summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/sama5d3.dtsi
AgeCommit message (Collapse)Author
2015-10-19ARM: at91/dt: use syscon for PMCAlexandre Belloni
The PMC is not only used to drive the clocks but also has some registers related to other functions. One of those is for example the USB gadget bias. Using a syscon allows to properly separate those functions. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-18ARM: at91/dt: sama5d3: update iio config for touchscreenJosh Wu
Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-08-07ARM: at91/dt: sama5d3: use slow clock where necessaryAlexandre Belloni
The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary. [boris.brezillon@free-electrons.com: add tcb clocks] Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-07-30ARM: at91/dt: sama5: update rstc to correct compatible stringJosh Wu
They'll use "atmel,sama5d3-rstc" for reset function. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [nicolas.ferre@atmel.com: add the old compatible string as a fallback] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-07-01ARM: at91/dt: update udc compatible stringsBoris Brezillon
at91sam9g45, at91sam9x5 and sama5 SoCs should not use "atmel,at91sam9rl-udc" for their USB device compatible property since this compatible is attached to a specific hardware bug fix. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: <stable@vger.kernel.org> #4.0+ Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-05-22ARM: at91/dt: remove useless usb clockBoris Brezillon
The ohci driver now calls clk_set_rate on the uhpck clock (which forwards set_rate requests to its parent: the usb clock). Remove useless references to usb clocks from ohci definitions. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-05-22ARM: at91/dt: remove useless uhpck clock references from ehci defintionsBoris Brezillon
The uhpck is useless for High-Speed communications, remove the reference to this clock in all ehci definitions. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-05-19ARM: at91/dt: sama5: reduce the NFC command register mapJosh Wu
commit 111573ccd89b ("mtd: atmel_nand: check NFC busy flag by HSMC_SR instead of NFC cmd regs") check NFC busy by nfc SR instead of NFC cmd regs. So we don't need to map NFC cmd registers to include NFCBUSY bit. That means we only need map 0x08000000 instead of 0x10000000 for NFC cmd regs. This patch reduce the NFC cmd regs map for sama5d3 & sama5d4. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-22Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As always, this tends to be one of our bigger branches. There are lots of updates this release, but not that many jumps out as something that needs more detailed coverage. Some of the highlights are: - DTs for the new Annapurna Labs Alpine platform - more graphics DT pieces falling into place on Exynos, bridges, clocks. - plenty of DT updates for Qualcomm platforms for various IP blocks - some churn on Tegra due to switch-over to tool-generated pinctrl data - misc fixes and updates for Atmel at91 platforms - various DT updates to add IP block support on Broadcom's Cygnus platforms - more updates for Renesas platforms as DT support is added for various IP blocks (IPMMU, display, audio, etc)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits) ARM: dts: alpine: add internal pci Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135." ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB ARM: dts: qcom: Add idle state device nodes for 8064 ARM: dts: qcom: Add idle states device nodes for 8084 ARM: dts: qcom: Add idle states device nodes for 8974/8074 ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs devicetree: bindings: Document qcom,idle-states devicetree: bindings: Update qcom,saw2 node bindings dt-bindings: Add #defines for MSM8916 clocks and resets arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974 arm: dts: qcom: Add LCC nodes arm: dts: qcom: Add TCSR support for MSM8960 arm: dts: qcom: Add TCSR support for MSM8660 arm: dts: qcom: Add TCSR support for IPQ8064 ...
2015-04-03Merge tag 'omap-for-v4.1/wl12xx-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "wireless wl12xx and omap device tree changes for v4.1" from Tony Lindgren: Wireless and omap changes to make wl12xx driver to use device tree data instead of platform data from Eliad Peller <eliad@wizery.com>: - Add device-tree support to the wlcore (wl12xx/wl18xx) driver. - Update the current users to use the bindings instead of pdata-quirks. - Finally, remove the deprecated wl12xx_platform_data struct Note that da850 board file code that still uses the platform data, but we have da850.dtsi that can be used instead. So it was decided that we should try to remove the wl12xx support from the da850 board file as suggested by Sekhar Nori <nsekhar@ti.com>. As it's the last patch in the series, the last patch can be simply reverted if needed. As this series touches quite a bit of arch code, it was suggested by Kalle Valo <kvalo@codeaurora.org> that the whole series should be merged via the arm-soc tree. * tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: wlcore: remove wl12xx_platform_data ARM: dts: add wl12xx/wl18xx bindings wlcore: add device-tree support dt: bindings: add TI's wilink wireless device wl12xx: use frequency instead of enumerations for pdata clocks wlcore: set irq_trigger in board files instead of hiding behind a quirk + Linux 4.0-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-23ARM: at91/dt: sama5d3: add uart1 pinctrl definitionNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-23ARM: at91/dt: sama5d3: add uart0Nicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
2015-03-13ARM: at91/dt: introduce atmel,<chip>-dbguAlexandre Belloni
The DBGU is not a simple UART and we need to be able to distinguish it from the other UARTs, in particular to get its address and check the chip id. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-11ARM: at91/dt: fix USB high-speed clock to select UTMINicolas Ferre
The UTMI clock must be selected by any high-speed USB IP. The logic behind it needs this particular clock. So, correct the clock in the device tree files affected. Reported-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: <stable@vger.kernel.org> #3.18
2015-03-04ARM: at91/dt: keep watchdog running in idle modeMichel Marti
Since turning on idle-halt in commit fe46aa679f12 (ARM: at91/dt: add sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt no longer reboot if the watchdog times out while the CPU is in idle state. Removing the 'idle-halt' flag that was set by default fixes this. Signed-off-by: Michel Marti <mma@objectxp.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Sylvain Rochet <sylvain.rochet@finsecur.com> [nicolas.ferre@atmel.com: rework the commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: add ov2640 camera sensor supportJosh Wu
According to v4l2 dt document, we add: a camera host: ISI port. a i2c camera sensor: ov2640 port. to sama5d3xmb.dtsi. The ov2640 node defines the pinctrls, clocks and refer to isi port. The ISI node also has a reference to the ov2640 port. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: move the isi mck pin to mbBo Shen
The mck is decided by the board design, move it to mb related dtsi file. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: add missing pins of isiBo Shen
The ISI has 12 data lines, add the missing two data lines. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: split isi pinctrlBo Shen
As the ISI has 12 data lines, however we only use 8 data lines with sensor module. So, split the data line into two groups which make it can be choosed depends on the hardware design. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: add isi clockJosh Wu
Add ISI peripheral clock in sama5d3.dtsi. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91/dt: add SRAM nodesAlexandre Belloni
Add nodes for the SRAM available on atmel SoCs For the at91sam9260 and the at91sam9g20, address mirroring is used to create a single contiguous SRAM range instead of declaring two separate banks. Also remove leftover TODOs in the sam9g45 file Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: correct at91sam9rl sram size => 0x10000] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: sama5d3: Add SFRAlexandre Belloni
The sama5d3 has Special Function Registers that allow to manage OHCI, EBI and the UTMI clock. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: reg size: 0x60] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: sama5d3: use new pinctrl compatible stringMarek Roszko
This switches the SAMA5D3 to use the new atmel,sama5d3-pinctrl id that was added with the drive strength options patch. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> [nicolas.ferre@atmel.com: second compatible string kept as at91sam9x5] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: sama5d3: add the nfc clockAlexandre Belloni
The atmel_nand driver is now able to handle the nfc clock, add it to sama5d3. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-02ARM: at91: sama5d3: add usart dma configurationsLudovic Desroches
Add the DMA configuration for USARTs mainly because it is not obvious to add the FIFO flag which is needed for rx. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-19Merge tag 'at91-dt-for-3.17' of ↵Nicolas Ferre
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux Pull AT91 ramc and reset/poweroff related DT patches from Maxim Ripard: "This branch gathers a few devicetree patches needed for the reworks found in the later patches to be sent. More precisely, it holds: - The addition of ddrck for the sama5d3 and the sam9 SoCs - The addition of the shutdown controller node in the sama5d3 DTSI - The slight rework of the ramc bindings for the SoCs that have several RAM controllers" Conflicts: arch/arm/boot/dts/at91sam9g45.dtsi
2014-07-15ARM: at91/dt: sama5d3: Add shutdown controllerMaxime Ripard
The SAMA5D3 has a shutdown controller identical to the sam9x5 SoC family. Declare it in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-15ARM: at91/dt: sama5d3: define mpddr clock and ramc clocksAlexandre Belloni
Define the available clock for mprddr and take both mpddr_clk and ddrck in the ram controller driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91/dt: sama5d3 crystals under the clocks nodeAlexandre Belloni
Having clocks grouped in a subnode is common practice, so move the crystals under a clocks node for the sama5d3 SoC and sama5d3 based boards. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-23Merge tag 'at91-dt3' of git://github.com/at91linux/linux-at91 into next/dtArnd Bergmann
3.16 third DT series: - move of both at91sam9n12 and at91sam9x5 to CCF * tag 'at91-dt3' of git://github.com/at91linux/linux-at91: ARM: at91: move sam9n12 SoC to the CCF ARM: at91/dt: define sam9n12ek crystal frequencies ARM: at91/dt: define sam9n12 clocks ARM: at91: prepare common clk transition for sam9n12 SoC ARM: at91: move sam9x5 SoCs to the CCF ARM: at91/dt: define sam9x5ek's crystal frequencies ARM: at91/dt: define sam9x5 clocks ARM: at91: prepare common clk transition for sam9x5 SoCs dt-bindings: clock: Move at91.h to dt-bindigs/clock ARM: at91: fix spi cs on sama5d3 Xplained board Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-23Merge branch 'at91/cleanup' into next/dtArnd Bergmann
Conflicts: arch/arm/boot/dts/at91sam9rl.dtsi Needed as a dependency for the at91/dt2 branch Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-22Merge branch 'at91-3.16-cleanup' into at91-3.16-dt3Nicolas Ferre
2014-05-12ARM: at91: add PWM pinctrl to SAMA5D3Nicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-05-07ARM: at91/dt: move sama5d3 SoC to the new main/slow clk modelBoris BREZILLON
Replace the old main and clk definitions (fixed rate clk) by the new main and slow clk subtree definition (ck = mux(rc_osc, osc)). Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-04-18dt-bindings: clock: Move at91.h to dt-bindigs/clockTushar Behera
Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: Rob Landley <rob@landley.net> CC: Andrew Victor <linux@maxim.org.za> CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Acked-by: Boris BREZILLON <b.brezillon.dev@gmail.com> [nicolas.ferre@atmel.com: add new at91sam9261 & at91sam9rl] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-04-18ARM: at91: sama5d3: add DMA property for SSC devicesBo Shen
Add DMA property for SSC devices on SAMA5D3 SoC. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-12ARM: at91/dt: sama5d3: remove useless adc propertiesAlexandre Belloni
Remove the properties that are not used anymore by the at91_adc driver and fix the atmel,adc-use-external-triggers property name. Also, add #address-cells, #size-cells and a reg for each trigger to comply to the ePAPR. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-12ARM: at91: sama5d3: get rid of atmel_tsadcc driverLudovic Desroches
Touchscreen support for at91_adc has been introduced so we can get rid of atmel_tsadcc. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-10ARM: at91/DT: add NAND + DMA propertyNicolas Ferre
Add the "atmel,nand-has-dma" property to NAND node for SoC that can use the DMA to perform NAND accesses. Use of this property was added in 1b7192658a08f70df0f290634fd7cd2ecb629fc9 (mtd: atmel_nand: add a new dt binding item for nand dma support). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
2014-02-07ARM: at91/dt: fix sama5d3 ohci hclk clock referenceBoris BREZILLON
The hclk clock of the ohci node is referencing udphs_clk instead of uhphs_clk. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-01-28ARM: at91/dt: add sam9 watchdog default options to SoCsBoris BREZILLON
Set default watchdog options in every SoC compatible with the sam9 watchdog. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-12-22Merge tag 'at91-dt2' of git://github.com/at91linux/linux-at91 into next/dtOlof Johansson
From Nicolas Ferre: Second DT pull-request for 3.14 - now that PWM driver is on its way to mainline, we can integrate the DT entries - As an example, use PWM for at91sam9m10g45ek leds - Addition of clock specification for newly introduced crypto DT entries * tag 'at91-dt2' of git://github.com/at91linux/linux-at91: ARM: at91/dt: add clk properties to sama5d3 TDES device node ARM: at91/dt: add clk properties to sama5d3 AES device node ARM: at91/dt: add clk properties to sama5d3 SHA device node ARM: at91: at91sam9m10g45ek: switch to PWM leds ARM: at91: add PWM device node Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-19ARM: at91/dt: add clk properties to sama5d3 TDES device nodeBoris BREZILLON
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-19ARM: at91/dt: add clk properties to sama5d3 AES device nodeBoris BREZILLON
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-19ARM: at91/dt: add clk properties to sama5d3 SHA device nodeBoris BREZILLON
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-19ARM: at91: add PWM device nodeBo Shen
Add PWM device node for AT91 series SoC. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-10Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtKevin Hilman
From Nicolas Ferre: First DT pull-request for 3.14 - many little corrections and documentation updates - LCD FB Device Tree for at91sam9263 and at91sam9g45 boards - crypto peripherals DT entries + DMA specification - new Cosino board * tag 'at91-dt' of git://github.com/at91linux/linux-at91: (21 commits) ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order ARM: at91: dt: at91rm9200ek: add emac and nor flash support ARM: at91: add uart aliases to sama5d3 dtsi ARM: at91: add i2c2 pinctrl speficifation to sama5d3 DT ARM: at91: Animeo IP: fix mtd partition table ARM: at91: at91sam9g45: add i2c pinctrl ARM: at91: at91sam9g45: set default mmc pinctrl-names ARM: at91: sama5d3: enable qt1070 as a wakeup source ARM: at91: add support for Cosino board series by HCE Engineering ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix ARM: at91/dt/trivial: use macro for AES irq type ARM: at91: sam9263ek: add dt lcd support ARM: at91: at9sam9m10g45ek: add dt lcd support ARM: at91: sam9263: add fb dt support ARM: at91: sam9g45: add fb dt support ARM: at91/dt: binding: add missing compatibility string in SDRAM/DDR documentation ARM: at91/dt: binding: add precision to AIC documentation ARM: at91/dt: add atmel,pullup-gpio to at91rm9200ek usb1 definition ARM: at91/dt: add ethernet phy to at91rm9200ek board ... Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-10ARM: at91: sama5d3/dt: add sama5d36ek dts filesJosh Wu
Add .dts and .dtsi file to support sama5d36ek board. Also update the the comments for sama5d36 in sama5d3.dtsi. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-09ARM: at91: add i2c2 pinctrl speficifation to sama5d3 DTNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
2013-12-09ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodesNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>