registering the mpu domain three times instead of registering
mpu, core and iva domains like we should.
Fixes: d44fa156dcb2 ("ARM: OMAP2+: Configure voltage controller for cpcap")
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
With the recent changes we are now booting am3/4, dra7, and omap4/5
without legacy data using devicetree, simple-pm-bus and genpd. Let's not
initialize and build the legacy data unless CONFIG_OMAP_HWMOD is selected
based on the SoCs enabled in .config.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
'omap-for-v5.13/genpd-omap5' into omap-for-v5.13/genpd-drop-legacy
Merge together branches dropping legacy data to avoid a minor merge conflict.
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Let's drop the legacy data along with the ti,hwmods property and flip
over to using simple-pm-bus instead of simple-bus.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe interconnects with simple-pm-bus and genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.
As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We need to probe both prm and prcm nodes early for clocks
as they are needed by system timers.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"This is mostly 32-bit code for SoC platforms, and looks smaller than
any such branch I remember from previous kernels, as most of this is
now handled in other subsystems for modern platforms:
- Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX,
Renesas, and Samsung
- Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung
- Samsung SoC driver updates to make them loadable modules"
* tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: arm: samsung: include S3C headers in platform entry
MAINTAINERS: Add linux-actions ML for Actions Semi Arch
ARM: s3c: irq-s3c24xx: staticize local functions
ARM: s3c: irq-s3c24xx: include headers for missing declarations
ARM: s3c: fix fiq for clang IAS
ARM: imx: Remove unused IMX_GPIO_NR() macro
soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init
ARM: OMAP2+: fix spellint typo
MAINTAINERS: Update address for OMAP GPMC driver
soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic()
ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
ARM: brcmstb: Add debug UART entry for 72116
ARM: tegra: Don't enable unused PLLs on resume from suspend
soc: samsung: pm_domains: Convert to regular platform driver
soc: samsung: exynos-chipid: correct helpers __init annotation
ARM: mach-imx: imx6ul: Print SOC revision on boot
ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv
soc: samsung: exynos-asv: handle reading revision register error
soc: samsung: exynos-asv: don't defer early on not-supported SoCs
|
|
When I dropped legacy data for omap4 and dra7 smartreflex in favor of
device tree based data, it seems I only testd for the "SmartReflex Class3
initialized" line in dmesg. I missed the fact that there is also
omap_devinit_smartreflex() that happens later, and now it produces an
error on boot for "No Voltage table for the corresponding vdd. Cannot
create debugfs entries for n-values".
This happens as we no longer have the smartreflex instance legacy data,
and have not yet moved completely to device tree based booting for the
driver. Let's fix the issue by changing the smartreflex init to use names.
This should all eventually go away in favor of doing the init in the
driver based on devicetree compatible value.
Note that dra7xx_init_early() is not calling any voltage domain init like
omap54xx_voltagedomains_init(), or a dra7 specific voltagedomains init.
This means that on dra7 smartreflex is still not fully initialized, and
also seems to be missing the related devicetree nodes.
Fixes: a6b1e717e942 ("ARM: OMAP2+: Drop legacy platform data for omap4 smartreflex")
Fixes: e54740b4afe8 ("ARM: OMAP2+: Drop legacy platform data for dra7 smartreflex")
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
