summaryrefslogtreecommitdiff
path: root/arch/arc/kernel/devtree.c
AgeCommit message (Collapse)Author
2016-11-08ARC: [plat-eznps] set default baud for early consoleNoam Camus
For CONFIG_SERIAL_EARLYCON we need 800MHz for NPS SoC The early console driver uses BASE_BAUD and not using dtb. The default of 50MHz is NOT good for NPS SoC. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09ARC: RIP arc_{get|set}_core_freq() clk APIAlexey Brodkin
There are no more users of this - so RIP! Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> [vgupta: update changelog] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09ARC: use fixed frequencies in arc_set_early_base_baud()Alexey Brodkin
UARTs usually have fixed clock so we're switching to use of constant values instead of something derived from core clock frequency. Among other things this will allow us to get rid of arc_{get|set}_core_freq() and switch to generic clock framework later on. Acked-by: Christian Ruppert <christian.ruppert@alitech.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-25ARCv2: [axs103] Support ARC SDP FPGA platform for HS38x coresVineet Gupta
Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: [axs101] support early 8250 uartVineet Gupta
Earlycon calculates UART clock as "BASE_BAUD * 16". In case of ARC "BASE_BAUD" is calculated dynamically in runtime, basically it is an alias to arc_early_base_baud(), which in turn just does "arc_base_baud/16". 8250 UART on AXS/SDP board uses 33.3MHz clock source which is set in "arc_base_baud" with this change. Additional compatibility string "snps,arc-sdp" is introduced as well because there're different flavours of AXS boards but they all share the same motherboard and so it's possible to re-use the same code for motherbord even if CPU daughterboard changes. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-02-04ARC: Fix earlycon build breakagePeter Hurley
Commit ffb7fcd66f14 ("ARC: Dynamically determine BASE_BAUD from DeviceTree") breaks arc:defconfig build: drivers/built-in.o: In function `of_setup_earlycon': (.init.text+0xb3e): undefined reference to `arc_early_base_baud' drivers/built-in.o: In function `setup_earlycon': (.init.text+0xcd0): undefined reference to `arc_early_base_baud' make: *** [vmlinux] Error 1 BASE_BAUD is only required for earlycon, which should depend on CONFIG_SERIAL_EARLYCON. Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-02-02ARC: Dynamically determine BASE_BAUD from DeviceTreeVineet Gupta
8250 earlycon is broken on multi-platform ARC because the UART clk value (BASE_BAUD) is fixed at build time. Instead, determine the appropriate UART clk at runtime; parse the devicetree early for platforms requiring alternate UART clk values (currently only the TB10X platform). Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Rob Herring <robh@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-06-23ARC: fix build warning in devtreeVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-04-30of/fdt: update of_get_flat_dt_prop in prep for libfdtRob Herring
Make of_get_flat_dt_prop arguments compatible with libfdt fdt_getprop call in preparation to convert FDT code to use libfdt. Make the return value const and the property length ptr type an int. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Grant Likely <grant.likely@linaro.org> Tested-by: Stephen Chivers <schivers@csc.com>
2013-10-09arc: remove unnecessary prom.h includesRob Herring
Remove unnecessary prom.h includes in preparation to remove prom.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Grant Likely <grant.likely@linaro.org>
2013-10-09arc: use common of_flat_dt_match_machineRob Herring
Convert arc to use the common of_flat_dt_match_machine function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2013-10-09arc: use early_init_dt_scanRob Herring
Convert arc to use new early_init_dt_scan function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2013-10-09arc: use unflatten_and_copy_device_treeRob Herring
Use the common unflatten_and_copy_device_tree to copy the built-in FDT out of init section. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Grant Likely <grant.likely@linaro.org>
2013-08-28of: consolidate definition of early_init_dt_alloc_memory_arch()Grant Likely
Most architectures use the same implementation. Collapse the common ones into a single weak function that can be overridden. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-02-26ARC: make a copy of flat DTVineet Gupta
The flat DT (currently embedded in vmlinux) is in .init section. The unflattened/binary tree doesn't copy strings through and references them from orig flat DT - which could cause catestrohpy if of_* APIs are called post init, say from a driver which is a loadable module. Reported-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-15ARC: [Review] Multi-platform image #2: Board callback InfrastructureVineet Gupta
The orig platform code orgnaization was singleton design pattern - only one platform (and board thereof) would build at a time. Thus any platform/board specific code (e.g. irq init, early init ...) expected by ARC common code was exported as well defined set of APIs, with only ONE instance building ever. Now with multiple-platform build requirement, that design of code no longer holds - multiple board specific calls need to build at the same time - so ARC common code can't use the API approach, it needs a callback based design where each board registers it's specific set of functions, and at runtime, depending on board detection, the callbacks are used from the registry. This commit adds all the infrastructure, where board specific callbacks are specified as a "maThine description". All the hooks are placed in right spots, no board callbacks registered yet (with MACHINE_STARt/END constructs) so the hooks will not run. Next commit will actually convert the platform to this infrastructure. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-02-15ARC: [DeviceTree] Convert some Kconfig items to runtime valuesVineet Gupta
* mem size now runtime configured (prev CONFIG_ARC_PLAT_SDRAM_SIZE) * core cpu clk runtime configured (prev CONFIG_ARC_PLAT_CLK) Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca>
2013-02-15ARC: [DeviceTree] Basic supportVineet Gupta
This is minimal infrastructure needed for devicetree work. It uses an a sample "skeleton" devicetree - embedded in kernel image - to print the board, manufacturer by parsing the top-level "compatible" string. As of now we don't need any additional "board" specific "machine_desc". TODO: support interpreting the command line as boot-loader passed dtb Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: James Hogan <james.hogan@imgtec.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: James Hogan <james.hogan@imgtec.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 04:16:20 +0000