summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/rtc
AgeCommit message (Collapse)Author
2019-12-12dt-bindings: Change maintainer addressMaxime Ripard
While my email address has changed for a while, all the schemas I contributed still have the old one unfortunately. Update it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org>
2019-12-02Merge tag 'devicetree-for-5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot, syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar, Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue, Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404 interconnect, Unisoc/Spreadtrum SoCs and UART - Convert a bunch of Samsung bindings to DT schema - Convert a bunch of ST stm32 bindings to DT schema - Realtek and Exynos additions to Arm Mali bindings - Fix schema errors in RiscV CPU schema - Various schema fixes from improved meta-schema checks - Improve the handling of 'dma-ranges' and in particular fix DMA mask setup on PCI bridges - Fix a memory leak in add_changeset_property() and DT unit tests. - Several documentation improvements for schema validation - Rework build rules to improve schema validation errors - Color output for dtx_diff * tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits) libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h dt-bindings: arm: Remove leftover axentia.txt of: unittest: fix memory leak in attach_node_and_children of: overlay: add_changeset_property() memory leak dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems dt-bindings: power: Rename back power_domain.txt bindings to fix references dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema dt-bindings: remoteproc: convert stm32-rproc to json-schema dt-bindings: mailbox: convert stm32-ipcc to json-schema dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema dt-bindings: interrupt-controller: Convert stm32-exti to json-schema dt-bindings: crypto: Convert stm32 HASH bindings to json-schema dt-bindings: rng: Convert stm32 RNG bindings to json-schema dt-bindings: pwm: Convert Samsung PWM bindings to json-schema dt-bindings: pwm: Convert PWM bindings to json-schema dt-bindings: serial: Add a new compatible string for SC9863A dt-bindings: serial: Convert sprd-uart to json-schema dt-bindings: arm: Add bindings for Unisoc SC9863A ...
2019-10-24dt-bindings: rtc: mediatek: add missing mt6397 rtcJosef Friedl
add missing devicetree-binding document for mt6397 rtc in later patch driver is extended with mt6323 chip Suggested-By: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Josef Friedl <josef.friedl@speed.at> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-15dt-bindings: rtc: s3c: Include generic dt-schema bindingsKrzysztof Kozlowski
Include the generic rtc.yaml bindings in Samsung S3C RTC bindings. This brings the requirement of proper node names and adds parsing of additional properties. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-10-15dt-bindings: rtc: s3c: Use defines instead of clock numbersKrzysztof Kozlowski
Make the examples in S3C RTC bindings more readable and bring them closer to real DTS by using defines for clocks. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-10-15dt-bindings: samsung: Indent examples with four spacesKrzysztof Kozlowski
Change the indentation of examples used in json-schema bindings from two to four spaces as this makes the code easier to read and seems to be preferred in other files. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Sebastian Reichel <sre@kernel.org> # for power/reset Signed-off-by: Rob Herring <robh@kernel.org>
2019-10-10dt-bindings: rtc: rtc-sh: convert bindings to json-schemaSimon Horman
Convert Real Time Clock for Renesas SH and ARM SoCs bindings documentation to json-schema. Also name bindings documentation file according to the compat string being documented. Also correct syntax error in interrupts field in example. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-10-01dt-bindings: rtc: s3c: Convert S3C/Exynos RTC bindings to json-schemaKrzysztof Kozlowski
Convert Samsung S3C/Exynos Real Time Clock bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2019-09-01dt-bindings: rtc: ds1307: add rx8130 compatibleBastian Krause
The required OF entries were added with commit 47dd47292828 ("rtc: ds1307: add OF and ACPI entries for Epson RX8130"). Cc: devicetree@vger.kernel.org Signed-off-by: Bastian Krause <bst@pengutronix.de> Link: https://lore.kernel.org/r/20190830134755.1121-1-bst@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf8563: add Microcrystal RV8564 compatibleAlexandre Belloni
Add a compatible string for the Microcrystal RV8564. Link: https://lore.kernel.org/r/20190829212547.19185-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf8563: add Epson RTC8564 compatibleAlexandre Belloni
Add a compatible string for the Epson RTC8564. Link: https://lore.kernel.org/r/20190829212547.19185-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-23dt-bindings: rtc: sun6i: Add compatible for H6 RTCOndrej Jirman
RTC on H6 is similar to the one on H5 SoC, but incompatible in small details. See the driver for description of differences. For example H6 RTC needs to enable the external low speed oscillator. Add new compatible for this RTC. Signed-off-by: Ondrej Jirman <megous@megous.com> Link: https://lore.kernel.org/r/20190820151934.3860-2-megous@megous.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-23dt-bindings: rtc: add bindings for FlexTimer ModuleBiwen Li
The patch adds bindings for FlexTimer Module Signed-off-by: Biwen Li <biwen.li@nxp.com> Link: https://lore.kernel.org/r/20190813030157.48590-2-biwen.li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22dt-bindings: rtc: new binding for Amlogic VRTCKevin Hilman
Add binding fo the new VRTC driver for Amlogic SoCs. The 64-bit family of SoCs only has an RTC managed by firmware, and this VRTC driver provides the simple, one-register firmware interface. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20190812232850.8016-2-khilman@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20rtc: pcf2123: add proper compatible stringAlexandre Belloni
nxp,rtc-pcf2123 is not a proper compatible strong for this RTC. The part name is only pcf2123 and is less confusing. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190819182656.29744-9-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-07-22dt-bindings: rtc: Remove the PCF8563 from the trivial RTCsMaxime Ripard
The PCF8563 has a binding of its own, with some, clocks related, additional properties. Remove it from the trivial RTC bindings. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://lore.kernel.org/r/20190722140921.22681-1-maxime.ripard@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-06dt-bindings: rtc: sun6i: Add the R40 RTC compatibleMaxime Ripard
The R40 has a pretty different RTC compared to the other SoCs we've encountered so far, the most important difference being that it now has only a single interrupt, compared to the previous SoCs having two. Let's add a compatible for that. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-06dt-bindings: rtc: Convert Allwinner A31 RTC to a schemaMaxime Ripard
The newer Allwinner SoCs have an embedded RTC supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-06dt-bindings: rtc: Convert Allwinner A10 RTC to a schemaMaxime Ripard
The older Allwinner SoCs have an embedded RTC supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-06dt-bindings: rtc: Move trivial RTC over to a schemas of their ownMaxime Ripard
The RTC generic bindings has a bunch of devices that have a pretty simple binding, with just compatible, reg and optional interrupts properties. This is exactly what the trivial devices YAML schema has been created for, except that they can also have the start-year property, but not any other generic RTC property. Let's create a schema with those constraints. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-06dt-bindings: rtc: Add YAML schemas for the generic RTC bindingsMaxime Ripard
The real time clocks have a bunch of generic properties that are needed in a device tree. Add a YAML schemas for those. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-04rtc: pcf85063: add Micro Crystal RV8263 supportAlexandre Belloni
The Micro Crystal RV8263 has the same IC as the pcf85063 but has an on board crystal. This means that the CAP_SEL bit has to be cleared so the correct capacitance is selected for the crystal. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-04rtc: pcf85063: differentiate pcf85063a and pcf85063tpAlexandre Belloni
As stated in a comment pcf85063a and pcf85063tp don't have the same number of registers. Especially, pcf85063tp doesn't have alarm support. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-04dt-bindings: rtc: Add on-chip ASPEED RTC documentationJoel Stanley
Describe the RTC as used in the ASPEED BMC SoCs. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-04rtc: x1205: Add DT bindingsLinus Walleij
This adds device tree bindings for the Xircom X1205 RTC found in the Linksys NSLU2. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [alexandre.belloni@bootlin.com: move doc to rtc.txt] Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-02dt-bindings: rtc: add rx8571 compatibleBiju Das
The Epson rx8571 is compatible with the Epson rx8581 RTC. The difference between the rx8571 and rx8581 RTC is that the former has 16 bytes more RAM. This renders them incompatible from a DT point of view. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17dt-bindings: rtc: add ABEOZ9Artem Panfilov
Add ABEOZ9 to the list of trivial RTCs Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17rtc: rv3028: add new driverAlexandre Belloni
Add a driver for the MicroCrystal RV-3028. It is a SMT Real-Time Clock Module that incorporates an integrated CMOS circuit together with an XTAL. It has an i2c interface. The driver handles date/time, alarms, trickle charging, timestamping, frequency offset correction, EEPROM and NVRAM. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17dt-bindings: rtc: Update for new chip in isl1208 seriesTrent Piepho
Since this documents multiple chips controlled by the isl1208 driver, name it isil,isl1208.txt, as the convention is to use the base driver name in the bindings document for drivers with multiple devices. Include all chips supported by this driver in the docs. Make it clear which properties apply to which chips. Expand documentation for existing isil,evienb property to explain operation in more detail. Existing docs just describe it in terms of setting a bit in a register. CC: Alessandro Zummo <a.zummo@towertech.it> CC: Alexandre Belloni <alexandre.belloni@bootlin.com> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-11dt-bindings: rtc: add device-tree bindings for the Amlogic Meson RTCMartin Blumenstingl
The 32-bit Amlogic Meson SoCs (Meson6, Meson8, Meson8b and Meson8m2) have a built-in RTC block. It has the following inputs: - an 32.768kHz crystal oscillator - an interrupt line - a reset line - 0.9V voltage input Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> [resurrected patches from Ben after 2 years] Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-30dt-bindings: rtc: Add RV1805 to abracon,abx80x bindingsMarek Vasut
Add compatible string for Microcrystal RV1805 RTC, which is compatible with AB1805. The RV1805 uses smaller 10 pin package, while the AB1805 uses larger 16pin package, however the die inside the chip is the same. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Rob Herring <robh+dt@kernel.org> To: devicetree@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22dt-bindings: rtc: Add bindings for Cadence RTCJan Kotas
This patch adds a DT binding documentation for Cadence RTC controller. Signed-off-by: Jan Kotas <jank@cadence.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22dt-binding: pcf85063: add xtal load capacitanceSam Ravnborg
The NXP pcf85063 supports two different xtal load capacitance - 7000fF (7pF) HW default, Linux driver default - 12500fF (12.5pF) Minimum power consumption To obtain a precise RTC the pcf85063 must be configured with the correct capacitance load of the xtal. Add a property to specify the xtal capacitance load. The default value matches that of the current Linux driver. With a dedicated binding remove the entry in rtc.txt Signed-off-by: Søren Andersen <san@skov.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Urs Fässler <urs.fassler@bbv.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22dt-binding: pcf8523: add xtal load capacitanceSam Ravnborg
The NXP pcf8523 supports two different xtal load capacitance - 7000fF (7pF) HW default - 12500fF (12.5pF) Minimum power consumption, driver default To obtain a precise RTC the pcf8523 must be configured with the correct capacitance load of the xtal. Add a property to specify the xtal capacitance load. The default value matches that of the current Linux driver. With a dedicated binding remove the entry in rtc.txt Signed-off-by: Søren Andersen <san@skov.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22dt-bindings: rtc: Add quartz-load-femtofarads propertySam Ravnborg
The quartz-load-femtofarads are relevant for several users. Add it as a common property in rtc. Note that valid values and default values must be documented. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Suggested-by: Rob Herring <robh+dt@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-10rtc: pcf8523: Add rv8523 compatibleAlexandre Belloni
The Microcrystal RV-8523 is compatible with the PCF8523. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-10dt-bindings: rtc: sd3078: add device tree documentationDianlong Li
The devicetree documentation for the SD3078 device tree. Signed-off-by: Dianlong Li <long17.cool@163.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-01Merge tag 'rtc-4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - new %ptR printk format - rename core files - allow registration of multiple nvmem devices New driver: - i.MX system controller RTC Driver updates: - abx80x: handle voltage ioctls, correct binding doc - m41t80: correct month in alarm reads - pcf85363: add pcf85263 support - pcf8523: properly handle battery low flag - s3c: limit alarm to one year in the future as ALMYEAR is broken - sun6i: rework clock output binding" * tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits) rtc: rename core files rtc: nvmem: fix possible use after free rtc: add i.MX system controller RTC support dt-bindings: fsl: scu: add rtc binding rtc: pcf2123: Add Microcrystal rv2123 rtc: class: reimplement devm_rtc_device_register rtc: enforce rtc_timer_init private_data type rtc: abx80x: Implement RTC_VL_READ,CLR ioctls rtc: pcf85363: Add support for NXP pcf85263 rtc dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock rtc: pcf8523: don't return invalid date when battery is low dt-bindings: rtc: use a generic node name for ds1307 PM: Switch to use %ptR m68k/mac: Switch to use %ptR Input: hp_sdc_rtc - Switch to use %ptR rtc: tegra: Switch to use %ptR rtc: s5m: Switch to use %ptR rtc: s3c: Switch to use %ptR rtc: rx8025: Switch to use %ptR rtc: rx6110: Switch to use %ptR ...
2018-12-18rtc: pcf2123: Add Microcrystal rv2123Alexandre Belloni
Add a compatible string for Microcrystal rv2123 as the reset procedure seem to be differing. However, the current driver works just fine. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-11dt-bindings: rtc: pcf85363: Document pcf85263 real-time clockBiju Das
The pcf85263 RTC is compatible with the pcf85363 RTC. The difference between the pcf85263 and pcf85363 RTC is that the latter has 64 bytes more RAM. This renders them incompatible from a DT point of view. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-11dt-bindings: rtc: use a generic node name for ds1307Lubomir Rintel
The example should follow the practice or using a generic node name instead of the precise programming model, as recommended by the DTSpec. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-07dt-bindings: rtc: sun6i-rtc: Fix register range in exampleChen-Yu Tsai
The register range for the RTC extends beyond 0x54. Use the size from the user manual's memory map instead. Fixes: 9765d2d94309 ("rtc: sun6i: Add sun6i RTC driver") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-06dt-bindings: rtc: sun6i-rtc: Export internal RC oscillatorChen-Yu Tsai
Experiments showed that on at least the H3/H5/A64 the RTC's internal oscillator also feeds the CPUS mux in the PRCM. Export this clock through the device tree, instead of having to use a dummy fixed-clock device node, for the PRCM to consume. This will properly describe the relationship between the clocks. Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-06dt-bindings: rtc: sun6i-rtc: Deprecate external clock output for A31Chen-Yu Tsai
The A31 does not have an external clock output directly from the RTC. Instead, it has four muxable clock outputs: three (A, B, C) are controlled from the CCU, and the last (D) is controlled from the PRCM. Deprecate the usage of the external clock output for the A31 compatible. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-06dt-bindings: rtc: sun6i-rtc: Add compatible strings for pre-H6 variantsChen-Yu Tsai
While doing Bluetooth enablement for various boards based on various Allwinner SoCs, minor differences in the RTC modules were found. These include a lack of an external clock output (A31), different internal oscillator frequencies (H3/H5/A64/V3/V3s), different regulator voltage settings (H5/H6), and the presence of miscellaneous registers unrelated to the RTC (A64/R40/H5/H6). The datasheet also describes different number of registers for non-volatile storage, though based on actual experiments the actual number is the same across the board. This patch adds a list of all pre-H6 variants, grouped by the internal oscillator's clock rate, regulator settings, and the presence of the external clock output. Combinations are introduced for the variants that have miscellaneous registers. The RTC block in the H6 also handles the 24 MHz DCXO. This will require more device tree binding changes and will be done later. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-06dt-bindings: rtc: sun6i-rtc: Rewrite clock outputs as a listChen-Yu Tsai
The clock output section for this binding describes the two outputs in the descriptions for both the #clock-cells and clock-output-names properties. Instead of overlapping information that is hard to read, rewrite the clock outputs as a list of indices and descriptions. The properies can reference this list instead. This will also make it easier to add notes or conditions to the clocks, and also for adding new outputs. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-04dt-bindings: rtc: Move trivial RTCs to rtc.txtAlexandre Belloni
Move trivial RTCs to the rtc generic binding documentation as they all also support at least 'start-year'. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-04dt-bindings: rtc: add generic bindingsAlexandre Belloni
Add generic binding documentation for the RTC subsystem. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-22rtc: dt-binding: abx80x: fix resistance scaleBaruch Siach
The abracon,tc-resistor property value is in kOhm. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-20Merge tag 'rtc-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "It is now possible to add custom sysfs attributes while avoiding a possible race condition. Unused code has been removed resulting in a nice reduction of the code base. And more drivers have been switched to SPDX by their maintainers. Summary: Subsystem: - new helpers to add custom sysfs attributes - struct rtc_task removal along with rtc_irq_[un]register() - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore Drivers: - armada38x: reset after rtc power loss - ds1307: now supports m41t11 - isl1208: now supports isl1219 and tamper detection - pcf2127: internal SRAM support" * tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits) rtc: ds1307: simplify hwmon config rtc: s5m: Add SPDX license identifier rtc: maxim: Add SPDX license identifiers rtc: isl1219: add device tree documentation rtc: isl1208: set ev-evienb bit from device tree rtc: isl1208: Add "evdet" interrupt source for isl1219 rtc: isl1208: add support for isl1219 with tamper detection rtc: sysfs: facilitate attribute add to rtc device rtc: remove struct rtc_task char: rtc: remove task handling rtc: pcf85063: preserve control register value between stop and start rtc: sh: remove unused variable rtc_dev rtc: unexport rtc_irq_set_* rtc: simplify rtc_irq_set_state/rtc_irq_set_freq rtc: remove irq_task and irq_task_lock rtc: remove rtc_irq_register/rtc_irq_unregister rtc: sh: remove dead code rtc: sa1100: don't set PIE frequency rtc: ds1307: support m41t11 variant rtc: ds1307: fix data pointer to m41t0 ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 11:09:47 +0000