summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
AgeCommit message (Collapse)Author
2015-10-15arm: omap2: timer: get rid of obfuscating macrosFelipe Balbi
those macros just make it a lot more difficult to grep around and actually find similarities. In this patch, we will simply remove them and replace with actual functions and later commits will come to further clean this up. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-15arm: omap2: timer: always define omap4_local_timer_initFelipe Balbi
omap4_local_timer_init() can be used by other platforms as is. At least AM437x wants to use it. Instead of making omap4-only and providing a stub for builds without OMAP4, we can just make sure that function is always available for all SoCs that need it. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Our first real batch of fixes this release cycle. Nothing really concerning, and diffstat is a bit inflated due to some DT contents moving around on STi platforms. There's a collection of them here: - A fixup for a build breakage that hits on arm64 allmodconfig in QCOM SCM firmware drivers - MMC fixes for OMAP that had quite a bit of breakage this merge window. - Misc build/warning fixes on PXA and OMAP - A couple of minor fixes for Beagleboard X15 which is now starting to see a few more users in the wild" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver ARM: dts: fix omap2+ address translation for pbias firmware: qcom: scm: Add function stubs for ARM64 ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies ARM: pxa: balloon3: Fix build error ARM: dts: Fixup model name for HP t410 dts ARM: dts: DRA7: fix a typo in ethernet ARM: omap2plus_defconfig: make PCF857x built-in ARM: dts: Use ti,pbias compatible string for pbias ARM: OMAP5: Cleanup options for SoC only build ARM: DRA7: Select missing options for SoC only build ARM: OMAP2+: board-generic: Remove stale of_irq macros ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410 ARM: dts: am335x-phycore-som: Fix mpu voltage ...
2015-09-16ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_lateDave Gerlach
Add omap2_clk_enable_autoidle_all to am43xx_init_late otherwise the call to omap2_clk_disable_autoidle_all in am43xx_init_early may cause some clocks to always stay active and prevent low power mode transitions. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-14Merge branch 'fixes-rc1' into omap-for-v4.3/fixesTony Lindgren
2015-09-14ARM: OMAP5: Cleanup options for SoC only buildNishanth Menon
OMAP5 SoC has Cortex-A15 which does not use TWD timer. It uses ARCH_TIMER instead, clean up unwanted configuration and enable OMAP_INTERCONNECT and OPP which is necessary for expected functionality on the SoC. Reported-by: Carlos Hernandez <ceh@ti.com> Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: DRA7: Select missing options for SoC only buildNishanth Menon
DRA7 does use OPP, uses OMAP interconnect and also does require SCU. These are missing in the SoC only build of DRA7 breaking various PM features in DRA7 only build. Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: OMAP2+: board-generic: Remove stale of_irq macrosNishanth Menon
When commit c4082d499fa2 ("ARM: omap2+: board-generic: clean up the irq data from board file") cleaned up the direct usage of gic_of_init and omap_intc_of_init, it failed to clean up the macros properly. Since these macros are no longer used, lets just remove them. Fixes: c4082d499fa2 ("ARM: omap2+: board-generic: clean up the irq data from board file") Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as wellNishanth Menon
OMAP5 and DRA7 reuse the same pm44xx_erratum variable so, enable the same, else PM features such as Suspend to ram is broken in a SoC only build configuration. Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-03Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM development updates from Russell King: "Included in this update: - moving PSCI code from ARM64/ARM to drivers/ - removal of some architecture internals from global kernel view - addition of software based "privileged no access" support using the old domains register to turn off the ability for kernel loads/stores to access userspace. Only the proper accessors will be usable. - addition of early fixup support for early console - re-addition (and reimplementation) of OMAP special interconnect barrier - removal of finish_arch_switch() - only expose cpuX/online in sysfs if hotpluggable - a number of code cleanups" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (41 commits) ARM: software-based priviledged-no-access support ARM: entry: provide uaccess assembly macro hooks ARM: entry: get rid of multiple macro definitions ARM: 8421/1: smp: Collapse arch_cpu_idle_dead() into cpu_die() ARM: uaccess: provide uaccess_save_and_enable() and uaccess_restore() ARM: mm: improve do_ldrd_abort macro ARM: entry: ensure that IRQs are enabled when calling syscall_trace_exit() ARM: entry: efficiency cleanups ARM: entry: get rid of asm_trace_hardirqs_on_cond ARM: uaccess: simplify user access assembly ARM: domains: remove DOMAIN_TABLE ARM: domains: keep vectors in separate domain ARM: domains: get rid of manager mode for user domain ARM: domains: move initial domain setting value to asm/domains.h ARM: domains: provide domain_mask() ARM: domains: switch to keeping domain value in register ARM: 8419/1: dma-mapping: harmonize definition of DMA_ERROR_CODE ARM: 8417/1: refactor bitops functions with BIT_MASK() and BIT_WORD() ARM: 8416/1: Feroceon: use of_iomap() to map register base ARM: 8415/1: early fixmap support for earlycon ...
2015-09-03Merge branches 'cleanup', 'fixes', 'misc', 'omap-barrier' and 'uaccess' into ↵Russell King
for-linus
2015-09-01ARM: DRA752: Add ID detect for ES2.0Vishal Mahaveer
ES2.0 is a minor variant of ES1.1. ES2.0 is an incremental revision with various fixes including the following: - reset logic fixes - few assymetric aging logic fixes - MMC clock rate fixes - Ethernet speed fixes - edma fixes for mcasp NOTE: even though we use a compatible of dra742 and dra752, the usage in the Linux kernel is more or less interchangable - we use dra752 more often in the linux kernel compared to dra742 and 4.2-rc6 Signed-off-by: Vishal Mahaveer <vishalm@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-01ARM: OMAP3: vc: fix 'or' always true warningFrans Klaver
Fix the warning: arch/arm/mach-omap2/vc.c:302:47: warning: logical ‘or’ of collectively exhaustive tests is always true [-Wlogical-op] As we're toggling both CLKREQ and OFFMODE, we should also be checking OFFMODE. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-01ARM: OMAP2+: Fix booting if no timer parent clock is availableTony Lindgren
When bringing up a new SoC we needlessly prevent booting at timer init if timer clock_set_parent fails. This can fail if the system is booting on bootloader configured PLL values until the clock framework driver for the PLL is implemented. Let's just WARN instead, this will provide helpful information for anybody bringing up a new SoC what needs to be fixed. This allows to boot dm814x that's still missing the PLL driver. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-01ARM: OMAP2+: omap-device: fix race deferred probe of omap_hsmmc vs ↵Grygorii Strashko
omap_device_late_init Kernel fails to boot 50% of times (form build to build) with RT-patchset applied due to the following race - on late boot stages deferred_probe_work_func->omap_hsmmc_probe races with omap_device_late_ini. The same issue has been reported now on linux-next (4.3) by Keerthy [1] late_initcall - deferred_probe_initcal() tries to re-probe all pending driver's probe. - later on, some driver is probing in this case It's cpsw.c (but could be any other drivers) cpsw_init - platform_driver_register - really_probe - driver_bound - driver_deferred_probe_trigger and boot proceed. So, at this moment we have deferred_probe_work_func scheduled. late_initcall_sync - omap_device_late_init - omap_device_idle CPU1 CPU2 - deferred_probe_work_func - really_probe - omap_hsmmc_probe - pm_runtime_get_sync late_initcall_sync - omap_device_late_init if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { if (od->_state == OMAP_DEVICE_STATE_ENABLED) { - omap_device_idle [ops - IP is disabled] - [fail] - pm_runtime_put_sync - omap_hsmmc_runtime_suspend [ooops!] == log == omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 davinci_mdio 48485000.mdio: davinci mdio revision 1.6 davinci_mdio 48485000.mdio: detected phy mask fffffff3 libphy: 48485000.mdio: probed davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 cpsw 48484000.ethernet: Detected MACID = b4:99:4c:c7:d2:48 cpsw 48484000.ethernet: cpsw: Detected MACID = b4:99:4c:c7:d2:49 hctosys: unable to open rtc device (rtc0) omap_hsmmc 480b4000.mmc: omap_device_late_idle: enabled but no driver. Idling ldousb: disabling Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [00000000] *pgd=00000000 Internal error: : 1406 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 58 Comm: kworker/u4:1 Not tainted 4.1.2-rt1-00467-g6da3c0a-dirty #5 Hardware name: Generic DRA74X (Flattened Device Tree) Workqueue: deferwq deferred_probe_work_func task: ee6ddb00 ti: edd3c000 task.ti: edd3c000 PC is at omap_hsmmc_runtime_suspend+0x1c/0x12c LR is at _od_runtime_suspend+0xc/0x24 pc : [<c0471998>] lr : [<c0029590>] psr: a0000013 sp : edd3dda0 ip : ee6ddb00 fp : c07be540 r10: 00000000 r9 : c07be540 r8 : 00000008 r7 : 00000000 r6 : ee646c10 r5 : ee646c10 r4 : edd79380 r3 : fa0b4100 r2 : 00000000 r1 : 00000000 r0 : ee646c10 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 8000406a DAC: 00000015 Process kworker/u4:1 (pid: 58, stack limit = 0xedd3c218) Stack: (0xedd3dda0 to 0xedd3e000) dda0: ee646c70 ee646c10 c0029584 00000000 00000008 c0029590 ee646c70 ee646c10 ddc0: c0029584 c03adfb8 ee646c10 00000004 0000000c c03adff0 ee646c10 00000004 dde0: 0000000c c03ae4ec 00000000 edd3c000 ee646c10 00000004 ee646c70 00000004 de00: fa0b4000 c03aec20 ee6ddb00 ee646c10 00000004 ee646c70 ee646c10 fffffdfb de20: edd79380 00000000 fa0b4000 c03aee90 fffffdfb edd79000 ee646c00 c0474290 de40: 00000000 edda24c0 edd79380 edc81f00 00000000 00000200 00000001 c06dd488 de60: edda3960 ee646c10 ee646c10 c0824cc4 fffffdfb c0880c94 00000002 edc92600 de80: c0836378 c03a7f84 ee646c10 c0824cc4 00000000 c0880c80 c0880c94 c03a6568 dea0: 00000000 ee646c10 c03a66ac ee4f8000 00000000 00000001 edc92600 c03a4b40 dec0: ee404c94 edc83c4c ee646c10 ee646c10 ee646c44 c03a63c4 ee646c10 ee646c10 dee0: c0814448 c03a5aa8 ee646c10 c0814220 edd3c000 c03a5ec0 c0814250 ee6be400 df00: edd3c000 c004e5bc ee6ddb01 00000078 ee6ddb00 ee4f8000 ee6be418 edd3c000 df20: ee4f8028 00000088 c0836045 ee4f8000 ee6be400 c004e928 ee4f8028 00000000 df40: c004e8ec 00000000 ee6bf1c0 ee6be400 c004e8ec 00000000 00000000 00000000 df60: 00000000 c0053450 2e56fa97 00000000 afdffbd7 ee6be400 00000000 00000000 df80: edd3df80 edd3df80 00000000 00000000 edd3df90 edd3df90 edd3dfac ee6bf1c0 dfa0: c0053384 00000000 00000000 c000f668 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 f1fc9d7e febfbdff [<c0471998>] (omap_hsmmc_runtime_suspend) from [<c0029590>] (_od_runtime_suspend+0xc/0x24) [<c0029590>] (_od_runtime_suspend) from [<c03adfb8>] (__rpm_callback+0x24/0x3c) [<c03adfb8>] (__rpm_callback) from [<c03adff0>] (rpm_callback+0x20/0x80) [<c03adff0>] (rpm_callback) from [<c03ae4ec>] (rpm_suspend+0xe4/0x618) [<c03ae4ec>] (rpm_suspend) from [<c03aee90>] (__pm_runtime_idle+0x60/0x80) [<c03aee90>] (__pm_runtime_idle) from [<c0474290>] (omap_hsmmc_probe+0x6bc/0xa7c) [<c0474290>] (omap_hsmmc_probe) from [<c03a7f84>] (platform_drv_probe+0x44/0xa4) [<c03a7f84>] (platform_drv_probe) from [<c03a6568>] (driver_probe_device+0x170/0x2b4) [<c03a6568>] (driver_probe_device) from [<c03a4b40>] (bus_for_each_drv+0x64/0x98) [<c03a4b40>] (bus_for_each_drv) from [<c03a63c4>] (device_attach+0x70/0x88) [<c03a63c4>] (device_attach) from [<c03a5aa8>] (bus_probe_device+0x84/0xac) [<c03a5aa8>] (bus_probe_device) from [<c03a5ec0>] (deferred_probe_work_func+0x58/0x88) [<c03a5ec0>] (deferred_probe_work_func) from [<c004e5bc>] (process_one_work+0x134/0x464) [<c004e5bc>] (process_one_work) from [<c004e928>] (worker_thread+0x3c/0x4fc) [<c004e928>] (worker_thread) from [<c0053450>] (kthread+0xcc/0xe4) [<c0053450>] (kthread) from [<c000f668>] (ret_from_fork+0x14/0x2c) Code: e594302c e593202c e584205c e594302c (e5932128) ---[ end trace 0000000000000002 ]--- The issue happens because omap_device_late_init() do not take into account that some drivers are present, but their probes were not finished successfully and where deferred instead. This is the valid case, and omap_device_late_init() should not idle such devices. To fix this issue, the value of omap_device->_driver_status field should be checked not only for BUS_NOTIFY_BOUND_DRIVER (driver is present and has been bound to device successfully), but also checked for BUS_NOTIFY_BIND_DRIVER (driver about to be bound) - which means driver is present and there was try to bind it to device. [1] http://www.spinics.net/lists/arm-kernel/msg441880.html Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-01Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Ladies and gentlemen, we proudly announce to you the latest branch of ARM device tree contents for the mainline kernel. Come and see, come and see! No less than twentythree thousand lines of additions! Just imagine the joy you will have of using your mainline kernel on newly supported hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or UniPhier hardware! For those of you feeling less adventurous, added hardware support on platforms such as TI DM814x and Gumstix Overo platforms might be more of your liking. We've got something for everyone here! Ahem. Cough. So, anyway... This is the usual large batch of DT updates. Lots and lots of smaller changes, some of the larger ones to point out are: - Rockchip veyron (Chromebook) support, as well as several other new boards - DRM support on Atmel AT91SAM9N12EK - USB additions on some Allwinner platforms - Mediatek MT6580 support - Freescale i.MX6UL support - cleanups for Renesas shmobile platforms - lots of added devices on LPC18xx - lots of added devices and boards on UniPhier There's also some dependent code added here, in particular some branches that are primarily merged through the clock tree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits) ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes ARM: dts: rockchip: correct regulator power states for suspend ARM: dts: rockchip: correct regulator PM properties ARM: dts: vexpress: Use assigned-clock-parents for sp810 pinctrl: tegra: Only set the gpio range if needed arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain ...
2015-09-01Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "New or improved SoC support: - add support for Atmel's SAMA5D2 SoC - add support for Freescale i.MX6UL - improved support for TI's DM814x platform - misc fixes and improvements for RockChip platforms - Marvell MVEBU suspend/resume support A few driver changes that ideally would belong in the drivers branch are also here (acked by appropriate maintainers): - power key input driver for Freescale platforms (svns) - RTC driver updates for Freescale platforms (svns/mxc) - clk fixes for TI DM814/816X + a bunch of other changes for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: rockchip: pm: Fix PTR_ERR() argument ARM: imx: mach-imx6ul: Fix allmodconfig build clk: ti: fix for definition movement ARM: uniphier: drop v7_invalidate_l1 call at secondary entry memory: kill off set_irq_flags usage rtc: snvs: select option REGMAP_MMIO ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAE ARM: BCM: Enable ARM erratum 798181 for BRCMSTB ARM: OMAP2+: Fix power domain operations regression caused by 81xx ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend ARM: rockchip: set correct stabilization thresholds in suspend ARM: rockchip: rename osc_switch_to_32k variable ARM: imx6ul: add fec MAC refrence clock and phy fixup init ARM: imx6ul: add fec bits to GPR syscon definition rtc: mxc: add support of device tree dt-binding: document the binding for mxc rtc rtc: mxc: use a second rtc clock ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback soc: mediatek: Fix SCPSYS compilation ARM: at91/soc: add basic support for new sama5d2 SoC ...
2015-09-01Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "A large cleanup branch this release, with a healthy 10k negative line delta. Most of this is removal of legacy (non-DT) support of shmobile platforms. There is also removal of two non-DT platforms on OMAP, and the plat-samsung directory is cleaned out by moving most of the previously shared-location-but-not-actually-shared files from there to the appropriate mach directories instead. There are other sets of changes in here as well: - Rob Herring removed use of set_irq_flags under all platforms and moved to genirq alternatives - a series of timer API conversions to set-state interface - ep93xx, nomadik and ux500 cleanups from Linus Walleij - __init annotation fixes from Nicolas Pitre + a bunch of other changes that all add up to a nice set of cleanups" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (108 commits) ARM/fb: ep93xx: switch framebuffer to use modedb only ARM: gemini: Setup timer3 as free running timer ARM: gemini: Use timer1 for clockevent ARM: gemini: Add missing register definitions for gemini timer ARM: ep93xx/timer: Migrate to new 'set-state' interface ARM: nomadik: push accelerometer down to boards ARM: nomadik: move l2x0 setup to device tree ARM: nomadik: selectively enable UART0 on boards ARM: nomadik: move hog code to use DT hogs ARM: shmobile: Fix mismerges ARM: ux500: simplify secondary CPU boot ARM: SAMSUNG: remove keypad-core header in plat-samsung ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx ARM: SAMSUNG: local onenand-core header in mach-s3c64xx ARM: SAMSUNG: local irq-uart header in mach-s3c64xx ARM: SAMSUNG: local backlight header in mach-s3c64xx ARM: SAMSUNG: local ata-core header in mach-s3c64xx ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx ARM: SAMSUNG: local spi-core header in mach-s3c24xx ARM: SAMSUNG: local nand-core header in mach-s3c24xx ...
2015-08-31Merge tag 'clk-for-linus-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Michael Turquette: "The clk framework changes for 4.3 are mostly updates to existing drivers and the addition of new clock drivers. Stephen Boyd has also done a lot of subsystem-wide driver clean-ups (thanks!). There are also fixes to the framework core and changes to better split clock provider drivers from clock consumer drivers" * tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: s5pv210: add missing call to samsung_clk_of_add_provider() clk: pistachio: correct critical clock list clk: pistachio: Fix PLL rate calculation in integer mode clk: pistachio: Fix override of clk-pll settings from boot loader clk: pistachio: Fix 32bit integer overflows clk: tegra: Fix some static checker problems clk: qcom: Fix MSM8916 prng clock enable bit clk: Add missing header for 'bool' definition to clk-conf.h drivers/clk: appropriate __init annotation for const data clk: rockchip: register pll mux before pll itself clk: add bindings for the Ux500 clocks clk/ARM: move Ux500 PRCC bases to the device tree clk: remove duplicated code with __clk_set_parent_after clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw) clk: Constify clk_hw argument to provider APIs clk: Hi6220: add stub clock driver dt-bindings: clk: Hi6220: Document stub clock driver dt-bindings: arm: Hi6220: add doc for SRAM controller clk: atlas7: fix pll missed divide NR in fraction mode clk: atlas7: fix bit field and its root clk for coresight_tpiu ...
2015-08-24ARM: OMAP: Convert __clk_get_rate() to provider/consumer APIsStephen Boyd
We're removing struct clk from the clk provider API, so switch to clk_get_rate() and clk_hw_get_rate() here appropriately. Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-20ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanismGrygorii Strashko
The conversion of the wakeupgen irqchip to hierarchical irq domains failed to provide a mechanism to properly set the trigger type of an interrupt. The wakeupgen irq chip itself has no mechanism and therefor no irq_set_type() callback. The code before the conversion relayed the trigger configuration directly to the underlying GIC. Restore the correct behaviour by setting the wakeupgen irq_set_type callback to irq_chip_set_type_parent(). This propagates the set_trigger() call to the underlying GIC irqchip. [ tglx: Massaged changelog ] Fixes: 7136d457f365 ('ARM: omap: convert wakeupgen to stacked domains') Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: <linux@arm.linux.org.uk> Cc: <nsekhar@ti.com> Cc: <jason@lakedaemon.net> Cc: <balbi@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <marc.zyngier@arm.com> Cc: stable@vger.kernel.org # 4.1 Link: http://lkml.kernel.org/r/1439554830-19502-5-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-06ARM: OMAP2+: Fix power domain operations regression caused by 81xxTony Lindgren
I managed to mess up omap3 power domain operations with commit 7c80a3f89c51 ("ARM: OMAP2+: Add custom prwdm_operations for 81xx to support dm814x"), by default we should keep on using the omap3_pwrdm_operations, only 81xx needs custom handling. This causes omap3 PM to break so we won't hit off mode any longer causing idle power consumption go up from less than 10mW to over 50 mW. Fixs: 7c80a3f89c51 ("ARM: OMAP2+: Add custom prwdm_operations for 81xx to support dm814x") Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-06Merge branch 'fixes' into next/cleanupOlof Johansson
* fixes: (28 commits) ARM: ux500: add an SMP enablement type and move cpu nodes ARM: dts: keystone: fix dt bindings to use post div register for mainpll ARM: nomadik: disable UART0 on Nomadik boards ARM: dts: i.MX35: Fix can support. ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc ARM: dts: add CPU OPP and regulator supply property for exynos4210 ARM: dts: Update video-phy node with syscon phandle for exynos3250 ARM: keystone: dts: rename pcie nodes to help override status ARM: keystone: dts: fix dt bindings for PCIe ARM: pxa: fix dm9000 platform data regression ARM: DRA7: hwmod: fix gpmc hwmod ARM: dts: Correct audio input route & set mic bias for am335x-pepper ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX MAINTAINERS: digicolor: add dts files ARM: ux500: fix MMC/SD card regression ARM: ux500: define serial port aliases ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs ARM: dts: Fix frequency scaling on Gumstix Pepper ARM: dts: configure regulators for Gumstix Pepper ...
2015-07-28Merge branch 'cleanup-clk-h-includes' into clk-nextStephen Boyd
* cleanup-clk-h-includes: (62 commits) clk: Remove clk.h from clk-provider.h clk: h8300: Remove clk.h and clkdev.h includes clk: at91: Include clk.h and slab.h clk: ti: Switch clk-provider.h include to clk.h clk: pistachio: Include clk.h clk: ingenic: Include clk.h clk: si570: Include clk.h clk: moxart: Include clk.h clk: cdce925: Include clk.h clk: Include clk.h in clk.c clk: zynq: Include clk.h clk: ti: Include clk.h clk: sunxi: Include clk.h and remove unused clkdev.h includes clk: st: Include clk.h clk: qcom: Include clk.h clk: highbank: Include clk.h clk: bcm: Include clk.h clk: versatile: Remove clk.h and clkdev.h includes clk: ux500: Remove clk.h and clkdev.h includes clk: tegra: Properly include clk.h ...
2015-07-28Merge branch 'for-4.2/ti-clk-move' of https://github.com/t-kristo/linux-pm ↵Stephen Boyd
into clk-next From Tero Kristo: "This pull request contains the TI clock driver set to move the clock implementations under clock driver. Some small portions of the clock driver code still remain under mach-omap2 after this, it should be decided whether this code is now obsolete and should be deleted or should someone try to fix it." Slight merge conflicts with determine_rate prototype changes.
2015-07-28ARM: appropriate __init annotation for const dataNicolas Pitre
Init data marked const should be annotated with __initconst for correctness and not __initdata. In some cases the array gathering references to that data has to be marked const as well. This fixes LTO builds that otherwise fail with section mismatch errors. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27clk: change clk_ops' ->determine_rate() prototypeBoris Brezillon
Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-26Merge tag 'for-v4.2-rc/omap-fixes-a' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes Merge "ARM: OMAP2+: hwmod fixes for v4.2-rc" from Paul Walmsley: ARM: OMAP2+: hwmod fixes for v4.2-rc Two fixes against v4.2-rc1. The first, for DRA7xx platforms, corrects some incorrect GPMC hardware description data. The second one will ensure that the hwmod code will wait for any module with CPU-accessible registers to become ready before attempting to access it. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/omap-hwmod-a-for-v4.2-rc/20150723065408/ Note that I do not have a DRA7xx or AM43xx board, and therefore cannot test on those platforms. * tag 'for-v4.2-rc/omap-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc ARM: DRA7: hwmod: fix gpmc hwmod Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-25ARM: omap2: restore OMAP4 barrier behaviourRussell King
Restore the OMAP4 barrier behaviour using the new implementation which allows multiplatform systems to hook into the mb() and wmb() ARM implementations to perform any necessary additional barrier maintanence. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-07-25Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688"Russell King
This reverts commit 606da4826b89b044b51e3a84958b802204cfe4c7. We actually need this code for proper behaviour of OMAP4, and it needs fixing a different way other than just removing the code. Disabling code which is necessary in the hopes of persuing multiplatform kernels is a stupid approach. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-07-23ARM: OMAP2+: Add custom abort handler for t410Tony Lindgren
Similar to commit fdf4850cb5b2 ("ARM: BCM5301X: workaround suppress fault"), let's add custom handling for the aborts on t410 that prevent booting: Unhandled fault: imprecise external abort (0xc06) at 0xee091fb0 pgd = ee4bc000 [ee091fb0] *pgd=ae00041e(bad) Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-23Merge branch 'dm814x-soc' into omap-for-v4.3/socTony Lindgren
Update dm814x changes for sparse fixes to make data structures static. Conflicts: arch/arm/mach-omap2/omap_hwmod_81xx_data.c
2015-07-23ARM: OMAP2: Add minimal dm814x hwmod supportTony Lindgren
Let's add minimal set of dm814x hwmods to have a bootable system. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-23ARM: OMAP2+: Prepare dm81xx hwmod code for adding minimal dm814x supportTony Lindgren
Let's change the defines so we can share the hwmod code better between dm816x and dm814x, and let's add the dm814x specific defines. And let's rename the shared ones to start with dm81xx. No functional changes. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-23Merge tag 'for-v4.3/omap-hwmod-prcm-a' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v4.3/soc ARM: OMAP2+: PRCM and hwmod changes for v4.3 This series adds: - I/O wakeup support for AM43xx - register lock and unlock support to the hwmod code (needed for the RTC IP blocks on some chips) - several fixes for sparse warnings and an unnecessary null pointer test - a DRA7xx clockdomain configuration workaround, to deal with some hardware bugs Basic build, boot, and PM tests are here: http://www.pwsan.com/omap/testlogs/hwmod-prcm-for-v4.3/20150723080012/ Since I do not have an AM43xx or DRA7xx device, I can't test on those platforms.
2015-07-23Merge branch 'prcm-a-for-v4.3' into hwmod-prcm-for-v4.3Paul Walmsley
2015-07-23ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without syscRoger Quadros
For hwmods without sysc, _init_mpu_rt_base(oh) won't be called and so _find_mpu_rt_port(oh) will return NULL thus preventing ready state check on those modules after the module is enabled. This can potentially cause a bus access error if the module is accessed before the module is ready. Fix this by unconditionally calling _init_mpu_rt_base() during hwmod _init(). Do ioremap only if we need SYSC access. Eventhough _wait_target_ready() check doesn't really need MPU RT port but just the PRCM registers, we still mandate that the hwmod must have an MPU RT port if ready state check needs to be done. Else it would mean that the module is not accessible by MPU so there is no point in waiting for target to be ready. e.g. this fixes the below DCAN bus access error on AM437x-gp-evm. [ 16.672978] ------------[ cut here ]------------ [ 16.677885] WARNING: CPU: 0 PID: 1580 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x234/0x35c() [ 16.687946] 44000000.ocp:L3 Custom Error: MASTER M2 (64-bit) TARGET L4_PER_0 (Read): Data Access in User mode during Functional access [ 16.700654] Modules linked in: xhci_hcd btwilink ti_vpfe dwc3 videobuf2_core ov2659 bluetooth v4l2_common videodev ti_am335x_adc kfifo_buf industrialio c_can_platform videobuf2_dma_contig media snd_soc_tlv320aic3x pixcir_i2c_ts c_can dc [ 16.731144] CPU: 0 PID: 1580 Comm: rpc.statd Not tainted 3.14.26-02561-gf733aa036398 #180 [ 16.739747] Backtrace: [ 16.742336] [<c0011108>] (dump_backtrace) from [<c00112a4>] (show_stack+0x18/0x1c) [ 16.750285] r6:00000093 r5:00000009 r4:eab5b8a8 r3:00000000 [ 16.756252] [<c001128c>] (show_stack) from [<c05a4418>] (dump_stack+0x20/0x28) [ 16.763870] [<c05a43f8>] (dump_stack) from [<c0037120>] (warn_slowpath_common+0x6c/0x8c) [ 16.772408] [<c00370b4>] (warn_slowpath_common) from [<c00371e4>] (warn_slowpath_fmt+0x38/0x40) [ 16.781550] r8:c05d1f90 r7:c0730844 r6:c0730448 r5:80080003 r4:ed0cd210 [ 16.788626] [<c00371b0>] (warn_slowpath_fmt) from [<c027fa94>] (l3_interrupt_handler+0x234/0x35c) [ 16.797968] r3:ed0cd480 r2:c0730508 [ 16.801747] [<c027f860>] (l3_interrupt_handler) from [<c0063758>] (handle_irq_event_percpu+0x54/0x1bc) [ 16.811533] r10:ed005600 r9:c084855b r8:0000002a r7:00000000 r6:00000000 r5:0000002a [ 16.819780] r4:ed0e6d80 [ 16.822453] [<c0063704>] (handle_irq_event_percpu) from [<c00638f0>] (handle_irq_event+0x30/0x40) [ 16.831789] r10:eb2b6938 r9:eb2b6960 r8:bf011420 r7:fa240100 r6:00000000 r5:0000002a [ 16.840052] r4:ed005600 [ 16.842744] [<c00638c0>] (handle_irq_event) from [<c00661d8>] (handle_fasteoi_irq+0x74/0x128) [ 16.851702] r4:ed005600 r3:00000000 [ 16.855479] [<c0066164>] (handle_fasteoi_irq) from [<c0063068>] (generic_handle_irq+0x28/0x38) [ 16.864523] r4:0000002a r3:c0066164 [ 16.868294] [<c0063040>] (generic_handle_irq) from [<c000ef60>] (handle_IRQ+0x38/0x8c) [ 16.876612] r4:c081c640 r3:00000202 [ 16.880380] [<c000ef28>] (handle_IRQ) from [<c00084f0>] (gic_handle_irq+0x30/0x5c) [ 16.888328] r6:eab5ba38 r5:c0804460 r4:fa24010c r3:00000100 [ 16.894303] [<c00084c0>] (gic_handle_irq) from [<c05a8d80>] (__irq_svc+0x40/0x50) [ 16.902193] Exception stack(0xeab5ba38 to 0xeab5ba80) [ 16.907499] ba20: 00000000 00000006 [ 16.916108] ba40: fa1d0000 fa1d0008 ed3d3000 eab5bab4 ed3d3460 c0842af4 bf011420 eb2b6960 [ 16.924716] ba60: eb2b6938 eab5ba8c eab5ba90 eab5ba80 bf035220 bf07702c 600f0013 ffffffff [ 16.933317] r7:eab5ba6c r6:ffffffff r5:600f0013 r4:bf07702c [ 16.939317] [<bf077000>] (c_can_plat_read_reg_aligned_to_16bit [c_can_platform]) from [<bf035220>] (c_can_get_berr_counter+0x38/0x64 [c_can]) [ 16.952696] [<bf0351e8>] (c_can_get_berr_counter [c_can]) from [<bf010294>] (can_fill_info+0x124/0x15c [can_dev]) [ 16.963480] r5:ec8c9740 r4:ed3d3000 [ 16.967253] [<bf010170>] (can_fill_info [can_dev]) from [<c0502fa8>] (rtnl_fill_ifinfo+0x58c/0x8fc) [ 16.976749] r6:ec8c9740 r5:ed3d3000 r4:eb2b6780 [ 16.981613] [<c0502a1c>] (rtnl_fill_ifinfo) from [<c0503408>] (rtnl_dump_ifinfo+0xf0/0x1dc) [ 16.990401] r10:ec8c9740 r9:00000000 r8:00000000 r7:00000000 r6:ebd4d1b4 r5:ed3d3000 [ 16.998671] r4:00000000 [ 17.001342] [<c0503318>] (rtnl_dump_ifinfo) from [<c050e6e4>] (netlink_dump+0xa8/0x1e0) [ 17.009772] r10:00000000 r9:00000000 r8:c0503318 r7:ebf3e6c0 r6:ebd4d1b4 r5:ec8c9740 [ 17.018050] r4:ebd4d000 [ 17.020714] [<c050e63c>] (netlink_dump) from [<c050ec10>] (__netlink_dump_start+0x104/0x154) [ 17.029591] r6:eab5bd34 r5:ec8c9980 r4:ebd4d000 [ 17.034454] [<c050eb0c>] (__netlink_dump_start) from [<c0505604>] (rtnetlink_rcv_msg+0x110/0x1f4) [ 17.043778] r7:00000000 r6:ec8c9980 r5:00000f40 r4:ebf3e6c0 [ 17.049743] [<c05054f4>] (rtnetlink_rcv_msg) from [<c05108e8>] (netlink_rcv_skb+0xb4/0xc8) [ 17.058449] r8:eab5bdac r7:ec8c9980 r6:c05054f4 r5:ec8c9980 r4:ebf3e6c0 [ 17.065534] [<c0510834>] (netlink_rcv_skb) from [<c0504134>] (rtnetlink_rcv+0x24/0x2c) [ 17.073854] r6:ebd4d000 r5:00000014 r4:ec8c9980 r3:c0504110 [ 17.079846] [<c0504110>] (rtnetlink_rcv) from [<c05102ac>] (netlink_unicast+0x180/0x1ec) [ 17.088363] r4:ed0c6800 r3:c0504110 [ 17.092113] [<c051012c>] (netlink_unicast) from [<c0510670>] (netlink_sendmsg+0x2ac/0x380) [ 17.100813] r10:00000000 r8:00000008 r7:ec8c9980 r6:ebd4d000 r5:eab5be70 r4:eab5bee4 [ 17.109083] [<c05103c4>] (netlink_sendmsg) from [<c04dfdb4>] (sock_sendmsg+0x90/0xb0) [ 17.117305] r10:00000000 r9:eab5a000 r8:becdda3c r7:0000000c r6:ea978400 r5:eab5be70 [ 17.125563] r4:c05103c4 [ 17.128225] [<c04dfd24>] (sock_sendmsg) from [<c04e1c28>] (SyS_sendto+0xb8/0xdc) [ 17.136001] r6:becdda5c r5:00000014 r4:ecd37040 [ 17.140876] [<c04e1b70>] (SyS_sendto) from [<c000e680>] (ret_fast_syscall+0x0/0x30) [ 17.148923] r10:00000000 r8:c000e804 r7:00000122 r6:becdda5c r5:0000000c r4:becdda5c [ 17.157169] ---[ end trace 2b71e15b38f58bad ]--- Fixes: 6423d6df1440 ("ARM: OMAP2+: hwmod: check for module address space during init") Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: <stable@vger.kernel.org>
2015-07-23ARM: PRM: AM437x: Enable IO wakeup featureKeerthy
Enable IO wakeup feature. This enables am437x pads to generate daisy chained wake ups(eventually generates aprcm Interrupt) especially when in low power modes. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-07-23ARM: OMAP4+: PRM: Add AM437x specific dataKeerthy
The register offsets for some of the PRM Registers are different hence populating the differing fields. This is needed to support IO wake up feature for am437x family. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-07-23ARM: OMAP: PRM: Remove hardcoding of IRQENABLE_MPU_2 and IRQSTATUS_MPU_2 ↵Keerthy
register offsets The register offsets of IRQENABLE_MPU_2 and IRQSTATUS_MPU_2 are hardcoded. This makes it difficult to reuse the code for SoCs like AM437x that have a single instance of IRQENABLE_MPU and IRQSTATUS_MPU registers. Hence handling the case using offset of 4 to accommodate single set of IRQ* registers generically. Signed-off-by: Keerthy <j-keerthy@ti.com> [paul@pwsan.com: fixed whitespace alignment problems reported by checkpatch.pl] Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-07-23ARM: AM43xx: Add the PRM IRQ register offsetsKeerthy
Add the PRM IRQ register offsets. This is needed to support PRM I/O wakeup on AM43xx. Signed-off-by: Keerthy <j-keerthy@ti.com> [paul@pwsan.com: improved patch description, moved the PRM_IO_PMCTRL macro out of the CM section] Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-07-23ARM: OMAP4: PRM: Remove hardcoding of PRM_IO_PMCTRL_OFFSET registerKeerthy
PRM_IO_PMCTRL_OFFSET need not be same for all SOCs hence remove hardcoding and use the value provided by the omap_prcm_irq_setup structure. This is done to support IO wakeup on am437x series. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-07-22Merge tag 'omap-for-v4.3/legacy-v2-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup Merge "drop few more legacy boards for v4.3" from Tony Lindgren: Drop more omap3 legacy board-*.c files for v4.3. This time we're dropping the board files for omap3logic and omap3pandora. The reason for dropping these now rather than later is that now we can simply revert the patches in case of unexpected issues as we are not dropping any platform data at this point. This leaves us with only the following board-*.c files: BOARD REASON NEEDED board-ldp.c Still used in RMKs boot test system board-rx51-*.c Needs /proc/atags support for user space Once we have the n900 legacy user space issues sorted out for /proc/atags and system_rev, we can drop the remaining two board-*.c files. And then one merge window after that we can drop the legacy booting support assuming no unexpected issues are found. * tag 'omap-for-v4.3/legacy-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove legacy booting support for Pandora ARM: OMAP2+: Remove legacy booting support for LogicPD Torpedo Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-21ARM: OMAP2+: omap3-pandora: add wifi supportGrazvydas Ignotas
Add wl1251 support via pdata-quirks as it's driver lacks DT support. MMC3 is marked disabled in DT so that MMC3 instance of hsmmc driver is probed using platform data with special card init callback. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-21ARM: OMAP2+: omap3-pandora: add backlight supportGrazvydas Ignotas
Add backlight support via pdata-quirks as it's driver lacks DT support. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-20ARM: OMAP2+: Include clk.hStephen Boyd
These files use the consumer API, so include clk.h explicitly. Acked-by: Tero Kristo <t-kristo@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-17ARM/omap2/timer: Migrate to new 'set-state' interfaceViresh Kumar
Migrate omap2 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2015-07-16ARM: OMAP2+: Remove legacy booting support for PandoraTony Lindgren
We've been moving all omap2+ based systems to boot in device tree only mode for a few years now. Only omap3 has legacy booting support remaining. Most omap3 boards already have related arch/arm/boot/*.dts* files for booting with device tree. This board has support for device tree based booting, and we've been printing warnings about the legacy booting being deprecated for a few merge cycles now. Let's attempt to remove the legacy booting for it. The reason for removing the legacy booting support now rather than later is we can simply revert this patch if necessary if we run into some unexpected issues that are not trivial to fix for the device tree based booting. Cc: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-16ARM: OMAP2+: Add support for initializing dm814x clocksTony Lindgren
Let's add a minimal clocks for dm814x to get it booted. This is mostly a placeholder and relies on the PLLs being on from the bootloader. Note that the divider clocks work the same way as on dm816x and am335x. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 06:04:00 +0000