summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mxs
AgeCommit message (Collapse)Author
2011-02-01ARM: mxs/imx28: remove now unused clock lookup "fec.0"Uwe Kleine-König
Commit b2878fa (ARM: mx28: update clock and device name for dual fec support) added only the new lookups without removing the old one. Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mxs: fix clock base address missingShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-26ARM: mxs: acknowledge gpio irqUwe Kleine-König
This fixes a machine hang after a gpio irq triggered. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-24ARM i.MX23: use correct register for setting the rateSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com>
2011-01-24ARM i.MX23/28: remove secondary field from struct clk. It's unusedSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com>
2011-01-24ARM i.MX28: use correct register for setting the rateSascha Hauer
_CLK_SET_RATE does not only handle the cpu clock but also other clocks, so do not hardcode the HW_CLKCTRL_CPU register. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com>
2011-01-24ARM i.MX28: fix bit operationSascha Hauer
reg | (1 << clk->enable_shift) always evaluates to true. Switch it to & which makes much more sense Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com>
2011-01-14ARM mxs: clkdev related compile fixesSascha Hauer
Since commit 6d803ba (ARM: 6483/1: arm & sh: factorised duplicated clkdev.c) platforms need to select CLKDEV_LOOKUP instead of COMMON_CLKDEV and need to include <linux/clkdev.h>. Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-12ARM: mxs: Change duart device to use amba-pl011Shawn Guo
The mxs duart is actually an amba-pl011 device. This commit changes the duart device code to dynamically allocate amba-pl011 device, so that drivers/serial/amba-pl011.c can be used on mxs. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11ARM: mx28: add the second fec device registrationShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11ARM: mx28: update clock and device name for dual fec supportShawn Guo
Change device name from "fec" to "imx28-fec", so that fec driver can distinguish mx28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-20ARM: mxs: Add build configuration for mxsShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add initial mx28evk supportShawn Guo
Add initial mx28evk support with duart and fec0. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add initial mx23evk supportShawn Guo
Add initial mx23evk support with duart. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Dynamically allocate fec devicesShawn Guo
Dynamically allocate fec devices for MX28, which gets dual fec interface. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Dynamically allocate duart devicesShawn Guo
Dynamically allocate duart devices for MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add static memory mappingShawn Guo
Create static memory mapping for MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add clock supportShawn Guo
Add clock for MXS-based SoCs, MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add iomux supportShawn Guo
MXS-based SoCs implements iomux functions in block PINCTRL. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add gpio supportShawn Guo
MXS-based SoCs implement gpio support in block PINCTRL. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add timer supportShawn Guo
There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add low-level debug UART supportShawn Guo
- DEBUG_LL support, which is incompatible with multi-soc MXS image because of different DUART base address on MX23 and MX28 - uncompress message support Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add interrupt supportShawn Guo
Add Interrupt Collector (ICOLL) support for MXS-based. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add reset routinesShawn Guo
- The mxs wdog is implemented in RTC block. - There is a generic software reset routine for most modules on mxs. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-13ARM: mxs: Add helper definition and functionShawn Guo
Add helper definition and function for MXS-based. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-13ARM: mxs: Add core definitionsShawn Guo
Add core definitions for MXS-based SoC MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 01:17:11 +0000