summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mx3/mm.c
AgeCommit message (Collapse)Author
2011-03-07ARM i.MX: Move gpio initialization to SoC specific filesSascha Hauer
This saves us from soc level dispatching in generic files Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11ARM: mx3: remove some useless commentsUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxerUwe Kleine-König
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-19ARM: mx3: introduce SOC_IMX31 and SOC_IMX35Uwe Kleine-König
Additionally convert some known to be good usages to the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: use an MX35 constant in imx35 only codeUwe Kleine-König
... instead of MX3x Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: move registration of gpios to plat-mxc/gpio.cUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: use MXxy_IO_P2V macros to setup static mappingsUwe Kleine-König
This makes less code rely on the virtual constants. To further simplify code and reduce the needed boilerplate when defining the static mappings a new helper macro is defined in mach/hardware.h. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx3: fix the last users of IMX_NEEDS_DEPRECATED_SYMBOLSUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-10-11MX35: Fix bogus L2 cache settingsJuergen Beisert
i.MX35 CPUs marked with "MCIMX357CJQ5C M99V CTHA0943B" are coming with bogus L2 cache settings. If these settings are kept unmodified prior enabling the L2 cache the CPU runs amok immediately when its enabled. This fix should not hurt already working CPUs, as they are using the written register value already. Its currently unknown if its possible to detect the production lot from the software to fix only affected CPUs. While at it, make sure that mxc_init_l2x0 is only executed on i.MX31/35 Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26imx: move gpio init after to irq initJason Wang
The commit 9a763bf "get rid of mxc_gpio_init" changed gpio_init and irq_init sequence. Usually we will call set_irq_chained_handler in gpio_init functions, this should be called after the irq_init called, otherwise the chained irq can't get propoer irq_chip and this irq will remain masked even we called set_irq_chained_handler. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Tested-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-06-30ARM: mx3: remove paragraphs with old address of the FSFUwe Kleine-König
As the kernel contains a copy of the GPL anyhow just get rid of the address specification instead of fixing it. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24ARM: imx: get rid of mxc_gpio_initUwe Kleine-König
This function is defined once for each imx family and so is in the way when compiling a kernel for more than one SoC. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-01-04ARM: MX3: make CPU revision number detection work on all boardsWolfgang Denk
Commit 52939c03 (ARM: MX3: fix CPU revision number detection) started using the CPU's SREV register for revision number detection. This makes it mandatory to have a valid SPBA0 mapping. Add this to the global map_io code instead of adding multiple copies for each board. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested on Qong (EVB-Lite) Tested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-13fix compilation of i.MX31 platformsGuennadi Liakhovetski
mxc_iomux_v3_init() is defined in arch/arm/plat-mxc/iomux-v3.c, which is not linked for i.MX31 and produces an undefined reference error. Fix this by building the offending code only for i.MX35. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14iomux-v3: Allow for a runtime base addressSascha Hauer
also, check for a valid pad_ctrl_ofs before changing the pad control register. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mxc: turn to soc specific init_irq functionsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07system.c: runtime base addressSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07MXC: rename mxc_map_io to architecture specific versionsSascha Hauer
This allows us to have more mapping functions for more than one i.MX architecture in the kernel. As this is the earliest board specific hook we have, also use it to set the cpu type. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MX31: Move static virtual mappings of AIPS1/2 to common fileSascha Hauer
On MX31 we can't do much without mapping the AIPS1/2 register space. Move these mappings from individual boards to plat-mxc/mm.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MX31/MX35: Add l2x0 cache supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-01[ARM] Remove MT_NONSHARED_DEVICE aliasRussell King
Use MT_DEVICE_NONSHARED instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22[ARM] 4461/1: MXC platform and i.MX31ADS core supportQuinn Jensen
This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 04:27:48 +0000