summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)Author
2018-03-28Merge 4.16-rc7 into staging-nextGreg Kroah-Hartman
We want the IIO and staging driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23Merge tag 'staging-4.16-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO fixes from Greg KH: "Here are a few small staging and IIO fixes for various reported issues. All of them are tiny, the majority being iio driver fixes for small issues, and one staging driver fix for a memory corruption issue. All have been in linux-next with no reported issues" * tag 'staging-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ncpfs: memory corruption in ncp_read_kernel() iio: st_pressure: st_accel: pass correct platform data to init Revert "iio: accel: st_accel: remove redundant pointer pdata" iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock() dt-bindings: iio: adc: sd-modulator: fix io-channel-cells iio: adc: stm32-dfsdm: fix multiple channel initialization iio: adc: stm32-dfsdm: fix clock source selection iio: adc: stm32-dfsdm: fix call to stop channel iio: adc: stm32-dfsdm: fix compatible data use iio: chemical: ccs811: Corrected firmware boot/application mode transition
2018-03-22Merge tag 'drm-fixes-for-v4.16-rc7' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "A bunch of fixes all over the place (core, i915, amdgpu, imx, sun4i, ast, tegra, vmwgfx), nothing too serious or worrying at this stage. - one uapi fix to stop multi-planar images with getfb - Sun4i error path and clock fixes - udl driver mmap offset fix - i915 DP MST and GPU reset fixes - vmwgfx mutex and black screen fixes - imx array underflow fix and vblank fix - amdgpu: display fixes - exynos devicetree fix - ast mode fix" * tag 'drm-fixes-for-v4.16-rc7' of git://people.freedesktop.org/~airlied/linux: (29 commits) drm/ast: Fixed 1280x800 Display Issue drm: udl: Properly check framebuffer mmap offsets drm/i915: Specify which engines to reset following semaphore/event lockups drm/vmwgfx: Fix a destoy-while-held mutex problem. drm/vmwgfx: Fix black screen and device errors when running without fbdev drm: Reject getfb for multi-plane framebuffers drm/amd/display: Add one to EDID's audio channel count when passing to DC drm/amd/display: We shouldn't set format_default on plane as atomic driver drm/amd/display: Fix FMT truncation programming drm/amd/display: Allow truncation to 10 bits drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()' drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()' drm/i915/dp: Write to SET_POWER dpcd to enable MST hub. drm/amd/display: fix dereferencing possible ERR_PTR() drm/amd/display: Refine disable VGA drm/tegra: Shutdown on driver unbind drm/tegra: dsi: Don't disable regulator on ->exit() drm/tegra: dc: Detach IOMMU group from domain only once dt-bindings: exynos: Document #sound-dai-cells property of the HDMI node drm/imx: move arming of the vblank event to atomic_flush ...
2018-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Always validate XFRM esn replay attribute, from Florian Westphal. 2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long. 3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul Triebitz. 4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel Axtens. 5) Fix some interrupt handling issues in e1000e driver, from Benjamin Poitier. 6) Use strlcpy() in several ethtool get_strings methods, from Florian Fainelli. 7) Fix rhlist dup insertion, from Paul Blakey. 8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev. 9) Fix driver unload crash when link is up in smsc911x, from Jeremy Linton. 10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric Dumazet. 11) Need to purge the write queue when TCP connections are aborted, otherwise userspace using MSG_ZEROCOPY can't close the fd. From Soheil Hassas Yeganeh. 12) Fix double free in error path of team driver, from Arkadi Sharshevsky. 13) Filter fixes for hv_netvsc driver, from Stephen Hemminger. 14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo Bianconi. 15) Properly filter out unsupported feature flags in macvlan driver, from Shannon Nelson. 16) Don't request loading the diag module for a protocol if the protocol itself is not even registered. From Xin Long. 17) If datagram connect fails in ipv6, make sure the socket state is consistent afterwards. From Paolo Abeni. 18) Use after free in qed driver, from Dan Carpenter. 19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the entry. From Sabrina Dubroca. 20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins. 21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita. 22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel. 23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti. 24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli. 25) Memory leak in gemini driver, from Igor Pylypiv. 26) IDR leaks in error paths of tcf_*_init() functions, from Davide Caratti. 27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun. 28) Missing dev_put() in error path of macsec_newlink(), from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits) macsec: missing dev_put() on error in macsec_newlink() net: dsa: Fix functional dsa-loop dependency on FIXED_PHY hv_netvsc: common detach logic hv_netvsc: change GPAD teardown order on older versions hv_netvsc: use RCU to fix concurrent rx and queue changes hv_netvsc: disable NAPI before channel close net/ipv6: Handle onlink flag with multipath routes ppp: avoid loop in xmit recursion detection code ipv6: sr: fix NULL pointer dereference when setting encap source address ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state net: aquantia: driver version bump net: aquantia: Implement pci shutdown callback net: aquantia: Allow live mac address changes net: aquantia: Add tx clean budget and valid budget handling logic net: aquantia: Change inefficient wait loop on fw data reads net: aquantia: Fix a regression with reset on old firmware net: aquantia: Fix hardware reset when SPI may rarely hangup s390/qeth: on channel error, reject further cmd requests s390/qeth: lock read device while queueing next buffer s390/qeth: when thread completes, wake up all waiters ...
2018-03-21Merge tag 'exynos-drm-fixes-for-v4.16-rc6' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Add a device tree property description for hdmi device node . '#sound-dai-cells' property is required to describe link between the HDMI IP block and the SoC's audio subsystem and Exynos SoC device tree files already have this property but we missed its description. * tag 'exynos-drm-fixes-for-v4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: dt-bindings: exynos: Document #sound-dai-cells property of the HDMI node
2018-03-19Merge tag 'iio-fixes-for-4.16b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second set of IIO fixes for the 4.16 cycle. A slightly fiddly revert then fix pair in here as the bug lead to an unused local variable that was then removed without us noticing the bug. The revert should only be needed on 4.16 - the fix goes back futher. * ccs811 - Fix the transition from 'boot' to 'application' mode. Fixes the case where the power is not cut between boot cycles. * meson-saradc - Fix missing mutex_unlock in an error path. * sd-modulator - Fix bindings doc to have the right value of io-channel-cells to reflect that this device type only ever outputs one channel. * st-accel - Revert drop of redundant pointer patch. - Use the now available pointer to avoid overwriting the platform data pointer and causing trouble on reprobing the driver. * st-pressure - Use local copy of the platform data pointer to avoid overwriting the one associated with the device, which would cause issues on reprobing the driver. * stm32-dfsdm - Use the right regmap_cfg for the type of device. - Correct the ID passed to stop channel to be the channel one. - Correct which clock is used to allow for the 'audio' clock. - Fix allocation of channels when more than one is enabled.
2018-03-19Merge 4.16-rc6 into staging-nextGreg Kroah-Hartman
We want the staging fixes in here as well to handle merge/test issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19dt-bindings: exynos: Document #sound-dai-cells property of the HDMI nodeSylwester Nawrocki
The #sound-dai-cells DT property is required to describe link between the HDMI IP block and the SoC's audio subsystem. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-03-16net: dsa: mv88e6xxx: Fix binding documentation for MDIO bussesAndrew Lunn
The MDIO busses are switch properties and so should be inside the switch node. Fix the examples in the binding document. Reported-by: 尤晓杰 <yxj790222@163.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14Merge tag 'usb-4.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a small clump of USB fixes for 4.16-rc6. Nothing major, just a number of fixes in lots of different drivers, as well as a PHY driver fix that snuck into this tree. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) usb: musb: Fix external abort in musb_remove on omap2430 phy: qcom-ufs: add MODULE_LICENSE tag usb: typec: tcpm: fusb302: Do not log an error on -EPROBE_DEFER USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM usbip: vudc: fix null pointer dereference on udc->lock xhci: Fix front USB ports on ASUS PRIME B350M-A usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing" usb: usbmon: Read text within supplied buffer size usb: host: xhci-rcar: add support for r8a77965 USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h usb: xhci: dbc: Fix lockdep warning xhci: fix endpoint context tracer output Revert "typec: tcpm: Only request matching pdos" usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers usb: quirks: add control message delay for 1b1c:1b20 uas: fix comparison for error code usb: gadget: udc: renesas_usb3: add binging for r8a77965 usb: renesas_usbhs: add binding for r8a77965 usb: dwc2: fix STM32F7 USB OTG HS compatible dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding ...
2018-03-14dt-bindings: soc: Add a binding for the Broadcom VCHIQ services. (v3)Eric Anholt
The VCHIQ communication channel can be provided by BCM283x and Capri SoCs, to communicate with the VPU-side OS services. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14Merge tag 'iio-for-4.17b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new device support, features and cleanup for IIO in the 4.17 cycle The uptick in staging cleanup is partly due to GSoC Applications process being underway and one of Daniel's tasks being to try cleaning up an IIO driver to move out of staging. Naturally there is some normal staging cleanup progress in here as well. New device support * Microchip mcp4018 - New driver supproting MCP4017, MCP4018 and MCP4019 digital pots. * On Semiconductor lv0104cs - New driver to support this ambient light sensor. Cleanup * axp20x_adc - remove a !! in favour of clear ternary operator. * ad2s1210 (staging cleanup) - Reorganise to avoid ending a line with [ - Remove some unnecessary defines. - Remove unsed variable. * ad5380 - Replace magic 0 with IIO_CHAN_INFO_RAW * ad5764 - Replace magic 0 with IIO_CHA_INFO_RAW * ad7150 (staging cleanup) - Align arguements with parenthesis. * ad7152 (staging cleanup) - Align arguements. * ad7746 (staging cleanup) - Align arguements. * ad7816 - Remove pointless void pointer cast. * ade7753 - Replace IIO_DEV_ATTR_CH_OFF with equivalent to avoid confusing checkpatch (this macro didn't really help anyway). Also drop the macro from the meter.h header. * ade7754 (staging cleanup) - Add names to funciton definition arguements. - Align arguements with open parenthesis where possible. * ade7758 (staging cleanup) - Remove __func__ from dev_dbg statements as provided by dynamic debug anyway. - Align arguements with open parenthesis where possible. * ade7759 (staging cleanup) - Replace IIO_DEV_ATTR_CH_OFF with equiavalent to avoid confusing checkpatch. * adis16201 (staging cleanup) - Headers in alphabetical order. - Blank lines before returns. * adis16209 (staging cleanup) - Headers in alphabetical order - Change some definition names to make them more meaningful (2 rounds of this). - Add explicit _REG prefix to register names to make them obviously different from fields within those registers. - Remove some superflous comments and group definitions better. - Use a switch statement to make it semantically obvious that we only have two options (rather than an unlimited 'else'). - Use sign_extent32 instead of open coding. * adt7316 (staging cleanup) - Move an export next to symbol. * bmc150 - drop redundant __func__ in dynamic debug. * ccs811 - Rename varaible to better reflect what it does. * cros_ec - Reduce sampling frequency before suspending to avoid preventing suspend. * dummy - Correct whitespace in Kconfig. - Add extra description in Kconfig. * ds1803 - Remove a VLA which we always know is 2 long. * hid-sensor-accel - Replace magic number 0 by IIO_CHAN_INFO_RAW. * hid-sensor-gyro - Replace magic number 0 by IIO_CHAN_INFO_RAW. * hid-sensor-light - Replace magic number 0 by IIO_CHAN_INFO_RAW. * hid-sensor-magn - Replace magic number 0 by IIO_CHAN_INFO_RAW. * lm3533 - Replace magic number 0 by IIO_CHAN_INFO_RAW * mlx90632 - Squash a smatch warning - no runtime effect. * stm32_dfsdm: - Cleanup the dt bindings. * sx9500 - Add GPIO ACPI mapping table to behave correctly when firmware doesn't provide the mapping. * tsl2x7x (staging cleanup) - Fix the proximity sensor functionality. - Remove platform data provided power functions. There are much better ways to do this these days. - Introduce some common functions to avoid various repititions. - Stop using mutex_trylock when mutex_lock and wait a bit is fine. - Improve error handling in various places. - Drop some 'Camel case' (which wasn't actually strickly camel case but was a bit odd. - Drop some _available sysfs attributes for things that don't exist (for particular supported parts).
2018-03-11Merge tag 'dmaengine-fix-4.16-rc5' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Two small fixes are for this cycle: - fix max_chunk_size for rcar-dmac for R-Car Gen3 - fix clock resource of mv_xor_v2" * tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: mv_xor_v2: Fix clock resource by adding a register clock dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3
2018-03-11dmaengine: mv_xor_v2: Fix clock resource by adding a register clockGregory CLEMENT
On the CP110 components which are present on the Armada 7K/8K SoC we need to explicitly enable the clock for the registers. However it is not needed for the AP8xx component, that's why this clock is optional. With this patch both clock have now a name, but in order to be backward compatible, the name of the first clock is not used. It allows to still use this clock with a device tree using the old binding. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-08usb: host: xhci-rcar: add support for r8a77965Yoshihiro Shimoda
This patch adds support for r8a77965 (R-Car M3-N). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-07dt-bindings: net: renesas-ravb: Make stream buffer optionalGeert Uytterhoeven
The Stream Buffer for EtherAVB-IF (STBE) is an optional component, and is not present on all SoCs. Document this in the DT bindings, including a list of SoCs that do have it. Fixes: 785ec87483d1e24a ("ravb: document R8A77970 bindings") Fixes: f231c4178a655b09 ("dt-bindings: net: renesas-ravb: Add support for R8A77995 RAVB") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Use an appropriate TSQ pacing shift in mac80211, from Toke Høiland-Jørgensen. 2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk in ip6_route_me_harder, from Eric Dumazet. 3) Fix several shutdown races and similar other problems in l2tp, from James Chapman. 4) Handle missing XDP flush properly in tuntap, for real this time. From Jason Wang. 5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel Borkmann. 6) Fix phy_resume() locking, from Andrew Lunn. 7) IFLA_MTU values are ignored on newlink for some tunnel types, fix from Xin Long. 8) Revert F-RTO middle box workarounds, they only handle one dimension of the problem. From Yuchung Cheng. 9) Fix socket refcounting in RDS, from Ka-Cheong Poon. 10) Don't allow ppp unit registration to an unregistered channel, from Guillaume Nault. 11) Various hv_netvsc fixes from Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits) hv_netvsc: propagate rx filters to VF hv_netvsc: filter multicast/broadcast hv_netvsc: defer queue selection to VF hv_netvsc: use napi_schedule_irqoff hv_netvsc: fix race in napi poll when rescheduling hv_netvsc: cancel subchannel setup before halting device hv_netvsc: fix error unwind handling if vmbus_open fails hv_netvsc: only wake transmit queue if link is up hv_netvsc: avoid retry on send during shutdown virtio-net: re enable XDP_REDIRECT for mergeable buffer ppp: prevent unregistered channels from connecting to PPP units tc-testing: skbmod: fix match value of ethertype mlxsw: spectrum_switchdev: Check success of FDB add operation net: make skb_gso_*_seglen functions private net: xfrm: use skb_gso_validate_network_len() to check gso sizes net: sched: tbf: handle GSO_BY_FRAGS case in enqueue net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len rds: Incorrect reference counting in TCP socket creation net: ethtool: don't ignore return from driver get_fecparam method vrf: check forwarding on the original netdevice when generating ICMP dest unreachable ...
2018-03-05usb: gadget: udc: renesas_usb3: add binging for r8a77965Yoshihiro Shimoda
This patch adds binding for r8a77965 (R-Car M3-N). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-05usb: renesas_usbhs: add binding for r8a77965Yoshihiro Shimoda
This patch adds binding for r8a77965 (R-Car M3-N). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-05dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core bindingAmelie Delaunay
This patch fixes binding documentation for DWC2 controller in HS mode found on STMicroelectronics STM32F7 SoC. The v2 former patch [1] had been acked by Rob Herring, but v1 was merged. [1] https://patchwork.kernel.org/patch/9925575/ Fixes: 000777dadc7e ("dt-bindings: usb: Document the STM32F7xx DWC2 ...") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-04Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixlet from Thomas Gleixner: "Just a documentation update for the missing device tree property of the R-Car M3N interrupt controller" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings/irqchip/renesas-irqc: Document R-Car M3-N support
2018-03-03Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A driver fix and a documentation fix (which makes dependency handling for the next cycle easier)" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: octeon: Prevent error message on bus error dt-bindings: at24: sort manufacturers alphabetically
2018-03-03dt-bindings: iio: adc: stm32-dfsdm: fix types, add missing pinctrlFabrice Gasnier
- Add missing pinctrl description. Support is made optional as dfsdm may use internal sources (e.g. via registers) - Fix typo in IIO STM32 DFSDM filter "MANCH_F" description. Basically, this should be "falling edge = logic 0", not "1" that applies to "MANCH_R". BTW, make the description complete by describing both rising/falling edges as described in reference manuals. Fixes: 6c82f947fc97 ("IIO: add DT bindings for stm32 DFSDM filter") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-28dt-bindings/irqchip/renesas-irqc: Document R-Car M3-N supportGeert Uytterhoeven
Document support for the Interrupt Controller for Externel Devices (INTC-EX) in the Renesas M3-N (r8a77965) SoC. No driver update is needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-renesas-soc@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Link: https://lkml.kernel.org/r/1519658712-22910-1-git-send-email-geert%2Brenesas@glider.be
2018-02-28Merge tag 'devicetree-fixes-for-4.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - update i.MX thermal binding example to use current binding, not the deprecated one - move arm-charlcd to auxdisplay/ - fix misspelling of "debounce-interval" * tag 'devicetree-fixes-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: power: Fix "debounce-interval" property misspelling auxdisplay: Move arm-charlcd binding to correct folder dt-bindings: thermal: imx: update the binding to new method
2018-02-28dt-bindings: at24: sort manufacturers alphabeticallyPeter Rosin
Makes them easier to find. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-02-26DT: net: renesas,ravb: document R8A77980 bindingsSergei Shtylyov
Renesas R-Car V3H (R8A77980) SoC has the R-Car gen3 compatible EtherAVB device, so document the SoC specific bindings. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26Merge 4.16-rc3 into staging-nextGreg Kroah-Hartman
We want the IIO/Staging fixes in here, and to resolve a merge problem with the move of the fsl-mc code. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-24dt-bindings: iio: adc: sd-modulator: fix io-channel-cellsFabrice Gasnier
io-channel-cells should be <0> since sigma delta modulator exports only one channel, as described in ../iio/iio-bindings.txt "IIO providers" section. Only the phandle is necessary for IIO consumers in this case. Fixes: af11143757b7 ("IIO: Add DT bindings for sigma delta adc modulator") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-20Merge tag 'iio-for-4.17a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of new devices, features and cleanups for IIO in the 4.17 cycle. Outside of IIO * Strongly typed 64bit int_sqrt function needed by the mlx90632 New device support * adc081s - New driver supporting adc081s, adc101s and adc121s TI ADCs. * ad5272 - New driver supproting the ad5272 and ad5274 ADI digital potentiometers with DT bindings. * axp20x_adc - support the AXP813 ADC - includes rework patches to prepare for this. * mlx90632 - New driver with dt bindings for this IR temperature sensor. Features * axp20x_adc - Add DT bindings and probing. * dht11 - The sensor has a wider range than advertised in the datasheet - support it. * st_lsm6dsx - Add hardware timestamp su9pport. Cleanups * ABI docs - Update email contact for Matt Ranostay * SPDX changes - Matt Ranostay has moved his drivers over to SPDX. Currently we are making this an author choice in IIO. * ad7192 - Disable burnout current on misconfiguration. No actually effect as they simply won't work otherwise. * ad7476 - Drop a license definition that was replicating information in SPDX tag. * ade7758 - Expand buf_lock to cover both buffer and state protection allowing unintented uses of mlock in the core to be removed. * ade7759 - Align parameters to opening parenthesis. * at91_adc - Depend on sysfs instead of selecting it - for try wide consistency. * ccs811 - trivial naming type for a define. * ep93xx - Drop a redundant return as a result checking platform_get_resource. * hts221 - Regmap conversion which simplifies the driver somewhat. - Clean up some restricted endian cast warnings. - Drop a trailing whitespace from a comment - Drop an unnecessary get_unaligned by changing to the right 16bit data type. * ms5611 - Fix coding style in the probe function (whitespace) * st_accel - Use strlcpy instead of strncpy to avoid potentially truncating a string.
2018-02-18dt-bindings: power: Fix "debounce-interval" property misspellingGeert Uytterhoeven
"debounce_interval" was never supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-02-13Merge tag 'mips_4.16_2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fix from James Hogan: "A single change (and associated DT binding update) to allow the address of the MIPS Cluster Power Controller (CPC) to be chosen by DT, which allows SMP to work on generic MIPS kernels where the bootloader hasn't configured the CPC address (i.e. the new Ranchu platform)" * tag 'mips_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: CPC: Map registers using DT in mips_cpc_default_phys_base() dt-bindings: Document mti,mips-cpc binding
2018-02-12auxdisplay: Move arm-charlcd binding to correct folderAndy Shevchenko
This is a follow up to the commit 00846a4425d3 ("auxdisplay: Move arm-charlcd.c to drivers/auxdisplay folder") for Device Tree binding. No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-02-12dt-bindings: thermal: imx: update the binding to new methodDong Aisheng
Due to the old method has already been marked as deprecated in binding doc, so obviously it's better to update the example to new bindings as well. Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-02-10dt-bindings: ad5272: Add bindings for Analog Devices digital potentiometersPhil Reid
Add binding documentation for Analog Devices AD5272 and AD5274 digital potentiometer devices. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-08Merge tag 'iommu-updates-v4.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "This time there are not a lot of changes coming from the IOMMU side. That is partly because I returned from my parental leave late in the development process and probably partly because everyone was busy with Spectre and Meltdown mitigation work and didn't find the time for IOMMU work. So here are the few changes that queued up for this merge window: - 5-level page-table support for the Intel IOMMU. - error reporting improvements for the AMD IOMMU driver - additional DT bindings for ipmmu-vmsa (Renesas) - small fixes and cleanups" * tag 'iommu-updates-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Clean up of_iommu_init_fn iommu/ipmmu-vmsa: Remove redundant of_iommu_init_fn hook iommu/msm: Claim bus ops on probe iommu/vt-d: Enable 5-level paging mode in the PASID entry iommu/vt-d: Add a check for 5-level paging support iommu/vt-d: Add a check for 1GB page support iommu/vt-d: Enable upto 57 bits of domain address width iommu/vt-d: Use domain instead of cache fetching iommu/exynos: Don't unconditionally steal bus ops iommu/omap: Fix debugfs_create_*() usage iommu/vt-d: clean up pr_irq if request_threaded_irq fails iommu: Check the result of iommu_group_get() for NULL iommu/ipmmu-vmsa: Add r8a779(70|95) DT bindings iommu/ipmmu-vmsa: Add r8a7796 DT binding iommu/amd: Set the device table entry PPR bit for IOMMU V2 devices iommu/amd - Record more information about unknown events
2018-02-08dt-bindings: Document mti,mips-cpc bindingPaul Burton
Document a binding for the MIPS Cluster Power Controller (CPC) that allows the device tree to specify where the CPC registers are located. Signed-off-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18512/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-02-07Merge tag 'linux-watchdog-4.16-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - new watchdog device drivers for Realtek RTD1295 and Spreadtrum SC9860 platform - add support for the following devices: jz4780 SoC, AST25xx series SoC and r8a77970 SoC - convert to watchdog framework: i6300esb_wdt, xen_wdt and sp5100_tco - several fixes for watchdog core - remove at32ap700x and obsolete documentation - gpio: Convert to use GPIO descriptors - rename gemini into FTWDT010 as this IP block is generc from Faraday Technology - various clean-ups and small bugfixes - add Guenter Roeck as co-maintainer - change maintainers e-mail address * tag 'linux-watchdog-4.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (74 commits) documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt documentation: watchdog: remove documentation for ixp2000 documentation: watchdog: remove documentation of at32ap700x_wdt watchdog: remove at32ap700x_wdt watchdog: sp5100_tco: Add support for recent FCH versions watchdog: sp5100-tco: Abort if watchdog is disabled by hardware watchdog: sp5100_tco: Use bit operations watchdog: sp5100_tco: Convert to use watchdog subsystem watchdog: sp5100_tco: Clean up function and variable names watchdog: sp5100_tco: Use dev_ print functions where possible watchdog: sp5100_tco: Match PCI device early watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice watchdog: sp5100_tco: Use standard error codes watchdog: sp5100_tco: Use request_muxed_region where possible watchdog: sp5100_tco: Fix watchdog disable bit watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG} watchdog: core: make sure the watchdog_worker is not deferred watchdog: mt7621: switch to using managed devm_watchdog_register_device() watchdog: mt7621: set WDOG_HW_RUNNING bit when appropriate watchdog: imx2_wdt: restore previous timeout after suspend+resume ...
2018-02-07Merge tag 'mips_4.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.16. Rough overview: (1) Basic support for the Ingenic JZ4770 based GCW Zero open-source handheld video game console (2) Support for the Ranchu board (used by Android emulator) (3) Various cleanups and misc improvements More detailed summary: Fixes: - Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9) - Fix vmlinuz default build when ZBOOT selected - Fix clean up of vmlinuz targets - Fix command line duplication (in preparation for Ingenic JZ4770) Miscellaneous: - Allow Processor ID reads to be to be optimised away by the compiler (improves performance when running in guest) - Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to disable on generic platform with Ranchu board support - Add helpers for assembler macro instructions for older assemblers - Use assembler macro instructions to support VZ, XPA & MSA operations on older assemblers, removing C wrapper duplication - Various improvements to VZ & XPA assembly wrappers - Add drivers/platform/mips/ to MIPS MAINTAINERS entry Minor cleanups: - Misc FPU emulation cleanups (removal of unnecessary include, moving macros to common header, checkpatch and sparse fixes) - Remove duplicate assignment of core in play_dead() - Remove duplication in watchpoint handling - Remove mips_dma_mapping_error() stub - Use NULL instead of 0 in prepare_ftrace_return() - Use proper kernel-doc Return keyword for __compute_return_epc_for_insn() - Remove duplicate semicolon in csum_fold() Platform support: Broadcom: - Enable ZBOOT on BCM47xx Generic platform: - Add Ranchu board support, used by Android emulator - Fix machine compatible string matching for Ranchu - Support GIC in EIC mode Ingenic platforms: - Add DT, defconfig and other support for JZ4770 SoC and GCW Zero - Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780) - Add Ingenic JZ4770 CGU clocks - General Ingenic clk changes to prepare for JZ4770 SoC support - Use common command line handling code - Add DT vendor prefix to GCW (Game Consoles Worldwide) Loongson: - Add MAINTAINERS entry for Loongson2 and Loongson3 platforms - Drop 32-bit support for Loongson 2E/2F devices - Fix build failures due to multiple use of 'MEM_RESERVED'" * tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (53 commits) MIPS: Malta: Sanitize mouse and keyboard configuration. MIPS: Update defconfigs after previous patch. MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level MIPS: SMP-CPS: Remove duplicate assignment of core in play_dead MIPS: Generic: Support GIC in EIC mode MIPS: generic: Fix Makefile alignment MIPS: generic: Fix ranchu_of_match[] termination MIPS: generic: Fix machine compatible matching MIPS: Loongson fix name confict - MEM_RESERVED MIPS: bcm47xx: enable ZBOOT support MIPS: Fix trailing semicolon MIPS: Watch: Avoid duplication of bits in mips_read_watch_registers MIPS: Watch: Avoid duplication of bits in mips_install_watch_registers. MIPS: MSA: Update helpers to use new asm macros MIPS: XPA: Standardise readx/writex accessors MIPS: XPA: Allow use of $0 (zero) to MTHC0 MIPS: XPA: Use XPA instructions in assembly MIPS: VZ: Pass GC0 register names in $n format MIPS: VZ: Update helpers to use new asm macros ...
2018-02-06Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - fix a race condition issue in power allocator governor (Yi Zeng). - add support for AP806 and CP110 in armada thermal driver, together with several improvements (Baruch Siach, Miquel Raynal) - add support for r8z7743 in rcar thermal driver (Biju Das) - convert thermal core to use new hwmon API to avoid warning (Fabio Estevam) - small fixes and cleanups in thermal core and x86_pkg_thermal, int3400_thermal, hisi_thermal, mtk_thermal and imx_thermal drivers (Pravin Shedge, Geert Uytterhoeven, Alexey Khoroshilov, Brian Bian, Matthias Brugger, Nicolin Chen, Uwe Kleine-König) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) thermal: thermal_hwmon: Convert to hwmon_device_register_with_info() thermal/x86 pkg temp: Remove debugfs_create_u32() casts thermal: int3400_thermal: fix error handling in int3400_thermal_probe() thermal/drivers/hisi: Remove bogus const from function return type thermal: armada: Give meaningful names to the thermal zones thermal: armada: Wait sensors validity before exiting the init callback thermal: armada: Change sensors trim default value thermal: armada: Update Kconfig and module description thermal: armada: Add support for Armada CP110 thermal: armada: Add support for Armada AP806 thermal: armada: Use real status register name thermal: armada: Clarify control registers accesses thermal: armada: Simplify the check of the validity bit thermal: armada: Use msleep for long delays dt-bindings: thermal: Describe Armada AP806 and CP110 dt-bindings: thermal: rcar: Add device tree support for r8a7743 thermal: mtk: Cleanup unused defines thermal: imx: update to new formula according to NXP AN5215 thermal: imx: use consistent style to write temperatures thermal: imx: improve comments describing algorithm for temp calculation ...
2018-02-06Merge tag 'media/v4.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - videobuf2 was moved to a media/common dir, as it is now used by the DVB subsystem too - Digital TV core memory mapped support interface - new sensor driver: ov7740 - several improvements at ddbridge driver - new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel SoCs - new tuner driver: tda18250 - finally got rid of all LIRC staging drivers - as we don't have old lirc drivers anymore, restruct the lirc device code - add support for UVC metadata - add a new staging driver for NVIDIA Tegra Video Decoder Engine - DVB kAPI headers moved to include/media - synchronize the kAPI and uAPI for the DVB subsystem, removing the gap for non-legacy APIs - reduce the kAPI gap for V4L2 - lots of other driver enhancements, cleanups, etc. * tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits) media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32 media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32 media: v4l2-compat-ioctl32.c: avoid sizeof(type) media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32 media: v4l2-compat-ioctl32.c: fix the indentation media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF media: v4l2-ioctl.c: don't copy back the result for -ENOTTY media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt media: vivid: fix module load error when enabling fb and no_error_inj=1 media: dvb_demux: improve debug messages media: dvb_demux: Better handle discontinuity errors media: cxusb, dib0700: ignore XC2028_I2C_FLUSH media: ts2020: avoid integer overflows on 32 bit machines media: i2c: ov7740: use gpio/consumer.h instead of gpio.h media: entity: Add a nop variant of media_entity_cleanup ...
2018-02-06Merge tag 'pci-v4.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-02-05Merge tag 'pwm/for-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The Meson PWM controller driver gains support for the AXG series and a minor bug is fixed for the STMPE driver. To round things off, the class is now set for PWM channels exported via sysfs which allows non-root access, provided that the system has been configured accordingly" * tag 'pwm/for-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: meson: Add clock source configuration for Meson-AXG dt-bindings: pwm: Update bindings for the Meson-AXG pwm: stmpe: Fix wrong register offset for hwpwm=2 case pwm: Set class for exported channels in sysfs
2018-02-04Merge tag 'mailbox-v4.16' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: "Misc driver changes only: - TI-MsgMgr: Fix print format for a printk - TI-MSgMgr: SPDX license switch for the driver - QCOM-IPC: Convert driver to use regmap - QCOM-IPC: Spawn sibling clock device from mailbox driver" * tag 'mailbox-v4.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: Document the APCS clock binding mailbox: qcom: Create APCS child device for clock controller mailbox: qcom: Convert APCS IPC driver to use regmap mailbox: ti-msgmgr: Use %zu for size_t print format mailbox: ti-msgmgr: Switch to SPDX Licensing
2018-02-04Merge branch 'i2c/for-4.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has the following changes for you: - new flag to mark DMA safe buffers in i2c_msg. Also, some infrastructure around it. And docs. - huge refactoring of the at24 driver led by the new maintainer Bartosz - update I2C bus recovery to send STOP after recovery - conversion from gpio to gpiod for I2C bus recovery - adding a fault-injector to the i2c-gpio driver - lots of small driver improvements, and bigger ones to i2c-sh_mobile" * 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits) i2c: mv64xxx: Add myself as maintainer for this driver i2c: mv64xxx: Fix clock resource by adding an optional bus clock i2c: mv64xxx: Remove useless test before clk_disable_unprepare i2c: mxs: use true and false for boolean values i2c: meson: update doc description to fix build warnings i2c: meson: add configurable divider factors dt-bindings: i2c: update documentation for the Meson-AXG i2c: imx-lpi2c: add runtime pm support i2c: rcar: fix some trivial typos in comments i2c: davinci: fix the cpufreq transition i2c: rk3x: add proper kerneldoc header i2c: rk3x: account for const type of of_device_id.data i2c: acorn: remove outdated path from file header i2c: acorn: add MODULE_LICENSE tag i2c: rcar: implement bus recovery i2c: send STOP after successful bus recovery i2c: ensure SDA is released in recovery if SDA is controllable i2c: add 'set_sda' to bus_recovery_info i2c: add identifier in declarations for i2c_bus_recovery i2c: make kerneldoc about bus recovery more precise ...
2018-02-04dt-bindings: iio: temperature: add MLX90632 device bindingsCrt Mori
Add device tree bindings for MLX90632 IR temperature sensor. Signed-off-by: Crt Mori <cmo@melexis.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-04dt-bindings: mailbox: qcom: Document the APCS clock bindingGeorgi Djakov
Update the binding documentation for APCS to mention that the APCS hardware block also expose a clock controller functionality. The APCS clock controller is a mux and half-integer divider. It has the main CPU PLL as an input and provides the clock for the application CPU. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-02-02Merge tag 'pinctrl-v4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ...
2018-02-02Merge tag 'rtc-4.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Not much this cycle. I've pushed the at32ap700x removal late but it is unlikely to cause any issues. Summary: Subsystem: - Move ABI documentation to Documentation/ABI New driver: - NXP i.MX53 SRTC - Chrome OS EC RTC Drivers: - Remove at32ap700x - Many fixes in various error paths" * tag 'rtc-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: remove rtc-at32ap700x Documentation: rtc: move iotcl interface documentation to ABI Documentation: rtc: add sysfs file permissions Documentation: rtc: move sysfs documentation to ABI rtc: mxc_v2: remove __exit annotation rtc: mxc_v2: Remove unnecessary platform_get_resource() error check rtc: add mxc driver for i.MX53 SRTC dt-bindings: rtc: add bindings for i.MX53 SRTC rtc: r7301: Fix a possible sleep-in-atomic bug in rtc7301_set_time rtc: r7301: Fix a possible sleep-in-atomic bug in rtc7301_read_time rtc: omap: fix unbalanced clk_prepare_enable/clk_disable_unprepare rtc: ac100: Fix multiple race conditions rtc: sun6i: ensure rtc is kfree'd on error rtc: cros-ec: add cros-ec-rtc driver. mfd: cros_ec: Introduce RTC commands and events definitions. rtc: stm32: Fix copyright rtc: Remove unused RTC_DEVICE_NAME_SIZE rtc: r9701: Remove r9701_remove function rtc: brcmstb-waketimer: fix error handling in brcmstb_waketmr_probe()
2018-02-02Merge tag 'powerpc-4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Enable support for memory protection keys aka "pkeys" on Power7/8/9 when using the hash table MMU. - Extend our interrupt soft masking to support masking PMU interrupts as well as "normal" interrupts, and then use that to implement local_t for a ~4x speedup vs the current atomics-based implementation. - A new driver "ocxl" for "Open Coherent Accelerator Processor Interface (OpenCAPI)" devices. - Support for new device tree properties on PowerVM to describe hotpluggable memory and devices. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit VDSO. - Freescale updates from Scott: fixes for CPM GPIO and an FSL PCI erratum workaround, plus a minor cleanup patch. As well as quite a lot of other changes all over the place, and small fixes and cleanups as always. Thanks to: Alan Modra, Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Anton Blanchard, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Bhaktipriya Shridhar, Bryant G. Ly, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Cyril Bur, David Gibson, Desnes A. Nunes do Rosario, Dmitry Torokhov, Frederic Barrat, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo A. R. Silva, Gustavo Romero, Ivan Mikhaylov, Joakim Tjernlund, Joe Perches, Josh Poimboeuf, Juan J. Alvarez, Julia Cartwright, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud, Ram Pai, Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee, Simon Guo, Stewart Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann, Vaibhav Jain, Vasyl Gomonovych" * tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (199 commits) powerpc/mm/radix: Fix build error when RADIX_MMU=n macintosh/ams-input: Use true and false for boolean values macintosh: change some data types from int to bool powerpc/watchdog: Print the NIP in soft_nmi_interrupt() powerpc/watchdog: regs can't be null in soft_nmi_interrupt() powerpc/watchdog: Tweak watchdog printks powerpc/cell: Remove axonram driver rtc-opal: Fix handling of firmware error codes, prevent busy loops powerpc/mpc52xx_gpt: make use of raw_spinlock variants macintosh/adb: Properly mark continued kernel messages powerpc/pseries: Fix cpu hotplug crash with memoryless nodes powerpc/numa: Ensure nodes initialized for hotplug powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes powerpc/kernel: Block interrupts when updating TIDR powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn powerpc/mm/nohash: do not flush the entire mm when range is a single page powerpc/pseries: Add Initialization of VF Bars powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV powerpc/eeh: Add EEH notify resume sysfs powerpc/eeh: Add EEH operations to notify resume ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 08:46:11 +0000