summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)Author
2012-09-16Merge 3.6-rc6 into tty-nextGreg Kroah-Hartman
This pulls in the fixes in 3.6-rc6 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-27Merge 3.6-rc3 into tty-nextGreg Kroah-Hartman
This picks up all of the different fixes in Linus's tree that we also need here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25Merge tag 'fixes-3.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc fixes from Arnd Bergmann: "Bug fixes for various ARM platforms. About half of these are for OMAP and submitted before but did not make it into v3.6-rc2." * tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: don't select LEDS_GPIO for snowball ARM: imx: build i.MX6 functions only when needed ARM: imx: select CPU_FREQ_TABLE when needed ARM: imx: fix ksz9021rn_phy_fixup ARM: imx: build pm-imx5 code only when PM is enabled ARM: omap: allow building omap44xx without SMP ARM: dts: imx51-babbage: fix esdhc cd/wp properties ARM: imx6: spin the cpu until hardware takes it down ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500' ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path ARM: Kirkwood: fix Makefile.boot ARM: Kirkwood: Fix iconnect leds ARM: Orion: Set eth packet size csum offload limit ARM: mv78xx0: fix win_cfg_base prototype ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*() ARM: mmp: fix potential NULL dereference ARM: OMAP4: Register the OPP table only for 4430 device cpufreq: OMAP: Handle missing frequency table on SMP systems ARM: OMAP4: sleep: Save the complete used register stack frame ...
2012-08-23ARM: dts: imx51-babbage: fix esdhc cd/wp propertiesShawn Guo
The binding doc and dts use properties "fsl,{cd,wp}-internal" while esdhc driver uses "fsl,{cd,wp}-controller". Fix binding doc and dts to get them match driver code. Reported-by: Chris Ball <cjb@laptop.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: <stable@vger.kernel.org> Acked-by: Chris Ball <cjb@laptop.org>
2012-08-07regulator: tps6586x: correct vin pin for sm0/sm1/sm2Laxman Dewangan
As per datasheet, the vin pin for the regulator is named as vin_sm0, vin_sm1, vin_sm2 for sm0, sm1 and sm2 respectively. Correcting the names in driver and documentation to match with datasheet. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reported-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-06Merge tty-next into 3.6-rc1Greg Kroah-Hartman
This handles the merge issue in: arch/um/drivers/line.c arch/um/drivers/line.h And resolves the duplicate patches that were in both trees do to the tty-next branch not getting merged into 3.6-rc1. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-02Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
2012-07-30Merge tag 'mfd-3.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD bits from Samuel Ortiz: "We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core." Fix up mostly trivial conflicts, with the exception of drivers/usb/host/ehci-omap.c in particular, which had some re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI: centralize controller initialization") that clashed with commit 2761a6394516 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues"). In particular, commit 2761a6394516 moved the usb_add_hcd() to the *middle* of the reset sequence, which clashes fairly badly with the reset sequence re-organization (although it could have been done inside the new omap_ehci_init() function). I left that part of commit 2761a6394516 just undone. * tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits) mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core mfd: Arizone core should select MFD_CORE mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ mfd: Add debug trace on entering and leaving arizone runtime suspend mfd: Correct tps65090 cell names mfd: Remove gpio support from tps6586x core driver ARM: tegra: defconfig: Enable tps6586x gpio gpio: tps6586x: Add gpio support through platform driver mfd: Cache tps6586x register through regmap mfd: Use regmap for tps6586x register access. mfd: Use devm managed resources for tps6586x input: Add onkey support for 88PM80X PMIC mfd: Add support for twl6041 mfd: Fix twl6040 revision information mfd: Matches should be NULL when populate anatop child devices input: ab8500-ponkey: Create AB8500 domain IRQ mapping mfd: Add missing out of memory check for pcf50633 Documentation: Describe the AB8500 Device Tree bindings mfd: Add tps65910 32-kHz-crystal-input init mfd: Drop modifying mc13xxx driver's id_table in probe ...
2012-07-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "More hardware support across the field including a bunch of device drivers. The highlight however really are further steps towards device tree. This has been sitting in -next for ages. All MIPS _defconfigs have been tested to boot or where I don't have hardware available, to at least build fine." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (77 commits) MIPS: Loongson 1B: Add defconfig MIPS: Loongson 1B: Add board support MIPS: Netlogic: early console fix MIPS: Netlogic: Fix indentation of smpboot.S MIPS: Netlogic: remove cpu_has_dc_aliases define for XLP MIPS: Netlogic: Remove unused pcibios_fixups MIPS: Netlogic: Add XLP SoC devices in FDT MIPS: Netlogic: Add IRQ mappings for more devices MIPS: Netlogic: USB support for XLP MIPS: Netlogic: XLP PCIe controller support. MIPS: Netlogic: Platform changes for XLR/XLS I2C MIPS: Netlogic: Platform NAND/NOR flash support MIPS: Netlogic: Platform changes for XLS USB MIPS: Netlogic: Remove NETLOGIC_ prefix MIPS: Netlogic: SMP wakeup code update MIPS: Netlogic: Update comments in smpboot.S MIPS: BCM63XX: Add 96328avng reference board MIPS: Expose PCIe drivers for MIPS MIPS: BCM63XX: Add PCIe Support for BCM6328 MIPS: BCM63XX: Move the PCI initialization into its own function ...
2012-07-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edacLinus Torvalds
Pull EDAC patches from Mauro Carvalho Chehab: - the second part of the EDAC rework: - Add the sysfs nodes that exports the real memory layout, instead of the fake one (needed to properly represent Intel memory controllers since 2002) - convert EDAC MC to use "struct device" instead of creating the sysfs nodes via the kobj API - adds a tracepoint to represent memory errors - some cleanup patches - some fixes at i5000, i5400 and EDAC core - a new EDAC driver for Caldera. * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (33 commits) edac i5000, i5400: fix pointer math in i5000_get_mc_regs() edac: allow specifying the error count with fake_inject edac: add support for Calxeda highbank L2 cache ecc edac: add support for Calxeda highbank memory controller edac: create top-level debugfs directory sb_edac: properly handle error count i7core_edac: properly handle error count edac: edac_mc_handle_error(): add an error_count parameter edac: remove arch-specific parameter for the error handler amd64_edac: Don't pass driver name as an error parameter edac_mc: check for allocation failure in edac_mc_alloc() edac: Increase version to 3.0.0 edac_mc: Cleanup per-dimm_info debug messages edac: Convert debugfX to edac_dbg(X, edac: Use more normal debugging macro style edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs Edac: Add ABI Documentation for the new device nodes edac: move documentation ABI to ABI/testing/sysfs-devices-edac i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy edac: change the mem allocation scheme to make Documentation/kobject.txt happy ...
2012-07-30Merge branch 'for-3.6' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds
Pull PWM subsystem from Thierry Reding: "The new PWM subsystem aims at collecting all implementations of the legacy PWM API and to eventually replace it completely. The subsystem has been in development for over half a year now and many drivers have already been converted. It has been in linux-next for a couple of weeks and there have been no major issues so I think it is ready for inclusion in your tree." Arnd Bergmann <arnd@arndb.de>: "Very much Ack on the new subsystem. It uses the interface declarations as the previously separate pwm drivers, so nothing changes for now in the drivers using it, although it enables us to change those more easily in the future if we want to. This work is also one of the missing pieces that are required to eventually build ARM kernels for multiple platforms, which is currently prohibited (amongs other things) by the fact that you cannot have more than one driver exporting the pwm functions." Tested-and-acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Philip, Avinash <avinashphilip@ti.com> # TI's AM33xx platforms Acked-By: Alexandre Pereira da Silva <aletes.xgr@gmail.com> # LPC32XX Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sachin Kamat <sachin.kamat@linaro.org> Fix up trivial conflicts with other cleanups and DT updates. * 'for-3.6' of git://gitorious.org/linux-pwm/linux-pwm: (36 commits) pwm: pwm-tiehrpwm: PWM driver support for EHRPWM pwm: pwm-tiecap: PWM driver support for ECAP APWM pwm: fix used-uninitialized warning in pwm_get() pwm: add lpc32xx PWM support pwm_backlight: pass correct brightness to callback pwm: Use pr_* functions in pwm-samsung.c file pwm: Convert pwm-samsung to use devm_* APIs pwm: Convert pwm-tegra to use devm_clk_get() pwm: pwm-mxs: Return proper error if pwmchip_remove() fails pwm: pwm-bfin: Return proper error if pwmchip_remove() fails pwm: pxa: Propagate pwmchip_remove() error pwm: Convert pwm-pxa to use devm_* APIs pwm: Convert pwm-vt8500 to use devm_* APIs pwm: Convert pwm-imx to use devm_* APIs pwm: Conflict with legacy PWM API pwm: pwm-mxs: add pinctrl support pwm: pwm-mxs: use devm_* managed functions pwm: pwm-mxs: use global reset function stmp_reset_block pwm: pwm-mxs: encode soc name in compatible string pwm: Take over maintainership of the PWM subsystem ...
2012-07-29Merge branch 'devel'Mauro Carvalho Chehab
* devel: (33 commits) edac i5000, i5400: fix pointer math in i5000_get_mc_regs() edac: allow specifying the error count with fake_inject edac: add support for Calxeda highbank L2 cache ecc edac: add support for Calxeda highbank memory controller edac: create top-level debugfs directory sb_edac: properly handle error count i7core_edac: properly handle error count edac: edac_mc_handle_error(): add an error_count parameter edac: remove arch-specific parameter for the error handler amd64_edac: Don't pass driver name as an error parameter edac_mc: check for allocation failure in edac_mc_alloc() edac: Increase version to 3.0.0 edac_mc: Cleanup per-dimm_info debug messages edac: Convert debugfX to edac_dbg(X, edac: Use more normal debugging macro style edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs Edac: Add ABI Documentation for the new device nodes edac: move documentation ABI to ABI/testing/sysfs-devices-edac i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy edac: change the mem allocation scheme to make Documentation/kobject.txt happy ...
2012-07-29Merge branch 'marvell/dt' into late2/dtOlof Johansson
* marvell/dt: (41 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ...
2012-07-28Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds
Pull embedded i2c changes from Wolfram Sang: "Changes for the "embedded" part of the I2C subsystem: - lots of devicetree conversions of drivers (and preparations for that) - big cleanups for drivers for OMAP, Tegra, Nomadik, Blackfin - Rafael's struct dev_pm_ops conversion patches for I2C - usual driver cleanups and fixes All patches have been in linux-next for an apropriate time and all patches touching files outside of i2c-folders should have proper acks from the maintainers." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (60 commits) Revert "i2c: tegra: convert normal suspend/resume to *_noirq" I2C: MV64XYZ: Add Device Tree support i2c: stu300: use devm managed resources i2c: i2c-ocores: support for 16bit and 32bit IO V4L/DVB: mfd: use reg_shift instead of regstep i2c: i2c-ocores: Use reg-shift property i2c: i2c-ocores: DT bindings and minor fixes. i2c: mv64xxxx: remove EXPERIMENTAL tag i2c-s3c2410: Use plain pm_runtime_put() i2c: s3c2410: Fix pointer type passed to of_match_node() i2c: mxs: Set I2C timing registers for mxs-i2c i2c: i2c-bfin-twi: Move blackfin TWI register access Macro to head file. i2c: i2c-bfin-twi: Move TWI peripheral pin request array to platform data. i2c:i2c-bfin-twi: include twi head file i2c:i2c-bfin-twi: TWI fails to restart next transfer in high system load. i2c: i2c-bfin-twi: Tighten condition when failing I2C transfer if MEN bit is reset unexpectedly. i2c: i2c-bfin-twi: Break dead waiting loop if i2c device misbehaves. i2c: i2c-bfin-twi: Improve the patch for bug "Illegal i2c bus lock upon certain transfer scenarios". i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios. i2c-mv64xxxx: allow more than one driver instance ... Conflicts: drivers/i2c/busses/i2c-nomadik.c
2012-07-27Merge tag 'tty-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY/Serial patches from Greg Kroah-Hartman: "Here's the "tiny" set of patches for 3.6-rc1 for the tty layer and serial drivers. They were cherry-picked from the tty-next branch of the tty git tree, as they are small and "obvious" fixes. The larger changes, as mentioned before, will be saved for the 3.7-rc1 merge window. All of these changes have been in the linux-next releases for quite a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pch_uart: Fix parity setting issue pch_uart: Fix rx error interrupt setting issue pch_uart: Fix missing break for 16 byte fifo tty ldisc: Close/Reopen race prevention should check the proper flag pch_uart: Add eg20t_port lock field, avoid recursive spinlocks vt: fix race in vt_waitactive() serial/of-serial: Add LPC3220 standard UART compatible string serial/8250: Add LPC3220 standard UART type serial_core: Update buffer overrun statistics. serial: samsung: Fixed wrong comparison for baudclk_rate
2012-07-27ATA: sata_mv: Add device tree supportAndrew Lunn
Add support for instantiating this driver from device tree, and add the necassary DT information to the kirkwood.dtsi file. This is based on previous work by Michael Walle and Jason Cooper. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
2012-07-27ARM: Orion: DTify the watchdog timer.Andrew Lunn
Add device tree support to the Orion watchdog timer, and enable its use in the kirkwood devices using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27ARM: Orion: DT support for IRQ and GPIO ControllersAndrew Lunn
Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27Merge branch 'v3.5-rc7-fixes' into v3.5-rc7-dt-v3Andrew Lunn
Merge in branch already pulled. Fulfils dependancies needed by this patchset.
2012-07-27Merge tag 'spi-3.6' into v3.5-rc7-dt-v3Andrew Lunn
spi: Updates for 3.6 Since Grant is even more specacularly busy than usual for the time being I've been collecting SPI patches for him for this release - probably things will revert back to Grant before the next release. There's nothing too exciting here, mostly it's simple driver specific stuff: - Add spi: to the modaliases of SPI devices to provide namespacing. - A driver for AD-FMCOMMS1-EBZ. - DT binding for Orion. - Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers. There may be a few more fixes I've missed, people keep sending me new things.
2012-07-26Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A mixed bag of fixes, some for merge window fallout (tegra, MXS), and a short series of fixes for marvell platforms that didn't make it in before 3.5." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: fix compile error caused by prom_update_property change ARM: dt: tegra trimslice: enable USB2 port ARM: dt: tegra trimslice: add vbus-gpio property ARM: vt8500: Add maintainer for VT8500 architecture ARM: Kirkwood: Replace mrvl with marvell ARM: Orion: fix driver probe error handling with respect to clk ARM: Dove: Fixup ge00 initialisation ARM: Kirkwood: Fix PHY disable clk problems ARM: Kirkwood: Ensure runit clock always ticks. ARM: versatile: Don't use platform clock for Integrator & VE ARM: tegra: harmony: add regulator supply name and its input supply
2012-07-26Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & power management update from Len Brown: "Re-write of the turbostat tool. lower overhead was necessary for measuring very large system when they are very idle. IVB support in intel_idle It's what I run on my IVB, others should be able to also:-) ACPICA core update We have found some bugs due to divergence between Linux and the upstream ACPICA base. Most of these patches are to reduce that divergence to reduce the risk of future bugs. Some cpuidle updates, mostly for non-Intel More will be coming, as they depend on this part. Some thermal management changes needed by non-ACPI systems. Some _OST (OS Status Indication) updates for hot ACPI hot-plug." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (51 commits) Thermal: Documentation update Thermal: Add Hysteresis attributes Thermal: Make Thermal trip points writeable ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check tools/power: turbostat: fix large c1% issue tools/power: turbostat v2 - re-write for efficiency ACPICA: Update to version 20120711 ACPICA: AcpiSrc: Fix some translation issues for Linux conversion ACPICA: Update header files copyrights to 2012 ACPICA: Add new ACPI table load/unload external interfaces ACPICA: Split file: tbxface.c -> tbxfload.c ACPICA: Add PCC address space to space ID decode function ACPICA: Fix some comment fields ACPICA: Table manager: deploy new firmware error/warning interfaces ACPICA: Add new interfaces for BIOS(firmware) errors and warnings ACPICA: Split exception code utilities to a new file, utexcep.c ACPI: acpi_pad: tune round_robin_time ACPICA: Update to version 20120620 ACPICA: Add support for implicit notify on multiple devices ACPICA: Update comments; no functional change ...
2012-07-26Merge tag 'gpio-for-v3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: - New driver for AMD-8111 southbridge GPIOs - New driver for Wolfson Micro Arizona devices - Propagate device tree parse errors - Probe deferral finalizations - all expected calls to GPIO will now hopefully request deferral where apropriate - Misc updates to TCA6424, WM8994, LPC32xx, PCF857x, Samsung MXC, OMAP and PCA953X drivers. Fix up gpio_idx conflicts in drivers/gpio/gpio-mxc.c * tag 'gpio-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available gpiolib: Defer failed gpio requests by default MAINTAINERS: add entry OMAP GPIO driver gpio/pca953x: increase variables size to support 24 bit of data GPIO: PCA953X: Increase size of invert variable to support 24 bit gpio/omap: move bank->dbck initialization to omap_gpio_mod_init() gpio/mxc: use the edge_sel feature if available gpio: propagate of_parse_phandle_with_args errors gpio: samsung: add flags specifier to device-tree binding gpiolib: Add support for Wolfson Microelectronics Arizona class devices gpio: gpio-lpc32xx: Add gpio_to_irq mapping gpio: pcf857x: share 8/16 bit access functions gpio: LPC32xx: Driver cleanup MAINTAINERS: Add Wolfson gpiolib drivers to the Wolfson entry gpiolib: wm8994: Convert to devm_kzalloc() gpiolib: wm8994: Use irq_domain mappings for gpios gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips gpio/tca6424: merge I2C transactions, remove cast gpio/of: fix a typo of comment message
2012-07-26serial/of-serial: Add LPC3220 standard UART compatible stringRoland Stigge
This patch adds a "compatible" string for the new 8250 UART type PORT_LPC3220. This is necessary for initializing LPC32xx UARTs via DT. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer updates from Dmitry Torokhov: "First set of updates for the input subsystem. You will get a new touchscreen driver (Melfas mms114), a new keypad driver for LPC32xx SoC, large update to Atmel mXT touchscreen driver, a lot of drivers acquired device tree support and a slew of other fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: add MELFAS mms114 touchscreen driver Input: add support for key scan interface of the LPC32xx SoC Input: omap4-keypad - add device tree support Input: hanwang - add support for Art Master II tablet Input: spear_keyboard - reconfigure operating frequency on suspend Input: spear_keyboard - fix clock handling during suspend/resume Input: ff-memless - fix a couple min_t() casts Input: synaptics - print firmware ID and board number at init Input: spear_keyboard - generalize keyboard frequency configuration Input: spear_keyboard - rename bit definitions to reflect register Input: spear_keyboard - use correct io accessors Input: spear-keyboard - fix disable device_init_wakeup in remove Input: wacom_i2c - fix compiler warning Input: imx_keypad - check error returned by clk_prepare_enable() Input: imx_keypad - adapt the new kpp clock name Input: imx_keypad - use clk_prepare_enable/clk_disable_unprepare() Input: ad7879 - add option to correct xy axis Input: synaptics_usb - Remove TrackPoint name trailing whitespace Revert "Input: atmel_mxt_ts - warn if sysfs could not be created" Input: MT - Include win8 support ...
2012-07-26Merge tag 'spi-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi updates from Mark Brown: "Since Grant is even more specacularly busy than usual for the time being I've been collecting SPI patches for him for this release - probably things will revert back to Grant before the next release. There's nothing too exciting here, mostly it's simple driver specific stuff: - Add spi: to the modaliases of SPI devices to provide namespacing. - A driver for AD-FMCOMMS1-EBZ. - DT binding for Orion. - Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers. There may be a few more fixes I've missed, people keep sending me new things." * tag 'spi-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/orion: remove uneeded spi_info spi/bcm63xx: fix clock configuration selection spi/orion: add device tree binding spi/omap2: mark omap2_mcspi_master_setup as __devinit spi: omap2-mcspi: Fix the below warning spi: Add AD-FMCOMMS1-EBZ I2C-SPI bridge driver spi/imx: use gpio_is_valid to determine if a gpio is valid spi/imx: remove redundant config.speed_hz setting spi/gpio: start with CS non-active spi: tegra: use dmaengine based dma driver spi/pl022: cleanup pl022 header documentation spi/pl022: enable runtime PM spi/pl022: delete DB5500 support spi/pl022: disable port when unused spi: Add "spi:" prefix to modalias attribute of spi devices
2012-07-26Merge tag 'char-misc-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc patches from Greg Kroah-Hartman: "Here's the "big" pull request for 3.6-rc1 for the char/misc drivers. It's really just a few updates to the mei driver, plus 4 other tiny patches, nothing big at all. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'char-misc-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: use module_pci_driver powerpc/BSR: cleanup the error path of bsr_init mei: mei_irq_thread_write_handler - line break fix mei: streamline the _mei_irq_thread_close/ioctol functions mei: introduce mei_data2slots wrapper mei: mei_wd_host_init: update the comment mei: remove write only wariable wd_due_counter mei: mei_device can be const for mei register access functions mei: revamp host buffer interface function mei: don't query HCSR for host buffer depth mei: group wd_interface_reg with watchdog variables within struct mei_device mei: mei_irq_thread_write_handler check for overflow mei: make mei_write_message more readable mei: check for error codes that mei_flow_ctrl_creds retuns misc: at25: Parse dt settings misc: hpilo: increase number of max supported channels mei: mei.txt: minor grammar fixes
2012-07-26Merge tag 'usb-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB patch set for the 3.6-rc1 merge window. Lots of little changes in here, primarily for gadget controllers and drivers. There's some scsi changes that I think also went in through the scsi tree, but they merge just fine. All of these patches have been in the linux-next tree for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up trivial conflicts in include/scsi/scsi_device.h (same libata conflict that Jeff had already encountered) * tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams usb: Add quirk detection based on interface information usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer USB: add USB_VENDOR_AND_INTERFACE_INFO() macro USB: notify phy when root hub port connect change USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds USB: option: add ZTE MF821D USB: sierra: QMI mode MC7710 moved to qcserial USB: qcserial: adding Sierra Wireless devices USB: qcserial: support generic Qualcomm serial ports USB: qcserial: make probe more flexible USB: qcserial: centralize probe exit path USB: qcserial: consolidate usb_set_interface calls USB: ehci-s5p: Add support for device tree USB: ohci-exynos: Add support for device tree USB: ehci-omap: fix compile failure(v1) usb: host: tegra: pass correct pointer in ehci_setup() USB: ehci-fsl: Update ifdef check to work on 64-bit ppc USB: serial: keyspan: Removed unrequired parentheses. ...
2012-07-26Merge branches 'acpi_pad', 'acpica', 'apei-bugzilla-43282', 'battery', ↵Len Brown
'cpuidle-coupled', 'cpuidle-tweaks', 'intel_idle-ivb', 'ost', 'red-hat-bz-772730', 'thermal', 'thermal-spear' and 'turbostat-v2' into release
2012-07-25Merge branch 'v3.5-rc7-fixes' of git://github.com/lunn/linux into fixesArnd Bergmann
From Andrew Lunn <andrew@lunn.ch>: * 'v3.5-rc7-fixes' of git://github.com/lunn/linux: ARM: Kirkwood: Replace mrvl with marvell ARM: Orion: fix driver probe error handling with respect to clk ARM: Dove: Fixup ge00 initialisation ARM: Kirkwood: Fix PHY disable clk problems ARM: Kirkwood: Ensure runit clock always ticks. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-25ARM: Kirkwood: Replace mrvl with marvellAndrew Lunn
It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-24Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull common clk framework changes from Michael Turquette: "This includes a small number of core framework improvments, platform ports and new DT bindings." Fix up trivial conflicts in drivers/clk/Makefile * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (21 commits) clk: fix compile for OF && !COMMON_CLK clk: fix clk_get on of_clk_get_by_name return check clk: mxs: clk_register_clkdev mx28 usb clocks clk: add highbank clock support dt: add clock binding doc to primecell bindings clk: add DT fixed-clock binding support clk: add DT clock binding support ARM: integrator: convert to common clock clk: add versatile ICST307 driver ARM: integrator: put symbolic bus names on devices ARM: u300: convert to common clock clk: cache parent clocks only for muxes clk: wm831x: Add initial WM831x clock driver clk: Constify struct clk_init_data clk: Add CLK_IS_BASIC flag to identify basic clocks clk: Add support for rate table based dividers clk: Add support for power of two type dividers clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3 clk: mxs: add clkdev lookup for pwm clk: mxs: Fix the GPMI clock name ...
2012-07-24Merge tag 'iommu-updates-v3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "The most important part of these updates is the IOMMU groups code enhancement written by Alex Williamson. It abstracts the problem that a given hardware IOMMU can't isolate any given device from any other device (e.g. 32 bit PCI devices can't usually be isolated). Devices that can't be isolated are grouped together. This code is required for the upcoming VFIO framework. Another IOMMU-API change written by me is the introduction of domain attributes. This makes it easier to handle GART-like IOMMUs with the IOMMU-API because now the start-address and the size of the domain address space can be queried. Besides that there are a few cleanups and fixes for the NVidia Tegra IOMMU drivers and the reworked init-code for the AMD IOMMU. The latter is from my patch-set to support interrupt remapping. The rest of this patch-set requires x86 changes which are not mergabe yet. So full support for interrupt remapping with AMD IOMMUs will come in a future merge window." * tag 'iommu-updates-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (33 commits) iommu/amd: Fix hotplug with iommu=pt iommu/amd: Add missing spin_lock initialization iommu/amd: Convert iommu initialization to state machine iommu/amd: Introduce amd_iommu_init_dma routine iommu/amd: Move unmap_flush message to amd_iommu_init_dma_ops() iommu/amd: Split enable_iommus() routine iommu/amd: Introduce early_amd_iommu_init routine iommu/amd: Move informational prinks out of iommu_enable iommu/amd: Split out PCI related parts of IOMMU initialization iommu/amd: Use acpi_get_table instead of acpi_table_parse iommu/amd: Fix sparse warnings iommu/tegra: Don't call alloc_pdir with as->lock iommu/tegra: smmu: Fix unsleepable memory allocation at alloc_pdir() iommu/tegra: smmu: Remove unnecessary sanity check at alloc_pdir() iommu/exynos: Implement DOMAIN_ATTR_GEOMETRY attribute iommu/tegra: Implement DOMAIN_ATTR_GEOMETRY attribute iommu/msm: Implement DOMAIN_ATTR_GEOMETRY attribute iommu/omap: Implement DOMAIN_ATTR_GEOMETRY attribute iommu/vt-d: Implement DOMAIN_ATTR_GEOMETRY attribute iommu/amd: Implement DOMAIN_ATTR_GEOMETRY attribute ...
2012-07-25mfd: Add support for twl6041Peter Ujfalusi
The delta between twl6040 and twl6041 is small, the main difference is in the number of GPOs (3 on twl6040, 1 on twl6041). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-24Merge tag 'dt-for-3.6' of git://sources.calxeda.com/kernel/linuxLinus Torvalds
Pull devicetree updates from Rob Herring: "A small set of changes for devicetree: - Couple of Documentation fixes - Addition of new helper function of_node_full_name - Improve of_parse_phandle_with_args return values - Some NULL related sparse fixes" Grant's busy packing. * tag 'dt-for-3.6' of git://sources.calxeda.com/kernel/linux: of: mtd: nuke useless const qualifier devicetree: add helper inline for retrieving a node's full name of: return -ENOENT when no property usage-model.txt: fix typo machine_init->init_machine of: Fix null pointer related warnings in base.c file LED: Fix missing semicolon in OF documentation of: fix a few typos in the binding documentation
2012-07-24Merge tag 'pinctrl-for-v3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: "These are the accumulated pin control patches for v3.6: - Various cleanups to the U300 driver - Refactor the pin control core to automatically remove any GPIO ranges when the drivers are removed, instead of having the drivers do this explicitly. - Add a function for registering a batch of GPIO ranges. - Fix a number of incorrect but non-regressive error checks. - Incremental improvements to the COH901, i.MX and Nomadik drivers - Add a one-register-per-pin entirely Device Tree-based pin control driver from Tony Lindgren." * tag 'pinctrl-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: Add one-register-per-pin type device tree based pinctrl driver pinctrl/nomadik: add spi2_oc1_2 pin group pinctrl/nomadik: kerneldoc fix pinctrl/nomadik: use devm_* allocators for gpio probe pinctrl/nomadik: add pin group to mco function pinctrl/nomadik: add hsit_a_2 pin group pinctrl/nomadik: add pin group smcs1 and smps0 pinctrl/nomadik: fix hsir_a_1_pins pin list pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL is set pinctrl/coh901: use clk_prepare_[en|dis]able() pinctrl/pinctrl-tegra: remove IS_ERR checking of pmx->pctl pinctrl/pinctrl-spear: remove IS_ERR checking of pmx->pctl pinctrl/u300: drop unused variable pinctrl: select the proper symbol pinctrl: add pinctrl_add_gpio_ranges function pinctrl: remove pinctrl_remove_gpio_range pinctrl/pinctrl-core: cleanup pinctrl_register pinctrl/u300: delete pointless debug print pinctrl/pinctrl-u300: remove devm_kfree at driver unload
2012-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David S Miller: 1) Remove the ipv4 routing cache. Now lookups go directly into the FIB trie and use prebuilt routes cached there. No more garbage collection, no more rDOS attacks on the routing cache. Instead we now get predictable and consistent performance, no matter what the pattern of traffic we service. This has been almost 2 years in the making. Special thanks to Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who have helped along the way. I'm sure that with a change of this magnitude there will be some kind of fallout, but such things ought the be simple to fix at this point. Luckily I'm not European so I'll be around all of August to fix things :-) The major stages of this work here are each fronted by a forced merge commit whose commit message contains a top-level description of the motivations and implementation issues. 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on input. 3) TCP SYN/ACK performance tweaks from Eric Dumazet. 4) Add namespace support for netfilter L4 conntrack helpers, from Gao Feng. 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from Yuval Mintz. 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet. 7) Support for connection tracker helpers in userspace, from Pablo Neira Ayuso. 8) Allow userspace driven TX load balancing functions in TEAM driver, from Jiri Pirko. 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with embedded gotos. 10) TCP Small Queues, essentially minimize the amount of TCP data queued up in the packet scheduler layer. Whereas the existing BQL (Byte Queue Limits) limits the pkt_sched --> netdevice queuing levels, this controls the TCP --> pkt_sched queueing levels. From Eric Dumazet. 11) Reduce the number of get_page/put_page ops done on SKB fragments, from Alexander Duyck. 12) Implement protection against blind resets in TCP (RFC 5961), from Eric Dumazet. 13) Support the client side of TCP Fast Open, basically the ability to send data in the SYN exchange, from Yuchung Cheng. Basically, the sender queues up data with a sendmsg() call using MSG_FASTOPEN, then they do the connect() which emits the queued up fastopen data. 14) Avoid all the problems we get into in TCP when timers or PMTU events hit a locked socket. The TCP Small Queues changes added a tcp_release_cb() that allows us to queue work up to the release_sock() caller, and that's what we use here too. From Eric Dumazet. 15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits) genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP r8169: revert "add byte queue limit support". ipv4: Change rt->rt_iif encoding. net: Make skb->skb_iif always track skb->dev ipv4: Prepare for change of rt->rt_iif encoding. ipv4: Remove all RTCF_DIRECTSRC handliing. ipv4: Really ignore ICMP address requests/replies. decnet: Don't set RTCF_DIRECTSRC. net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse. ipv4: Remove redundant assignment rds: set correct msg_namelen openvswitch: potential NULL deref in sample() tcp: dont drop MTU reduction indications bnx2x: Add new 57840 device IDs tcp: avoid oops in tcp_metrics and reset tcpm_stamp niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value niu: Fix to check for dma mapping errors. net: Fix references to out-of-scope variables in put_cmsg_compat() net: ethernet: davinci_emac: add pm_runtime support net: ethernet: davinci_emac: Remove unnecessary #include ...
2012-07-23Merge tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull support for three new arm SoC types from Arnd Bergmann: - The mvebu platform includes Marvell's Armada XP and Armada 370 chips, made by the mvebu business unit inside of Marvell. Since the same group also made the older but similar platforms we call "orion5x", "kirkwood", "mv78xx0" and "dove", we plan to move all of them into the mach-mvebu directory in the future. - socfpga is Altera's platform based on Cortex-A9 cores and a lot of FPGA space. This is similar to the Xilinx zynq platform we already support. The code is particularly clean, which is helped by the fact that the hardware doesn't do much besides the parts that are expected to get added in the FPGA. - The OMAP subarchitecture gains support for the latest generation, the OMAP5 based on the new Cortex-A15 core. Support is rather rudimentary for now, but will be extended in the future. * tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) ARM: socfpga: initial support for Altera's SOCFPGA platform arm: mvebu: generate DTBs for supported SoCs ARM: mvebu: MPIC: read number of interrupts from control register arm: mach-mvebu: add entry to MAINTAINERS arm: mach-mvebu: add compilation/configuration change arm: mach-mvebu: add defconfig arm: mach-mvebu: add documentation for new device tree bindings arm: mach-mvebu: add support for Armada 370 and Armada XP with DT arm: mach-mvebu: add source files arm: mach-mvebu: add header clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver ARM: Kconfig update to support additional GPIOs in OMAP5 ARM: OMAP5: Add the build support arm/dts: OMAP5: Add omap5 dts files ARM: OMAP5: board-generic: Add device tree support ARM: omap2+: board-generic: clean up the irq data from board file ARM: OMAP5: Add SMP support ARM: OMAP5: Add the WakeupGen IP updates ARM: OMAP5: l3: Add l3 error handler support for omap5 ARM: OMAP5: gpmc: Update gpmc_init() ... Conflicts: Documentation/devicetree/bindings/arm/omap/omap.txt arch/arm/mach-omap2/Makefile drivers/clocksource/Kconfig drivers/clocksource/Makefile
2012-07-23Merge tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc timer updates from Arnd Bergmann: "This contains two branches dealing with timers, one for the picoxcell platform that is now using DT with the platform-independent dw_apb_timer driver. The other change is for the omap-specific dmtimer driver." * tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: clocksource: dw_apb_timer: Add common DTS glue for dw_apb_timer ARM: OMAP2+: Simplify dmtimer clock aliases ARM: OMAP2+: Move dmtimer clock set function to dmtimer driver ARM: OMAP1: Fix dmtimer support ARM: OMAP: Add flag to indicate if a timer needs a manual reset ARM: OMAP: Remove timer function pointer for context loss counter ARM: OMAP: Remove loses_context variable from timer platform data ARM: OMAP2+: Fix external clock support for dmtimers ARM: OMAP2+: HWMOD: Correct timer device attributes ARM: OMAP: Add DMTIMER capability variable to represent timer features ARM: OMAP2+: Add dmtimer platform function to reserve systimers ARM: OMAP2+: Remove unused max number of timers definition ARM: OMAP: Remove unnecessary clk structure
2012-07-23Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc device tree description updates from Arnd Bergmann: "This branch contains two kinds of updates: Some platforms in the process of getting converted to device tree based booting, and the platform specific patches necessary for that are included here. Other platforms are already converted, so we just need to update the actual device tree source files and the binding documents to add support for new board and new drivers. In the future we will probably separate those into two branches, and in the long run, the plan is to move the device tree source files out of the kernel repository, but that has to wait until we have completed a much larger portion of the binding documents." Fix up trivial conflicts in arch/arm/mach-imx/clk-imx6q.c due to newly added clkdev registers next to a few removed unnecessary ones. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: LPC32xx: Add PWM to base dts file ARM: EXYNOS: mark the DMA channel binding for SPI as preliminary ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5 ARM: EXYNOS: Add spi clock support for EXYNOS5 ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4 ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clock ARM: ux500: Remove PMU platform registration when booting with DT ARM: ux500: Remove temporary snowball_of_platform_devs enablement structure ARM: ux500: Ensure vendor specific properties have the vendor's identifier pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific prefixes ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree ARM: ux500: Apply ab8500-debug node do the db8500 DT structure ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT ...
2012-07-23Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull general arm-soc cleanups from Arnd Bergmann: "These are all boring changes, moving stuff around or renaming things mostly, and also getting rid of stuff that is duplicate or should not be there to start with. Platform-wise this is all over the place, mainly omap, samsung, at91, imx and tegra." Resolve trivial conflict in arch/arm/mach-omap2/clockdomains3xxx_data.c * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) ARM: clps711x: Remove the setting of the time ARM: clps711x: Removed superfluous transform virt_to_bus and related functions ARM: clps711x/p720t: Replace __initcall by .init_early call ARM: S3C24XX: Remove unused GPIO definitions for Openmoko GTA02 board ARM: S3C24XX: Remove unused GPIO definitions for port J ARM: S3C24XX: Remove unused GPA, GPE, GPH bank GPIO aliases ARM: S3C24XX: Convert the touchscreen setup code to common GPIO API ARM: S3C24XX: Convert the PM code to gpiolib API ARM: S3C24XX: Convert QT2410 board file to the gpiolib API ARM: S3C24XX: Convert SMDK board file to the gpiolib API ARM: S3C24XX: Free the backlight gpio requested in Mini2440 board code ARM: imx: remove unused pdata from device macros ARM: imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX_SSI from MACH_MX25_3DS ARM: at91: fix new build errors ARM: at91: add AIC5 support ARM: at91: remove mach/irqs.h ARM: at91: sparse irq support ARM: at91: at91 based machines specify their own irq handler at run time ARM: at91: remove static irq priorities for sam9x5 ARM: at91: add of irq priorities support ...
2012-07-23I2C: MV64XYZ: Add Device Tree supportAndrew Lunn
Extends the driver to get properties from device tree. Rather than pass the N & M factors in DT, use the more standard clock-frequency property. Calculate N & M at run time. In order to do this, we need to know tclk. So the driver uses clk_get() etc in order to get the clock and clk_get_rate() to determine the tclk rate. Not all platforms however have CLK, so some #ifdefery is needed to ensure the driver still compiles when CLK is not available. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [wsa: converted some ints to u32 to match signedness] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-07-23MIPS: Octeon: Add device tree source files.David Daney
The two device tree files octeon_3xxx.dts and octeon_68xx.dts are trimmed by code in a subsequent patch to reflect the hardware actually present on the board. To this end several properties that are not part of the declared bindings are added to aid in trimming off unwanted nodes. Since the device tree and the code that trims it are bound into the kernel binary, these 'marker' properties never escape into the wild, and are purely an implementation detail of the kernel early boot process. This is done for backwards compatibility with existing boards (identified by a board type enumeration value by their bootloaders). New boards will always pass a device tree from the bootloader, the built-in trees are ignored in this case. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/3937/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23pwm: add lpc32xx PWM supportAlexandre Pereira da Silva
Add lpc32xx SOC PWM driver. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-23pwm: pwm-mxs: encode soc name in compatible stringShawn Guo
Encode soc name in the compatible string to know the specific version hardware block. This is the general approach adopted for most bindings. Change mxs-pwm binding to use the approach. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-23pwm-backlight: Add rudimentary device tree supportThierry Reding
This commit adds very basic support for device tree probing. Currently, only a PWM and a list of distinct brightness levels can be specified. Enabling or disabling backlight power via GPIOs is not yet supported. Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-23spi/orion: add device tree bindingAndrew Lunn
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-23Merge branches 'iommu/fixes', 'x86/amd', 'groups', 'arm/tegra' and ↵Joerg Roedel
'api/domain-attr' into next Conflicts: drivers/iommu/iommu.c include/linux/iommu.h
2012-07-22Merge tag 'mmc-merge-for-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.6: Core: - Rename cd-gpio to slot-gpio and extend it to support more slot GPIO functions, such as write-protect. - Add a function to get regulators (Vdd and Vccq) for a host. Drivers: - sdhci-pxav2, sdhci-pxav3: Add device tree support. - sdhi: Add device tree support. - sh_mmcif: Add support for regulators, device tree, slot-gpio. - tmio: Add regulator support, use slot-gpio." * tag 'mmc-merge-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (62 commits) mmc: sdhci-dove: Prepare for common clock framework mmc: sdhci-dove: Add SDHCI_QUIRK_NO_HISPD_BIT mmc: omap_hsmmc: ensure probe returns error upon resource failure mmc: mxs-mmc: Add wp-inverted property mmc: esdhc: Fix DMA_MASK to not break mx25 DMA access mmc: core: reset signal voltage on power up mmc: sd: Fix sd current limit setting mmc: omap_hsmmc: add clk_prepare and clk_unprepare mmc: sdhci: When a UHS switch fails, cycle power if regulator is used mmc: atmel-mci: modify CLKDIV displaying in debugfs mmc: atmel-mci: fix incorrect setting of host->data to NULL mmc: sdhci: poll for card even when card is logically unremovable mmc: sdhci: Introduce new flag SDHCI_USING_RETUNING_TIMER mmc: sdio: Change pr_warning to pr_warn_ratelimited mmc: core: Simplify and fix for SD switch processing mmc: sdhci: restore host settings when card is removed mmc: sdhci: fix incorrect command used in tuning mmc: sdhci-pci: CaFe has broken card detection mmc: sdhci: Report failure reasons for all cases in sdhci_add_host() mmc: s3cmci: Convert s3cmci driver to gpiolib API ...
2012-07-22Merge tag 'regulator-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Lots and lots of fixes from Axel and some others here, plus some framework enhancements which continue the theme of factoring code out of the drivers and into the core. - Initial framework support for GPIO controlled enable signals, saving a bunch of code in drivers. - Move fixed regulator enable time and voltage mapping table specifications to data. - Used some of the recent framework enhancements to make voltage change notifications more useful, passing the voltage in as an argument to the notification. - Fixed the pattern used for finding individual regulators on a device to not rely on the node name, supporting the use of multiple PMICs of the same type in the system. - New drivers for Maxim MAX77686, TI LP872x and LP8788, Samsung S2MPS11, and Wolfson Arizona microphone supplies and LDOs." * tag 'regulator-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (176 commits) regulator: add new lp8788 regulator driver regulator: mc13xxx: Remove extern function declaration for mc13xxx_sw_regulator regulator: tps65910: set input_supply on desc unconditionally regulator: palmas: Fix calcuating selector in palmas_map_voltage_smps regulator: lp872x: Simplify implementation of lp872x_find_regulator_init_data() regulator: twl: Fix list_voltate for twl6030ldo_ops regulator: twl: Convert twl6030ldo_ops to [get|set]_voltage_sel regulator: twl: Fix the formula to calculate vsel and voltage for twl6030ldo regulator: s5m8767: Properly handle gpio_request failure regulator: max8997: Properly handle gpio_request failure regulator: tps62360: use devm_* for gpio request regulator: tps6586x: add support for input supply regulator: tps65217: Add device tree support regulator: aat2870: Remove unused min_uV and max_uV from struct aat2870_regulator regulator: aat2870: Convert to regulator_list_voltage_table regulator: da9052: initialize of_node param for regulator register regulator: Add REGULATOR_STATUS_UNDEFINED. regulator: Fix a typo in regulator_mode_to_status() core function. regulator: s2mps11: Use sec_reg_write rather than sec_reg_update when mask is 0xff regulator: s2mps11: Fix wrong setting for config.dev ...