summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mtd
AgeCommit message (Collapse)Author
2020-09-14dt-bindings: mtd: gpmi-nand: Add i.MX 8M compatiblesKrzysztof Kozlowski
DTSes with new i.MX 8M SoCs introduce their own compatibles so add them to fix dtbs_check warnings like: arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: nand-controller@33002000: compatible:0: 'fsl,imx8mm-gpmi-nand' is not one of ['fsl,imx23-gpmi-nand', 'fsl,imx28-gpmi-nand', 'fsl,imx6q-gpmi-nand', 'fsl,imx6sx-gpmi-nand', 'fsl,imx7d-gpmi-nand'] From schema: Documentation/devicetree/bindings/mtd/gpmi-nand.yaml arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: nand-controller@33002000: compatible: ['fsl,imx8mm-gpmi-nand', 'fsl,imx7d-gpmi-nand'] is too long arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: nand-controller@33002000: compatible: Additional items are not allowed ('fsl,imx7d-gpmi-nand' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-14dt-bindings: Whitespace clean-ups in schema filesRob Herring
Clean-up incorrect indentation, extra spaces, long lines, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (which I plan to integrate into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-spi@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-09Merge tag 'mtd/for-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "MTD core changes: - Spelling - http to https updates NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4, TC58NVG0S3E, and TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC SPI NOR core changes: - Disable Quad Mode in spi_nor_restore(). - Don't abort BFPT parsing when QER reserved value is used. - Add support/update capabilities for few flashes. - Drop s70fl01gs flash: it does not support RDSR(05h) which is critical for erase/write. - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during the release cycle. SPI NOR controller drivers changes: - Move the cadence-quadspi driver to spi-mem. The series was taken through the SPI tree. Merge it also in spi-nor/next to avoid conflicts during the release cycle. - intel-spi: - Add new PCI IDs. - Ignore the Write Disable command, the controller doesn't support it. - Fix performance regression" * tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits) MTD: pfow.h: drop a duplicated word MTD: mtd-abi.h: drop a duplicated word mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones mtd: Replace HTTP links with HTTPS ones mtd: hyperbus: Replace HTTP links with HTTPS ones mtd: revert "spi-nor: intel: provide a range for poll_timout" mtd: spi-nor: update read capabilities for w25q64 and s25fl064k mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g mtd: spi-nor: macronix: Add support for mx66u2g45g mtd: spi-nor: intel-spi: Simulate WRDI command mtd: spi-nor: Disable the flash quad mode in spi_nor_restore() mtd: spi-nor: Add capability to disable flash quad mode mtd: spi-nor: spansion: Remove s70fl01gs from flash_info mtd: spi-nor: sfdp: do not make invalid quad enable fatal dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags mtd: rawnand: stm32_fmc2: get resources from parent node mtd: rawnand: stm32_fmc2: use regmap APIs memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation dt-bindings: mtd: update STM32 FMC2 NAND controller documentation ...
2020-08-07Merge tag 'nand/for-5.9' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next Core changes: * Drop useless 'depends on' in Kconfig * Add an extra level in the Kconfig hierarchy * Trivial spellings * Dynamic allocation of the interface configurations * Dropping the default ONFI timing mode * Various cleanup (types, structures, naming, comments) * Hide the chip->data_interface indirection * Add the generic rb-gpios property * Add the ->choose_interface_config() hook * Introduce nand_choose_best_sdr_timings() * Use default values for tPROG_max and tBERS_max * Avoid redefining tR_max and tCCS_min * Add a helper to find the closest ONFI mode * bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: * fsl-upm: Deprecation of specific DT properties * fsl_upm: Driver rework and cleanup in favor of ->exec_op() * Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use * brcmnand: ECC error handling on EDU transfers * brcmnand: Don't default to EDU transfers * qcom: Set BAM mode only if not set already * qcom: Avoid write to unavailable register * gpio: Driver rework in favor of ->exec_op() * tango: ->exec_op() conversion * mtk: ->exec_op() conversion Raw NAND chip drivers changes: * toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 * toshiba: Implement ->choose_interface_config() for TC58NVG0S3E * toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 * hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
2020-08-02mtd: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-07-31dt-bindings: mtd: Convert imx nand to json-schemaAnson Huang
Convert the i.MX nand controller binding to DT schema format using json-schema. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1596113004-15548-2-git-send-email-Anson.Huang@nxp.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-07-31dt-bindings: mtd: Convert gpmi nand to json-schemaAnson Huang
Convert the gpmi nand controller binding to DT schema format using json-schema. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1596113004-15548-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-07-07dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flagsBoris Brezillon
Those properties are no longer parsed by the driver which is being passed those information by the core now. Let's deprecate them. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200603134922.1352340-11-boris.brezillon@collabora.com
2020-07-07dt-bindings: mtd: update STM32 FMC2 NAND controller documentationChristophe Kerello
These bindings can be used on SOCs where the FMC2 NAND controller is in standalone. In case that the FMC2 embeds 2 controllers (an external bus controller and a raw NAND controller), the register base address, the clock and the reset will be defined in the parent node. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1591975362-22009-3-git-send-email-christophe.kerello@st.com
2020-06-26dt-bindings: mtd: nand: Document the generic rb-gpios propertyBoris Brezillon
A few drivers use this property to describe GPIO pins used to sample the NAND Ready/Busy state. Let's make it part of the generic binding doc. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200519232454.374081-2-boris.brezillon@collabora.com
2020-06-11dt-bindings: Fix more incorrect 'reg' property sizes in examplesRob Herring
The examples template is a 'simple-bus' with a size of 1 cell for had between 2 and 4 cells which really only errors on I2C or SPI type devices with a single cell. The easiest fix in most cases is to change the 'reg' property to 1 cell for address and size. Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: "David S. Miller" <davem@davemloft.net> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: linux-rockchip@lists.infradead.org Cc: linux-media@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: netdev@vger.kernel.org Cc: alsa-devel@alsa-project.org Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-10Merge tag 'mtd/for-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "MTD core changes: - partition parser: Support MTD names containing one or more colons. - mtdblock: clear cache_state to avoid writing to bad blocks repeatedly. Raw NAND core changes: - Stop using nand_release(), patched all drivers. - Give more information about the ECC weakness when not matching the chip's requirement. - MAINTAINERS updates. - Support emulated SLC mode on MLC NANDs. - Support "constrained" controllers, adapt the core and ONFI/JEDEC table parsing and Micron's code. - Take check_only into account. - Add an invalid ECC mode to discriminate with valid ones. - Return an enum from of_get_nand_ecc_algo(). - Drop OOB_FIRST placement scheme. - Introduce nand_extract_bits(). - Ensure a consistent bitflips numbering. - BCH lib: - Allow easy bit swapping. - Rework a little bit the exported function names. - Fix nand_gpio_waitrdy(). - Propage CS selection to sub operations. - Add a NAND_NO_BBM_QUIRK flag. - Give the possibility to verify a read operation is supported. - Add a helper to check supported operations. - Avoid indirect access to ->data_buf(). - Rename the use_bufpoi variables. - Fix comments about the use of bufpoi. - Rename a NAND chip option. - Reorder the nand_chip->options flags. - Translate obscure bitfields into readable macros. - Timings: - Fix default values. - Add mode information to the timings structure. Raw NAND controller driver changes: - Fixed many error paths. - Arasan - New driver - Au1550nd: - Various cleanups - Migration to ->exec_op() - brcmnand: - Misc cleanup. - Support v2.1-v2.2 controllers. - Remove unused including <linux/version.h>. - Correctly verify erased pages. - Fix Hamming OOB layout. - Cadence - Make cadence_nand_attach_chip static. - Cafe: - Set the NAND_NO_BBM_QUIRK flag - cmx270: - Remove this controller driver. - cs553x: - Misc cleanup - Migration to ->exec_op() - Davinci: - Misc cleanup. - Migration to ->exec_op() - Denali: - Add more delays before latching incoming data - Diskonchip: - Misc cleanup - Migration to ->exec_op() - Fsmc: - Change to non-atomic bit operations. - GPMI: - Use nand_extract_bits() - Fix runtime PM imbalance. - Ingenic: - Migration to exec_op() - Fix the RB gpio active-high property on qi, lb60 - Make qi_lb60_ooblayout_ops static. - Marvell: - Misc cleanup and small fixes - Nandsim: - Fix the error paths, driver wide. - Omap_elm: - Fix runtime PM imbalance. - STM32_FMC2: - Misc cleanups (error cases, comments, timeout valus, cosmetic changes). SPI NOR core changes: - Add, update support and fix few flashes. - Prepare BFPT parsing for JESD216 rev D. - Kernel doc fixes. CFI changes: - Support the absence of protection registers for Intel CFI flashes. - Replace zero-length array with flexible-arrays" * tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (208 commits) mtd: clear cache_state to avoid writing to bad blocks repeatedly mtd: parser: cmdline: Support MTD names containing one or more colons mtd: physmap_of_gemini: remove defined but not used symbol 'syscon_match' mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones mtd: rawnand: Return an enum from of_get_nand_ecc_algo() mtd: rawnand: Drop OOB_FIRST placement scheme mtd: rawnand: Avoid a typedef mtd: Fix typo in mtd_ooblayout_set_databytes() description mtd: rawnand: Stop using nand_release() mtd: rawnand: nandsim: Reorganize ns_cleanup_module() mtd: rawnand: nandsim: Rename a label in ns_init_module() mtd: rawnand: nandsim: Manage lists on error in ns_init_module() mtd: rawnand: nandsim: Fix the label pointing on nand_cleanup() mtd: rawnand: nandsim: Free erase_block_wear on error mtd: rawnand: nandsim: Use an additional label when freeing the nandsim object mtd: rawnand: nandsim: Stop using nand_release() mtd: rawnand: nandsim: Free the partition names in ns_free() mtd: rawnand: nandsim: Free the allocated device on error in ns_init() mtd: rawnand: nandsim: Free partition names on error in ns_init() mtd: rawnand: nandsim: Fix the two ns_alloc_device() error paths ...
2020-05-31dt-bindings: mtd: brcmnand: add v2.1 and v2.2 supportÁlvaro Fernández Rojas
Add brcm,brcmnand-v2.1 and brcm,brcmnand-v2.2 as possible compatible strings to support brcmnand controllers v2.1 and v2.2. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-5-noltari@gmail.com
2020-05-28dt-bindings: mtd: Convert ingenic,jz4780-nand.txt to YAMLPaul Cercueil
Convert the ingenic,jz4780-nand.txt doc file to ingenic,nand.yaml. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-24dt-bindings: mtd: Document ARASAN NAND bindingsMiquel Raynal
Document the Arasan NAND controller bindings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-7-miquel.raynal@bootlin.com
2020-05-11dt-bindings: mtd: partition: Document the slc-mode propertyBoris Brezillon
Add a boolean property to force a specific partition attached to an MLC NAND to be accessed in an emulated SLC mode this making this partition immune to paired-pages corruptions. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200503155341.16712-6-miquel.raynal@bootlin.com
2020-05-03dt-bindings: Remove cases of 'allOf' containing a '$ref'Rob Herring
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Scripted with ruamel.yaml with some manual fixups. Some minor whitespace changes from the script. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-16dt-bindings: Clean-up schema indentation formattingRob Herring
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-02Merge tag 'devicetree-for-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( * tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits) MAINTAINERS: drop an old reference to stm32 pwm timers doc MAINTAINERS: dt: update etnaviv file reference dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb dt-bindings: uniphier-system-bus: fix warning in the example dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints dt-bindings: power: Fix example for power-domain dt-bindings: arm: Add some constraints for PSCI nodes of: some unittest overlays not untracked of: gpio unittest kfree() wrong object dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml dt-bindings: serial: sh-sci: Convert to json-schema dt-bindings: serial: Document serialN aliases dt-bindings: thermal: tsens: Set 'additionalProperties: false' dt-bindings: thermal: tsens: Fix nvmem-cell-names schema dt-bindings: vendor-prefixes: Add Beacon vendor prefix dt-bindings: vendor-prefixes: Add Topwise of: of_private.h: Replace zero-length array with flexible-array member docs: dt: fix a broken reference to input.yaml docs: dt: fix references to ap806-system-controller.txt ...
2020-04-02Merge tag 'mtd/for-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD core changes: - Fix issue where write_cached_data() fails but write() still returns success - maps: sa1100-flash: Replace zero-length array with flexible-array member - phram: Fix a double free issue in error path - Convert fallthrough comments into statements - MAINTAINERS: Add the IRC channel to the MTD related subsystems Raw NAND core changes: - Add support for manufacturer specific suspend/resume operation - Add support for manufacturer specific lock/unlock operation - Replace zero-length array with flexible-array member - Fix a typo ("manufecturer") - Ensure nand_soft_waitrdy wait period is enough Raw NAND controller driver changes: - Brcmnand: * Add support for flash-edu for dma transfers (+ bindings) - Cadence: * Reinit completion before executing a new command * Change bad block marker size * Fix the calculation of the avaialble OOB size * Get meta data size from registers - Qualcom: * Use dma_request_chan() instead dma_request_slave_channel() * Release resources on failure within qcom_nandc_alloc() - Allwinner: * Use dma_request_chan() instead dma_request_slave_channel() - Marvell: * Use dma_request_chan() instead dma_request_slave_channel() * Release DMA channel on error - Freescale: * Use dma_request_chan() instead dma_request_slave_channel() - Macronix: * Add support for Macronix NAND randomizer (+ bindings) - Ams-delta: * Rename structures and functions to gpio_nand* * Make the driver custom I/O ready * Drop useless local variable * Support custom driver initialisation * Add module device tables * Handle more GPIO pins as optional * Make read pulses optional * Don't hardcode read/write pulse widths * Push inversion handling to gpiolib * Enable OF partition info support * Drop board specific partition info * Use struct gpio_nand_platdata * Write protect device during probe - Ingenic: * Use devm_platform_ioremap_resource() * Add dependency on MIPS || COMPILE_TEST - Denali: * Deassert write protect pin - ST: * Use dma_request_chan() instead dma_request_slave_channel() Raw NAND chip driver changes: - Toshiba: * Support reading the number of bitflips for BENAND (Built-in ECC NAND) - Macronix: * Add support for deep power down mode * Add support for block protection SPI-NAND core changes: - Do not erase the block before writing a bad block marker - Explicitly use MTD_OPS_RAW to write the bad block marker to OOB - Stop using spinand->oobbuf for buffering bad block markers - Rework detect procedure for different READ_ID operation SPI-NAND driver changes: - Toshiba: * Support for new Kioxia Serial NAND * Rename function name to change suffix and prefix (8Gbit) * Add comment about Kioxia ID - Micron: * Add new Micron SPI NAND devices with multiple dies * Add M70A series Micron SPI NAND devices * identify SPI NAND device with Continuous Read mode * Add new Micron SPI NAND devices * Describe the SPI NAND device MT29F2G01ABAGD * Generalize the OOB layout structure and function names SPI NOR core changes: - Move all the manufacturer specific quirks/code out of the core, to make the core logic more readable and thus ease maintenance. - Move the SFDP logic out of the core, it provides a better separation between the SFDP parsing and core logic. - Trim what is exposed in spi-nor.h. The SPI NOR controllers drivers must not be able to use structures that are meant just for the SPI NOR core. - Use the spi-mem direct mapping API to let advanced controllers optimize the read/write operations when they support direct mapping. - Add generic formula for the Status Register block protection handling. It fixes some long standing locking limitations and eases the addition of the 4bit block protection support. - Add block protection support for flashes with 4 block protection bits in the Status Register. SPI NOR controller drivers changes: - The mtk-quadspi driver is replaced by the new spi-mem spi-mtk-nor driver. - Merge tag 'mtk-mtd-spi-move' into spi-nor/next to avoid conflicts. HyperBus changes: - Print error msg when compatible is wrong or missing - Move mapping of direct access window from core to individual drivers" * tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (103 commits) mtd: Convert fallthrough comments into statements mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND) MAINTAINERS: Add the IRC channel to the MTD related subsystems mtd: Fix issue where write_cached_data() fails but write() still returns success mtd: maps: sa1100-flash: Replace zero-length array with flexible-array member mtd: phram: fix a double free issue in error path mtd: spinand: toshiba: Support for new Kioxia Serial NAND mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit) mtd: rawnand: macronix: Add support for deep power down mode mtd: rawnand: Add support for manufacturer specific suspend/resume operation mtd: spi-nor: Enable locking for n25q512ax3/n25q512a mtd: spi-nor: Add SR 4bit block protection support mtd: spi-nor: Add generic formula for SR block protection handling mtd: spi-nor: Set all BP bits to one when lock_len == mtd->size mtd: spi-nor: controllers: aspeed-smc: Replace zero-length array with flexible-array member mtd: spi-nor: Clear WEL bit when erase or program errors occur MAINTAINERS: update entry after SPI NOR controller move mtd: spi-nor: Trim what is exposed in spi-nor.h mtd: spi-nor: Drop the MFR definitions mtd: spi-nor: Get rid of the now empty spi_nor_ids[] table ...
2020-03-30Merge tag 'nand/for-5.7' into mtd/nextMiquel Raynal
Raw NAND core changes: * Add support for manufacturer specific suspend/resume operation * Add support for manufacturer specific lock/unlock operation * Replace zero-length array with flexible-array member * Fix a typo ("manufecturer") * Ensure nand_soft_waitrdy wait period is enough Raw NAND controller driver changes: * Brcmnand: Add support for flash-edu for dma transfers (+ bindings) * Cadence: Reinit completion before executing a new command Change bad block marker size Fix the calculation of the avaialble OOB size Get meta data size from registers * Qualcom: Use dma_request_chan() instead dma_request_slave_channel() Release resources on failure within qcom_nandc_alloc() * Allwinner: Use dma_request_chan() instead dma_request_slave_channel() * Marvell: Use dma_request_chan() instead dma_request_slave_channel() Release DMA channel on error * Freescale: Use dma_request_chan() instead dma_request_slave_channel() * Macronix: Add support for Macronix NAND randomizer (+ bindings) * Ams-delta: Rename structures and functions to gpio_nand* Make the driver custom I/O ready Drop useless local variable Support custom driver initialisation Add module device tables Handle more GPIO pins as optional Make read pulses optional Don't hardcode read/write pulse widths Push inversion handling to gpiolib Enable OF partition info support Drop board specific partition info Use struct gpio_nand_platdata Write protect device during probe * Ingenic: Use devm_platform_ioremap_resource() Add dependency on MIPS || COMPILE_TEST * Denali: Deassert write protect pin * ST: Use dma_request_chan() instead dma_request_slave_channel() Raw NAND chip driver changes: * Toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND) * Macronix: Add support for deep power down mode Add support for block protection SPI-NAND core changes: * Do not erase the block before writing a bad block marker * Explicitly use MTD_OPS_RAW to write the bad block marker to OOB * Stop using spinand->oobbuf for buffering bad block markers * Rework detect procedure for different READ_ID operation SPI-NAND driver changes: * Toshiba: Support for new Kioxia Serial NAND Rename function name to change suffix and prefix (8Gbit) Add comment about Kioxia ID * Micron: Add new Micron SPI NAND devices with multiple dies Add M70A series Micron SPI NAND devices identify SPI NAND device with Continuous Read mode Add new Micron SPI NAND devices Describe the SPI NAND device MT29F2G01ABAGD Generalize the OOB layout structure and function names
2020-03-27Merge branch 'spi-5.7' into spi-nextMark Brown
2020-03-11dt-bindings: convert mtk-quadspi binding doc for spi-mtk-norChuanhong Guo
spi-mtk-nor is a driver to replace mtk-quadspi and they have almost the same device-tree bindings. Reuse this binding documentation and convert it for new driver: 1. "Mediatek SoCs" -> "Mediatek ARM SoCs" because MTK MIPS SoCs use different controllers. 2. document "interrupts" as a required property because it's available on all SoCs with this controller and new driver takes advantages of it. It's implemented as optional only to maintain backward compatibility. 3. add a dummy interrupt binding in example. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-4-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-11dt: bindings: brcmnand: Add support for flash-eduKamal Dasu
Adding support for EBI DMA unit (EDU). Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200122213313.35820-2-kdasu.kdev@gmail.com
2020-03-11dt-bindings: mtd: Document Macronix NAND device bindingsMason Yang
Document the bindings used by the Macronix NAND device. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Reviewed-by: Rob Herring <robh@kernel.org> [<miquel.raynal@bootlin.com: Fix typos] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1581922600-25461-3-git-send-email-masonccyang@mxic.com.tw
2020-03-10Merge branch 'dt/linus' into dt/nextRob Herring
2020-02-27dt-bindings: mtd: Convert Denali NAND controller to json-schemaMasahiro Yamada
Convert the Denali NAND controller binding to DT schema format. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-24docs: dt: fix several broken doc referencesMauro Carvalho Chehab
There are several DT doc references that require manual fixes. I found 3 cases fixed on this patch: - directory named "binding/" instead of "bindings/"; - .txt to .yaml renames; - file renames (still on txt format); Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-08Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-01-21dt-bindings: mtd: denali_dt: document reset propertyMasahiro Yamada
According to the Denali NAND Flash Memory Controller User's Guide, this IP has two reset signals. rst_n: reset most of FFs in the controller core reg_rst_n: reset all FFs in the register interface, and in the initialization sequencer This commit specifies these reset signals. It is possible to control them separately from the IP point of view although they might be often tied up together in actual SoC integration. At least for the upstream platforms, Altera/Intel SOCFPGA and Socionext UniPhier, the reset controller seems to provide only 1-bit control for the NAND controller. If it is the case, the resets property should reference to the same phandles for "nand" and "reg" resets, like this: resets = <&nand_rst>, <&nand_rst>; reset-names = "nand", "reg"; Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-19Merge tag 'at91-5.6-dt-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.6 #2 - Add sam9x60 dtsi - New board sam9x60 Evaluation Kit * tag 'at91-5.6-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60: add device tree for soc and board dt-bindings: arm: add sam9x60-ek board dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr dt-bindings: atmel-smc: add microchip,sam9x60-smc dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc dt-bindings: atmel-nand: add microchip,sam9x60-pmecc dt-bindings: atmel-matrix: add microchip,sam9x60-matrix dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc dt-bindings: atmel-isi: add microchip,sam9x60-isi dt-bindings: atmel-can: add microchip,sam9x60-can dt-bindings: at_xdmac: add microchip,sam9x60-dma dt-bindings: at_xdmac: remove wildcard Link: https://lore.kernel.org/r/20200119234707.GA90094@piout.net Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-14dt-bindings: atmel-nand: add microchip,sam9x60-pmeccClaudiu Beznea
Add microchip,sam9x60-pmecc to DT bindings documentation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1578673089-3484-9-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-12dt-bindings: Change maintainer addressMaxime Ripard
While my email address has changed for a while, all the schemas I contributed still have the old one unfortunately. Update it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org>
2019-12-02Merge tag 'devicetree-for-5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot, syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar, Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue, Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404 interconnect, Unisoc/Spreadtrum SoCs and UART - Convert a bunch of Samsung bindings to DT schema - Convert a bunch of ST stm32 bindings to DT schema - Realtek and Exynos additions to Arm Mali bindings - Fix schema errors in RiscV CPU schema - Various schema fixes from improved meta-schema checks - Improve the handling of 'dma-ranges' and in particular fix DMA mask setup on PCI bridges - Fix a memory leak in add_changeset_property() and DT unit tests. - Several documentation improvements for schema validation - Rework build rules to improve schema validation errors - Color output for dtx_diff * tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits) libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h dt-bindings: arm: Remove leftover axentia.txt of: unittest: fix memory leak in attach_node_and_children of: overlay: add_changeset_property() memory leak dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems dt-bindings: power: Rename back power_domain.txt bindings to fix references dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema dt-bindings: remoteproc: convert stm32-rproc to json-schema dt-bindings: mailbox: convert stm32-ipcc to json-schema dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema dt-bindings: interrupt-controller: Convert stm32-exti to json-schema dt-bindings: crypto: Convert stm32 HASH bindings to json-schema dt-bindings: rng: Convert stm32 RNG bindings to json-schema dt-bindings: pwm: Convert Samsung PWM bindings to json-schema dt-bindings: pwm: Convert PWM bindings to json-schema dt-bindings: serial: Add a new compatible string for SC9863A dt-bindings: serial: Convert sprd-uart to json-schema dt-bindings: arm: Add bindings for Unisoc SC9863A ...
2019-11-21dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schemaBenjamin Gaignard
Convert the STM32 fmc2-nand binding to DT schema format using json-schema Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> CC: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-11-17Merge tag 'nand/for-5.5' into mtd/nextMiquel Raynal
Raw NAND core * Useless extra checks dropped. * Updated the detection of the bad block markers position Raw NAND controller drivers: * Cadence : New driver * Brcmnand: Support for flash-dma v0 + fixes * Denali : Support for the legacy controller/chip DT representation dropped * Superfluous dev_err() calls removed
2019-10-29mtd: add DT bindings for the Intel IXP4xx FlashLinus Walleij
This adds device tree bindings for the Intel IXP4xx flash controller, a simple physmap which however need a specific big-endian or mixed-endian access pattern to the memory. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-04dt-bindings: mtd: Add Cadence NAND controller driverPiotr Sroka
Document the bindings used by Cadence NAND controller driver Signed-off-by: Piotr Sroka <piotrs@cadence.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-26dt-bindings: mtd: Document Macronix raw NAND controller bindingsMason Yang
Document the bindings used by the Macronix raw NAND controller. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-20dt-bindings: Ensure child nodes are of type 'object'Rob Herring
Properties which are child node definitions need to have an explict type. Otherwise, a matching (DT) property can silently match when an error is desired. Fix this up tree-wide. Once this is fixed, the meta-schema will enforce this on any child node definitions. Cc: Chen-Yu Tsai <wens@csie.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-spi@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-13Merge tag 'mtd/for-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...
2019-07-07Merge tag 'spi-nor/for-5.3-v2' of ↵Miquel Raynal
gitolite.kernel.org:pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control
2019-07-06Merge tag 'nand/for-5.3' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: * fix BCH ECC layout for large page NAND parts * fallback to detected ecc-strength, ecc-step-size * when oops in progress use pio and interrupt polling * code refactor code to introduce helper functions * add support for v7.3 controller - FSMC: * use nand_op_trace for operation tracing - GPMI: * move all driver code into single file * various cleanups (including dmaengine changes) * use runtime PM to manage clocks * implement exec_op - MTK: * correct low level time calculation of r/w cycle * improve data sampling timing for read cycle * add validity check for CE# pin setting * fix wrongly assigned OOB buffer pointer issue * re-license MTK NAND driver as Dual MIT/GPL - STM32: * manage the get_irq error case * increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips
2019-06-28dt-bindings: mtd: sunxi-nand: Drop 'maxItems' from child 'reg' propertyRob Herring
Mixing 'maxItems' and scalar properties doesn't make much sense, so drop 'maxItems' as a single item is implied. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-mtd@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org>
2019-06-27dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 supportKamal Dasu
Added brcm,brcmnand-v7.3 as possible compatible string to support brcmnand controller v7.3. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dt-bindings: mtd: brcmnand: Make nand-ecc-strength and nand-ecc-step-size ↵Kamal Dasu
optional nand-ecc-strength and nand-ecc-step-size can be made optional as brcmnand driver can support using raw NAND layer detected values. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dt-bindings: mtd: Add bindings for TI's AM654 HyperBus memory controllerVignesh Raghavendra
Add binding documentation for TI's HyperBus memory controller present on AM654 SoC. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dt-bindings: mtd: Add binding documentation for HyperFlashVignesh Raghavendra
Add DT binding documentation for HyperFlash devices. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dt-bindings: cadence-quadspi: add options reset propertyDinh Nguyen
The QSPI module can have an optional reset signals that will hold the module in a reset state. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-06-07mtd: spi-nor: stm32: remove the driver as it was replaced by spi-stm32-qspi.cLudovic Barre
There's a new driver using the SPI memory interface of the SPI framework at spi/spi-stm32-qspi.c, which can be used together with m25p80.c to replace the functionality of this SPI NOR driver. The "new" driver uses the same dt properties and not affects the legacy compatibility. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 10:27:48 +0000