Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Update dtc to upstream version v1.6.0-31-gcbca977ea121
- dtx_diff help text reformatting
- Speed-up validation time for binding and dtb checks using json for
intermediate files
- Add support for running yamllint on DT schema files
- Remove old booting-without-of.rst
- Extend the example schema to address common issues
- Cleanup handling of additionalProperties/unevaluatedProperties
- Ensure all DSI controller schemas reference dsi-controller.yaml
- Vendor prefixes for Zealz, Wandbord/Technexion, Embest RIoT, Rex,
DFI, and Cisco Meraki
- Convert at25, SPMI bus, TI hwlock, HiSilicon Hi3660 USB3 PHY, Arm
SP805 watchdog, Arm SP804, and Samsung 11-pin USB connector to DT
schema
- Convert HiSilicon SoC and syscon bindings to DT schema
- Convert SiFive Risc-V L2 cache, PLIC, PRCI, and PWM to DT schema
- Convert i.MX bindings for w1, crypto, rng, SIM, PM, DDR, SATA, vf610
GPIO, and UART to DT schema
- Add i.MX 8M compatible strings
- Add LM81 and DS1780 as trivial devices
- Various missing properties added to fix dtb validation warnings
* tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (111 commits)
dt-bindings: misc: explicitly add #address-cells for slave mode
spi: dt-bindings: spi-controller: explicitly require #address-cells=<0> for slave mode
dt: Remove booting-without-of.rst
dt-bindings: update usb-c-connector example
dt-bindings: arm: hisilicon: add missing properties into cpuctrl.yaml
dt-bindings: arm: hisilicon: add missing properties into sysctrl.yaml
dt-bindings: pwm: imx: document i.MX compatibles
scripts/dtc: Update to upstream version v1.6.0-31-gcbca977ea121
dt-bindings: Add running yamllint to dt_binding_check
dt-bindings: powerpc: Add a schema for the 'sleep' property
dt-bindings: pinctrl: sirf: Fix typo abitrary
dt-bindings: pinctrl: qcom: Fix typo abitrary
dt-bindings: Explicitly allow additional properties in common schemas
dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
dt-bindings: Add missing 'unevaluatedProperties'
Docs: Fixing spelling errors in Documentation/devicetree/bindings/
dt-bindings: arm: hisilicon: convert Hi6220 domain controller bindings to json-schema
dt-bindings: riscv: convert pwm bindings to json-schema
dt-bindings: riscv: convert plic bindings to json-schema
dt-bindings: fu540: prci: convert PRCI bindings to json-schema
...
|
|
In order to add meta-schema checks for additional/unevaluatedProperties
being present, all schema need to make this explicit. As common/shared
schema are included by other schemas, they should always allow for
additionalProperties.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201005183830.486085-5-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This doesn't yet do anything in the tools, but make it explicit so we can
check either 'unevaluatedProperties' or 'additionalProperties' is present
in schemas.
'unevaluatedProperties' is appropriate when including another schema (via
'$ref') and all possible properties and/or child nodes are not
explicitly listed in the schema with the '$ref'.
This is in preparation to add a meta-schema to check for missing
'unevaluatedProperties' or 'additionalProperties'. This has been a
constant source of review issues.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20201005183830.486085-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Another round of wack-a-mole. The json-schema default is additional
unknown properties are allowed, but for DT all properties should be
defined.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewd-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20201002234143.3570746-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Document RZ/G2H (R8A774E1) SoC bindings.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix spelling mistake documenation -> documentation.
Fixes: 5a18bb14c0f7 ("dt-bindings: net: dsa: Let dsa.txt refer to dsa.yaml")
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
"Nothing earth shattering here, lots of small fixes (f.e. missing RCU
protection, bad ref counting, missing memset(), etc.) all over the
place:
1) Use get_file_rcu() in task_file iterator, from Yonghong Song.
2) There are two ways to set remote source MAC addresses in macvlan
driver, but only one of which validates things properly. Fix this.
From Alvin Šipraga.
3) Missing of_node_put() in gianfar probing, from Sumera
Priyadarsini.
4) Preserve device wanted feature bits across multiple netlink
ethtool requests, from Maxim Mikityanskiy.
5) Fix rcu_sched stall in task and task_file bpf iterators, from
Yonghong Song.
6) Avoid reset after device destroy in ena driver, from Shay
Agroskin.
7) Missing memset() in netlink policy export reallocation path, from
Johannes Berg.
8) Fix info leak in __smc_diag_dump(), from Peilin Ye.
9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
Tomlinson.
10) Fix number of data stream negotiation in SCTP, from David Laight.
11) Fix double free in connection tracker action module, from Alaa
Hleihel.
12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: nexthop: don't allow empty NHA_GROUP
bpf: Fix two typos in uapi/linux/bpf.h
net: dsa: b53: check for timeout
tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
net: sctp: Fix negotiation of the number of data streams.
dt-bindings: net: renesas, ether: Improve schema validation
gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
hv_netvsc: Remove "unlikely" from netvsc_select_queue
bpf: selftests: global_funcs: Check err_str before strstr
bpf: xdp: Fix XDP mode when no mode flags specified
selftests/bpf: Remove test_align leftovers
tools/resolve_btfids: Fix sections with wrong alignment
net/smc: Prevent kernel-infoleak in __smc_diag_dump()
sfc: fix build warnings on 32-bit
net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
libbpf: Fix map index used in error message
net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
net: atlantic: Use readx_poll_timeout() for large timeout
...
|
|
The phy-connection-type parameter is described in ePAPR 1.1:
Specifies interface type between the Ethernet device and a physical
layer (PHY) device. The value of this property is specific to the
implementation.
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://lore.kernel.org/r/1597917724-11127-1-git-send-email-madalin.bucur@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
- Remove pinctrl consumer properties, as they are handled by core
dt-schema,
- Document missing properties,
- Document missing PHY child node,
- Add "additionalProperties: false".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clean-up incorrect indentation, extra spaces, long lines, and missing
EOF newline in schema files. Most of the clean-ups are for list
indentation which should always be 2 spaces more than the preceding
keyword.
Found with yamllint (which I plan to integrate into the checks).
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add "reset-post-delay-us" parameter to MDIO bus properties,
so it's possible to add a delay after reset deassert.
This is optional in case external hardware slows down
release of the reset signal.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2020-07-31
Here's the main bluetooth-next pull request for 5.9:
- Fix firmware filenames for Marvell chipsets
- Several suspend-related fixes
- Addedd mgmt commands for runtime configuration
- Multiple fixes for Qualcomm-based controllers
- Add new monitoring feature for mgmt
- Fix handling of legacy cipher (E4) together with security level 4
- Add support for Realtek 8822CE controller
- Fix issues with Chinese controllers using fake VID/PID values
- Multiple other smaller fixes & improvements
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The DSA bindings have been converted to YAML. Therefore, the old text style
documentation should refer to that one.
The text file can be removed completely once all the existing DSA switch
bindings have been converted as well.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For future DSA drivers it makes sense to add a generic DSA yaml binding which
can be used then. This was created using the properties from dsa.txt. It
includes the ports and the dsa,member property.
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.9
First set of patches for v5.9. This comes later than usual as I was
offline for two weeks. The biggest change here is moving Microchip
wilc1000 driver from staging. There was an immutable topic branch with
one commit moving the whole driver and the topic branch was pulled
both to staging-next and wireless-drivers-next. At the moment the only
reported conflict is in MAINTAINERS file, so I'm hoping the move
should go smoothly.
Other notable changes are ath11k getting 6 GHz band support and rtw88
supporting RTL8821CE. And there's also the usual fixes, API changes
and cleanups all over.
Major changes:
wilc1000
* move from drivers/staging to drivers/net/wireless/microchip
ath11k
* add 6G band support
* add spectral scan support
iwlwifi
* make FW reconfiguration quieter by not using warn level
rtw88
* add support for RTL8821CE
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are no non-standard bindings being used. However Felix is a PCI
device and Seville is a platform device. So give an example of device
tree for this switch and document its compatible string.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All conflicts seemed rather trivial, with some guidance from
Saeed Mameed on the tc_ct.c one.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DP83869 is an Ethernet PHY, not a charger, so fix the documentation
accordingly.
Fixes: 4d66c56f7efe ("dt-bindings: net: dp83869: Add TI dp83869 phy")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DP83867 is an Ethernet PHY, not a charger, so fix the documentation
accordingly.
Fixes: 74ac28f16486 ("dt-bindings: dp83867: Convert DP83867 to yaml")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
uart-has-rtscts is a boolean property. These are defined as present
(which means that this property evaluates to "true") or absent (which
means that this property evaluates to "false"). Remove the numeric value
from the example to make it comply with the boolean property bindings.
Fixes: 1cc2d0e021f867 ("dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The
WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other
processors with minimal resource requirements with a simple
SPI/SDIO-to-Wi-Fi interface.
WILC1000 driver has been part of staging for few years. With
contributions from the community, it has improved significantly. Full
driver review has helped in achieving the current state.
The details for those reviews are captured in 1 & 2.
[1]. https://lore.kernel.org/linux-wireless/1537957525-11467-1-git-send-email-ajay.kathat@microchip.com/
[2]. https://lore.kernel.org/linux-wireless/1562896697-8002-1-git-send-email-ajay.kathat@microchip.com/
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Add the internal delay values into the header and update the binding
with the internal delay properties.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tx-internal-delays and rx-internal-delays are a common setting for RGMII
capable devices.
These properties are used when the phy-mode or phy-controller is set to
rgmii-id, rgmii-rxid or rgmii-txid. These modes indicate to the
controller that the PHY will add the internal delay for the connection.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A new optional property can be used to reference the load/save GPIO,
used for PTP hardware clock (PHC) operations. This patch documents it in
the binding documentation.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Amlogic Meson G12A, G12B and SM1 have the same (at least as far as we
know at the time of writing) PRG_ETHERNET glue register implementation.
This implementation however is slightly different from AXG as it now has
an undocument "auto cali idx val" register in PRG_ETH1[17:16] which
seems to be related to RGMII Ethernet.
Add a compatible string for G12A and newer so the new registers can be
used.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are some new broken doc links due to yaml renames
at DT. Developers should really run:
./scripts/documentation-file-ref-check
in order to solve those issues while submitting patches.
This tool can even fix most of the issues with:
./scripts/documentation-file-ref-check --fix
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/0e4a7f0b7efcc8109c8a41a2e13c8adde4d9c6b9.1592203542.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The examples template is a 'simple-bus' with a size of 1 cell for
had between 2 and 4 cells which really only errors on I2C or SPI type
devices with a single cell.
The easiest fix in most cases is to change the 'reg' property to 1 cell
for address and size.
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: linux-rockchip@lists.infradead.org
Cc: linux-media@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Another round of 'allOf' removals that came in this cycle.
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert various DT (non-binding) doc files to ReST
- Various improvements to device link code
- Fix __of_attach_node_sysfs refcounting bug
- Add support for 'memory-region-names' with reserved-memory binding
- Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics,
Shanghai Awinic Technology Co., MikroTik, Silex Insight
- A bunch more binding conversions to DT schema. Only 3K to go.
- Add a minimum version check for schema tools
- Treewide dropping of 'allOf' usage with schema references. Not needed
in new json-schema spec.
- Some formatting clean-ups of schemas
* tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits)
dt-bindings: clock: Add documentation for X1830 bindings.
dt-bindings: mailbox: Convert imx mu to json-schema
dt-bindings: power: Convert imx gpcv2 to json-schema
dt-bindings: power: Convert imx gpc to json-schema
dt-bindings: Merge gpio-usb-b-connector with usb-connector
dt-bindings: timer: renesas: cmt: Convert to json-schema
dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
dt-bindings: timer: Convert i.MX GPT to json-schema
dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
dt-bindings: serial: Add binding for UART pin swap
dt-bindings: geni-se: Add interconnect binding for GENI QUP
dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix
dt-bindings: input: touchscreen: edt-ft5x06: change reg property
dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
dt-bindings: timer: renesas: mtu2: Convert to json-schema
of/fdt: Remove redundant kbasename function call
dt-bindings: clock: Convert i.MX1 clock to json-schema
dt-bindings: clock: Convert i.MX21 clock to json-schema
dt-bindings: clock: Convert i.MX25 clock to json-schema
...
|
|
The driver itself was renamed before getting merged into mainline, but
the binding document kept the old name. This makes both names consistent.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add description for NXP imx8 families like imx8mp/imx8dxl
that integrate the Synopsys gmac IP version 5.10a.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document RZ/G1H (R8A7742) SoC bindings.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Document RZ/G1H (R8A7742) SoC bindings.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
- rename the 'gpr' property string to 'fsl,stop-mode'.
- Update the property to define gpr register offset and
bit in DT, since different instance have different gpr bit.
v2:
* rename 'gpr' property string to 'fsl,stop-mode'.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.8
Second set of patches for v5.8. Lots of new features and new supported
hardware for mt76. Also rtw88 got new hardware support.
Major changes:
rtw88
* add support for Realtek 8723DE PCI adapter
* rename rtw88.ko/rtwpci.ko to rtw88_core.ko/rtw88_pci.ko
iwlwifi
* stop supporting swcrypto and bt_coex_active module parameters on
mvm devices
* enable A-AMSDU in low latency
mt76
* new devices for mt76x0/mt76x2
* support for non-offload firmware on mt7663
* hw/sched scan support for mt7663
* mt7615/mt7663 MSI support
* TDLS support
* mt7603/mt7615 rate control fixes
* new driver for mt7915
* wowlan support for mt7663
* suspend/resume support for mt7663
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds yaml DT bindings for the MediaTek STAR Ethernet MAC present
on the mt8* family of SoCs.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the missing size and address cells to the b53 example. Otherwise, it may not
compile or issue warnings if directly copied into a device tree.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the dp83867 binding to yaml.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add BSD 2 Clause to the licensing.
CC: Rob Herring <robh@kernel.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The examples template is a 'simple-bus' with a size of 1 cell for
had between 2 and 4 cells which really only errors on I2C or SPI type
devices with a single cell.
The easiest fix in most cases is to change the 'reg' property to for 1 cell
address and size. In some cases with child devices having 2 cells, that
doesn't make sense so a bus node is needed.
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The PRG_ETHERNET registers can add an RX delay in RGMII mode. This
requires an internal re-timing circuit whose input clock is called
"timing adjustment clock". Document this clock input so the clock can be
enabled as needed.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The PRG_ETHERNET registers on Meson8b and newer SoCs can add an RX
delay. Add a property with the known supported values so it can be
configured according to the board layout.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2020-05-13
Here's a second attempt at a bluetooth-next pull request which
supercedes the one dated 2020-05-09. This should have the issues
discovered by Jakub fixed.
- Add support for Intel Typhoon Peak device (8087:0032)
- Add device tree bindings for Realtek RTL8723BS device
- Add device tree bindings for Qualcomm QCA9377 device
- Add support for experimental features configuration through mgmt
- Add driver hook to prevent wake from suspend
- Add support for waiting for L2CAP disconnection response
- Multiple fixes & cleanups to the btbcm driver
- Add support for LE scatternet topology for selected devices
- A few other smaller fixes & cleanups
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the UniPhier AVE4 controller binding to DT schema format.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is used to enable merging of Flash EEPROM data with OTP ROM calibration.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Sort the items in the compatible string list in increasing number of SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add binding document for bluetooth part of RTL8723BS/RTL8723CS
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch follows K3 CPTS review comments from Rob Herring
<robh@kernel.org>.
- "reg" and "compatible" properties are required now
- minor format changes
- K3 CPTS example added to K3 MCU CPSW bindings
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.8
First set of patches for v5.8. Changes all over, ath10k apparently
seeing most new features this time. rtw88 also had lots of changes due
to preparation for new hardware support.
In this pull request there's also a new macro to include/linux/iopoll:
read_poll_timeout_atomic(). This is needed by rtw88 for atomic
polling.
Major changes:
ath11k
* add debugfs file for testing ADDBA and DELBA
* add 802.11 encapsulation offload on hardware support
* add htt_peer_stats_reset debugfs file
ath10k
* enable VHT160 and VHT80+80 modes
* enable radar detection in secondary segment
* sdio: disable TX complete indication to improve throughput
* sdio: decrease power consumption
* sdio: add HTT TX bundle support to increase throughput
* sdio: add rx bitrate reporting
ath9k
* improvements to AR9002 calibration logic
carl9170
* remove buggy P2P_GO support
p54usb
* add support for AirVasT USB stick
rtw88
* add support for antenna configuration
ti wlcore
* add support for AES_CMAC cipher
iwlwifi
* support for a few new FW API versions
* new hw configs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|