summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/aspeed-g6.dtsi
AgeCommit message (Collapse)Author
2020-07-20ARM: dts: aspeed: ast2600: Update XDMA engine nodeEddie James
Add the PCI-E root complex reset, correct the pcie-device property, and add the Aspeed SCU interrupt controller include. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-05-05ARM: dts: aspeed: Change KCS nodes to v2 bindingAndrew Jeffery
Fixes the following warnings for both g5 and g6 SoCs: arch/arm/boot/dts/aspeed-g5.dtsi:376.19-381.8: Warning (unit_address_vs_reg): /ahb/apb/lpc@1e789000/lpc-bmc@0/kcs1@0: node has a unit name, but no reg property Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-05-05ARM: dts: Aspeed: AST2600: Add XDMA PCI-E root control resetEddie James
The AST2600 XDMA engine requires the PCI-E root control reset be cleared as well, so add a phandle to that syscon reset. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-05-05ARM: dts: aspeed: ast2600: Add XDMA EngineEddie James
Add a node for the XDMA engine with all the necessary information. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-05-05ARM: dts: aspeed: ast2600: Set arch timer always-onEddie James
According to ASPEED, FTTMR010 is not intended to be used in the AST2600. The arch timer should be used, but Linux doesn't enable high-res timers without being assured that the arch timer is always on, so set that property in the devicetree. The FTTMR010 device is described by set to disabled. This fixes highres timer support for AST2600. Fixes: 2ca5646b5c2f ("ARM: dts: aspeed: Add AST2600 and EVB") Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-05-05ARM: dts: aspeed: ast2600: Add Video Engine nodeJae Hyun Yoo
The AST2600 has Video Engine so add it. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-05-05ARM: dts: aspeed: ast2600: Add SCU interrupt controllersEddie James
Add nodes for the interrupt controllers provided by the SCU. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-03-15ARM: dts: aspeed-g6: add usb functionsTao Ren
Add USB components and according pin groups in aspeed-g6 dtsi. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-02-08Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-01-08ARM: dts: aspeed-g6: Fix FSI master locationJoel Stanley
The FIS nodes were placed incorrectly in the device tree. Fixes: 0fe4e304782c ("ARM: dts: aspeed-g6: Describe FSI masters") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed-g6: Cleanup watchdog unit addressAndrew Jeffery
arch/arm/boot/dts/aspeed-g6.dtsi:204.28-208.6: Warning (simple_bus_reg): /ahb/apb/watchdog@1e7850C0: simple-bus unit address format error, expected "1e7850c0" Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-07ARM: dts: aspeed-g6: Add timer descriptionJoel Stanley
The AST2600 has 8 32-bit timers on the APB bus. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed-g6: Add remaining UARTsJoel Stanley
The AST2600 has five UARTs. Add UART 1 to 4. Tested-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed-g6: Fix i2c clock sourceJoel Stanley
The upstream clock for the I2C buses is APB2. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed-g6: Describe FSI mastersJoel Stanley
The ast2600 has two FSI masters on the APB. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed-g6: Add pinctrl properties to MDIO nodesAndrew Jeffery
This way enabling the MDIO controllers automatically requests the right pinmux configuration. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed-g6: Add FMC and SPI devicesCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed-g6: Add lpc devicesBrad Bishop
Everything is the same as G5, except the devices have their own interrupt now. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed-g6: Add VUART descriptionsJoel Stanley
The AST2600 has two VUART devices. Reviewed-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed-g6: Add i2c busesJoel Stanley
The AST2600 has 16 I2C buses each with their own global IRQ line. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed-g6: Add gpio devicesRashmica Gupta
The AST2600 has 208 normal GPIO pins and 36 1.8V GPIOs. Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: ast2600-evb: eMMC configurationAndrew Jeffery
Enable the eMMC controller and limit it to 52MHz to avoid the host controller reporting bus error conditions. Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-09-12ARM: dts: aspeed: Add AST2600 pinmux nodesAndrew Jeffery
Add them in their own dtsi and include it in aspeed-g6.dtsi to isolate the cruft. Link: https://lore.kernel.org/r/20190911165614.31641-2-joel@jms.id.au Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-12ARM: dts: aspeed: Add AST2600 and EVBJoel Stanley
The AST2600 is a new SoC by ASPEED. It contains a dual core Cortex A7 CPU and shares many periperhals with the existing AST2400 and AST2500. Link: https://lore.kernel.org/r/20190911165614.31641-1-joel@jms.id.au Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-24 04:37:49 +0000