summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net
AgeCommit message (Collapse)Author
2016-08-01Merge tag 'armsoc-dt64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull 64-bit ARM DT updates from Olof Johansson: "Just as the 32-bit contents, the 64-bit device tree branch also contains a number of additions this release cycle. New platforms: - LG LG1313 - Mediatek MT6755 - Renesas r8a7796 - Broadcom 2837 Other platforms with larger updates are: - Nvidia X1 platforms (USB 3.0, regulators, display subsystem) - Mediatek MT8173 (display subsystem added) - Rockchip RK3399 (a lot of new peripherals) - ARM Juno reference implementation (SCPI power domains, coresight, thermal)" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) arm64: tegra: Enable HDMI on Jetson TX1 arm64: tegra: Add sor1_src clock arm64: tegra: Add XUSB powergates on Tegra210 arm64: tegra: Add DPAUX pinctrl bindings arm64: tegra: Add ACONNECT bus node for Tegra210 arm64: tegra: Add audio powergate node for Tegra210 arm64: tegra: Add regulators for Tegra210 Smaug arm64: tegra: Correct Tegra210 XUSB mailbox interrupt arm64: tegra: Enable XUSB controller on Jetson TX1 arm64: tegra: Enable debug serial on Jetson TX1 arm64: tegra: Add Tegra210 XUSB controller arm64: tegra: Add Tegra210 XUSB pad controller arm64: tegra: Add DSI panel on Jetson TX1 arm64: tegra: p2597: Add SDMMC power supplies arm64: tegra: Add PMIC support on Jetson TX1 Revert "ARM64: DTS: meson-gxbb: switch ethernet to real clock" arm64: dts: hi6220: Add pl031 RTC support arm64: dts: r8a7796/salvator-x: Enable watchdog timer arm64: dts: r8a7796: Add RWDT node arm64: dts: r8a7796: Use SYSC "always-on" PM Domain ...
2016-08-01Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Improved and new platform support for various SoCs: New SoC support: - Broadcom BCM23550 - Freescale i.MX7Solo - Qualcomm MDM9615 - Renesas r8a7792 Improvements: - convert clps711x to multiplatform - debug uart improvements for Atmel platforms - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram - OMAP tweaks and improvements to hwmod - OMAP support for kexec on SMP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: davinci: fix build break because of undeclared dm365_evm_snd_data ARM: s3c64xx: smartq: Avoid sparse warnings ARM: sti: Implement dummy L2 cache's write_sec ARM: STi: Update machine _namestr to be more generic. arm: meson: explicitly select clk drivers ARM: tango: add Suspend-to-RAM support ARM: hisi: consolidate the hisilicon machine entries ARM: tango: fix CONFIG_HOTPLUG_CPU=n build MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry MAINTAINERS: Update BCM63XX entry MAINTAINERS: Add NS2 entry MAINTAINERS: Fix nsp false-positives MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs ARM: clps711x: Switch to MULTIPLATFORM ARM: clps711x: Remove boards support ARM: clps711x: Add basic DT support ARM: clps711x: Reduce static map size ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu ARM: oxnas: Change OX810SE default driver config ...
2016-07-30Merge tag 'devicetree-for-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - remove most of_platform_populate() calls in arch code. Now the DT core code calls it in the default case and platforms only need to call it if they have special needs - use pr_fmt on all the DT core print statements - CoreSight binding doc improvements to block name descriptions - add dt_to_config script which can parse dts files and list corresponding kernel config options - fix memory leak hit with a PowerMac DT - correct a bunch of STMicro compatible strings to use the correct vendor prefix - fix DA9052 PMIC binding doc to match what is actually used in dts files * tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table" xtensa: Fix build error due to missing include file MIPS: ath79: Add missing include file Fix spelling errors in Documentation/devicetree ARM: dts: fix STMicroelectronics compatible strings powerpc/dts: fix STMicroelectronics compatible strings Documentation: dt: i2c: use correct STMicroelectronics vendor prefix scripts/dtc: dt_to_config - kernel config options for a devicetree of: fdt: mark unflattened tree as detached of: overlay: add resolver error prints coresight: document binding acronyms Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties of: use pr_fmt prefix for all console printing of/irq: Mark initialised interrupt controllers as populated of: fix memory leak related to safe_name() Revert "of/platform: export of_default_bus_match_table" of: unittest: use of_platform_default_populate() to populate default bus memory: omap-gpmc: use of_platform_default_populate() to populate default bus bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus ...
2016-07-25Documentation: dtb: xgene: Add MDIO nodeIyappan Subramanian
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Tested-by: Toan Le <toanle@apm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22Fix spelling errors in Documentation/devicetreeOtto Kekäläinen
Signed-off-by: Otto Kekäläinen <otto@seravo.fi> Signed-off-by: Rob Herring <robh@kernel.org>
2016-07-19wlcore: spi: add wl18xx supportEyal Reizer
Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the init stage. Signed-off-by: Eyal Reizer <eyalr@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18Documentation/devicetree: document cavium-pip rx-delay/tx-delay propertiesAaro Koskinen
Document cavium-pip rx-delay/tx-delay properties. Currently the board specific values need to be hardcoded in the platform code, which we want to avoid when moving to DT-only booting. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2016-07-16net: hisilicon: Add Fast Ethernet MAC driverDongpo Li
This patch adds the Hisilicon Fast Ethernet MAC(FEMAC) driver. The FEMAC supports max speed 100Mbps and has been used in many Hisilicon SoC. Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16net: Add MDIO bus driver for the Hisilicon FEMACDongpo Li
This patch adds a separate driver for the MDIO interface of the Hisilicon Fast Ethernet MAC. Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: phy: micrel: Add KSZ8041FTL fiber mode supportPhilipp Zabel
We can't detect the FXEN (fiber mode) bootstrap pin, so configure it via a boolean device tree property "micrel,fiber-mode". If it is enabled, auto-negotiation is not supported. The only available modes are 100base-fx (full duplex and half duplex). Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11net: dsa: b53: Add support for BCM585xx/586xx/88312 integrated switchFlorian Fainelli
Update the SRAB, core driver and binding document to support the BCM585xx/586xx/88312 integrated switch (Northstar Plus SoCs family). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-10net: ethernet: Add TSE PCS support to dwmac-socfpgaTien Hock Loh
This adds support for TSE PCS that uses SGMII adapter when the phy-mode of the dwmac is set to sgmii. Signed-off-by: Tien Hock Loh <thloh@altera.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05Merge tag 'imx-soc-4.8' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc The i.MX SoC changes for 4.8: - A patch series including both cpuidle and FEC driver changes to disable deeper idle states when FEC is active while board level workaround for ERR006687 is not available - A number patches to fix sparse warnings and spell errors - A fix for TZIC FIQ translation from VIRQ to HWIRQ - Support compatible of i.MX7 Solo SoC which has a subset of i.MX7 Dual * tag 'imx-soc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: add support for i.MX 7Solo ARM: i.MX: Disable supervisor protect for i.MX51 ARM: imx6: fix missing <soc/imx/cpuidle.h> in cpuidle-imx6q.c ARM: i.MX: Fix FIQ interrupt handling for TZIC ARM: imx6: fix static declaration in include/soc/imx/cpuidle.h ARM: imx6q: export cpuidle functions needed by fec driver ARM: imx: fix missing include of common.h ARM: imx: fix missing includes ARM: imx6: disable deeper idle states when FEC is active w/o HW workaround ARM: mach-imx6q: fix spelling mistake in error message Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-30net: netcp: Fix a typo in keystone-netcp.txtMasanari Iida
This patch fix a spelling typo in keystone-netcp.txt Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: davinci_mdio: introduce "ti,cpsw-mdio" compat stringGrygorii Strashko
Introduce "ti,cpsw-mdio" compatible string for Davinci MDIO, because it's required to distinguish the case when MDIO is part of TI CPSW to enable features supported by TI CPSW (for example, enable PM management). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: davinci_mdio: document missed "ti, am4372-mdio" compat stringGrygorii Strashko
Document missed "ti,am4372-mdio" compat string used for TI am437x SoC (am4372.dtsi). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28drivers: net: stmmac: add port selection programmingGiuseppe CAVALLARO
In case of SGMII more, for example when a MAC2MAC connection is needed, the port selection bits (inside the MAC configuration registers) have to be programmed according to the link selected. So the patch adds a new DT parameter to pass the port selection and to programmed related PCS and CORE to use it. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27Merge tag 'linux-can-next-for-4.8-20160623' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2016-06-17 this is a pull request of 4 patches for net-next/master. Arnd Bergmann's patch fixes a regresseion in af_can introduced in linux-can-next-for-4.8-20160617. There are two patches by Ramesh Shanmugasundaram, which add CAN-2.0 support to the rcar_canfd driver. And a patch by Ed Spiridonov that adds better error diagnoses messages to the Ed Spiridonov driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-26net: stmmac: dwmac-rk: add rk3228-specific dataXing Zheng
Add constants and callback functions for the dwmac on rk3228/rk3229 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23can: rcar_canfd: Add Classical CAN only mode supportRamesh Shanmugasundaram
The controller can operate in one of the two global modes - CAN FD only mode (default) - Classical CAN (CAN2.0) only mode This patch adds support for Classical CAN only mode. It can be enabled by defining the optional device tree property "renesas,no-can-fd" of this node. Note: R-Car Gen3 h/w manual v0.51E shows bit6 of RSCFDnCFDGCFG as reserved, which is incorrect. This bit is same as RSCFDnGCFG. Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-20arm64: dts: apm: Use lowercase consistently for hex constantsBjorn Helgaas
The convention in these files is to use lowercase for "0x" prefixes and for the hex constants themselves, but a few changes didn't follow that convention, which makes the file annoying to read. Use lowercase consistently for the hex constants. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Duc Dang <dhdang@apm.com>
2016-06-17Merge tag 'linux-can-next-for-4.8-20160617' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2016-06-17 this is a pull request of 14 patches for net-next/master. Geert Uytterhoeven contributes a patch that adds a file patterns for CAN device tree bindings to MAINTAINERS. A patch by Alexander Aring fixes warnings when building without proc support. A patch by me improves the sample point calculation. Marek Vasut's patch converts the slcan driver to use CAN_MTU. A patch by William Breathitt Gray converts the tscan1 driver to use module_isa_driver. Two patches by Maximilian Schneider for the gs_usb driver fix coding style and add support for set_phys_id callback. 5 patches by Oliver Hartkopp add support for CANFD to the bcm. And finally two patches by Ramesh Shanmugasundaram, which add support for the rcar_canfd driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17Documentation: DT: cpsw: remove rx_descs propertyIvan Khoronzhuk
There is no reason to hold s/w dependent parameter in device tree. Even more, there is no reason in this parameter because davinici_cpdma driver splits pool of descriptors equally between tx and rx channels anyway. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17can: rcar_canfd: Add Renesas R-Car CAN FD driverRamesh Shanmugasundaram
This patch adds support for the CAN FD controller found in Renesas R-Car SoCs. The controller operates in CAN FD only mode by default. CAN FD mode supports both Classical CAN & CAN FD frame formats. The controller supports ISO 11898-1:2015 CAN FD format only. This controller supports two channels and the driver can enable either or both of the channels. Driver uses Rx FIFOs (one per channel) for reception & Common FIFOs (one per channel) for transmission. Rx filter rules are configured to the minimum (one per channel) and it accepts Standard, Extended, Data & Remote Frame combinations. Note: There are few documentation errors in R-Car Gen3 Hardware User Manual v0.5E with respect to CAN FD controller. They are listed below: 1. CAN FD interrupt numbers 29 & 30 are listed as per channel interrupts. However, they are common to both channels (i.e.) they are global and channel interrupts respectively. 2. CANFD clock is derived from PLL1. This is not documented. 3. CANFD clock is further divided by (1/2) within the CAN FD controller. This is not documented. 4. The minimum value of NTSEG1 in RSCFDnCFDCmNCFG register is 2 Tq. It is specified 4 Tq in the manual. 5. The maximum number of message RAM area the controller can use is 3584 bytes. It is specified 10752 bytes in the manual. Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-15dt: bindings: Add bindings for Cirrus Logic CS89x0 ethernet chipAlexander Shiyan
Add device tree binding documentation details for Cirrus Logic CS8900/CS8920 ethernet chip. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-12ARM: imx6: disable deeper idle states when FEC is active w/o HW workaroundLucas Stach
The i.MX6 Q/DL has an erratum (ERR006687) that prevents the FEC from waking the CPUs when they are in wait(unclocked) state. As the hardware workaround isn't applicable to all boards, disable the deeper idle state when the workaround isn't present and the FEC is in use. This allows to safely run a kernel with CPUidle enabled on all i.MX6 boards. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: David S. Miller <davem@davemloft.net> (for network changes) Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-10binding: mdio-mux: Add DT binding doc for Broadcom MDIO bus multiplexerPramod Kumar
Add DT binding doc for Broadcom MDIO bus multiplexer driver. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10binding: Make "mdio-parent-bus" property from mandatory to optionalPramod Kumar
Change "mdio-parent-bus" from mandatory section to optional as it won't be required by integrated MDIO multiplexer which has bus selection and mdio transaction generation logic, integrated inside. Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net: dsa: b53: Add support for Broadcom RoboSwitchFlorian Fainelli
This patch adds support for Broadcom's BCM53xx switch family, also known as RoboSwitch. Some of these switches are ubiquituous, found in home routers, Wi-Fi routers, DSL and cable modem gateways and other networking related products. This drivers adds the library driver (b53_common.c) as well as a few bus glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx). Basic operations are supported to bring the Layer 1/2 up and running, but not much more at this point, subsequent patches add the remaining features. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: Document new bindingAndrew Lunn
Add the new binding to the documentation of the existing binding. Mark the old binding as deprecated. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-03dt: bindings: fix documentation for MARVELL's bt-sd8xxx wireless deviceWei-Ning Huang
The property marvell,wakeup-pin and marvell,wakeup-gap-ms are read as u16 in the driver. Fix documentation and example accordingly. Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes and more updates from David Miller: 1) Tunneling fixes from Tom Herbert and Alexander Duyck. 2) AF_UNIX updates some struct sock bit fields with the socket lock, whereas setsockopt() sets overlapping ones with locking. Seperate out the synchronized vs. the AF_UNIX unsynchronized ones to avoid corruption. From Andrey Ryabinin. 3) Mount BPF filesystem with mount_nodev rather than mount_ns, from Eric Biederman. 4) A couple kmemdup conversions, from Muhammad Falak R Wani. 5) BPF verifier fixes from Alexei Starovoitov. 6) Don't let tunneled UDP packets get stuck in socket queues, if something goes wrong during the encapsulation just drop the packet rather than signalling an error up the call stack. From Hannes Frederic Sowa. 7) SKB ref after free in batman-adv, from Florian Westphal. 8) TCP iSCSI, ocfs2, rds, and tipc have to disable BH in it's TCP callbacks since the TCP stack runs pre-emptibly now. From Eric Dumazet. 9) Fix crash in fixed_phy_add, from Rabin Vincent. 10) Fix length checks in xen-netback, from Paul Durrant. 11) Fix mixup in KEY vs KEYID macsec attributes, from Sabrina Dubroca. 12) RDS connection spamming bug fixes from Sowmini Varadhan * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits) net: suppress warnings on dev_alloc_skb uapi glibc compat: fix compilation when !__USE_MISC in glibc udp: prevent skbs lingering in tunnel socket queues bpf: teach verifier to recognize imm += ptr pattern bpf: support decreasing order in direct packet access net: usb: ch9200: use kmemdup ps3_gelic: use kmemdup net:liquidio: use kmemdup bpf: Use mount_nodev not mount_ns to mount the bpf filesystem net: cdc_ncm: update datagram size after changing mtu tuntap: correctly wake up process during uninit intel: Add support for IPv6 IP-in-IP offload ip6_gre: Do not allow segmentation offloads GRE_CSUM is enabled with FOU/GUE RDS: TCP: Avoid rds connection churn from rogue SYNs RDS: TCP: rds_tcp_accept_worker() must exit gracefully when terminating rds-tcp net: sock: move ->sk_shutdown out of bitfields. ipv6: Don't reset inner headers in ip6_tnl_xmit ip4ip6: Support for GSO/GRO ip6ip6: Support for GSO/GRO ipv6: Set features for IPv6 tunnels ...
2016-05-20Revert "phy: add support for a reset-gpio specification"Fabio Estevam
Commit da47b4572056 ("phy: add support for a reset-gpio specification") causes the following xtensa qemu crash according to Guenter Roeck: [ 9.366256] libphy: ethoc-mdio: probed [ 9.367389] (null): could not attach to PHY [ 9.368555] (null): failed to probe MDIO bus [ 9.371540] Unable to handle kernel paging request at virtual address 0000001c [ 9.371540] pc = d0320926, ra = 903209d1 [ 9.375358] Oops: sig: 11 [#1] This reverts commit da47b4572056487fd7941c26f73b3e8815ff712a. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20Merge tag 'devicetree-for-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Rewrite of the unflattening code to avoid recursion and lessen the stack usage. - Rewrite of the phandle args parsing code to get rid of the fixed args size. This is needed for IOMMU code. - Sync to latest dtc which adds more dts style checking. These warnings are enabled with "W=1" compiles. - Tegra documentation updates related to the above warnings. - A bunch of spelling and other doc fixes. - Various vendor prefix additions. * tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (52 commits) devicetree: Add Creative Technology vendor id gpio: dt-bindings: add ibm,ppc4xx-gpio binding of/unittest: Remove unnecessary module.h header inclusion drivers/of: Fix build warning in populate_node() drivers/of: Fix depth when unflattening devicetree of: dynamic: changeset prop-update revert fix drivers/of: Export of_detach_node() drivers/of: Return allocated memory from of_fdt_unflatten_tree() drivers/of: Specify parent node in of_fdt_unflatten_tree() drivers/of: Rename unflatten_dt_node() drivers/of: Avoid recursively calling unflatten_dt_node() drivers/of: Split unflatten_dt_node() of: include errno.h in of_graph.h of: document refcount incrementation of of_get_cpu_node() Documentation: dt: soc: fix spelling mistakes Documentation: dt: power: fix spelling mistake Documentation: dt: pinctrl: fix spelling mistake Documentation: dt: opp: fix spelling mistake Documentation: dt: net: fix spelling mistakes Documentation: dt: mtd: fix spelling mistake ...
2016-05-16phy: add support for a reset-gpio specificationUwe Kleine-König
The framework only asserts (for now) that the reset gpio is not active. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11Merge tag 'nfc-next-4.7-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.7 pull request This is the first NFC pull request for 4.7. With this one we mainly have: - Support for NXP's pn532 NFC chipset. The pn532 is based on the same microcontroller as the pn533, but it talks to the host through i2c instead of USB. By separating the pn533 driver into core and PHY parts, we can not add the i2c layer and support the pn532 chipset. - Support for NCI's loopback mode. This is a testing mode where each packet received by the NFCC is sent back to the DH, allowing the host to test that the controller can receive and send data. - A few ACPI related fixes for the STMicro drivers, in order to match the device tree naming scheme. - A bunch of cleanups for the st-nci and the st21nfca STMicro drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: Move gpio reset into switch driverAndrew Lunn
Resetting the switch is something the driver does, not the framework. So move the parsing of this property into the driver. There are no in kernel users of this property, so moving it does not break anything. There is however a board which will make use of this property making its way into the kernel. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: Add mdio device support to Marvell switchesAndrew Lunn
Allow Marvell switches to be mdio devices. Currently the driver just allocate the private structure and detects what device is on the bus. Later patches will make them register with the DSA framework. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-05-07 Here are a few more Bluetooth patches for the 4.7 kernel: - NULL pointer fix in hci_intel driver - New Intel Bluetooth controller id in btusb driver - Added device tree binding documentation for Marvel's bt-sd8xxx - Platform specific wakeup interrupt support for btmrvl driver Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03Merge tag 'wireless-drivers-next-for-davem-2016-05-02' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers patches for 4.7 Major changes: brcmfmac * add support for nl80211 BSS_SELECT feature mwifiex * add platform specific wakeup interrupt support ath10k * implement set_tsf() for 10.2.4 branch * remove rare MSI range support * remove deprecated firmware API 1 support ath9k * add module parameter to invert LED polarity wcn36xx * fixes to get the driver properly working on Dragonboard 410c ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02Documentation: dtb: xgene: Add channel propertyIyappan Subramanian
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02dt: bindings: add MARVELL's bt-sd8xxx wireless deviceXinming Hu
Add device tree binding documentation for MARVELL's bluetooth sdio (sd8897 and sd8997) chip. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-05-01nfc: pn533: Add device tree documentation for i2c phyMichael Thalmeier
Add pn533-i2c phy devicetree documentation Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-04-29net: ethernet: enc28j60: add device tree supportMichael Heimpold
The following patch adds the required match table for device tree support (and while at, fix the indent). It's also possible to specify the MAC address in the DT blob. Also add the corresponding binding documentation file. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29Documentation: Bindings: Update DT binding for hns dsaf nodeYisen.Zhuang\(Zhuangyuzeng\)
This patch changes property port-id to reg in dsaf port node, removes property cpld-ctrl-reg, and fixes some typos. Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28dt: cpsw: phy-handle, phy_id, and fixed-link are mutually exclusiveDavid Rivshin
The phy-handle, phy_id, and fixed-link properties are mutually exclusive, and only one need be specified. Make this clear in the binding doc. Also mark the phy_id property as deprecated, as phy-handle should be used instead. Signed-off-by: David Rivshin <drivshin@allworx.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26dt: bindings: add MARVELL's sd8xxx wireless deviceXinming Hu
Add device tree binding documentation for MARVELL's sd8xxx (sd8897 and sd8997) wlan chip. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26Documentation: Bindings: add port-idx-in-ae for enet nodeYisen.Zhuang\(Zhuangyuzeng\)
This patch adds description for port-idx-in-ae attribute. Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 22:28:39 +0000