summaryrefslogtreecommitdiff
path: root/arch/arc/boot
AgeCommit message (Collapse)Author
2019-08-05ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurationsEugeniy Paltsev
We want to use DW AXI DMAC on HSDK board in our automated verification to test cache & dma kernel code changes. This is perfect candidate as we don't depend on any external peripherals like MMC card / USB storage / etc. To increase test coverage we want to test both options: * DW AXI DMAC is connected through IOC port & dma direct ops used * DW AXI DMAC is connected to DDR port & dma noncoherent ops used Introduce 'arc_hsdk_axi_dmac_coherent' global variable which can be modified by debugger (same way as we patch 'ioc_enable') to switch between these options without recompiling the kernel. Depend on this value we tweak memory bridge configuration and "dma-coherent" DTS property of DW AXI DMAC. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-08ARC: [plat-hsdk]: enable DW SPI controllerEugeniy Paltsev
HSDK SoC has DW SPI controller. Enable it in preparation of enabling on-board SPI peripherals. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-08ARC: [haps] Add Virtio supportAlexey Brodkin
As a preparation for QEMU usage for ARC let's add basic Virtio-MMIO peripherals support for the platform we're going to use. For now we add 5 Virtio slots in .dts and enable block and network devices via Virtio-MMIO. Note even though typically Virtio register set fits in 0x200 bytes we "allocate" here 0x2000 so that it matches ARC's default 8KiB page size and so remapping of that area is done clearly. We also enable DEVTMPFS automount for more convenient use of external root file-stystem. Before that we used to use built-in Initramfs which didn't automount DEVTMPFS anyways so we didn't need that option, while now it starts making sense. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-08Merge tag 'spdx-5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 291Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called copying this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope [that] it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 57 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.515993066@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-28ARC: [plat-hsdk] Get rid of inappropriate PHY settingsAlexey Brodkin
Initial bring-up of the platform was done on FPGA prototype where TI's DP83867 PHY was used. And so some specific PHY options were added. Just to confirm this is what we get on FPGA prototype in the bootlog: | TI DP83867 stmmac-0:00: attached PHY driver [TI DP83867] ... On real board though we have Micrel KZS9031 PHY and we even have CONFIG_MICREL_PHY=y set in hsdk_defconfig. That's what we see in the bootlog: | Micrel KSZ9031 Gigabit PHY stmmac-0:00: ... So essentially all TI-related bits have to go away. Cc: Rob Herring <robh+dt@kernel.org> Acked-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-28ARC: [plat-hsdk]: Add support of Vivante GPUEugeniy Paltsev
HSDK board has built-in Vivante GPU IP which works perfectly fine with Etnaviv driver, so let's use it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-28ARC: [plat-hsdk]: enable creg-gpio controllerEugeniy Paltsev
HSDK SOC has CREG GPIO controller which can be used to control SPI chip select lines. Enable it in preparation of enabling SPI peripherals. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-21ARC: [plat-hsdk]: Add missing FIFO size entry in GMAC nodeJose Abreu
Add the binding for RX/TX fifo size of GMAC node. Cc: Joao Pinto <jpinto@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-21ARC: [plat-hsdk]: Add missing multicast filter bins number to GMAC nodeJose Abreu
GMAC controller on HSDK boards supports 256 Hash Table size so we need to add the multicast filter bins property. This allows for the Hash filter to work properly using stmmac driver. Cc: Joao Pinto <jpinto@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-04-02ARC: [hsdk] Make it easier to add PAE40 region to DTBVineet Gupta
1. Bump top level address-cells/size-cells nodes to 2 (to ensure all down stream addresses are 64-bits, unless explicitly specified otherwise (in "soc" bus with all peripherals) 2. "memory" also specified with address/size 2 3. Add a commented reference for PAE40 region beyond 4GB physical address space Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-25ARC: [plat-hsdk]: Enable AXI DW DMAC supportEugeniy Paltsev
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-25ARC: [plat-hsdk]: Add reset controller handle to manage USB resetEugeniy Paltsev
DW USB controller on HSDK hangs sometimes after SW reset, so add reset handle to make possible to reset DW USB controller HW. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-25ARC: DTB: [scripted] fix node name and address spellingAlexey Brodkin
1. Remove "0x" prefix from unit-address of node names ----------------------->8------------------------ sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts* ----------------------->8------------------------ 2. Make all hex addresses lowercase: ----------------------->8------------------------ sed -i 's/@\([0-9A-Za-z]*\)/@\L\1/g' arch/arc/boot/dts/*.dts* sed -i 's/0x\([0-9A-Za-z]*\)/0x\L\1/g' arch/arc/boot/dts/*.dts* ----------------------->8------------------------ Inspired by [1] and the like. [1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/ Reviewed-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-12ARC: [plat-hsdk] Enable DW APB GPIO supportEugeniy Paltsev
Enable GPIO support on HSDK. HSDK SoC includes Synopsys DesignWare DW_apb_gpio IP with 24 GPIOs mapped onto port A. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-08-31ARC: dma [IOC]: mark DMA devices connected as dma-coherentEugeniy Paltsev
Mark DMA devices on AXS103 and HSDK boards connected through IOC port as dma-coherent. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-08-27ARC: [plat-axs*/plat-hsdk]: Allow U-Boot to pass MAC-address to the kernelAlexey Brodkin
Otherwise kernel uses random MAC which is not very conveniet. With that change in place use might set desired MAC in U-Boot with "setenv ethaddr 11:22:33:44:55:66", save environment and then from boot to boot the same MAC will be used by the kernel. One other note for this to happen it's required to pass board's .dtb in U-Boot's "bootm" command like that: ------------------->8----------------- bootm 0x82000000 - 0x84000000 ------------------->8----------------- Here 0x82000000 is location of uImage while 0x80000000 is location of either axs10x.dtb or hsdk.dtb previously loaded from SD-card, USB storage or TFTP server. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: stable@vger.kernel.org # 4.14 Cc: devicetree@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-04-07kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markersMasahiro Yamada
GNU Make automatically deletes intermediate files that are updated in a chain of pattern rules. Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts Example 2) %.o <- %.c <- %.c_shipped A couple of makefiles mark such targets as .PRECIOUS to prevent Make from deleting them, but the correct way is to use .SECONDARY. .SECONDARY Prerequisites of this special target are treated as intermediate files but are never automatically deleted. .PRECIOUS When make is interrupted during execution, it may delete the target file it is updating if the file was modified since make started. If you mark the file as precious, make will never delete the file if interrupted. Both can avoid deletion of intermediate files, but the difference is the behavior when Make is interrupted; .SECONDARY deletes the target, but .PRECIOUS does not. The use of .PRECIOUS is relatively rare since we do not want to keep partially constructed (possibly corrupted) targets. Another difference is that .PRECIOUS works with pattern rules whereas .SECONDARY does not. .PRECIOUS: $(obj)/%.lex.c works, but .SECONDARY: $(obj)/%.lex.c has no effect. However, for the reason above, I do not want to use .PRECIOUS which could cause obscure build breakage. The targets specified as .SECONDARY must be explicit. $(targets) contains all targets that need to include .*.cmd files. So, the intermediates you want to keep are mostly in there. Therefore, mark $(targets) as .SECONDARY. It means primary targets are also marked as .SECONDARY, but I do not see any drawback for this. I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This will make Kbuild search for non-existing .*.cmd files, but this is not a noticeable performance issue. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-02-06arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mbBartosz Golaszewski
Using compatible strings without the <manufacturer> part for at24 is deprecated since commit 6da28acf745f ("dt-bindings: at24: consistently document the compatible property"). Use a correct 'atmel,<model>' value. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-01-18ARC: Enable fatal signals on boot for dev platformsAlexey Brodkin
It's very convenient to have fatal signals enabled on developemnt platform as this allows to catch problems that happen early in user-space (like crashing init or dynamic loader). Otherwise we may either enable it later from alive taregt console by "echo 1 > /proc/sys/kernel/print-fatal-signals" but: 1. We might be unfortunate enough to not reach working console 2. Forget to enable fatal signals and miss something interesting Given we're talking about development platforms here it shouldn't be a problem if a bit more data gets printed to debug console. Moreover this makes behavior of all our dev platforms predictable as today some platforms already have it enabled and some don't - which is way too inconvenient. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20ARC: [plat-axs103]: Set initial core pll output frequencyEugeniy Paltsev
Set initial core pll output frequency specified in device tree to 100MHz for SMP configuration and 90MHz for UP configuration. It will be applied at the core pll driver probing. Update platform quirk for decreasing core frequency for quad core configuration. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20ARC: [plat-hsdk]: Set initial core pll output frequencyEugeniy Paltsev
Set initial core pll output frequency specified in device tree to 1GHz. It will be applied at the core pll driver probing. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-11-25Merge tag 'arc-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - more changes for HS48 cores: supporting MMUv5, detecting new micro-arch gizmos - axs10x platform wiring up reset driver merged in this cycle - ARC perf driver optimizations * tag 'arc-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: avoid vmalloc backed mmap ARCv2: perf: optimize given that num counters <= 32 ARCv2: perf: tweak overflow interrupt ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet reset ARCv2: boot log: updates for HS48: dual-issue, ECC, Loop Buffer ARCv2: Accomodate HS48 MMUv5 by relaxing MMU ver checking ARC: [plat-axs10x] auto-select AXS101 or AXS103 given the ISA config
2017-11-15ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet resetEugeniy Paltsev
DW ethernet controller on axs10x hangs sometimes after SW reset. Invoke the newly aded driver (reset-axs10x.c) by adding the DT bits. With this in place, we don't need the open-coded quirk in platform code, so get rid of it as well ! Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-09kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.libMasahiro Yamada
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom/<soc>/. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08kbuild: clean up *.dtb and *.dtb.S patterns from top-level MakefileMasahiro Yamada
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignoreMasahiro Yamada
Most of DT files are compiled under arch/*/boot/dts/, but we have some other directories, like drivers/of/unittest-data/. We often miss to add gitignore patterns per directory. Since there are no source files that end with .dtb or .dtb.S, we can ignore the patterns globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-11ARC: [plat-hsdk] Increase SDIO CIU frequency to 50000000HzEugeniy Paltsev
With current SDIO CIU clock frequency (12500000Hz) DW MMC controller fails to initialize some SD cards (which don't support slow mode). So increase SDIO CIU frequency from 12500000Hz to 50000000Hz by switching from the default divisor value (div-by-8) to the minimum possible value of the divisor (div-by-2) in HSDK platform code. Reported-by: Vineet Gupta <vgupta@synopsys.com> Tested-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-06ARC: [plat-hsdk]: Add reset controller node to manage ethernet resetEugeniy Paltsev
DW ethernet controller on HSDK hangs sometimes after SW reset, so add reset node to make possible to reset DW ethernet controller HW. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARC: [plat-hsdk] use actual clk driver to manage cpu clkEugeniy Paltsev
With corresponding clk driver now merged upstream, switch to it. - core_clk now represent the PLL (vs. fixed clk before) - input_clk represent the clk signal src for PLL (basically xtal) Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARC: [plat-axs10x] sdio: Temporary fix of sdio ciu frequencyEugeniy Paltsev
DW sdio controller has external ciu clock divider controlled via register in SDIO IP. It divides sdio_ref_clk (which comes from CGU) by 16 for default. So default mmcclk clock (which comes to sdk_in) is 25000000 Hz. So fix wrong current value (50000000 Hz) to actual 25000000 Hz. Note this is a preventive fix, in line with similar change for HSDK where this was actually needed. see: http://lists.infradead.org/pipermail/linux-snps-arc/2017-September/002924.html Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARC: [plat-hsdk] sdio: Temporary fix of sdio ciu frequencyEugeniy Paltsev
DW sdio controller has external ciu clock divider controlled via register in SDIO IP. Due to its unexpected default value (it should divide by 1 but it divides by 8) SDIO IP uses wrong ciu clock and works unstable So add temporary fix and change clock frequency from 100000000 to 12500000 Hz until we fix dw sdio driver itself. Fixes SNPS STAR 9001204800 Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-08Merge tag 'arc-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - Support for HSDK board hosting a Quad core HS38x4 based SoC running @1GHz (and some prerrquisite changes such as ability to scoot the kernel code/data from start of memory map etc) - Quite a few updates for EZChip (Mellanox) platform - Fixes to fault/exception printing * tag 'arc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (26 commits) ARC: Re-enable MMU upon Machine Check exception ARC: Show fault information passed to show_kernel_fault_diag() ARC: [plat-hsdk] initial port for HSDK board ARC: mm: Decouple RAM base address from kernel link address ARCv2: IOC: Tighten up the contraints (specifically base / size alignment) ARC: [plat-axs103] refactor the DT fudging code ARC: [plat-axs103] use clk driver #2: Add core pll node to DT to manage cpu clk ARC: [plat-axs103] use clk driver #1: Get rid of platform specific cpu clk setting ARCv2: SLC: provide a line based flush routine for debugging ARC: Hardcode ARCH_DMA_MINALIGN to max line length we may have ARC: [plat-eznps] handle extra aux regs #2: kernel/entry exit ARC: [plat-eznps] handle extra aux regs #1: save/restore on context switch ARC: [plat-eznps] avoid toggling of DPC register ARC: [plat-eznps] Update the init sequence of aux regs per cpu. ARC: [plat-eznps] new command line argument for HW scheduler at MTM ARC: set boot print log level to PR_INFO ARC: [plat-eznps] Handle user memory error same in simulation and silicon ARC: [plat-eznps] use schd.wft instruction instead of sleep at idle task ARC: create cpu specific version of arch_cpu_idle() ARC: [plat-eznps] spinlock aware for MTM ...
2017-09-01ARC: [plat-hsdk] initial port for HSDK boardAlexey Brodkin
This initial port adds support of ARC HS Development Kit board with some basic features such serial port, USB, SD/MMC and Ethernet. Essentially we run Linux kernel on all 4 cores (i.e. utilize SMP) and heavily use IO Coherency for speeding-up DMA-aware peripherals. Note as opposed to other ARC boards we link Linux kernel to 0x9000_0000 intentionally because cores 1 and 3 configured with DCCM situated at our more usual link base 0x8000_0000. We still can use memory region starting at 0x8000_0000 as we reallocate DCCM in our platform code. Note that PAE remapping for DMA clients does not work due to an RTL bug, so CREG_PAE register must be programmed to all zeroes, otherwise it will cause problems with DMA to/from peripherals even if PAE40 is not used. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: mm: Decouple RAM base address from kernel link addressEugeniy Paltsev
[Needed for HSDK] Currently the first page of system (hence RAM base) is assumed to be @ CONFIG_LINUX_LINK_BASE, where kernel itself is linked. However is case of HSDK platform, for reasons explained in that patch, this is not true. kernel needs to be linked @ 0x9000_0000 while DDR is still wired at 0x8000_0000. To properly account for this 256M of RAM, we need to introduce a new option and base page frame accountiing off of it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: renamed CONFIG_KERNEL_RAM_BASE_ADDRESS => CONFIG_LINUX_RAM_BASE : simplified changelog]
2017-09-01ARC: [plat-axs103] use clk driver #2: Add core pll node to DT to manage cpu clkEugeniy Paltsev
Add core pll node (core_clk) to manage cpu frequency. core_clk represents pll itself. input_clk represents clock signal source (basically xtal) which comes to pll input. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-30arc: remove num-slots from arc platformsShawn Lin
dwmmc driver deprecated num-slots and plan to get rid of it finally. Just move a step to cleanup it from DT. Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Acked-by: Vineet Gupta <Vineet.Gupta1@synopsys.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-04ARC: [plat-axs10x]: prepare dts files for enabling PAE40 on axs103Eugeniy Paltsev
Enable 64bit adressing, where it needed, to make possible enabling PAE40 on axs103. This patch doesn't affect on any functionality. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev-HKixBCOQz3hWk0Htik3J/w@public.gmane.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-04-27arc: axs10x: Fix ARC PGU default clock frequencyJose Abreu
Default clock frequency for ARC PGU does not match any existing HDMI mode, instead the default value matches a DVI mode. Change the clock frequency to 74.25MHz so that it matches HDMI mode 1280x720@60Hz Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: devicetree@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-04-27arc: axs10x: Add DT bindings for I2S audio playbackJose Abreu
This patch adds the necessary DT bindings to get HDMI audio output in ARC AXS10x SDP. The bindings for I2S controller were added as well as the bindings for simple audio card. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: devicetree@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-03-24ARC: vdk: Fix support of UIOAlexey Brodkin
MotherBoard section has its "ranges" set to 0xE000_0000-0xF000_0000. But UIO node maps 4 different areas in different memory locations and all outside MB's ranges. That obviously breaks UIO mappings in runtime. Cc: Ruud Derwig <rderwig@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-03-05ARC: [dts] add cpu nodes to ARCHS SMP device treeVlad Zakharov
Trying to get clock for CPU cores on SMP systems I found that I was only able to get clock for core[0]. That was because only one cpu@0 node was represented in ARC HS device tree and it was impossible to get clock for "non-existing" cores. So as ARC HS may have up to 4 cores we update device tree to match maximum possible cores quantity. Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-03-05ARC: [dts] add input clocks for cpu nodesVlad Zakharov
ARC CPU cores are driven by core_clk so we add corresponding "clocks" property to ARC cpu nodes. Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-02-06ARCv2: intc: Delete useless comments in Device TreesYuriy Kolerov
Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-02-06ARCv2: IDU-intc: Delete deprecated parameters in Device TreesYuriy Kolerov
No need for specifying a list of interrupts in the declaration of IDU interrupt controller anymore since the kernel can obtain a number of supported interrupts from the build register. Also delete support of the second parameter for devices which are connected to IDU because it is not used anywhere. Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 05:09:03 +0000