summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
AgeCommit message (Collapse)Author
2016-06-22ARM: OMAP: make ti81xx_rtc_hwmod staticBen Dooks
The ti81xx_rtc_hwmod is not exported, or declared outside the file arch/arm/mach-omap2/omap_hwmod_81xx_data.c so make it static to avoid the following warning: arch/arm/mach-omap2/omap_hwmod_81xx_data.c:246:19: warning: symbol 'ti81xx_rtc_hwmod' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-30Merge tag 'for-v4.6-rc/omap-fixes-a' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v4.6/fixes ARM: OMAP2+: first hwmod fix for v4.6-rc Fix a longstanding bug in the hwmod code that could cause hardware SYSCONFIG register values to not match the kernel's idea of what they should be, and that could result in lower performance during IP block idle entry. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/omap-hwmod-fixes-a-for-v4.6-rc/20160326231727/
2016-03-20Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "Newly added support for additional SoCs: - Axis Artpec-6 SoC family - Allwinner A83T SoC - Mediatek MT7623 - NXP i.MX6QP SoC - ST Microelectronics stm32f469 microcontroller New features: - SMP support for Mediatek mt2701 - Big-endian support for NXP i.MX - DaVinci now uses the new DMA engine dma_slave_map - OMAP now uses the new DMA engine dma_slave_map - earlyprintk support for palmchip uart on mach-tango - delay timer support for orion Other: - Exynos PMU driver moved out to drivers/soc/ - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: uniphier: rework SMP code to support new System Bus binding ARM: uniphier: add missing of_node_put() ARM: at91: avoid defining CONFIG_* symbols in source code ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1 ARM: imx: Make reset_control_ops const ARM: imx: Do L2 errata only if the L2 cache isn't enabled ARM: imx: select ARM_CPU_SUSPEND only for imx6 dmaengine: pxa_dma: fix the maximum requestor line ARM: alpine: select the Alpine MSI controller driver ARM: pxa: add the number of DMA requestor lines dmaengine: mmp-pdma: add number of requestors dma: mmp_pdma: Add the #dma-requests DT property documentation ARM: OMAP2+: Add rtc hwmod configuration for ti81xx ARM: s3c24xx: Avoid warning for inb/outb ARM: zynq: Move early printk virtual address to vmalloc area ARM: DRA7: hwmod: Add custom reset handler for PCIeSS ARM: SAMSUNG: Remove unused register offset definition ARM: EXYNOS: Cleanup header files inclusion drivers: soc: samsung: Enable COMPILE_TEST MAINTAINERS: Add maintainers entry for drivers/soc/samsung ...
2016-03-02ARM: OMAP2+: Use srst_udelay for USB on dm814xTony Lindgren
Without this booting t410 can fail randomly with no output depending on the .config options chosen. Enabling debug_ll causes the problem to go away. I narrowed this down to USB by disabling one module at a time. Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: OMAP2+: Fix hwmod clock for l4_lsTony Lindgren
Looks like we have few cases with wrong clock, and some entries with missing clock. It should always be sysclk6 for the l4_ls instance. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: OMAP2+: Add rtc hwmod configuration for ti81xxTony Lindgren
This allows RTC to work properly with the related DTS changes. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-20Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Updates for new platform support: - New platform: Tango4 from Sigma Designs. - Broadcom BCM2836 (Raspberry Pi 2 SoC) - Enable cpufreq on Freescale i.MX7D - Rockchip: SMP support for rk3036, general support for rk3228 - SMP support on Broadcom Kona and NSP - Cleanups for OMAP removing legacy IOMMU data + a bunch of misc fixes and tweaks for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: tango: Fix UP build issues ARM: tango: pass ARM arch level for smc.S ARM: bcm2835: Add Kconfig support for bcm2836 ARM: OMAP2+: Add support for dm814x and dra62x usb ARM: OMAP2+: Add mmc hwmod entries for dm814x ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx ARM: OMAP2+: Fix SoC detection for dra62x j5-eco ARM: tango4: Initial platform support ARM: bcm2835: Add a compat string for bcm2836 machine probe dt-bindings: Add root properties for Raspberry Pi 2 ARM: imx: select SRC for i.MX7 ARM: uniphier: select PINCTRL ARM: OMAP2+: Remove device creation for omap-pcm-audio ARM: OMAP1: Remove device creation for omap-pcm-audio ARM: rockchip: enable support for RK3228 SoCs ARM: rockchip: use const and __initconst for rk3036 smp_operations ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER ARM: BCM: Add SMP support for Broadcom 4708 ARM: BCM: Add SMP support for Broadcom NSP ARM: BCM: Clean up SMP support for Broadcom Kona ...
2015-12-31Merge tag 'omap-for-v4.5/81xx-soc-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "reworked soc changes for ti81xx devices and minimal dra62x j5ec-evm support" from Tony Lindgren: Add minimal SoC support for dra62x also known as j5eco. As it's closely related to dm814x, we can treat it as a dm814x variant for now and do rest of the configuration with DTS just files. And let's add hwmod support for MMC and USB on dm814x and dra62x. * tag 'omap-for-v4.5/81xx-soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Add support for dm814x and dra62x usb ARM: OMAP2+: Add mmc hwmod entries for dm814x ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx ARM: OMAP2+: Fix SoC detection for dra62x j5-eco
2015-12-22ARM: OMAP2+: Add support for dm814x and dra62x usbTony Lindgren
The usb phys are different on dm814x compared to dm816x so we need to use the clkdcoldo output for usb. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: OMAP2+: Add mmc hwmod entries for dm814xTony Lindgren
Let's add mmc entries for dm814x. To do that, we need to rename some entries to be common for 81xx. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22Merge tag 'omap-for-v4.5/soc-initcall' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc SoC changes for omaps for v4.5 merge window. The main change here is to change the omap initcall levels a bit to initialize things later to allow early device drivers at core_initcall level. This makes things easier for us as most clocks can be made into regular device drivers except for a few early clocks needed to initialize system timers. I wanted to have these changes sit in Linux next for a few weeks before sending out a pull request, and so far now issues have showed up. The other changes in this series are timer changes for making use of the new PWM driver, and timer changes to support more high security SoCs. Also few minor improvments for module autoidle settings for ti81xx spinbox and dra7 debug on uart4 in hwmod code. The rest is pretty much just removal of platform data for SoCs that are all device tree only nowadays. * tag 'omap-for-v4.5/soc-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove device creation for omap-pcm-audio ARM: OMAP1: Remove device creation for omap-pcm-audio ARM: OMAP2+: Change core_initcall levels to postcore_initcall ARM: DRA7: hwmod: Enable DEBUG_LL for UART4 ARM: OMAP: RX-51: fix a typo in log writing ARM: omap4: hwmod: Remove elm address space from hwmod data ARM: OMAP2+: timer: Remove secure timer for DRA7xx HS devices ARM: OMAP: dmtimer: check for fixed timers during config ARM: OMAP2+: Remove omap_mmu_dev_attr structure ARM: OMAP4: hwmod data: Remove legacy IOMMU attr and addrs ARM: OMAP3: hwmod data: Remove legacy IOMMU data ARM: OMAP2+: Remove legacy device instantiation of IOMMUs ARM: OMAP2+: Add hwmod spinbox support for dm816x ARM: OMAP: add DT support for ti,dm816-timer ARM: OMAP: dmtimer: Add clock source from DT Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-09ARM: OMAP2+: Enable GPIO for dm814xTony Lindgren
With the basic clocks now working we can enable GPIO. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-09ARM: OMAP2+: Fix timer entries for dm814xTony Lindgren
There's a mux after the oscillator similar to am335x. I did not notice this on hp t410 as it boots even with no clocks configured. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-30ARM: OMAP2+: Add hwmod spinbox support for dm816xNeil Armstrong
Add dm81xx hwmod data entries for dm816x spinbox support. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-25arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod dataNeil Armstrong
Add missing HWMOD_NO_IDLEST hwmod flag for entries not having omap4 clkctrl values. The emac0 hwmod flag fixes the davinci_emac driver probe since the return of pm_resume() call is now checked. This solves the following boot errors : [ 0.121429] omap_hwmod: l4_ls: _wait_target_ready failed: -16 [ 0.121441] omap_hwmod: l4_ls: cannot be enabled for reset (3) [ 0.124342] omap_hwmod: l4_hs: _wait_target_ready failed: -16 [ 0.124352] omap_hwmod: l4_hs: cannot be enabled for reset (3) [ 1.967228] omap_hwmod: emac0: _wait_target_ready failed: -16 Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-23Merge branch 'dm814x-soc' into omap-for-v4.3/socTony Lindgren
Update dm814x changes for sparse fixes to make data structures static. Conflicts: arch/arm/mach-omap2/omap_hwmod_81xx_data.c
2015-07-23ARM: OMAP2: Add minimal dm814x hwmod supportTony Lindgren
Let's add minimal set of dm814x hwmods to have a bootable system. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-23ARM: OMAP2+: Prepare dm81xx hwmod code for adding minimal dm814x supportTony Lindgren
Let's change the defines so we can share the hwmod code better between dm816x and dm814x, and let's add the dm814x specific defines. And let's rename the shared ones to start with dm81xx. No functional changes. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-15ARM: OMAP2+: sparse: add missing static declarationSekhar Nori
Add missing static declaration for file local variables. This fixes sparse warnings of type: arch/arm/mach-omap2/omap_hwmod_81xx_data.c:491:26: warning: symbol 'dm81xx_alwon_l3_slow__gpmc' was not declared. Should it be static? Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-06-01memory: omap-gpmc: Add Kconfig option for debugTony Lindgren
We support decoding the bootloader values if DEBUG is defined. But we also need to change the struct omap_hwmod flags to have HWMOD_INIT_NO_RESET to avoid the GPMC being reset during the boot. Otherwise just the default timings will be displayed instead of the bootloader configured timings. This also allows us to clean up the various GPMC related hwmod flags. For debugging, we only need HWMOD_INIT_NO_RESET, and HWMOD_INIT_NO_IDLE is not needed. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-01-26ARM: OMAP2+: Add dm816x hwmod supportTony Lindgren
Add minimal hwmod support that works at least on dm8168. This is based on the code in the earlier TI CDP tree, and an earlier patch by Aida Mynzhasova <aida.mynzhasova@skitlab.ru>. I've set up things to work pretty much the same way as for am33xx. We are basically using cm33xx.c with a different set of clocks and clockdomains. This code is based on the TI81XX-LINUX-PSP-04.04.00.02 patches published at: http://downloads.ti.com/dsps/dsps_public_sw/psp/LinuxPSP/TI81XX_04_04/04_04_00_02/index_FDS.html Cc: Aida Mynzhasova <aida.mynzhasova@skitlab.ru> Cc: Brian Hutchinson <b.hutchman@gmail.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>