| Age | Commit message (Collapse) | Author |
|---|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200526060544.25127-1-grandmaster@al2klimov.de
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The building system can auto-generate a list of documents since
commit: 9d42afbe6bd4 ("docs: pdf: add all Documentation/*/index.rst to PDF output").
The added logic there allows keeping the existing list, but
there's not real reason to keep it. Now, the media document
has gone (it was split into tree).
So, it sounds about time to get rid of the manual entries,
and let the script to generate it automatically instead.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9345dba7164497dbf28578f6ec271e479379610c.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The autosectionlabel extension is nice, as it allows to refer to
a section by its name without requiring any extra tag to create
a reference name.
However, on its default, it has two serious problems:
1) the namespace is global. So, two files with different
"introduction" section would create a label with the
same name. This is easily solvable by forcing the extension
to prepend the file name with:
autosectionlabel_prefix_document = True
2) It doesn't work hierarchically. So, if there are two level 1
sessions (let's say, one labeled "open" and another one "ioctl")
and both have a level 2 "synopsis" label, both section 2 will
have the same identical name.
Currently, there's no way to tell Sphinx to create an
hierarchical reference like:
open / synopsis
ioctl / synopsis
This causes around 800 warnings. So, the fix should be to
not let autosectionlabel to produce references for anything
that it is not at a chapter level within any doc, with:
autosectionlabel_maxdepth = 2
Fixes: 58ad30cf91f0 ("docs: fix reference to core-api/namespaces.rst")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/74f4d8d91c648d7101c45b4b99cc93532f4dadc6.1584716446.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Fix a couple of dangling links to core-api/namespaces.rst by turning them
into proper references. Enable the autosection extension (available since
Sphinx 1.4) to make this work.
Co-developed-by: Federico Vaga <federico.vaga@vaga.pv.it>
Fixes: fcfacb9f8374 ("doc: move namespaces.rst from kbuild/ to core-api/")
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
In order to have the MAINTAINERS file visible in the rendered ReST
output, this makes some small changes to the existing MAINTAINERS file
to allow for better machine processing, and adds a new Sphinx directive
"maintainers-include" to perform the rendering.
Features include:
- Per-subsystem reference links: subsystem maintainer entries can be
trivially linked to both internally and external. For example:
https://www.kernel.org/doc/html/latest/process/maintainers.html#secure-computing
- Internally referenced .rst files are linked so they can be followed
when browsing the resulting rendering. This allows, for example, the
future addition of maintainer profiles to be automatically linked.
- Field name expansion: instead of the short fields (e.g. "M", "F",
"K"), use the indicated inline "full names" for the fields (which are
marked with "*"s in MAINTAINERS) so that a rendered subsystem entry
is more human readable. Email lists are additionally comma-separated.
For example:
SECURE COMPUTING
Mail: Kees Cook <keescook@chromium.org>
Reviewer: Andy Lutomirski <luto@amacapital.net>,
Will Drewry <wad@chromium.org>
SCM: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git seccomp
Status: Supported
Files: kernel/seccomp.c include/uapi/linux/seccomp.h
include/linux/seccomp.h tools/testing/selftests/seccomp/*
tools/testing/selftests/kselftest_harness.h
userspace-api/seccomp_filter
Content regex: \bsecure_computing \bTIF_SECCOMP\b
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
If we try to build a book with asian characters with XeLaTeX
and the font is not available, it will produce an error.
So, instead, add a logic at conf.py to detect if the proper
font is installed.
This will avoid an error while building the document, although
the result may not be readable.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
In order to be able to output Asian symbols with XeLaTeX, we
need the xeCJK package, and a default font for CJK symbols.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Currently, all index files should be manually added to the
latex_documents array at conf.py.
While this allows fine-tuning some LaTeX specific things, like
the name of the output file and the name of the document, it
is not uncommon to forget adding new documents there.
So, add a logic that will seek for all Documentation/*/index.rst.
If the index is not yet at latex_documents, it includes using
a reasonable default.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The handling of dashes in particular results in confusing
documentation in a number of instances, since "--" becomes an
en-dash. This disables SmartyPants wholesale, losing smart quotes
along with smart dashes.
With Sphinx 1.6 we could fine-tune the conversion, using the new
smartquotes and smartquotes_action settings.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Rather than fill our text files with :c:func:`function()` syntax, just do
the markup via a hook into the sphinx build process.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Our version check in Documentation/conf.py never envisioned a world where
Sphinx moved beyond 1.x. Now that the unthinkable has happened, fix our
version check to handle higher version numbers correctly.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull documentation updates from Jonathan Corbet:
"This is a fairly typical cycle for documentation. There's some welcome
readability improvements for the formatted output, some LICENSES
updates including the addition of the ISC license, the removal of the
unloved and unmaintained 00-INDEX files, the deprecated APIs document
from Kees, more MM docs from Mike Rapoport, and the usual pile of typo
fixes and corrections"
* tag 'docs-4.20' of git://git.lwn.net/linux: (41 commits)
docs: Fix typos in histogram.rst
docs: Introduce deprecated APIs list
kernel-doc: fix declaration type determination
doc: fix a typo in adding-syscalls.rst
docs/admin-guide: memory-hotplug: remove table of contents
doc: printk-formats: Remove bogus kobject references for device nodes
Documentation: preempt-locking: Use better example
dm flakey: Document "error_writes" feature
docs/completion.txt: Fix a couple of punctuation nits
LICENSES: Add ISC license text
LICENSES: Add note to CDDL-1.0 license that it should not be used
docs/core-api: memory-hotplug: add some details about locking internals
docs/core-api: rename memory-hotplug-notifier to memory-hotplug
docs: improve readability for people with poorer eyesight
yama: clarify ptrace_scope=2 in Yama documentation
docs/vm: split memory hotplug notifier description to Documentation/core-api
docs: move memory hotplug description into admin-guide/mm
doc: Fix acronym "FEKEK" in ecryptfs
docs: fix some broken documentation references
iommu: Fix passthrough option documentation
...
|
|
My eyesight is not in good shape, which means that I have difficulty
reading the online Linux documentation. Specifically, body text is
oddly small compared to list items and the contrast of various text
elements is too low for me to be able to see easily.
Therefore, alter the HTML theme overrides to make the text larger and
increase the contrast for better visibility, and trust the typeface
choices of the reader's browser.
For the PDF output, increase the text size, use a sans-serif typeface
for sans-serif text, and use a serif typeface for "roman" serif text.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Move the ext4 data structures book to Documentation/filesystems/ext4/
since the administrative information moved elsewhere.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Move the ext4 mount option and other administrative stuff to the Linux
administrator's guide.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The documentation build scripts won't build a pdf for the ext4
documentation unless explicitly called for, so ask for a separate
ext4.pdf to be generated with all the documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Import the chapter about inode data fork from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This warning will happen for every normal kernel docs build and doesn't
carry any useful information. Should anybody actually depend on this
"version" variable (which isn't clear to me), the "unknown version" value
will be clue enough.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Only the media PDF book was requiring adjustbox, in order to
scale big tables. That worked pretty good with Sphinx versions
1.4 and 1.5, but Spinx 1.6 changed the way tables are produced,
by introducing some weird macros before tabulary.
That causes adjustbox to fail. So, it can't be used anymore,
and its usage was removed from the media book.
So, let's remove it from conf.py and sphinx-pre-install.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Sphinx 1.5 added a new way to change backward colors for note
boxes, but kept backward compatibility with 1.4. On Sphinx 1.6,
the old way stopped working, in favor of a new less hackish
way.
Unfortunately, this is currently too buggy to be used, and
the old way doesn't work anymore. So, we have no option but
to stick with boring notice boxes.
One example of such bug is the notice that it is inside
struct v4l2_plane, at the "bytesused" field.
At least, add a notice about how to use, as maybe some day
the bug will vanish.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Only the media book used this extension in the past, but
it is not required anymore.
Cleanup patch only.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
On Sphinx 1.6, fancy boxes are used for verbatim. The sphinx.sty
sets verbatim font is always \small. That causes a problem
inside tables that use smaller fonts, as it can be too big for
the box.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
according to what Documentation/doc-guide/sphinx.rst says::
The ReST markups currently used by the Documentation/ files
are meant to be built with ``Sphinx`` version 1.3 or upper.
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Currently, on Sphinx up to version 1.4, pdf output uses a vertical
margin of 1 inch. For upper versions, it uses a margin of 0.5 inches.
That causes both page headers and footers to be very close to the margin
of the sheet. Not all printers support writing like that.
Also, there's no reason why the layout for newer versions would be
different than for previous ones.
So, standardize it, by always setting to 1 inch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Commit 85c21e5c3ee7 (docs-rst: better adjust margins and font size) added a
\usepackage{geometry} that conflicts with another inclusion deep within the
dependencies with newer versions of Sphinx, causing the the PDF build to fail
with a "conflicting parameters" error.
Detect the Sphinx version, using sphinxsetup for Sphinx versions 1.5 and
upper.
Fixes: 85c21e5c3ee74fb75d690c57f7066bae7e2dca55
[jc: Tweaked logic to exclude 1.5.x for x < 3 ]
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Otherwise we get PDF build failures when LaTeX refused to acknowledge the
existence of \ifthenelse
Fixes: 41cff161fe99d1c6a773becc2250a1dc3ac035ff
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The userspace API book was added without the bits required to
generate PDF output. Add them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The sound subsystem book was added without the bits required to
generate PDF output. Add them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The dev-tools API book was added without the bits required to
generate PDF output at the main conf.py. Add them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The crypto API book was added without the bits required to
generate PDF output. Add them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There's no kernel-documentation.rst file at Documentation/
anymore. So, remove it from the list of LaTeX-generated
documents.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
As we add more documents, it makes more sense to sort the
entries there in alphabetical order, as it makes easier to
check if something is not there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
As kdbg.rst uses the ".. important::" annotation, let's define a
color for PDF output.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
- Manually adjusted to use ..note and ..warning
- Minor fixes for it to be parsed without errors
- Use **bold** for emphasis.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:
- a big update from Mauro converting input documentation to ReST format
- Synaptics PS/2 is now aware of SMBus companion devices, which means
that we can now use native RMI4 protocol to handle touchpads, instead
of relying on legacy PS/2 mode.
- we removed support from BMA180 accelerometer from input devices as it
is now handled properly by IIO
- update to TSC2007 to corretcly report pressure
- other miscellaneous driver fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits)
Input: ar1021_i2c - use BIT to check for a bit
Input: twl4030-pwrbutton - use input_set_capability() helper
Input: twl4030-pwrbutton - use correct device for irq request
Input: ar1021_i2c - enable touch mode during open
Input: add uinput documentation
dt-bindings: input: add bindings document for ar1021_i2c driver
dt-bindings: input: rotary-encoder: fix typo
Input: xen-kbdfront - add module parameter for setting resolution
ARM: pxa/raumfeld: fix compile error in rotary controller resources
Input: xpad - do not suggest writing to Dominic
Input: xpad - don't use literal blocks inside footnotes
Input: xpad - note that usb/devices is now at /sys/kernel/debug/
Input: docs - freshen up introduction
Input: docs - split input docs into kernel- and user-facing
Input: docs - note that MT-A protocol is obsolete
Input: docs - update joystick documentation a bit
Input: docs - remove disclaimer/GPL notice
Input: fix "Game console" heading level in joystick documentation
Input: rotary-encoder - remove references to platform data from docs
Input: move documentation for Amiga CD32
...
|
|
Now that all files under Documentation/input follows the ReST markup
language, rename them to *.rst and create a book for the Linux Input
subsystem.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Using the development version of sphinx caused the parsing of the
version to fail.
Signed-off-by: Rémy Léone <remy.leone@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This patch brings scalable figure, image handling and a concept to
embed *render* markups:
* DOT (http://www.graphviz.org)
* SVG
For image handling use the 'image' replacement::
.. kernel-image:: svg_image.svg
:alt: simple SVG image
For figure handling use the 'figure' replacement::
.. kernel-figure:: svg_image.svg
:alt: simple SVG image
SVG image example
Embed *render* markups (or languages) like Graphviz's **DOT** is
provided by the *render* directive.::
.. kernel-render:: DOT
:alt: foobar digraph
:caption: Embedded **DOT** (Graphviz) code.
digraph foo {
"bar" -> "baz";
}
The *render* directive is a concept to integrate *render* markups and
languages, yet supported markups:
* DOT: render embedded Graphviz's **DOT**
* SVG: render embedded Scalable Vector Graphics (**SVG**)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Tested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> (v2 - v5)
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de> (v1, v6)
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
With Sphinx 1.5.3 I get the warning:
WARNING: primary_domain 'C' not found, ignored.
It seems that domain names in Sphinx are case-sensitive and for the C
domain the name must be lower case.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
It had gone stale, of course, as it would every year, a single date doesn't
really cover things, and the date isn't really needed anyway.
|
|
Having the kernel-documentation at the topmost level doesn't
allow generating a separate PDF file for it. Also, makes harder
to add extra contents. So, place it on a sub-dir.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
There were a few manuals that weren't being built in PDF format, but
there's no reason not to...
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
PDF build on Kernel 4.9-rc? returns an error with Sphinx 1.3.x
and Sphinx 1.4.x, when trying to solve some cross-references.
The solution is to redefine the \DURole macro.
However, this is redefined too late. Move such redefinition to
LaTeX preamble and bind it to just the Sphinx versions where the
error is known to be present.
Tested by building the documentation on interactive mode:
make PDFLATEX=xelatex -C Documentation/output/./latex
Fixes: e61a39baf74d ("[media] index.rst: Fix LaTeX error in interactive mode on Sphinx 1.4.x")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Set the default highlight language to "none", i.e. do not try to guess
the language and do automatic syntax highlighting on literal blocks.
Eyeballing around the generated documentation, we don't seem to actually
have a lot of literal blocks that would benefit from syntax
highlighting. The C code blocks we do have are typically very short, and
most of the literal blocks are things that shouldn't be highlighted (or,
do not have a pygments lexer). This seems to be true for literal blocks
both in the rst source files and in source code comments.
Not highlighting code is never wrong, but guessing the language wrong
almost invariably leads to silly or confusing highlighting.
At the time of writing, admin-guide/oops-tracing.rst and
admin-guide/ramoops.rst contain good examples of 1) a small C code
snippet not highlighted, 2) a hex dump highligted as who knows what, 3)
device tree block highlighted as C or maybe Python, 4) a terminal
interaction highlighted as code in some language, and finally, 5) some C
code snippets correctly identified as C. I think we're better off
disabling language guessing, and going by explicitly identified
languages for longer code blocks.
It is still possible to enable highlighting on an rst source file basis
using the highlight directive:
.. higlight:: language
and on a literal block basis using the code-block directive:
.. code-block:: language
See http://www.sphinx-doc.org/en/latest/markup/code.html for details.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Fix the warning:
WARNING: "latex_documents" config value references unknown document
user/index
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Place README, REPORTING-BUGS, SecurityBugs and kernel-parameters
on an user's manual book.
As we'll be numbering the user's manual, remove the manual
numbering from SecurityBugs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
As we'll type this a lot, after adding CodingStyle & friends,
let's rename the directory name to a shorter one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
