summaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91
AgeCommit message (Collapse)Author
2010-04-14ARM: 5974/1: arm/mach-at91 Makefile: remove two blanks.Ernst Schwab
Cosmetic change to mach-at91 Makefile: remove two blanks introduced by earlier patches. Signed-off-by: Ernst Schwab <eschwab@online.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 5975/1: AT91 slow-clock suspend: don't wait when turning PLLs offAnders Larsen
From: Julien Langer <julien.langer@gmail.com> AT91: when turning off the PLLs during suspend, don't wait for the lock flag to be set. Previously the code would always run into the loop limitation of 1000 iterations because the flag is never set when turning the PLLs off. Comments from Anders Larsen: (in http://marc.info/?l=linux-kernel&m=127058929724193&w=2) Signed-off-by: Julien Langer <julien.langer@gmail.com> Signed-off-by: Anders Larsen <al@alarsen.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-09ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lockAnders Larsen
at91 slow-clock resume: Don't wait for a disabled PLL to lock. We run into this problem with the PLLB on the at91: ohci-at91 disables the PLLB when going to suspend. The slowclock code however tries to do the same: It saves the PLLB register value and when restoring the value during resume, it waits for the PLLB to lock again. However the PLL will never lock and the loop would run into its timeout because the slowclock code just stored and restored an empty register. This fixes the problem by only restoring PLLA/PLLB when they were enabled at suspend time. Cc: Andrew Victor <avictor.za@gmail.com> Signed-off-by: Anders Larsen <al@alarsen.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-13ARM: 5986/1: at91sam9g20-ek: Correct braces in I2C registration codeRob Alley
The change introduced in patch 5596/1 used incorrect bracing which resulted in the AT24 EEPROM no longer being registered. This patch corrects the bracing and allows both the WM8731 audio device and AT24 EEPROM device to be registered. Signed-off-by: Rob Alley <rob.alley@navmanwireless.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-08Merge branch 'origin' into devel-stableRussell King
Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
2010-03-08Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
2010-02-25Merge branch 'tmpreg' into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/mach-ux500/include/mach/debug-macro.S
2010-02-12ARM: 5910/1: ARM: Add tmp register for addruart and loadspTony Lindgren
Otherwise more complicated uart configuration won't be possible. We can use r1 for tmp register for both head.S and debug.S. NOTE: This patch depends on another patch to add the the tmp register into all debug-macro.S files. That can be done with: $ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/" arch/arm/*/include/*/debug-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-05tree-wide: fix 'lenght' typo in comments and codeDaniel Mack
Some misspelled occurences of 'octet' and some comments were also fixed as I was on it. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Jiri Kosina <trivial@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-22arm/at91: Don't disable irqs in set_next_event and set_mode callbacksUwe Kleine-König
on AT91 the timer irq is shared, so the handler might be entered without irqs being disabled. Though this should not happen as the timer irq is registered early, there have been some reports on the mailing list. To make debugging that problem easier next time it pops up a WARN_ON_ONCE is added to the handler if irqs are not off. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-01-20ARM: 5851/1: [AT91] AT572D940HF-EK board supportAndrew Victor
Add support for the Atmel AT572D940HF-EK board (development board for the AT572D940HF processor). Signed-off-by: Antonio R. Costa <costa.antonior@gmail.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-20ARM: 5850/1: [AT91] AT572D940HF processor supportAndrew Victor
Add support for the Atmel AT572D940HF processor (DIOPSIS range). This processor integrates an ARM926 core, a DSP and the SoC peripherals usually found on an AT91 processor (USART, SSC, SPI, TWI, CAN, etc) Signed-off-by: Antonio R. Costa <costa.antonior@gmail.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-15atmel-mci: change use of dma slave interfaceNicolas Ferre
Allow the use of another DMA controller driver in atmel-mci sd/mmc driver. This adds a generic dma_slave pointer to the mci platform structure where we can store DMA controller information. In atmel-mci we use information provided by this structure to initialize the driver (with new helper functions that are architecture dependant). This also adds at32/avr32 chip modifications to cope with this new access method. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits) Input: appletouch - give up maintainership Input: dm355evm_kbd - switch to using sparse keymap library Input: wistron_btns - switch to using sparse keymap library Input: add generic support for sparse keymaps Input: fix memory leak in force feedback core Input: wistron - remove identification strings from DMI table Input: psmouse - remove identification strings from DMI tables Input: atkbd - remove identification strings from DMI table Input: i8042 - remove identification strings from DMI tables DMI: allow omitting ident strings in DMI tables Input: psmouse - do not carry DMI data around Input: matrix-keypad - switch to using dev_pm_ops Input: keyboard - fix lack of locking when traversing handler->h_list Input: gpio_keys - scan gpio state at probe and resume time Input: keyboard - add locking around event handling Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller Input: xpad - add two new Xbox 360 devices Input: polled device - do not start polling if interval is zero Input: polled device - schedule first poll immediately Input: add S3C24XX touchscreen driver ...
2009-12-05Merge branch 'devel-stable' into develRussell King
2009-12-05Merge branches 'at91', 'ep93xx', 'etm', 'ks8695', 'nuc', 'u300' and 'u8500' ↵Russell King
into devel
2009-12-02Merge commit 'v2.6.32' into nextDmitry Torokhov
2009-11-20AT91: add touchscreen support for at91sam9g45ekesNicolas Ferre
New at91sam9g45ekes board provides a LCD with resistive touchscreen. This is the support of this feature by atmel_tsadcc driver. This also sets up platform parameters to be passed to the driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-20AT91: add platform parameters for atmel_tsadcc in at91sam9rlekNicolas Ferre
Setup platform parameters in at91sam9rl-ek board to be passed to atmel_tsadcc touchscreen. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-16at91: at91sam9g20ek modify dual slot evaluation kitNicolas Ferre
at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the previous dual slot board definition to match the official rev. C board. It also allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one. Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC slot A. This lead to a modification of those definitions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-16atmel_lcdfb Kconfig: remove long dependency lineNicolas Ferre
Many Atmel SOC are embedding a LCD controller. This patch removes the long dependency line for this Atmel LCD framebuffer driver configuration entry. The HAVE_FB_ATMEL configuration option is located in the video Kconfig file as it may be setup by ARM/AT91 and AVR32 chips. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-16at91: Kconfig simplificationJean-Christophe PLAGNIOL-VILLARD
Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-16at91: remove not needed depends onJean-Christophe PLAGNIOL-VILLARD
Those "depends on" are a double check as all machine entries are surrounded by "if <ARCH_xxx>" conditions. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-16at91: at91sam9g20ek modify dual slot evaluation kitNicolas Ferre
at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the previous dual slot board definition to match the official rev. C board. It also allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one. Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC slot A. This lead to a modification of those definitions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-10ARM: 5782/1: at91: support for eco920Uwe Kleine-König
CONFIG_MACH_ECO920 is enabled in at91rm9200dk_defconfig. The name is wrong, but this is better than adding another defconfig or don't get compile coverage at all. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-10ARM: 5778/1: AT91: Add cpuidle supportAlbin Tonnerre
This patch adds the support for cpuidle on AT91 SoCs, taken from the cpuidle support in mach-kirkwood. cpuidle needs sdram_selfrefresh_enable and _disable, so move their definition to a separate header file instead of duplicating the code already used in pm.c. Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-03at91: at91sam9g45 family: identify several chip versionsNicolas Ferre
cpu_is_xxx() macros are identifying generic at91sam9g45 chip. This patch adds the capacity to differentiate Engineering Samples and final lots through the inclusion of at91_cpu_fully_identify() and the related chip IDs with chip version field preserved. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2009-10-25ARM: 5726/1: at91/USB: at91sam9g45 series USB host integrationNicolas Ferre
This is the at91 specific part of USB host integration. The EHCI high speed controller has a companion OHCI controller to manage USB full and low speed. They are sharing the same IRQ line and vbus pin. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-21ARM: 5766/1: Fix watchdog enabling for AT91SAM9G45Yegor Yefremov
The macro for the watchdog has been changed from CONFIG_AT91SAM9_WATCHDOG to CONFIG_AT91SAM9X_WATCHDOG due to AT91CAP9 chips support Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits) genetlink: fix netns vs. netlink table locking (2) 3c59x: Get rid of "Trying to free already-free IRQ" tunnel: eliminate recursion field ems_pci: fix size of CAN controllers BAR mapping for CPC-PCI v2 net: fix htmldocs sunrpc, clnt.c Phonet: error on broadcast sending (unimplemented) Phonet: fix race for port number in concurrent bind() pktgen: better scheduler friendliness pktgen: T_TERMINATE flag is unused ipv4: check optlen for IP_MULTICAST_IF option ath9k: Initialize txgain and rxgain for newer AR9287 chipsets. iwlagn: fix panic in iwl{5000,4965}_rx_reply_tx ath9k: Fix RFKILL bugs drivers/net/wireless: Use usb_endpoint_dir_out cfg80211: don't overwrite privacy setting wl12xx: fix kconfig/link errors rt2x00: fix the definition of rt2x00crypto_rx_insert_iv iwlwifi: reduce noise when skb allocation fails iwlwifi: do not send sync command while holding spinlock mac80211: fix DTIM setting ...
2009-09-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/cpc-usb/TODO drivers/staging/cpc-usb/cpc-usb_drv.c drivers/staging/cpc-usb/cpc.h drivers/staging/cpc-usb/cpc_int.h drivers/staging/cpc-usb/cpcusb.h
2009-09-24Merge branch 'origin' into for-linusRussell King
Conflicts: MAINTAINERS
2009-09-23AT91: atmel-mci: Platform configuration to the the atmel-mci driverRob Emanuele
Created a modified version of the at91sam9g20 evaluation kit platform (board-sam9g20ek-2slot-mmc.c) and device support to make use of the updated atmel-mci driver. As the use of two slots modify GPIO pin allocation, we create another board file. This requires getting the most updated arch/arm/tools/mach-types from http://www.arm.linux.org.uk/developer/machines/download.php to have the machine type for the at91sam9g20ek-2slot-mmc board. [nicolas.ferre@atmel.com: printk, slot_count modification in at91sam9260_devices.c file] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Rob Emanuele <rob@emanuele.us> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22at91sam9263ek: activate at91 CAN controllerMarc Kleine-Budde
This patch activates the at91 CAN controller for the at91sam9263ek development board. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22at91sam9263: add at91_can device to generic device definitionMarc Kleine-Budde
This patch adds the device definition for the at91_can device to the generic device definiton file for the at91sam9263. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22Merge branch 'master' into for-linusRussell King
2009-09-22ARM: 5719/1: [AT91] Fix AC97 breakageAndrew Victor
Fix AC97 build breakage with converting to the shared AT91/AVR32 AC97 driver: struct atmel_ac97_data -> struct ac97c_platform_data CONFIG_SND_AT91_AC97 -> CONFIG_SND_ATMEL_AC97C Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-21ARM: 5710/1: at91: add AC97 support to at91sam9rl and at91sam9rlek boardNicolas Ferre
Add the support of AC97 on the at91sam9rl chip and -ek board. It will share the code with AVR32 ac97c alsa driver "atmel_ac97c". Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-21ARM: 5709/1: at91: add AC97 support to at91sam9g45 series and ↵Nicolas Ferre
at91sam9m10g45ek board Add the support of AC97 on the at91sam9g45 chip series and -ek board. It will share the code with AVR32 ac97c alsa driver "atmel_ac97c". Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-21ARM: 5621/1: at91/dmaengine: integration of at_hdmac driver in at91sam9g45 ↵Nicolas Ferre
series This is the integration of DMA engine driver into at91sam9g45 series device file. The associated driver is at_hdmac. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-21ARM: 5620/1: at91/dmaengine: integration of at_hdmac driver in at91sam9rlNicolas Ferre
This is the integration of DMA engine driver into at91sam9rl device file. The associated driver is at_hdmac. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-21trivial: fix typos in comments s/DGBU/DBGU/Samuel R. C. Vale
DBGU means Debug Unit, was refered as "DGBU" in some files. Fixed to "DBGU". Signed-off-by: Samuel R. C. Vale <srcvale@holoscopio.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-12Merge branch 'devel-stable' into develRussell King
Conflicts: MAINTAINERS arch/arm/mm/fault.c
2009-09-12Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and ↵Russell King
'w90x900' into devel
2009-09-06ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek boardNicolas Ferre
Board code was wrongly setting up the reset pin for AC97 on at91sam9263ek. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-06ARM: 5640/1: This patch modifies the support of AC97 on the at91sam9263 ek boardsedji gaouaou
This patch modifies the support of AC97 on the at91sam9263 ek board, so it would share the code with AVR32. Plus it removes a typo in at91sam9263_devices.c. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-01ARM: 5632/1: Board-specific data for IDE support on afeb9260Sergey Matyukevich
This patch adds board-specific data for IDE support on afeb9260. Depends on #5631/1 Tested-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-01ARM: 5631/1: Platform data for CF/IDE support in AT91SAM9260Sergey Matyukevich
This patch adds platform data for CF/IDE support and SMC init code for AT91SAM9260 SoC. Tested-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: at_hdmac: add DMA slave transfers dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller dmaengine: dmatest: correct thread_count while using multiple thread per channel dmaengine: dmatest: add a maximum number of test iterations drivers/dma: Remove unnecessary semicolons drivers/dma/fsldma.c: Remove unnecessary semicolons dmaengine: move HIGHMEM64G restriction to ASYNC_TX_DMA fsldma: do not clear bandwidth control bits on the 83xx controller fsldma: enable external start for the 83xx controller fsldma: use PCI Read Multiple command
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 12:56:02 +0000