summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)Author
2012-11-16Merge tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann
into next/dt From Shawn Guo <shawn.guo@linaro.org>: It's based on imx/multiplatform branch. Most of them are dts changes. There are also a few imx6 improvement patches in there. * tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx6q: select ARM and PL310 errata ARM: imx6q: print silicon version on boot ARM i.MX dts: Consistently add labels to devicenodes ARM: dts: imx6q-sabresd: add volume up/down gpio keys ARM: dts: imx53: pinctl update ARM: imx: enable cpufreq for imx6q ARM: dts: imx6q: enable snvs lp rtc ARM: dts: imx6q-sabreauto: Add basic support ARM: imx6q: let users input debug uart port number ARM: dts: imx53-qsb: Make DA9053 regulator functional ARM: dts: imx53-qsb: Use pinctrl for gpio-led ARM i.MX dtsi: Add default bus-width property for esdhc controller Signed-off-by: Arnd Bregmann <arnd@arndb.de>
2012-11-16Merge tag 'mxs-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann
into next/dt From Shawn Guo <shawn.guo@linaro.org>: It's mxs device tree changes for 3.8. The majority is device tree source updates. One timer improvement and one defconfig update are also included there. * tag 'mxs-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs_defconfig: Improve USB related support ARM: mxs: apf28dev: Add I2C and SPI support ARM: mxs: Setup scheduler clock ARM: dts: mxs: Add hog pins to Crystalfontz boards ARM: dts: cfa10036: Use pinctrl for power led ARM: mxs: apf28dev: Add LCD and backlight support ARM: mxs: apf28dev: Add pinctrl and gpios ARM: dts: mxs: Add 16 bits LCD screen muxing options for I.MX28 ARM: dts: cfa10049: Add the DH2228FV DAC to the DTS ARM: mxs: Add support for the Armadeus Systems APF28Dev docking board ARM: mx28: Skip OCOTP FEC MAC setup if in DT ARM: dts: mxs: Add PWM3 muxing options for i.MX28 ARM: mxs: Add support for the Armadeus Systems APF28 module ARM: dts: cfa10049: Add FEC to the CFA-10049 expansion board ARM: dts: imx23-olinuxino: Use pinctrl for gpio-led ARM: dts: imx23-olinuxino: Remove unneeded "default-on" ARM: dts: imx28-evk: Use pinctrl for gpio-led Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-16Merge branch 'arm-next' of git://git.xilinx.com/linux-xlnx into next/dtArnd Bergmann
From Michal Simek <michal.simek@xilinx.com>: These are based on previous patches (arm-soc zynq/cleanup branch). The branch is still based on rc3 but I have also tried to merged it with the v3.7-rc5 and there is no issue. * 'arm-next' of git://git.xilinx.com/linux-xlnx: ARM: zynq: add clk binding support to the ttc ARM: zynq: use zynq clk bindings clk: Add support for fundamental zynq clks ARM: zynq: dts: split up device tree ARM: zynq: Allow UART1 to be used as DEBUG_LL console. ARM: zynq: dts: add description of the second uart ARM: zynq: move arm-specific sys_timer out of ttc zynq: move static peripheral mappings zynq: remove use of CLKDEV_LOOKUP zynq: use pl310 device tree bindings zynq: use GIC device tree bindings Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-16Merge tag 'imx-dt' of git://git.pengutronix.de/git/imx/linux-2.6 into next/dtArnd Bergmann
From Sascha Hauer <s.hauer@pengutronix.de>: ARM i.MX dt updates for 3.8 * tag 'imx-dt' of git://git.pengutronix.de/git/imx/linux-2.6: Add device tree file for the armadeus apf27 ARM i.MX: Add Ka-Ro TX25 devicetree ARM i.MX25: Add devicetree ARM i.MX25: Add devicetree support ARM i.MX25: Add missing clock gates Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-16Add device tree file for the armadeus apf27Philippe Reynes
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-16ARM i.MX dts: Consistently add labels to devicenodesSascha Hauer
Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: dts: imx6q-sabresd: add volume up/down gpio keysLiu Ying
Add volume up/down gpio keys support in imx6q-sabresd.dts. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: dts: imx53: pinctl updateRoland Stigge
This patch supplements pinctl support on i.MX53. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: imx: enable cpufreq for imx6qShawn Guo
It enables cpufreq support for imx6q with generic cpufreq-cpu0 driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: dts: imx6q: enable snvs lp rtcShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: dts: imx6q-sabreauto: Add basic supportFabio Estevam
mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: dts: imx53-qsb: Make DA9053 regulator functionalFabio Estevam
Setup the GPIO7_11 pin as interrupt to the DA9053 and also rename the regulator nodes so that they match with the datasheet. This allows probing of DA9053 to succeed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM: dts: imx53-qsb: Use pinctrl for gpio-ledFabio Estevam
Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver has pinctrl support, so setup the gpio led pin via pinctrl and avoid the following warning: leds-gpio leds.2: pins are not configured from the driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16ARM i.MX dtsi: Add default bus-width property for esdhc controllerSascha Hauer
According to Documentation/devicetree/bindings/mmc/mmc.txt bus-width is a mandatory property. While this is currently enforced nowhere, it's a good habit to just add the property now to allow to add common helper functionality for the mmc property parsing later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15Merge tag 'omap-for-v3.8/dt-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren <tony@atomide.com>: Device tree related changes for omaps updating the various .dts files, and timer related changes to allow configuring the timer via device tree. * tag 'omap-for-v3.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (48 commits) usb: musb: dsps: dt binding - add resources, example ARM: dts: omap4-sdp: Add pinmux configuration for HDMI ARM: dts: omap4-panda: Add pinmux configuration for HDMI ARM: dts: Makefile: Add the am335x-evmsk target in dtbs list ARM: dts: AM33XX: Add usbss node ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSK ARM: dts: AM33XX: Add user-leds device tree data to am335x-evmsk ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK ARM: dts: AM33XX: Add user-leds device tree data to am335x-bone ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evm ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVM ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evm ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVM ARM: dts: omap5-evm: LPDDR2 memory device details for EVM ARM: dts: omap5: EMIF device tree data for OMAP5 boards ARM: dts: omap5-evm: Fix size of memory defined for EVM ARM: OMAP2+: Add device-tree support for 32kHz counter ARM: OMAP: Add DT support for timer driver ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-14ARM: zynq: add clk binding support to the ttcJosh Cartwright
Add support for retrieving TTC configuration from device tree. This includes the ability to pull information about the driving clocks from the of_clk bindings. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-14ARM: zynq: use zynq clk bindingsJosh Cartwright
Make the Zynq platform use the newly created zynq clk bindings. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-12ARM: zynq: dts: split up device treeJosh Cartwright
The purpose of the created zynq-7000.dtsi file is to describe the hardware common to all Zynq 7000-based boards. Also, get rid of the zynq-ep107 device tree, since it is not hardware anyone can purchase. Add a zc702 dts file based on the zynq-7000.dtsi. Add it to the dts/Makefile so it is built with the 'dtbs' target. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-12ARM i.MX: Add Ka-Ro TX25 devicetreeSascha Hauer
Basic support for the Ka-Ro i.MX25 based TX25 board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lothar Waßmann <LW@KARO-electronics.de>
2012-11-12ARM i.MX25: Add devicetreeSascha Hauer
This adds a i.MX25 dtsi file along with the i.MX25 clock tree documentation. The devicetree should be fairly complete for: - uart - fec - i2c - spi - pwm - nand - gpio - wdog - esdhc - flexcan The more exotic devices currently miss clock bindings. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-12Merge remote-tracking branch 'arm-soc/imx/multiplatform' into imx25-dtSascha Hauer
2012-11-12ARM: mxs: apf28dev: Add I2C and SPI supportGwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-07ARM: dts: omap4-sdp: Add pinmux configuration for HDMIRicardo Neri
Add the pinmux configuration for HDMI and TPD12S015A. Configure the gpios for the TPD12S015A and SDA, SCL and CEC for HDMI. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-07ARM: dts: omap4-panda: Add pinmux configuration for HDMIRicardo Neri
Add the pinmux configuration for HDMI and TPD12S015A. Configure the gpios for the TPD12S015A and SDA, SCL and CEC for HDMI. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06ARM: dts: Makefile: Add the am335x-evmsk target in dtbs listBenoit Cousson
The EVMSK was not built with the 'make dtbs' command. Add the missing entry in the dts Makefile. Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06ARM: dts: AM33XX: Add usbss nodeAjay Kumar Gupta
Device tree node for usbss on AM33XX. There are two musb controllers on am33xx platform so have port0-mode and port1-mode data. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com> [afzal@ti.com: reg & interrupt property addition] Signed-off-by: Afzal Mohammed <afzal@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmskAnilKumar Ch
Add gpio based push buttons device tree data to am335x-evmsk device by adding all the necessary parameters like key-code, gpios and etc. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSKAnilKumar Ch
Add pinmux configurations for gpio based keys to am335x-evmsk. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06ARM: dts: AM33XX: Add user-leds device tree data to am335x-evmskAnilKumar Ch
Add gpio-leds device tree data to am335x-evmsk device to enable gpio based user-leds (USR0, USR1, USR2 and USR3) present on am335x starter kit. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSKAnilKumar Ch
Add pinmux configurations for gpio based volume keys to am335x-evmsk. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06ARM: dts: AM33XX: Add user-leds device tree data to am335x-boneAnilKumar Ch
Add gpio-leds device tree data to am335x-bone device to enable gpio based user-leds (USR0, USR1, USR2 and USR3) present on BeagleBone. [koen@dominion.thruhere.net: led0, led1 suggested by koen] Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONEAnilKumar Ch
Add pinmux configurations for gpio based user-keys to am335x-bone. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evmAnilKumar Ch
Add gpio based volume keys device tree data to am335x-evm by adding all the required parameters like keycode, gpios and etc. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVMAnilKumar Ch
Add pinmux configurations for gpio volume keys. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evmAnilKumar Ch
Add matrix keypad device tree data to am335x-evm by adding all the necessary parameters like keymap, row & column gpios and etc. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVMAnilKumar Ch
Add pinmux configurations for gpio matrix keypad. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-05ARM: dts: omap5-evm: LPDDR2 memory device details for EVMLokesh Vutla
Samsung's K3PE0E000B memory part is used in OMAP5-evm board. Adding timings and geometry details for Samsung's memory part and attaching the same to device-handle of EMIF1/2. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-05ARM: dts: omap5: EMIF device tree data for OMAP5 boardsLokesh Vutla
Adding EMIF device tree data for OMAP5 boards. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-05ARM: dts: omap5-evm: Fix size of memory defined for EVMLokesh Vutla
Memory present for OMAP5-evm is 2GB. But in dts file it is specified as 1GB. Correcting the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-05ARM: zynq: dts: add description of the second uartJosh Cartwright
The zynq-7000 has an additional UART at 0xE0001000. Describe it in the device tree. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-05ARM: dts: mxs: Add hog pins to Crystalfontz boardsMaxime Ripard
Use a hog_pins pinctrl group to force the muxing of GPIOs used on the Crystalfonz CFA10036 and CFA10049 boards. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-05ARM: dts: cfa10036: Use pinctrl for power ledMaxime Ripard
The leds-gpio driver recently got pinctrl support, so setup the power led gpio muxing through pinctrl. This avoids the warning: leds-gpio leds.X: pins are not configured from the driver Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-05ARM: mxs: apf28dev: Add LCD and backlight supportGwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-05ARM: mxs: apf28dev: Add pinctrl and gpiosGwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-02ARM: dts: mxs: Add 16 bits LCD screen muxing options for I.MX28Gwenhael Goavec-Merou
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-02ARM: dts: cfa10049: Add the DH2228FV DAC to the DTSMaxime Ripard
There is no driver for it yet, so it will use spidev. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-01ARM: dts: OMAP5: Add counter nodeJon Hunter
Add the 32kHz counter node for OMAP5 devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-01ARM: dts: OMAP5: Add timer nodesJon Hunter
Add the 11 timer nodes for OMAP5 devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-01ARM: dts: OMAP4: Update timer addressesJon Hunter
For OMAP4 devices, timers 5-8 have both a L3 bus address and a Cortex-A9 private bus address. Currently the device-tree source only contains the L3 bus address for these timers. Update these timers to include the Cortex-A9 private address and make the default address the Cortex-A9 private bus address to match the current HWMOD implementation. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-01ARM: dts: AM33XX: Add SPI nodePhilip, Avinash
Add McSPI data node to AM33XX device tree file. The McSPI module (and so as the driver) is reused from OMAP4. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Tested-by: Matt Porter <mporter@ti.com> [b-cousson@ti.com: Remove interrupt-parent] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 03:39:23 +0000