summaryrefslogtreecommitdiff
path: root/arch/arm/configs
AgeCommit message (Collapse)Author
2009-09-23omapfb: add support for the ZOOM MDK LCDStanley.Miao
Add glue to control the OMAP_LDP LCD as a frame buffer device using the existing dispc.c driver under omapfb. Patch updated for mainline kernel. Note that the drivers/video/omap should be updated to pass omap_lcd_config in platform_data. The patch should also be updated to compile if twl4030 is not selected, and eventually to use the regulator framework. Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com> Fixed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23omapfb: add support for the OMAP3 Beagle DVI outputKoen Kooi
The default resolution is 1024x768@24bit This version addresses the comments from Felipe Balbi adn Arun Edarath Fixed-by: Felipe Contreras <felipe.contreras@gmail.com> Fixed-by: Steve Sakoman <steve@sakoman.com> Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com> Fixed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Koen Kooi <koen@openembedded.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23omapfb: add support for the 3430SDP LCDKevin Hilman
The 3430SDP uses the same panel as the 2430SDP. The main difference are in the GPIO lines used for panel enable and backlight, and the VAUX register/commands sent to the TWL4030 power subsystem. Also, some misc. whitespace cleanups. Fixed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@mvsita.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-18Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (62 commits) DaVinci: DM646x - platform changes for vpif capture and display drivers davinci: DM355 - platform changes for vpfe capture davinci: DM644x platform changes for vpfe capture davinci: audio: move tlv320aic33 i2c setup into board files DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs DaVinci: DM365: Adding entries for DM365 IRQ's DaVinci: DM355: Adding PINMUX entries for DM355 Display davinci: Handle pinmux conflict between mmc/sd and nor flash davinci: Add NOR flash support for da850/omap-l138 davinci: Add NAND flash support for DA850/OMAP-L138 davinci: Add MMC/SD support for da850/omap-l138 davinci: Add platform support for da850/omap-l138 GLCD davinci: Macro to convert GPIO signal to GPIO pin number davinci: Audio support for DA850/OMAP-L138 EVM davinci: Audio support for DA830 EVM davinci: Correct the number of GPIO pins for da850/omap-l138 davinci: Configure MDIO pins for EMAC DaVinci: DM365: Add Support for new Revision of silicon DaVinci: DM365: Fix Compilation issue due to PINMUX entry DaVinci: EDMA: Updating default queue handling ...
2009-09-18Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits) OMAP clock: use debugfs_remove_recursive() for rewinding OMAP2/3/4 core: create omap_device layer OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects OMAP2/3/4: create omap_hwmod layer OMAP2/3 board-*.c files: read bootloader configuration earlier OMAP2/3/4 PRCM: add module IDLEST wait code OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm OMAP clock: associate MPU clocks with the mpu_clkdm OMAP3 clock: Fixed processing of bootarg 'mpurate' OMAP: SDRC: Add several new register definitions OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups. OMAP: PM: Added suspend target state control to debugfs for OMAP3 OMAP: PM debug: Add PRCM register dump support OMAP: PM debug: make powerdomains use PM-debug counters OMAP: PM: Add pm-debug counters OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each. OMAP: PM: Hook into PM counters OMAP: PM counter infrastructure. OMAP3: PM: fix lockdep warning caused by omap3_pm_init ...
2009-09-12Merge branch 'master' into develRussell King
2009-09-12Merge branch 'devel-stable' into develRussell King
Conflicts: MAINTAINERS arch/arm/mm/fault.c
2009-09-12Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and ↵Russell King
'w90x900' into devel
2009-09-12Merge branch 'nomadik' into devel-stableRussell King
2009-09-06ARM: 5689/1: Update default config of HP Jornada 700-series machinesKristoffer Ericson
This patch updates the default config for HP Jornada 700-series handhelds. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-28OMAP3: update OMAP3 Beagle defconfigPaul Walmsley
Update the OMAP3 Beagle defconfig to add EHCI, MMC, TWL4030 GPIO support. Beagle can again use MMC rootfs after this patch. Tested on BeagleBoard rev C2. Patch updated to enable PM and OTG options as suggested by Eric Witcher <ewitcher@mindspring.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jason Kridner <jkridner@beagleboard.org> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP3: Zoom2: Update board defconfigVikram Pandita
Update defconfig for Zoom2 to include TWL4030 core TWL4030 drivers (bci, gpio, keypad, usb, mmc) Also sync the defconfig after issuing a menuconfig Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP3: rx51_defconfig: add twl4030 to rx51 default configurationTimo Kokkonen
twl4030 watchdog will be compiled as a module by default. Signed-off-by: Atal Shargorodsky <ext-atal.shargorodsky@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP3: 3430SDP: Fix defconfigSergio Aguirre
This patch makes the SDP boot again with the defconfig. Changes done: - Removes other selected boards. - Sets the Low Level debug output for UART1. - Disables some paripherals from other boards. Tested on a SDP3430-VE5.1.0 (OMAP3430 ES3.1) Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP2: n8x0: add n8x0_defconfigKalle Valo
Add defconfig file for OMAP2 N800 and N810 devices. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-26davinci: Kconfig: add dm646x ASoC supportKevin Hilman
2009-08-26davinci: Kconfig: update default defconfigKevin Hilman
Updated default defconfig after da850 merge and 2.6.31-rc3 update. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: Add support for DA850/OMAP-L138 EVM boardSudhakar Rajashekhara
Add support for the DA850/OMAP-L138 Evaluation Module (EVM) from TI. The EVM has User Interface (UI) card which contains various devices. This UI card can be connected to the base board. Support for all the devices on the UI card and ones on the EVM will be added in subsequent patches. The EVM schematics are not available publicly yet; but should be available soon. A new defconfig for this board has been added mainly because the DA830/OMAP-L137 defconfig forces writethrough cache mode which is not required on DA850/OMAP-L138. This patch has been boot tested on DA850/OMAP-L138 EVM using ramdisk as filesystem. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: Kconfig: update default config for 2.6.31-rcKevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: da8xx: Add support for DA830/OMAP-L137 EVM boardMark A. Greer
Add support for the DA830/OMAP-L137 Evaluation Module (EVM) from TI. The EVM has User Interface (UI) and Audio cards that can be connected which contain various devices. Support for those devices and ones on the EVM will be added in subsequent patches. Additional generalizations for future SoCs in da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26davinci: Adding DM365 entries to Makefile/Kconfig/defconfigSandeep Paulraj
This patch does the following 1) Adds entries to davinci_all_defconfig for DM365 2) Adds entries to the Makefile for DM365 3) Adds entries for DM365 in the Kconfig Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-24[ARM] Kirkwood: enable eSATA on QNAP TS-219PJohn Holland
Initialize PCI/PCIe on the QNAP TS-119, TS-219 and TS-219P hardware allowing the use of the discrete eSATA controller connected to the PCIe bus in the TS-219P. Signed-off-by: John Holland <john.holland@cellent-fs.de> Tested-by: Thomas Reitmayr <treitmayr@devbase.at> Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-16ARM: S5PC100: Board and configuration fileByungho Min
SMDKC100 board support. The board can be obtained from meritech (http://www.meritech.co.kr) Signed-off-by: Byungho Min <bhmin@samsung.com> [ben-linux@fluff.org: fixup subject and description] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-15ARM: 5670/1: bcmring: add default configuration for bcmring archLeo Chen
add default configuration for bcmring arch Signed-off-by: Leo Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-10Merge branch 'omap-fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2009-08-10OMAP3: RX51: Updated rx51_defconfigRoger Quadros
Added REGULATOR, MMC and updated default CMDLINE so RX51 now boots. Note that the regulator code should be moved from mmc-twl4030.c to omap_hsmmc.c so it can be a module. Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-07USB: musb: fix the nop registration for OMAP3EVMGupta, Ajay Kumar
OMAP3EVM uses ISP1504 phy which doesn't require any programming and thus has to use NOP otg transceiver. Cleanups being done: - Remove unwanted code in usb-musb.c file - Register NOP in OMAP3EVM board file using usb_nop_xceiv_register(). - Select NOP_USB_XCEIV for OMAP3EVM boards. - Don't enable TWL4030_USB in omap3_evm_defconfig Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-30ARM: 5630/1: Add support for Eukrea's CPUAT91Eric Bénard
CPUAT91 is based on Atmel's AT91RM9200 with up to 16MB Strataflash, up to 128MB SDRAM and an ethernet PHY in RMII mode. Signed-off-by: Eric Benard <ebenard@eukrea.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30ARM: 5629/1: Add support for Eukrea's CPU9260 & CPU9G20Eric Bénard
CPU9260 and CPU9G20 share the same PCB populated with either Atmel's AT91SAM9260B or AT91SAM9G20B with up to 64MB Strataflash, up to 128MB SDRAM, up to 2GB NAND and an ethernet PHY in RMII mode. Signed-off-by: Eric Benard <eric@eukrea.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-28mx3 defconfig updateSascha Hauer
- enable PCM043, MX31LILLY, ARMADILLO5X0 and MX35_3DS boards - enable MXC nand driver - enable UBI support - disable cs89x0 support which broke all boards which do not have this chip Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-28mx27 defconfig updateSascha Hauer
- enable MX27_3DS and MX27LITE Board - enable MXC nand driver - enable UBI support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-17[ARM] 5608/1: Updated U300 defconfigLinus Walleij
Removed the LBD support that isn't of any use right now at least, then remove remnants of the TCM config flags that somehow crept in by mistake (not yet merged patch for 2.6.32) and then the usual defconfig noise from updated menus. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02[ARM] 5576/1: Update kb9202_defconfigMatthias Kaehlcke
The default configuration file for the KwikByte kb9202 board was based on a 2.6.13-rc2 kernel and doesn't produce a bootable kernel. Update the configuration in order to produce a bootable image. Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02[ARM] 5588/1: nomadik: add defconfig for nhk8815Alessandro Rubini
Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02[ARM] 5579/1: Updated U300 defconfigLinus Walleij
This defconfig update selects all the new U300 drivers merged for 2.6.31-rc1 in the merge window and add defaults for the new config options. It compiles and boots nicely from initramfs on the U300. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-23[ARM] s3c2410_defconfig: add MINI2440 machine to buildBen Dooks
Add the MINI2440 to the list of machines built by the central defconfig. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-23[ARM] S3C: Remove unused CONFIG_DEBUG_S3C_PORTBen Dooks
Remove the unused CONFIG_DEBUG_S3C_PORT as we currently only have support for using the S3C UARTs via the low-level debug code. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-15[ARM] MINI2440: Create a mini2440_defconfig fileMichel Pollet
Just a working, starting point config file for the board. Signed-off-by: Michel Pollet <buserror@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-14Merge branch 'u300' into develRussell King
Conflicts: arch/arm/Makefile Updates: arch/arm/mach-u300/core.c arch/arm/mach-u300/timer.c
2009-06-14Merge branch 'stmp' into develRussell King
2009-06-14Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-06-11Merge branch 'w90x900' into develRussell King
2009-06-11[ARM] 5550/1: Add default configure file for w90p910 platformwanzongshun
Add default configure file for w90p910 platform. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-10Merge branch 'ep93xx' into develRussell King
2009-06-10Merge branch 'for_rmk' of ↵Russell King
git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into devel
2009-06-09ARM: OMAP4: SMP: Update defconfig for OMAP4430Santosh Shilimkar
This patch updates omap_4430sdp_defconfig to add SMP and LOCAL_TIMER support for OMAP4430 SDP platform. Additionally the defconfig is made in sync with 2.6.30-rc7 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2009-06-08Merge branch 'for-rmk' of git://git.marvell.com/orion into develRussell King
2009-06-08[ARM] Kirkwood: add Marvell 88F6281 GTW GE board supportLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2009-06-08[ARM] Kirkwood: CPU idle driverRabeeh Khoury
The patch adds support for Kirkwood cpu idle. Two idle states are defined: 1. Wait-for-interrupt (replacing default kirkwood wfi) 2. Wait-for-interrupt and DDR self refresh Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-05[ARM] pxa/cm-x300: update defconfigMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 02:53:29 +0000