summaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91/include
AgeCommit message (Collapse)Author
2013-06-26ARM: at91/PMC: fix at91sam9n12 USB FS initNicolas Ferre
at91sam9n12 has Full-speed only USB. So we should add it to the list in at91_pllb_usbfs_clock_init() function. Moreover, at91sam9n12 has an unusual PMC in the sense that it has a PLLB but also has a USB clock register. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Bo Shen <voice.shen@atmel.com>
2013-05-24ARM: at91/sama5: fix incorrect PMC pcr div definitionJosh Wu
Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-07Merge tag 'cleanup-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These are cleanups and smaller changes that either depend on earlier feature branches or came in late during the development cycle. We normally try to get all cleanups early, so these are the exceptions: - A follow-up on the clocksource reworks, hopefully the last time we need to merge clocksource subsystem changes through arm-soc. A first set of patches was part of the original 3.10 arm-soc cleanup series because of interdependencies with timer drivers now moved out of arch/arm. - Migrating the SPEAr13xx platform away from using auxdata for DMA channel descriptions towards using information in device tree, based on the earlier SPEAr multiplatform series - A few follow-ups on the Atmel SAMA5 support and other changes for Atmel at91 based on the larger at91 reworks. - Moving the armada irqchip implementation to drivers/irqchip - Several OMAP cleanups following up on the larger series already merged in 3.10." * tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a ARM: SPEAr: conditionalize SMP code ARM: arch_timer: Silence debug preempt warnings ARM: OMAP: remove unused variable serial: amba-pl011: fix !CONFIG_DMA_ENGINE case ata: arasan: remove the need for platform_data ARM: at91/sama5d34ek.dts: remove not needed compatibility string ARM: at91: dts: add MCI DMA support ARM: at91: dts: add i2c dma support ARM: at91: dts: set #dma-cells to the correct value ARM: at91: suspend both memory controllers on at91sam9263 irqchip: armada-370-xp: slightly cleanup irq controller driver irqchip: armada-370-xp: move IRQ handler to avoid forward declaration irqchip: move IRQ driver for Armada 370/XP ARM: mvebu: move L2 cache initialization in init_early() devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ...
2013-05-02Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "This branch contains part 1 of the platform updates for 3.10. Among the highlights: - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3) - New support for CSR SiRFatlas6 SoCs - A handful of updates for NVidia T114 (a.k.a. Tegra 4) - A bunch of updates for the shmobile platforms - A handful of updates for davinci - A few updates for Qualcomm MSM - Plus a handful of other patches, defconfig updates, etc." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits) ARM: tegra: pm: fix build error w/o PM_SLEEP ARM: davinci: ensure global variables are declared ARM: davinci: sram.c: fix incorrect type in assignment ARM: davinci: da8xx dt: make file local symbols static ARM: davinci: da8xx: add remoteproc support ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries ARM: socfpga: Add clock entries into device tree ARM: socfpga: Enable soft reset ARM: EXYNOS: replace cpumask by the corresponding macro ARM: EXYNOS: handle properly the return values ARM: EXYNOS: factor out the idle states ARM: OMAP4: Enable fix for Cortex-A9 erratas ARM: OMAP2+: Export SoC information to userspace ARM: OMAP2+: SoC name and revision unification ARM: OMAP2+: Move common part of late init into common function ARM: tegra: pm: remove duplicated include from pm.c ARM: davinci: da850: override mmc DT node device name ARM: davinci: da850: add mmc DT entries mmc: davinci_mmc: add DT support ARM: SAMSUNG: check processor type before cache restoration in resume ...
2013-04-19Merge tag 'at91-soc' of git://github.com/at91linux/linux-at91 into late/cleanupOlof Johansson
From Nicolas Ferre: Little modification in SoC presentation in kernel log. Removing of a long-standing warning in sam9263 PM code. * tag 'at91-soc' of git://github.com/at91linux/linux-at91: ARM: at91: suspend both memory controllers on at91sam9263 ARM: at91: change "Unknown" qualifier SoC subtype handling Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-19Merge branch 'at91/soc' into late/cleanupOlof Johansson
* at91/soc: ARM: at91: add defconfig for SAMA5 ARM: at91: dt: add device tree files for SAMA5D3 family ARM: at91: introduce SAMA5 support ARM: at91: introduce the core type choice to split ARMv4/5 and ARMv7 arch ARM: at91: add AT91_SAM9_TIME entry to select at91sam926x_time.c compilation ARM: at91: change name template in AT91_SOC_START macro ARM: at91: renamme rm9200 dt file ARM: at91: rename board-dt to more specific name board-dt-sam9 ARM: at91: move non DT Kconfig to Kconfig.non_dt
2013-04-09Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into ↵Arnd Bergmann
next/cleanup From Nicolas Ferre <nicolas.ferre@atmel.com>: Trivial typos and some macros removal & modification * tag 'at91-cleanup' of git://github.com/at91linux/linux-at91: ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: at91: remove unused dbgu_readl() macro Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09ARM: at91: change "Unknown" qualifier SoC subtype handlingNicolas Ferre
An AT91 SoC that doesn't have a subtype is shown as "Unknown" in the Linux log message which is not correct. This was leading to confusion so, add a "none" qualifier to the subtype property and set this one in the appropriate cases. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-08ARM: at91: remove trailing semicolon from macrosJohan Hovold
Remove trailing semicolon from register-access macros. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-03ARM: at91: remove unused dbgu_readl() macroNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-02Merge branch 'lpc32xx/defconfig' of git://git.antcom.de/linux-2.6 into next/socOlof Johansson
* 'lpc32xx/defconfig' of git://git.antcom.de/linux-2.6: (604 commits) ARM: LPC32xx: defconfig update: Cleanup (EXPERIMENTAL) ARM: LPC32xx: defconfig update: Remove the museum NAND option ARM: LPC32xx: defconfig update: Default drivers and cleanup ARM: LPC32xx: defconfig update: gpio and keys + Linux 3.9-rc4 Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/Kconfig
2013-03-26ARM: at91: introduce SAMA5 supportLudovic Desroches
This patch introduces the SAMA5 support and a generic board file for SAMA5 devices. It also updates the PMC driver to manage clock division which is a requirement since some peripherals can't work at the bus frequency on SAMA5. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-14ARM: at91: add gpio suspend/resume support when using pinctrlLudovic Desroches
gpio suspend/resume and wakeup sources where not managed when using pinctrl so it was impossible to wake up the system with a gpio. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-11ARM: remove unused arch_decomp_wdog()Shawn Guo
With ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c, all the arch_decomp_wdog() definition at platform level is unneeded. Remmove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: 1) Allow to dump, monitor, and change the bridge multicast database using netlink. From Cong Wang. 2) RFC 5961 TCP blind data injection attack mitigation, from Eric Dumazet. 3) Networking user namespace support from Eric W. Biederman. 4) tuntap/virtio-net multiqueue support by Jason Wang. 5) Support for checksum offload of encapsulated packets (basically, tunneled traffic can still be checksummed by HW). From Joseph Gasparakis. 6) Allow BPF filter access to VLAN tags, from Eric Dumazet and Daniel Borkmann. 7) Bridge port parameters over netlink and BPDU blocking support from Stephen Hemminger. 8) Improve data access patterns during inet socket demux by rearranging socket layout, from Eric Dumazet. 9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and Jon Maloy. 10) Update TCP socket hash sizing to be more in line with current day realities. The existing heurstics were choosen a decade ago. From Eric Dumazet. 11) Fix races, queue bloat, and excessive wakeups in ATM and associated drivers, from Krzysztof Mazur and David Woodhouse. 12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions in VXLAN driver, from David Stevens. 13) Add "oops_only" mode to netconsole, from Amerigo Wang. 14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also allow DCB netlink to work on namespaces other than the initial namespace. From John Fastabend. 15) Support PTP in the Tigon3 driver, from Matt Carlson. 16) tun/vhost zero copy fixes and improvements, plus turn it on by default, from Michael S. Tsirkin. 17) Support per-association statistics in SCTP, from Michele Baldessari. And many, many, driver updates, cleanups, and improvements. Too numerous to mention individually. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) net/mlx4_en: Add support for destination MAC in steering rules net/mlx4_en: Use generic etherdevice.h functions. net: ethtool: Add destination MAC address to flow steering API bridge: add support of adding and deleting mdb entries bridge: notify mdb changes via netlink ndisc: Unexport ndisc_{build,send}_skb(). uapi: add missing netconf.h to export list pkt_sched: avoid requeues if possible solos-pci: fix double-free of TX skb in DMA mode bnx2: Fix accidental reversions. bna: Driver Version Updated to 3.1.2.1 bna: Firmware update bna: Add RX State bna: Rx Page Based Allocation bna: TX Intr Coalescing Fix bna: Tx and Rx Optimizations bna: Code Cleanup and Enhancements ath9k: check pdata variable before dereferencing it ath5k: RX timestamp is reported at end of frame ath9k_htc: RX timestamp is reported at end of frame ...
2012-12-12Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
2012-11-19atmel: move ATMEL_MAX_UART to platform_data/atmel.hJean-Christophe PLAGNIOL-VILLARD
Modify both AT91 and AVR32 platforms. Use 7 for it as the sam9260 or the sam9g25 have 7 of them DBGU included. Reported-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-16ARM: at91/atmel-mci: remove unused setup_dma_addr() macroNicolas Ferre
This macro is not used anymove in atmel-mci driver. It has been removed by a patch that was dealing with dw_dmac.c e2b35f3: (dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes) We are now using the dmaengine API to specify the slave DMA parameters: dmaengine_slave_config(). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org>
2012-11-06arm: at91: move at91rm9200 rtc header in drivers/rtcJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06arm: at91: move reset controller header to arm/arm/mach-at91Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06arm: at91: move pit define to the driverJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06arm: at91: move at91_shdwc.h to arch/arm/mach-at91Jean-Christophe PLAGNIOL-VILLARD
This is only used by old boards style or via core code. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06arm: at91: move board header to arch/arm/mach-at91Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06arn: at91: move at91_tc.h to arch/arm/mach-at91Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06arm: at91 move at91_aic.h to arch/arm/mach-at91Jean-Christophe PLAGNIOL-VILLARD
as this is only used board old style board old mach code Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06arm: at91 move board.h to arch/arm/mach-at91Jean-Christophe PLAGNIOL-VILLARD
as this is only used board old style board Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06arm: at91: move platfarm_data to include/linux/platform_data/atmel.hJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-10-19ARM: AT91: remove old RM9200 EMAC register definitionsJoachim Eastwood
This file is unused after at91_ether was converted to use macb.h Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-11Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds
Pull i2c-embedded changes from Wolfram Sang: "The changes for i2c-embedded include: - massive rework of the omap driver - massive rework of the at91 driver. In fact, the old driver gets removed; I am okay with this approach since the old driver was depending on BROKEN and its limitations made it practically unusable, so people used bitbanging instead. But even if there are users, there is no platform_data or module parameter which would need to be converted. It is just another driver doing I2C transfers, just way better. Modifications of arch/arm/at91 related files have proper acks from the maintainer. - new driver for R-Car I2C - devicetree and generic_clock conversions and fixes - usual driver fixes and changes. The rework patches have come a long way and lots of people have been involved in creating/testing them. Most patches have been in linux-next at least since 3.6-rc5. A few have been added in the last week, I have to admit. An unexpected (but welcome :)) peak in private life is the cause for that. The "late" patches shouldn't cause any merge conflicts and I will have a special eye on them during the stabilization phase. This is an exception and I want to have the patches in place properly in time again for the next kernels." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits) MXS: Implement DMA support into mxs-i2c i2c: add Renesas R-Car I2C driver i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints i2c: nomadik: Add Device Tree support to the Nomadik I2C driver i2c: algo: pca: Fix chip reset function for PCA9665 i2c: mpc: Wait for STOP to hit the bus i2c: davinci: preparation for switch to common clock framework omap-i2c: fix incorrect log message when using a device tree i2c: omap: sanitize exit path i2c: omap: switch over to autosuspend API i2c: omap: remove unnecessary pm_runtime_suspended check i2c: omap: switch to threaded IRQ support i2c: omap: remove redundant status read i2c: omap: get rid of the "complete" label i2c: omap: resize fifos before each message i2c: omap: simplify IRQ exit path i2c: omap: always return IRQ_HANDLED i2c: omap: simplify errata check i2c: omap: bus: add a receiver flag ...
2012-10-01Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-01Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
2012-09-18ARM: at91: use __iomem pointers for MMIOArnd Bergmann
ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-14ARM: at91: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the at91 include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Dan Williams <djbw@fb.com>
2012-09-12i2c: at91: remove old polling driverNikolaus Voss
It will get replaced by a superior one. Safe to remove since this one depends on BROKEN anyhow. Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com> [wsa: added commit message] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-08-13Merge branch 'for-arm-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds into next/drivers From Bryan Wu <bryan.wu@canonical.com>: Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a new generic led trigger for CPU not only for ARM but also for others. For enabling CPU idle event, CPU arch code should call ledtrig_cpu() stub to trigger idle start or idle end event. These patches convert old style LED driver in arch/arm to gpio_led or new led driver interface. Against 3.5 release and build successfully for all the machines. Test ledtrig-cpu driver on OMAP4 Panda board. v9 --> v10 * fix compiling issue on versatile_defconfig reported by Russell King * rebase to 3.5 kernel and move patches to new git tree v8 --> v9: * use mutex to replace rw_sema pointed out by Tim Gardner * add a new struct led_trigger_cpu * add lock_is_inited to record mutex lock initialization v6 --> v7: * add a patch to unify the led-trigger name * fix some typo pointed * use BUG_ON to detect CPU numbers during building stage v5 --> v6: * replace __get_cpu_var() to per_cpu() * remove smp_processor_id() which is wrong with for_each_possible_cpu() * test on real OMAP4 Panda board * add comments about CPU hotplug in the CPU LED trigger driver v4 --> v5: * rebase all the patches on top of latest linux-next * replace on_each_cpu() with for_each_possible_cpu() * add some description of ledtrig_cpu() API * remove old leds code from driver nwflash.c, which should use a new led trigger then * this trigger driver can be built as module now v3 --> v4: * fix a typo pointed by Jochen Friedrich * fix some building errors * add Reviewed-by and Tested-by into patch log v2 --> v3: * almost rewrote the whole ledtrig-cpu driver, which is more simple * every CPU will have a per-CPU trigger * cpu trigger can be assigned to any leds * fix a lockdep issue in led-trigger common code * other fix according to review v1 --> v2: * remove select operations in Kconfig of every machines * add back supporting of led in core module of mach-integrator * solidate name scheme in ledtrig-cpu.c * add comments of CPU_LED_* cpu led events * fold patches of RealView and Versatile together * add machine_is_ check during assabet led driver init * add some Acked-by in patch logs * remove code for simpad machine in machine-sa11000, since Jochen Friedrich introduced gpiolib and gpio-led driver for simpad * on Assabet and Netwinder machine, LED operations is reversed like: setting bit means turn off leds clearing bit means turn on leds * add a new function to read CM_CTRL register for led driver * 'for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: ARM: use new LEDS CPU trigger stub to replace old one ARM: mach-sa1100: retire custom LED code ARM: mach-omap1: retire custom LED code ARM: mach-pnx4008: remove including old leds event API header file ARM: plat-samsung: remove including old leds event API header file ARM: mach-pxa: retire custom LED code char: nwflash: remove old led event code ARM: mach-footbridge: retire custom LED code ARM: mach-ebsa110: retire custom LED code ARM: mach-clps711x: retire custom LED code of P720T machine ARM: mach-integrator: retire custom LED code ARM: mach-integrator: move CM_CTRL to header file for accessing by other functions ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger ARM: mach-shark: retire custom LED code ARM: mach-ks8695: remove leds driver, since nobody use it ARM: mach-realview and mach-versatile: retire custom LED code ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers led-triggers: create a trigger for CPU activity Conflicts: arch/arm/mach-clps711x/p720t.c arch/arm/mach-sa1100/leds-cerf.c arch/arm/mach-sa1100/leds-lart.c Let's hope this is the last time we pull this and it doesn't cause more trouble. I have verified that version 10 causes no build warnings or errors any more, and the patches still look good. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-31ARM: at91: convert old leds drivers to gpio_led and led_trigger driversBryan Wu
Build with at91 defconfigs successfully Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto updates from Herbert Xu: - Fixed algorithm construction hang when self-test fails. - Added SHA variants to talitos AEAD list. - New driver for Exynos random number generator. - Performance enhancements for arc4. - Added hwrng support to caam. - Added ahash support to caam. - Fixed bad kfree in aesni-intel. - Allow aesni-intel in FIPS mode. - Added atmel driver with support for AES/3DES/SHA. - Bug fixes for mv_cesa. - CRC hardware driver for BF60x family processors. * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (66 commits) crypto: twofish-avx - remove useless instruction crypto: testmgr - add aead cbc aes hmac sha1,256,512 test vectors crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms crypto: talitos - export the talitos_submit function crypto: talitos - move talitos structures to header file crypto: atmel - add new tests to tcrypt crypto: atmel - add Atmel SHA1/SHA256 driver crypto: atmel - add Atmel DES/TDES driver crypto: atmel - add Atmel AES driver ARM: AT91SAM9G45: add crypto peripherals crypto: testmgr - allow aesni-intel and ghash_clmulni-intel in fips mode hwrng: exynos - Add support for Exynos random number generator crypto: aesni-intel - fix wrong kfree pointer crypto: caam - ERA retrieval and printing for SEC device crypto: caam - Using alloc_coherent for caam job rings crypto: algapi - Fix hang on crypto allocation crypto: arc4 - now arc needs blockcipher support crypto: caam - one tasklet per job ring crypto: caam - consolidate memory barriers from job ring en/dequeue crypto: caam - only query h/w in job ring dequeue path ...
2012-07-11ARM: AT91SAM9G45: add crypto peripheralsNicolas Royer
Signed-off-by: Nicolas Royer <nicolas@eukrea.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Eric Bénard <eric@eukrea.com> Tested-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-02ARM: at91: add AIC5 supportLudovic Desroches
The number of lines of AIC5 has increased from 32 to 128. Due to this increase, a source select register has been introduced for the interrupt line selection. Moreover, register mapping has been changed. For that reasons, we need some dedicated callbacks for AIC5. Power management is also concerned by these changes. On suspend, we can't get the whole interrupt mask register as before, we have to read this register 128 times. To reduce this overhead, a snapshot of the whole IMR is maintained. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-02ARM: at91: remove mach/irqs.hLudovic Desroches
mach/irqs only defines FIQ_START which doesn't appear to be used anywhere so remove it. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-02ARM: at91: sparse irq supportLudovic Desroches
Enable sparse irq support for multisoc image. It involves to add the NR_IRQS_LEGACY offset to static SoC irq number definitions since NR_IRQS_LEGACY irq descs are allocated before AIC requests irq descs allocation. Move NR_AIC_IRQS macro to a more appropiate place with the purpose to remove mach/irqs.h later. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-02ARM: at91: at91 based machines specify their own irq handler at run timeLudovic Desroches
SOC_AT91SAM9 selects MULTI_IRQ_HANDLER in order to let machines specify their own IRQ handler at run time. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-02ARM: at91: add of irq priorities supportLudovic Desroches
Add a third cell to define irq priority. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-02ARM: at91: aic can use fast eoi handler typeLudovic Desroches
The Advanced Interrupt Controller allows us to use the fast EOI handler type. It lets us remove the Atmel specific workaround into arch/arm/kernel/irq.c used to indicate to the AIC the end of the interrupt treatment. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-07-02ARM: at91: fix at91_aic_write macroLudovic Desroches
Fix at91_aic_write macro to avoid potential issues. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-02ARM: at91: remove two unused headersPaul Bolle
Commit 82c583e3ae31ffa76d1280197274cc1e1cde3179 ("AT91RM9200 hardware headers") introduced arch/arm/mach-at91/include/mach/at91_spi.h and arch/arm/mach-at91/include/mach/at91_ssc.h. (These files were called at91rm9200_spi.h and at91rm9200_ssc.h then.) That commit was added in the v2.6.18 development cycle. Nothing includes them now and nothing uses the named constants they provide. (There's no way these named constants could be used unless these files were included somehow.) It actually seems these two headers have never been used since they were added to the tree. They can safely be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-05-25Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "Nothing exciting this time, odd fixes in a bunch of drivers" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_hdmac: take maxburst from slave configuration dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constant dmaengine: at_hdmac: remove some at_dma_slave comments dma: imx-sdma: make channel0 operations atomic dmaengine: Fixup dmaengine_prep_slave_single() to be actually useful dmaengine: Use dma_sg_len(sg) instead of sg->length dmaengine: Use sg_dma_address instead of sg_phys DMA: PL330: Remove duplicate header file inclusion dma: imx-sdma: keep the callbacks invoked in the tasklet dmaengine: dw_dma: add Device Tree probing capability dmaengine: dw_dmac: Add clk_{un}prepare() support dma/amba-pl08x: add support for the Nomadik variant dma/amba-pl08x: check for terminal count status only
2012-05-22Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull support for new arm SoCs from Olof Johansson: "Three new system-on-chip models are supported: the st-ericsson u9540 in ux500, the sam9n12 in at91 and the emma ev2 in shmobile. Emma is a little bit special because it is completely unrelated to the classic shmobile models, but the new Renesas rmobile SoCs are a combination of things from both Emma and shmobile, so it was decided to have them all live in one directory. This also contains updates to existing shmobile soc code as well as some related board changes due to dependencies." * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) mach-shmobile: Use DT_MACHINE for KZM9D V3 mach-shmobile: Emma Mobile EV2 DT support V3 mach-shmobile: KZM9D board Ethernet support V3 mach-shmobile: Emma Mobile EV2 GPIO support V3 mach-shmobile: Emma Mobile EV2 SMP support V3 mach-shmobile: KZM9D board support V3 mach-shmobile: Emma Mobile EV2 SoC base support V3 gpio: Emma Mobile GPIO driver V2 ARM: mach-shmobile: sh73a0: fixup PINT/IRQ16-IRQ31 irq number conflict ARM: mach-shmobile: clock-r8a7740: use followparent_recalc on usb24s ARM: mach-shmobile: clock-r8a7740: add MMCIF clock ARM: mach-shmobile: clock-r8a7740: add SDHI clock ARM: mach-shmobile: clock-r8a7740: add USB clock ARM: mach-shmobile: clock-r8a7740: add FSI clock ARM: mach-shmobile: r8a7740: cleanup I2C workaround method ARM: mach-shmobile: r8a7740: add gpio_irq support ARM: mach-shmobile: sh7372: Add FSI DMAEngine support ARM / mach-shmobile: Use preset_lpj with calibrate_delay() ARM: ux500: ioremap differences for DB9540 ARM: ux500: core U9540 support ...
2012-05-22Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull first batch of arm-soc cleanups from Olof Johansson: "These cleanups are basically all over the place. The idea is to collect changes with minimal impact but large number of changes so we can avoid them from distracting in the diffstat in the other series. A significant number of lines get removed here, in particular because the ixp2000 and ixp23xx platforms get removed. These have never been extremely popular and have fallen into disuse over time with no active maintainer taking care of them. The u5500 soc never made it into a product, so we are removing it from the ux500 platform. Many good cleanups also went into the at91 and omap platforms, as has been the case for a number of releases." Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx} * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits) ARM: clps711x: Cleanup IRQ handling ARM clps711x: Removed unused header mach/time.h ARM: clps711x: Added note about support EP731x CPU to Kconfig ARM: clps711x: Added missing register definitions ARM: clps711x: Used own subarch directory for store header file Dove: Fix Section mismatch warnings ARM: orion5x: ts78xx debugging changes ARM: orion5x: remove PM dependency from ts78xx ARM: orion5x: ts78xx fix NAND resource off by one ARM: orion5x: ts78xx whitespace cleanups Orion5x: Fix Section mismatch warnings Orion5x: Fix warning: struct pci_dev declared inside paramter list ARM: clps711x: Combine header files into one for clps711x-targets ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c ARM: S3C24XX: Use common macro to define resources on mach-osiris.c ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c ARM: S5PV210: Use common macro to define resources on dev-audio.c ARM: S5PC100: Use common macro to define resources on dev-audio.c ARM: S5P64X0: Use common macro to define resources on dev-audio.c ...
2012-05-15dmaengine: at_hdmac: take maxburst from slave configurationNicolas Ferre
The maxburst/chunk size was taken from the private slave DMA data structure. Use the common API provided by DMA_SLAVE_CONFIG to setup src/dst maxburst values. The ctrla field is not needed anymore in the slave private structure nor the header constants that were located in an architecture specific directory. The at91sam9g45_devices.c file that was using this platform data is also modified to remove this now useless data. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>