| Age | Commit message (Collapse) | Author |
|---|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The TS-72xx/73xx boards have a CPLD watchdog which is configured to
reset the board after 8 seconds, if the kernel is large enough that this
takes about this time to decompress the kernel, we will encounter a
spurious reboot.
Do not pull ts72xx.h, but instead locally define what we need to disable
the watchdog.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The generic option DEBUG_LL_UART_PL01X is now used to select the UART
type for the kernel low-level debugging on the ep93xx platform. This
enables two config options to provide the physical and virtual base
address of the debug UART.
Use the generic options instead of providing platform specific options
to select the debug UART.
UART1 is selected with: DEBUG_UART_PHYS = 0x808c0000
DEBUG_UART_VIRT = 0xfedc0000
UART2 is selected with: DEBUG_UART_PHYS = 0x808d0000
DEBUG_UART_VIRT = 0xfedd0000
UART3 is selected with: DEBUG_UART_PHYS = 0x808e0000
DEBUG_UART_VIRT = 0xfede0000
The selected UART must already be initialized by the bootloader. If it
isn't setup nothing will appear (which might be desired).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Commit 210dce5f "ARM: ep93xx: properly wait for UART FIFO to be empty"
Removed the timeout loop while waiting for the uart transmit fifo to
empty. Some bootloaders leave the uart in a state where there might
be bytes in the uart that are not transmitted when execution is handed
over to the kernel. This results in a deadlocked system while waiting
for the fifo to empty.
Add back the timeout wait to prevent the deadlock.
Increase the wait time to hopefully prevent the decompressor corruption
that lead to commit 210dce5f. This corruption was probably due to a
slow uart baudrate. The 10* increase in the wait time should be enough
for all cases.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
|
|
With ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c,
all the arch_decomp_wdog() definition at platform level is unneeded.
Remmove it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
|
|
This patch changes the busy-waiting loop around in the decompressor
putc() function on the UART FIFO register. Without a proper wait, the
output of the decompressor was corrupted like this:
Uncompressing Linx. done, booting th enl
To highlight the issue more evidently, looping 100 times instead of 1000
makes the issue appear much faster. This patch takes the approach of
using an active while loop until the FIFO is empty (not FULL).
This issue happened to me on Sim.One running at 200Mhz.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
|
|
Currently on the EP93xx platform early kernel messages go to UART1.
Since this UART is the only one that has modem control signals it
might be used for another purpose and it is undesirable for those
messages to appear. This patch allows one of the other UARTs to be
selected in the kernel configuration. It is assumed that the
bootloader has configured and initialized the UART since this was the
previous assumption.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
