summaryrefslogtreecommitdiff
path: root/arch/arm/configs/imx_v4_v5_defconfig
AgeCommit message (Collapse)Author
2020-02-09ARM: configs: Cleanup old Kconfig optionsKrzysztof Kozlowski
CONFIG_MMC_BLOCK_BOUNCE is gone since commit c3dccb74be28 ("mmc: core: Delete bounce buffer Kconfig option"). CONFIG_LBDAF is gone since commit 72deb455b5ec ("block: remove CONFIG_LBDAF"). CONFIG_IOSCHED_DEADLINE and CONFIG_IOSCHED_CFQ are gone since commit f382fb0bcef4 ("block: remove legacy IO schedulers"). The IOSCHED_DEADLINE was replaced by MQ_IOSCHED_DEADLINE and it will be now enabled by default (along with MQ_IOSCHED_KYBER). The IOSCHED_BFQ seems to replace IOSCHED_CFQ so select it in configs previously choosing the latter. CONFIG_CROSS_COMPILE is gone since commit f1089c92da79 ("kbuild: remove CONFIG_CROSS_COMPILE support"). Link: https://lore.kernel.org/r/20200130195525.4525-2-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19ARM: configs: Remove useless UEVENT_HELPER_PATHKrzysztof Kozlowski
Remove the CONFIG_UEVENT_HELPER_PATH because: 1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was made default to 'n', 2. It is not recommended (help message: "This should not be used today [...] creates a high system load") and was kept only for ancient userland, 3. Certain userland specifically requests it to be disabled (systemd README: "Legacy hotplug slows down the system and confuses udev"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-05Merge tag 'nand/for-5.2' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: - Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: * Switch to ->exec-op(). - meson: * Misc cleanups and fixes. * New OOB layout. - Sunxi: * A23/A33 NAND DMA support. - Ingenic: * Full reorganization and cleanup. * Clear separation between NAND controller and ECC engine. * Support JZ4740 an JZ4725B. - Denali: * Clear controller/chip separation. * ->exec_op() migration. * Various cleanups. - fsl_elbc: * Enable software ECC support. - Atmel: * Sam9x60 support. - GPMI: * Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes.
2019-04-18mtd: rawnand: Clarify Kconfig entry MTD_NANDMiquel Raynal
MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-22ARM: imx_v4_v5_defconfig: enable PWM driverUwe Kleine-König
While there is no mainline board that makes use of the PWM still enable the driver for it to increase compile test coverage. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-05ARM: imx_v4_v5_defconfig: Remove unneeded optionsFabio Estevam
Remove the following unneeded config options: - CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS have been removed since commit a930d8bd94d8d ("usb: chipidea: Always build ULPI code") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-05ARM: imx_v4_v5_defconfig: Re-sync defconfigFabio Estevam
Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v4_v5_defconfig and only keep the options that were moved around. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-03ARM: imx_v4_v5_defconfig: Select ULPI supportFabio Estevam
Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that USB ULPI can be functional on some boards like that use ULPI interface. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-26ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driverFabio Estevam
fsl-asoc-card machine driver also supports sgtl5000, so use it favor of the imx-sgtl5000 machine driver, which will be probably be removed in the future. Tested on a imx25-pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-26ARM: imx_v4_v5_defconfig: Re-sync defconfigFabio Estevam
Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v4_v5_defconfig So keep it in sync to help further changes in defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-10ARM: defconfig: Cleanup from old Kconfig optionsKrzysztof Kozlowski
Remove old, dead Kconfig options (in order appearing in this commit): - EXPERIMENTAL is gone since v3.9; - INET_LRO: commit 7bbf3cae65b6 ("ipv4: Remove inet_lro library"); - MTD_CONCAT: commit f53fdebcc3e1 ("mtd: drop MTD_CONCAT from Kconfig entirely"); - MTD_PARTITIONS: commit 6a8a98b22b10 ("mtd: kill CONFIG_MTD_PARTITIONS"); - MTD_CHAR: commit 660685d9d1b4 ("mtd: merge mtdchar module with mtdcore"); - NETDEV_1000 and NETDEV_10000: commit f860b0522f65 ("drivers/net: Kconfig and Makefile cleanup"); NET_ETHERNET should be replaced with just ETHERNET but that is separate change; - INOTIFY: commit 2dfc1cae4c42 ("inotify: remove inotify in kernel interface"); - MISC_DEVICES: commit 7c5763b8453a ("drivers: misc: Remove MISC_DEVICES config option"); - HID_SUPPORT: commit 1f41a6a99476 ("HID: Fix the generic Kconfig options"); - BT_L2CAP and BT_SCO: commit f1e91e1640d8 ("Bluetooth: Always compile SCO and L2CAP in Bluetooth Core"); - DEBUG_ERRORS: commit b025a3f836d1 ("ARM: 6876/1: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS"); - USB_DEVICE_CLASS: commit 007bab91324e ("USB: remove CONFIG_USB_DEVICE_CLASS"); - RCU_CPU_STALL_DETECTOR: commit a00e0d714fbd ("rcu: Remove conditional compilation for RCU CPU stall warnings"); - SYSCTL_SYSCALL_CHECK: commit 7c60c48f58a7 ("sysctl: Improve the sysctl sanity checks"); - IP_NF_QUEUE: commit 3dd6664fac7e ("netfilter: remove unused "config IP_NF_QUEUE""); - IP_NF_TARGET_ULOG: commit d4da843e6fad ("netfilter: kill remnants of ulog targets"); - IP6_NF_QUEUE: commit d16cf20e2f2f ("netfilter: remove ip_queue support"); - IP6_NF_TARGET_LOG: commit 6939c33a757b ("netfilter: merge ipt_LOG and ip6_LOG into xt_LOG"); - USB_LED: commit a335aaf3125c ("usb: misc: remove outdated USB LED driver"); - MMC_UNSAFE_RESUME: commit 2501c9179dff ("mmc: core: Use MMC_UNSAFE_RESUME as default behavior"); - AUTOFS_FS: commit 561c5cf9236a ("staging: Remove autofs3"); - DISPLAY_SUPPORT: commit 5a6b5e02d673 ("fbdev: remove display subsystem"); - CFG80211_REG_DEBUG: commit c799ba6eab7a ("cfg80211: remove CFG80211_REG_DEBUG"); - VIDEO_OUTPUT_CONTROL: commit f167a64e9d67 ("video / output: Drop display output class support"); - USB_LIBUSUAL: commit f61870ee6f8c ("usb: remove libusual"); - CRYPTO_ZLIB: commit 110492183c4b ("crypto: compress - remove unused pcomp interface"); - BLK_DEV_UB: commit 68a5059ecf82 ("block: remove the deprecated ub driver"); Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> [for vexpress] Acked-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2016-08-09ARM: i.MX: Move SOC_IMX1 into 'Device tree only'Alexander Shiyan
This patch moves SOC_IMX1 into 'Device tree only' category and renames imx1-dt.c to mach-imx1.c to align with the name schema of other i.MX DT only platforms. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-09ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board supportAlexander Shiyan
Synertronixx SCB9328 board is very similar to Armadeus APF9328, so it can be easily reimplemented in DT way. This patch removes support for non-DT support for this board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-09ARM: i.MX: Remove i.MX1 Armadeus APF9328 board supportAlexander Shiyan
mach-apf9328.c can be replaced with devicetree equivalent: imx1-apf9328.dts, so remove the board file. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-01ARM: imx_v4_v5_defconfig: Enable initramfs supportJan Luebbe
This makes it possible to automatically boot-test this defconfig with kernelci.org. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-01ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfigJan Luebbe
Regenerate imx_v4_v5_defconfig by running: make imx_v4_v5_defconfig - Manually disable EXT2_FS and EXT3_FS make savedefconfig mv defconfig arch/arm/configs/imx_v4_v5_defconfig Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-14ARM: imx_v4_v5_defconfig: Add I.MX25 Touchscreen controller and ADC support.Denis Carikli
Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
2015-04-22Merge tag 'armsoc-defconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Olof Johansson: "We keep collecting defconfig updates in a separate branch mostly to encourage people to handle them separately and avoid conflicts between different topics. Most of these are enablement of new drivers that have come in, or minor config refreshes due to reorderings in Kconfig files, etc. I.e. mostly minor churn of various kinds. We might start folding this branch into something else for upstream merge since it's so small, but keep it independent in our own tree for the above reasons" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) ARM: multi_v7_defconfig: enable alpine platform ARM: multi_v7_defconfig: Add gpio-restart driver ARM: multi_v7_defconfig: Build the Marvell WiFi-Ex driver as a module ARM: multi_v7_defconfig: Enable support for ELAN i2c trackpads ARM: multi_v7_defconfig: Enable Tegra ACTMON support ARM: configs: remove all CONFIG_RCAR_AUDMAC_PP from ARM defconfigs ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig ARM: exynos_defconfig: Enable HDMI support ARM: exynos_defconfig: Enable options to mount a rootfs via NFS ARM: qcom: Increase MMC_BLOCK_MINORS in defconfig ARM: mvebu: Enable perf support in mvebu_v7_defconfig ARM: exynos_defconfig: Enable ChromeOS EC chardev driver ARM: exynos_defconfig: Enable CPU idle ARM: exynos_defconfig: Enable Marvell WiFi-Ex support arm: qcom: Update defconfig arm: qcom: Enable lpass clock driver in defconfig ARM: omap2plus_defconfig: Enable n900 modem as loadable modules ARM: omap2plus_defconfig: Update bluetooth options ARM: omap2plus_defconfig: Enable leds-pwm ARM: omap1_defconfig: drop obsolete Kconfig symbols ...
2015-03-13ARM: imx_v4_v5_defconfig: Remove CONFIG_MACH_MX25_3DSFabio Estevam
We do not have CONFIG_MACH_MX25_3DS platform anymore, so update the defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-11ARM: mx25: Convert to a dt-only platformFabio Estevam
As there is no more mx25 board files, we can turn mx25 into a dt-only platform. Rename imx25-dt.c to mach-imx25.c to be consistent with the other i.MX SoCs. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-02ARM: imx_v4_v5_defconfig: Add VFAT supportFabio Estevam
Select CONFIG_VFAT_FS by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-04ARM: imx: Fix the removal of CONFIG_SPI optionFabio Estevam
Since 64546e9fe3a5b8c ("ARM: imx_v6_v7_defconfig updates") and commit 0650f855d2e4b0b9 ("ARM: imx_v4_v5_defconfig: Select CONFIG_IMX_WEIM") CONFIG_SPI selection was dropped by savedefconfig for imx_v4_v5_defconfig and imx_v6_v7_defconfig. In order to keep the same behaviour as previous kernel versions and avoid regressions, let's add CONFIG_SPI option back. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-09-16ARM: imx_v4_v5_defconfig: Select CONFIG_IMX_WEIMFabio Estevam
The imx weim driver is used by some mx27/mx1 boards, so let's enable it by default. Generated this patch by doing: - make imx_v4_v5_defconfig - make menuconfig and manually select CONFIG_IMX_WEIM - make savedefconfig - cp defconfig arch/arm/configs/imx_v4_v5_defconfig ,which results in some additional cleanups. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-01ARM: i.MX: Remove i.MX1 ADS board supportAlexander Shiyan
mx1ads.c can be replaced with devicetree equivalent: imx1-ads.dts, so remove the board file. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-01ARM: i.MX: Remove Phytec i.MX27 PCM038/PCM970 board filesAlexander Shiyan
pcm970-baseboard.c and mach-pcm038.c can be replaced with their devicetree equivalents: imx27-phytec-phycore-rdk.dts and imx27-phytec-phycore-som.dtsi respectively, so remove the board files. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-01ARM: i.MX: Remove mach-cpuimx27sd board fileAlexander Shiyan
eukrea_mbimx27-baseboard.c and mach-cpuimx27.c can be replaced with their devicetree equivalents: imx27-eukrea-mbimxsd27-baseboard.dts and imx27-eukrea-cpuimx27.dtsi respectively, so remove the board files. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX: Remove Freescale Logic Product Development i.MX27 Lite-Kit board ↵Alexander Shiyan
support The board has no insufficient support to be fully functional and seems has no users. This patch removes support for this board. However, the support may be added in the future by using the devicetree. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx_v4_v5_defconfig: Add USB device optionsFabio Estevam
Allow USB device to work by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX: Remove Freescale i.MX27 IP Camera board supportAlexander Shiyan
The board has no insufficient support to be fully functional and seems has no users. This patch removes support for this board. However, the support may be added in the future by using the devicetree. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx: defconfig: Select CONFIG_FHANDLEFabio Estevam
CONFIG_FHANDLE=y is needed when running systemd with version >=210, so that it can spawn a serial tty via getty. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-12ARM: imx_v4_v5_defconfig: drop CONFIG_COMMON_CLK_DEBUG optionShawn Guo
The option COMMON_CLK_DEBUG was removed by commit ea72dc2 (clk: remove CONFIG_COMMON_CLK_DEBUG), so let's remove CONFIG_COMMON_CLK_DEBUG from the defconfig. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-12ARM: imx: drop CONFIG_MMC_UNSAFE_RESUME from defconfigShawn Guo
Since 2501c91 (mmc: core: Use MMC_UNSAFE_RESUME as default behavior), CONFIG_MMC_UNSAFE_RESUME is not available anymore. Drop it from imx defconfig. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-30ARM: imx_v4_v5_defconfig: Enable drivers for i.MX25/i.MX35 USB support.Denis Carikli
Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-03-05ARM: imx_v4_v5_defconfig: Select CONFIG_MMC_UNSAFE_RESUMEFabio Estevam
PM subsystem treats mmc card as removed during suspend. If MMC is used to store the root file system, it is better to tell the kernel not to treat it as a removable media, so select CONFIG_MMC_UNSAFE_RESUME for such purpose. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-09ARM: imx_v4_v5_defconfig: Enable gpio regulator and gpio button/keyboard.Denis Carikli
The eukrea mbimxsd25 has a gpio regulator for enabling its LCD display, it also has a gpio button. We enable the respective drivers in order to be able to use theses features with this configuration. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx: Re-select CONFIG_SND_SOC_IMX_MC13783 optionFabio Estevam
Commit 02502da45 (ASoC: imx-mc13783: Depend on ARCH_ARM) caused the selection of CONFIG_SND_SOC_IMX_MC13783 to be impossible due to a wrong dependency, which caused CONFIG_SND_SOC_IMX_MC13783 to be removed after the defconfigs cleanups. The original selection problem has been fixed by 9f19de649f (ASoC: imx-mc13783: Make SND_SOC_IMX_MC13783 visible again), so it is possible to select CONFIG_SND_SOC_IMX_MC13783 again as originally done. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfigFabio Estevam
Generate imx_v4_v5_defconfig by doing: make imx_v4_v5_defconfig make savedefconfig cp defconfig arch/arm/configs/imx_v4_v5_defconfig No functional change. The goal here is to cleanup imx_v4_v5_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: imx_v4_v5_defconfig: Select CONFIG_MACH_IMX25_DTFabio Estevam
Allow booting a mx25 dt kernel by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-12ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFSFabio Estevam
Add CONFIG_GPIO_SYSFS as it is helpful for accessing GPIO from userspace. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-12ARM: imx_v4_v5_defconfig: Add VPU supportFabio Estevam
Let the VPU driver be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-12ARM: imx: configs: enable netfilter supportJavier Martinez Canillas
The Netfilter packet filtering framework is useful for so many use cases that most people will build kernels with it enabled. So, it would probably make sense to have it enabled by default. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-12-12Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC board updates from Olof Johansson: "This branch contains a set of various board updates for ARM platforms. A few shmobile platforms that are stale have been removed, some defconfig updates for various boards selecting new features such as pinctrl subsystem support, and various updates enabling peripherals, etc." Fix up conflicts mostly as per Olof. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits) ARM: S3C64XX: Add dummy supplies for Glenfarclas LDOs ARM: S3C64XX: Add registration of WM2200 Bells device on Cragganmore ARM: kirkwood: Add Plat'Home OpenBlocks A6 support ARM: Dove: update defconfig ARM: Kirkwood: update defconfig for new boards arm: orion5x: add DT related options in defconfig arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree arm: orion5x: basic Device Tree support arm: orion5x: mechanical defconfig update ARM: kirkwood: Add support for the MPL CEC4 arm: kirkwood: add support for ZyXEL NSA310 ARM: Kirkwood: new board USI Topkick ARM: kirkwood: use gpio-fan DT binding on lsxl ARM: Kirkwood: add Netspace boards to defconfig ARM: kirkwood: DT board setup for Network Space Mini v2 ARM: kirkwood: DT board setup for Network Space Lite v2 ARM: kirkwood: DT board setup for Network Space v2 and parents leds: leds-ns2: add device tree binding ARM: Kirkwood: Enable the second I2C bus ARM: mmp: select pinctrl driver ...
2012-10-19ARM: mach-imx: Fix selection of ARCH_MXCFabio Estevam
Since commit c5a0d497(ARM: imx: enable multi-platform build), ARCH_MXC is selected by the following logic: config ARCH_MXC def_bool y if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 , which causes build error on vexpress_defconfig: arch/arm/mach-imx/hotplug.c:49: undefined reference to `imx_enable_cpu' arch/arm/mach-imx/platsmp.c:57: undefined reference to `imx_set_cpu_jump' arch/arm/mach-imx/platsmp.c:58: undefined reference to `imx_enable_cpu' Make ARCH_MXC a user selectable option, so that it does not get built by default on other defconfigs that select ARCH_MULTI_V4_V5 or ARCH_MULTI_V6_V7. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-15ARM: imx: enable multi-platform buildShawn Guo
It enables multi-platform build for imx. With ARCH_MULTI_* options coming to play, ARCH_MXC becomes an user invisible option, while ARCH_IMX_V4_V5 and ARCH_IMX_V6_V7 get removed. Both imx_v4_v5_defconfig and imx_v6_v7_defconfig get updated to adopt the changes. AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT are selected by ARCH_MXC now to save the duplication. Headers timex.h and uncompress.h are not needed for multi-platform build. Remove them. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-10ARM: imx: configs: Enable CONFIG_MEDIA_CAMERA_SUPPORTFabio Estevam
Since commit b4c184e5 (edia] media: reorganize the main Kconfig items), it is necessary to select CONFIG_MEDIA_CAMERA_SUPPORT in order to be able to use the SoC camera drivers. Select CONFIG_MEDIA_CAMERA_SUPPORT so that we can use mx2-camera/mx3-camera by default as previously. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-07-11ARM: imx_v4_v5_defconfig: update featuresSascha Hauer
- reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-29rtc: rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXCFabio Estevam
In order to keep consistency with other rtc drivers,rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> [akpm@linux-foundation.org: fix missed arch/arm/configs/imx_v6_v7_defconfig] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-26Merge tag 'defconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc defconfig updates from Olof Johansson: "For the first time, we have one branch that collects just updates to defconfig files, mostly for adapting to changes in other subsystems." * tag 'defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: PRIMA2: add prima2_defconfig for CSR SiRFprimaII ARM: tegra: update defconfig ARM: tegra: update defconfig ARM: imx_v6_v7_defconfig: Add SPI NOR support ARM: imx_v4_v5_defconfig: Let CONFIG_MACH_IMX27_DT be built by default
2012-04-27ARM: imx_v4_v5_defconfig: Let CONFIG_MACH_IMX27_DT be built by defaultFabio Estevam
Let CONFIG_MACH_IMX27_DT be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-25Merge tag 'imx-features-board-20120411-2' of ↵Olof Johansson
git://git.pengutronix.de/git/imx/linux-2.6 into next/boards * tag 'imx-features-board-20120411-2' of git://git.pengutronix.de/git/imx/linux-2.6: ARM i.MX: Visstrim_M10: Add board version detection. ARM: imx_v4_v5_defconfig: enable adc and touch driver of mc13783 ARM: i.MX: i.MX35-PDK: Add regulator support
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 08:43:37 +0000