summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/rtc
AgeCommit message (Collapse)Author
2017-11-22Merge tag 'rtc-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "There is nothing scary this cycle, mostly driver fixes and updates. The core fix has been in for a while and has been tested on multiple kernel revisions by multiple teams. Core: - Fix setting the alarm to the next expiring timer New drivers: - Mediatek MT7622 RTC - NXP PCF85363 - Spreadtrum SC27xx PMIC RTC Drivers updates: - Use generic nvmem to expose the Non volatile ram for ds1305, ds1511, m48t86 and omap - abx80x: solve possible race condition at probe - armada38x: support trimming the RTC oscillator - at91rm9200: fix reading the alarm value at boot - ds1511: allow waking platform - m41t80: rework square wave output - pcf8523: support trimming the RTC oscillator - pcf8563: fix clock output rate - pl031: make interrupt optional - xgene: fix suspend/resume" * tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits) dt-bindings: rtc: imxdi: Improve the bindings text rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation rtc: at91rm9200: fix reading alarm value rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm rtc: sysfs: Use time64_t variables to set time/alarm rtc: xgene: mark PM functions as __maybe_unused rtc: xgene: Fix suspend/resume rtc: pcf8563: don't alway enable the alarm rtc: pcf8563: fix output clock rate rtc: rx8010: Fix for incorrect return value rtc: rx8010: Specify correct address for RX8010_RESV31 rtc: rx8010: Remove duplicate define rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate rtc: m41t80: fix m41t80_sqw_round_rate return value rtc: m41t80: m41t80_sqw_set_rate should return 0 on success rtc: add support for NXP PCF85363 real-time clock rtc: omap: Support scratch registers ...
2017-11-20dt-bindings: rtc: imxdi: Improve the bindings textFabio Estevam
Improve the bindings text by doing the following changes: - Remove the i.MX53 reference, as the RTC on i.MX53 is a different hardware - Add 'clocks' to the list of required properties - Explain that the optional security violation irq is the second entry - Use the real unit address and irq numbers for i.MX25 Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Juergen Borleis <jbe@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-15dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentationBaolin Wang
This patch adds the binding documentation for Spreadtrum SC27xx series RTC device. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-09dt-bindings: Remove leading zeros from bindings notationMarco Franchi
Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"` Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08rtc: add support for NXP PCF85363 real-time clockEric Nelson
Note that alarms are not currently implemented. 64 bytes of nvmem is supported and exposed in sysfs (# is the instance number, starting with 0): /sys/bus/nvmem/devices/pcf85363-#/nvmem Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-25dt-bindings: rtc: mediatek: add bindings for MediaTek SoC based RTCSean Wang
Add device-tree binding for MediaTek SoC based RTC Cc: devicetree@vger.kernel.org Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-05dt-bindings: rtc: merge ds1339 in ds1307 documentationAlexandre Belloni
Now that there is documentation for the ds1307 and compatible RTCs, merge the ds1339 documentation in it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-05dt-bindings: rtc: Add bindings for m41t80 and compatiblesAlexandre Belloni
The ST M41T80 family of RTC are not trivial devices, document them. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-05dt-bindings: rtc: DS1307 and compatibles are not trivialAlexandre Belloni
Document optional properties for ds1307 and compatible RTCs Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-05dt-bindings: rtc: Add sirf,prima2-sysrtc bindingsAlexandre Belloni
Add device tree bindings for the SiRFSoC Real Time Clock. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-05dt-bindings: rtc: add stericsson,coh901331 bindingsAlexandre Belloni
Add device tree bindings for the ST-Ericsson COH 901 331 Real Time Clock Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-13Merge tag 'rtc-4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - remove .open() and .release() RTC ops - constify i2c_device_id New driver: - Realtek RTD1295 - Android emulator (goldfish) RTC Drivers: - ds1307: Beginning of a huge cleanup - s35390a: handle invalid RTC time - sun6i: external oscillator gate support" * tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits) rtc: ds1307: use octal permissions rtc: ds1307: fix braces rtc: ds1307: fix alignments and blank lines rtc: ds1307: use BIT rtc: ds1307: use u32 rtc: ds1307: use sizeof rtc: ds1307: remove regs member rtc: Add Realtek RTD1295 dt-bindings: rtc: Add Realtek RTD1295 rtc: sun6i: Add support for the external oscillator gate rtc: goldfish: Add RTC driver for Android emulator dt-bindings: Add device tree binding for Goldfish RTC driver rtc: ds1307: add basic support for ds1341 chip rtc: ds1307: remove member nvram_offset from struct ds1307 rtc: ds1307: factor out offset to struct chip_desc rtc: ds1307: factor out rtc_ops to struct chip_desc rtc: ds1307: factor out irq_handler to struct chip_desc rtc: ds1307: improve irq setup rtc: ds1307: constify struct chip_desc variables rtc: ds1307: improve trickle charger initialization ...
2017-09-05dt-bindings: Remove "status" from examplesRob Herring
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-05dt-bindings: rtc: Add Realtek RTD1295Andreas Färber
Add a binding for the RTC on the Realtek RTD119x/RTD129x SoC families. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01rtc: sun6i: Add support for the external oscillator gateMaxime Ripard
The RTC can output its 32kHz clock outside of the SoC, for example to clock a WiFi chip. Create a new clock that other devices will be able to retrieve, while maintaining the DT stability by providing a default name for that clock if clock-output-names doesn't list one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01dt-bindings: Add device tree binding for Goldfish RTC driverAleksandar Markovic
Add documentation for DT binding of Goldfish RTC driver. The compatible string used by OS for binding the driver is "google,goldfish-rtc". Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31rtc: ds1307: remove legacy check for "isil, irq2-can-wakeup-machine" propertyHeiner Kallweit
Commit 8b44f5be20fd ("ARM: dts: armada: replace isil,irq2-can-wakeup-machine with wakeup-source property") removed the last usage of "isil,irq2-can-wakeup-machine" almost two years ago. So I think we can get rid of supporting this legacy binding. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06dt-bindings: rtc: stm32: add support for STM32H7Amelie Delaunay
This patch documents support for STM32H7 Real Time Clock. It introduces a new compatible and rework clock definitions. On STM32H7 we have a 'pclk' clock for register access, in addition to the 'rtc_ck' clock. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06rtc: gemini: Augment DT bindings for FaradayLinus Walleij
The Gemini RTC is actually a standard IP block from Faraday Technology called FTRTC010. Rename the bindings, add the generic compatible string and add definitions for the two available clocks. Cc: devicetree@vger.kernel.org Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-26dt-bindings: Document the Broadcom STB wake-up timer nodeFlorian Fainelli
Document the binding for the Broadcom STB SoCs wake-up timer node allowing the system to generate alarms and exit low power states. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-04-03dt-bindings: rtc: document the rtc-sh bindingsChris Brandt
Add the binding documentation for rtc-sh which is an RTC for SuperH and RZ/A SoCs. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09rtc: cpcap: new rtc driverSebastian Reichel
This driver supports the Motorola CPCAP PMIC found on some of Motorola's mobile phones, such as the Droid 4. Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-21rtc: armada38x: Add support for Armada 7K/8KGregory CLEMENT
The Armada 7K/8K use the same RTC IP than the Armada 38x. However the SOC integration differs in 2 points: - MBUS bridge timing initialization - IRQ configuration at SoC level Moreover the Armada 7K/8K have an issue preventing to get the interrupt from alarm 1. This commit allows to use alarm 2 for these A7K/8K but to still use alarm 1 for the Armada 38x. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-12bindings: rtc: correct wrong reference in required propertiesAkinobu Mita
There are currently two broken bindings descriptions for RTC: maxim,ds3231.txt pcf8563.txt They broke because of a improper RST documentation conversion with commit 8c27ceff3604b2 ("docs: fix locations of several documents that got moved") and now reference to a non-existing file: Documentation/devicetree/bindings/i2c/trivial-admin-guide/devices.rst However, the original reference to i2c/trivial-devices should have never been made in the first place. This change fixes this issue by replacing with correct descriptions. Reported-by: Wolfram Sang <wsa@the-dreams.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Heiko Schocher <hs@denx.de> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-01rtc: sun6i: Expose the 32kHz oscillatorMaxime Ripard
The RTC controls the input source of the main 32kHz oscillator in the system, feeding it to the clock unit too. By default, this is using an internal, very inaccurate (+/- 30%) oscillator with a divider to make it roughly around 32kHz. This is however quite impractical for the RTC, since our time will not be tracked properly. Since this oscillator is an input of the main clock unit, and since that clock unit will be probed using CLK_OF_DECLARE, we have to use it as well, leading to a two stage probe: one to enable the clock, the other one to enable the RTC. There is also a slight change in the binding that is required (and should have been from the beginning), since we'll need a phandle to the external oscillator used on that board. We support the old binding by not allowing to switch to the external oscillator and only using the internal one (which was the previous behaviour) in the case where we're missing that phandle. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-24rtc: gemini: Add device tree probingLinus Walleij
This adds bindings and simple probing for the Cortina Systems Gemini SoC RTC. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-13dt-bindings: document the STM32 RTC bindingsAmelie Delaunay
This patch adds documentation of device tree bindings for the STM32 RTC. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-11Documentation: dt: rtc-imxdi: security violation interruptMartin Kaiser
Document the DryIce security violation interrupt. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-18Merge tag 'rtc-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - non-modular drivers are now explicitly non-modular New driver: - Epson Toyocom rtc-7301sf/dg Drivers: - cmos: reject unsupported alarm values wrt the RTC capabilities - ds1307: ACPI support - jz4740: DT support, jz4780 handling, can now be used as a system power controller - mcp795: many fixes, in particular proper month handling - twl: driver is now DT only" * tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits) rtc: mcp795: Fix whitespace and indentation. rtc: mcp795: Prefer using the BIT() macro. rtc: mcp795: fix month write resetting date to 1. rtc: mcp795: fix time range difference between linux and RTC chip. rtc: mcp795: fix bitmask value for leap year (LP). rtc: mcp795: use bcd2bin/bin2bcd. rtc: add support for EPSON TOYOCOM RTC-7301SF/DG rtc: ds1307: Add ACPI support rtc: imxdi: (trivial) fix a typo rtc: ds1374: Merge conditional + WARN_ON() rtc: twl: make driver DT only rtc: twl: kill static variables rtc: fix typos in Kconfig rtc: jz4740: make the driver builtin only rtc: jz4740: remove unused EXPORT_SYMBOL Documentation: bindings: fix twl-rtc documentation rtc: Enable compile testing for Maxim and Samsung drivers MIPS: jz4740: Remove obsolete code MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree ...
2016-12-19rtc: add support for EPSON TOYOCOM RTC-7301SF/DGAkinobu Mita
This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel interface compatible with SRAM. This driver supports basic clock, calendar and alarm functionality. Tested with Microblaze linux running on Artix7 FPGA board with my own custom IP for RTC-7301. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-05Documentation: bindings: fix twl-rtc documentationNicolae Rosia
Add interrupts documentation Fix example and formatting Signed-off-by: Nicolae Rosia <Nicolae_Rosia@mentor.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-04Documentation: dt: Add binding info for jz4740-rtc driverPaul Cercueil
This commit adds documentation for the device-tree bindings of the jz4740-rtc driver, which supports the RTC unit present in the JZ4740 and JZ4780 SoCs from Ingenic. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Maarten ter Huurne <maarten@treewalker.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-24docs: fix locations of several documents that got movedMauro Carvalho Chehab
The previous patch renamed several files that are cross-referenced along the Kernel documentation. Adjust the links to point to the right places. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-12dt/bindings: Add bindings for Micro Crystal rv8803Oleksij Rempel
... and Epson RX8900 real time clock Signed-off-by: Oleksij Rempel <fixed-term.Oleksij.Rempel@de.bosch.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21rtc: omap: Support ext_wakeup configurationMarcin Niestroj
Support configuration of ext_wakeup sources. This patch makes it possible to enable ext_wakeup and set it's polarity, depending on board configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to notify about power-button presses. Handling power-button presses enables to recover from RTC-only power states correctly. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: ds1390: Fix the SPI chip select numberFabio Estevam
The number after the '@' symbol should be the SPI chip select number associated with the ds1390 and it should match the 'reg' field. So change it the address to zero, to make it consistent. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-14powerpc: Various typo fixesMichael Ellerman
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-21Merge tag 'rtc-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem wide cleanups: - Use IS_ENABLED() instead of checking for built-in or module - remove useless DRV_VERSION - remove CLK_IS_ROOT - remove UIE signaling Drivers: - ds1302: rewritten to be a proper SPI device driver - m41t80: huge cleanup, alarm, wakelarm ans oscialltor failure detection support - rv3029: switch to regmap to handle rv3049, alarm support, fixes - zynqmp: enable switching to battery power, fixes - small fixes for at91sam9, da9053, ds1307, ds1685, ds3232, r2025, sa1100, snvs, stmp3xxx, tps6586x" * tag 'rtc-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits) rtc: tps6586x: rename so module can be autoloaded rtc: rv3029: hide unused i2c device table rtc: rs5c372: r2025: fix check for 'oscillator halted' condition rtc: rv3029: add alarm IRQ rtc: rv3029: fix set_time function rtc: rv3029: fix alarm support rtc: rv3029: Remove some checks and warnings rtc: rv3029: Add support of RV3049 rtc: rv3029: convert to use regmap rtc: rv3029: remove 'i2c' in functions names rtc: stmp3xxx: print message on error rtc: Use IS_ENABLED() instead of checking for built-in or module rtc: ds3232: fix call trace when rtc->ops_lock is used as NULL rtc: snvs: return error in case enable_irq_wake fails rtc: zynqmp: Update seconds time programming logic rtc: sa1100: DT spelling s/interrupt-name/interrupt-names/ rtc: mc13xxx: remove UIE signaling rtc: mxc: remove UIE signaling rtc: ds1307: Remove CLK_IS_ROOT rtc: hym8563: Remove CLK_IS_ROOT ...
2016-05-20Merge tag 'devicetree-for-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Rewrite of the unflattening code to avoid recursion and lessen the stack usage. - Rewrite of the phandle args parsing code to get rid of the fixed args size. This is needed for IOMMU code. - Sync to latest dtc which adds more dts style checking. These warnings are enabled with "W=1" compiles. - Tegra documentation updates related to the above warnings. - A bunch of spelling and other doc fixes. - Various vendor prefix additions. * tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (52 commits) devicetree: Add Creative Technology vendor id gpio: dt-bindings: add ibm,ppc4xx-gpio binding of/unittest: Remove unnecessary module.h header inclusion drivers/of: Fix build warning in populate_node() drivers/of: Fix depth when unflattening devicetree of: dynamic: changeset prop-update revert fix drivers/of: Export of_detach_node() drivers/of: Return allocated memory from of_fdt_unflatten_tree() drivers/of: Specify parent node in of_fdt_unflatten_tree() drivers/of: Rename unflatten_dt_node() drivers/of: Avoid recursively calling unflatten_dt_node() drivers/of: Split unflatten_dt_node() of: include errno.h in of_graph.h of: document refcount incrementation of of_get_cpu_node() Documentation: dt: soc: fix spelling mistakes Documentation: dt: power: fix spelling mistake Documentation: dt: pinctrl: fix spelling mistake Documentation: dt: opp: fix spelling mistake Documentation: dt: net: fix spelling mistakes Documentation: dt: mtd: fix spelling mistake ...
2016-05-20rtc: sa1100: DT spelling s/interrupt-name/interrupt-names/Geert Uytterhoeven
Fix typo in interrupt-names Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-05-20rtc: ds1302: rewrite using SPISergey Yanovich
DS1302 is an half-duplex SPI device. The driver respects this fact now. Pin configurations should be implemented using SPI subsystem. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-25Documentation: bindings: fix palmas-rtc documentationDr. H. Nikolaus Schaller
change 100mA -> 100uA Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-03-29rtc: s3c: Document in binding that only s3c6410 needs a src clkJavier Martinez Canillas
The S3C binding doc says that the RTC and RTC source clocks are required but the S3C driver supports different HW IP and only the s3c6410 needs a source clock. Fix the binding explaining that the source clock is only needed for the s3c6410-rtc compatible controller. Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-24Merge tag 'rtc-4.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull more RTC updates from Alexandre Belloni: "A second pull request for v4.6 with a few fixesi before -rc1. The new features for abx80x actually make the RTC behave correctly. Drivers: - abx80x: handle both XT and RC oscillators, XT failure bit and autocalibration - m41t80: avoid out of range year values - rv8803: workaround an i2c HW issue" * tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: abx80x: handle the oscillator failure bit rtc: abx80x: handle autocalibration rtc: rv8803: workaround i2c HW issue rtc: mcp795: add devicetree support rtc: asm9260: remove incorrect __init/__exit annotations rtc: m41t80: avoid out of range year values rtc: s3c: Don't print an error on probe deferral rtc: rv3029: stop mentioning rv3029c2
2016-03-21rtc: mcp795: add devicetree supportEmil Bartczak
Add device tree support to the rtc-mcp795 driver. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-15Merge tag 'rtc-4.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Core: - New sysfs interface to set and read clock offset - Drivers can now be both I2C and SPI (see pcf2127 and ds3232) New drivers: - Alphascale ASM9260 - Epson RX6110SA - Maxim max20024 and max77620 (in max77686) - Microchip PIC32 - NXP pcf2129 (in pcf2127) Subsystem wide cleanups: - remove IRQF_EARLY_RESUME when unecessary Drivers: - ds1307: clock output, temperature sensor and wakeup-source support - ds1685: actually spin forever in poweroff error path - ds3232: many cleanups - ds3234: merged in ds3232 - hym8563: fix invalid year calculation - max77686: many cleanups - max77802 merged in max77686 - pcf2123: cleanups and offset support - pcf85063: cleanups - pcf8523: propely handle oscillator stop bit - rv3029: many cleanups, trickle charger and temperature sensor support - rv8803: convert spin_lock to mutex_lock - rx8025: many fixes - vr41xx: restore alarm_irq_enable" * tag 'rtc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (86 commits) rtc: pcf2127: add pcf2129 device id rtc: pcf2127: add support for spi interface rtc: pcf2127: convert to use regmap rtc: rv3029: Add thermometer hwmon support rtc: rv3029: Add update_bits helper for eeprom access rtc: ds1685: actually spin forever in poweroff error path rtc: hym8563: fix invalid year calculation rtc: ds3232: use rtc->ops_lock to protect alarm operations rtc: ds3232: fix issue when irq is shared several devices rtc: ds3232: remove unused UIE code rtc: ds3232: add register access error checks rtc: ds3232: fix read on /dev/rtc after RTC_AIE_ON rtc: merge ds3232 and ds3234 rtc: ds3232: convert to use regmap rtc: pxa: fix Kconfig indentation rtc: rv3029: Add device tree property for trickle charger rtc: rv3029: Add functions for EEPROM access rtc: rv3029: Add i2c register update-bits helper rtc: rv3029: Add missing register definitions rtc: rv3029: Add "rv3029" I2C device id ...
2016-03-14dt/bindings: Add bindings for the PIC32 real time clockJoshua Henderson
Document the devicetree bindings for the real time clock found on Microchip PIC32 class devices. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14doc: dt: add documentation for alphascale,asm9260-rtcOleksij Rempel
Document Alphascale asm9260 RTC bindings Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: ds1307: add clock provider support for DS3231Akinobu Mita
DS3231 has programmable square-wave output signal. This enables to use this feature as a clock provider of common clock framework. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14Documentation: devicetree: add epson rx6110 bindingSteffen Trumtrar
Add the binding documentation for the Epson RX6110 RTC. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>