summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-13usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-defaultBadhri Jagan Sridharan
This is a regression introduced by 1373fefc6243 ("usb: typec: tcpm: Allow slow charging loops to comply to pSnkStby") When Source advertises Rp-default, tcpm would request 500mA when in SINK_DISCOVERY, Type-C spec advises the sink to follow BC1.2 current limits when Rp-default is advertised. [12750.503381] Requesting mux state 1, usb-role 2, orientation 1 [12750.503837] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [12751.003891] state change SNK_STARTUP -> SNK_DISCOVERY [12751.003900] Setting voltage/current limit 5000 mV 500 mA This patch restores the behavior where the tcpm would request 0mA when Rp-default is advertised by the source. [   73.174252] Requesting mux state 1, usb-role 2, orientation 1 [   73.174749] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [   73.674800] state change SNK_STARTUP -> SNK_DISCOVERY [   73.674808] Setting voltage/current limit 5000 mV 0 mA During SNK_DISCOVERY, Cap the current limit to PD_P_SNK_STDBY_MW / 5 only for slow_charger_loop case. Fixes: 1373fefc6243 ("usb: typec: tcpm: Allow slow charging loops to comply to pSnkStby") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20210510211756.3346954-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13xhci: Add reset resume quirk for AMD xhci controller.Sandeep Singh
One of AMD xhci controller require reset on resume. Occasionally AMD xhci controller does not respond to Stop endpoint command. Once the issue happens controller goes into bad state and in that case controller needs to be reset. Cc: <stable@vger.kernel.org> Signed-off-by: Sandeep Singh <sandeep.singh@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13usb: xhci: Increase timeout for HC haltMaximilian Luz
On some devices (specifically the SC8180x based Surface Pro X with QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding the xhci-hcd driver at some point later does not exhibit this behavior. To work around this, double XHCI_MAX_HALT_USEC, which also resolves this issue. Cc: <stable@vger.kernel.org> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13xhci: Do not use GFP_KERNEL in (potentially) atomic contextChristophe JAILLET
'xhci_urb_enqueue()' is passed a 'mem_flags' argument, because "URBs may be submitted in interrupt context" (see comment related to 'usb_submit_urb()' in 'drivers/usb/core/urb.c') So this flag should be used in all the calling chain. Up to now, 'xhci_check_maxpacket()' which is only called from 'xhci_urb_enqueue()', uses GFP_KERNEL. Be safe and pass the mem_flags to this function as well. Fixes: ddba5cd0aeff ("xhci: Use command structures when queuing commands on the command ring") Cc: <stable@vger.kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13xhci: Fix giving back cancelled URBs even if halted endpoint can't resetMathias Nyman
Commit 9ebf30007858 ("xhci: Fix halted endpoint at stop endpoint command completion") in 5.12 changes how cancelled URBs are given back. To cancel a URB xhci driver needs to stop the endpoint first. To clear a halted endpoint xhci driver needs to reset the endpoint. In rare cases when an endpoint halt (error) races with a endpoint stop we need to clear the reset before removing, and giving back the cancelled URB. The above change in 5.12 takes care of this, but it also relies on the reset endpoint completion handler to give back the cancelled URBs. There are cases when driver refuses to queue reset endpoint commands, for example when a link suddenly goes to an inactive error state. In this case the cancelled URB is never given back. Fix this by giving back the URB in the stop endpoint if queuing a reset endpoint command fails. Fixes: 9ebf30007858 ("xhci: Fix halted endpoint at stop endpoint command completion") CC: <stable@vger.kernel.org> # 5.12 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCIAbhijeet Rao
In the same way as Intel Tiger Lake TCSS (Type-C Subsystem) the Alder Lake TCSS xHCI needs to be runtime suspended whenever possible to allow the TCSS hardware block to enter D3cold and thus save energy. Cc: stable@vger.kernel.org Signed-off-by: Abhijeet Rao <abhijeet.rao@intel.com> Signed-off-by: Nikunj A. Dadhania <nikunj.dadhania@intel.com> Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13x86, sched: Fix the AMD CPPC maximum performance value on certain AMD Ryzen ↵Huang Rui
generations Some AMD Ryzen generations has different calculation method on maximum performance. 255 is not for all ASICs, some specific generations should use 166 as the maximum performance. Otherwise, it will report incorrect frequency value like below: ~ → lscpu | grep MHz CPU MHz: 3400.000 CPU max MHz: 7228.3198 CPU min MHz: 2200.0000 [ mingo: Tidied up whitespace use. ] [ Alexander Monakov <amonakov@ispras.ru>: fix 225 -> 255 typo. ] Fixes: 41ea667227ba ("x86, sched: Calculate frequency invariance for AMD systems") Fixes: 3c55e94c0ade ("cpufreq: ACPI: Extend frequency tables to cover boost frequencies") Reported-by: Jason Bagavatsingham <jason.bagavatsingham@gmail.com> Fixed-by: Alexander Monakov <amonakov@ispras.ru> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Jason Bagavatsingham <jason.bagavatsingham@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210425073451.2557394-1-ray.huang@amd.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211791 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-05-13erofs: fix 1 lcluster-sized pcluster for big pclusterGao Xiang
If the 1st NONHEAD lcluster of a pcluster isn't CBLKCNT lcluster type rather than a HEAD or PLAIN type instead, which means its pclustersize _must_ be 1 lcluster (since its uncompressed size < 2 lclusters), as illustrated below: HEAD HEAD / PLAIN lcluster type ____________ ____________ |_:__________|_________:__| file data (uncompressed) . . .____________. |____________| pcluster data (compressed) Such on-disk case was explained before [1] but missed to be handled properly in the runtime implementation. It can be observed if manually generating 1 lcluster-sized pcluster with 2 lclusters (thus CBLKCNT doesn't exist.) Let's fix it now. [1] https://lore.kernel.org/r/20210407043927.10623-1-xiang@kernel.org Link: https://lore.kernel.org/r/20210510064715.29123-1-xiang@kernel.org Fixes: cec6e93beadf ("erofs: support parsing big pcluster compress indexes") Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <xiang@kernel.org>
2021-05-12hwmon: (adm9240) Fix writes into inX_max attributesGuenter Roeck
When converting the driver to use the devm_hwmon_device_register_with_info API, the wrong register was selected when writing into inX_max attributes. Fix it. Fixes: 124b7e34a5a6 ("hwmon: (adm9240) Convert to devm_hwmon_device_register_with_info API") Reported-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-12Merge tag 'docs-5.13-3' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A set of straightforward documentation fixes" * tag 'docs-5.13-3' of git://git.lwn.net/linux: Remove link to nonexistent rocket driver docs docs: networking: device_drivers: fix bad usage of UTF-8 chars docs: hwmon: tmp103.rst: fix bad usage of UTF-8 chars docs: ABI: remove some spurious characters docs: ABI: remove a meaningless UTF-8 character docs: cdrom-standard.rst: get rid of uneeded UTF-8 chars Documentation: drop optional BOMs docs/zh_CN: Remove obsolete translation file
2021-05-12Merge tag 'tpmdd-next-v5.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm fixes from Jarkko Sakkinen: "Bug fixes that have came up after the first pull request" * tag 'tpmdd-next-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: fix error return code in tpm2_get_cc_attrs_tbl() tpm, tpm_tis: Reserve locality in tpm_tis_resume() tpm, tpm_tis: Extend locality handling to TPM2 in tpm_tis_gen_interrupt() trusted-keys: match tpm_get_ops on all return paths KEYS: trusted: Fix memory leak on object td
2021-05-12x86/boot/compressed: Enable -WundefNick Desaulniers
A discussion around -Wundef showed that there were still a few boolean Kconfigs where #if was used rather than #ifdef to guard different code. Kconfig doesn't define boolean configs, which can result in -Wundef warnings. arch/x86/boot/compressed/Makefile resets the CFLAGS used for this directory, and doesn't re-enable -Wundef as the top level Makefile does. If re-added, with RANDOMIZE_BASE and X86_NEED_RELOCS disabled, the following warnings are visible. arch/x86/boot/compressed/misc.h:82:5: warning: 'CONFIG_RANDOMIZE_BASE' is not defined, evaluates to 0 [-Wundef] ^ arch/x86/boot/compressed/misc.c:175:5: warning: 'CONFIG_X86_NEED_RELOCS' is not defined, evaluates to 0 [-Wundef] ^ Simply fix these and re-enable this warning for this directory. Suggested-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20210422190450.3903999-1-ndesaulniers@google.com
2021-05-12ACPI: NFIT: Fix support for variable 'SPA' structure sizeDan Williams
ACPI 6.4 introduced the "SpaLocationCookie" to the NFIT "System Physical Address (SPA) Range Structure". The presence of that new field is indicated by the ACPI_NFIT_LOCATION_COOKIE_VALID flag. Pre-ACPI-6.4 firmware implementations omit the flag and maintain the original size of the structure. Update the implementation to check that flag to determine the size rather than the ACPI 6.4 compliant definition of 'struct acpi_nfit_system_address' from the Linux ACPICA definitions. Update the test infrastructure for the new expectations as well, i.e. continue to emulate the ACPI 6.3 definition of that structure. Without this fix the kernel fails to validate 'SPA' structures and this leads to a crash in nfit_get_smbios_id() since that routine assumes that SPAs are valid if it finds valid SMBIOS tables. BUG: unable to handle page fault for address: ffffffffffffffa8 [..] Call Trace: skx_get_nvdimm_info+0x56/0x130 [skx_edac] skx_get_dimm_config+0x1f5/0x213 [skx_edac] skx_register_mci+0x132/0x1c0 [skx_edac] Cc: Bob Moore <robert.moore@intel.com> Cc: Erik Kaneda <erik.kaneda@intel.com> Fixes: cf16b05c607b ("ACPICA: ACPI 6.4: NFIT: add Location Cookie field") Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/162037273007.1195827.10907249070709169329.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-05-12MAINTAINERS: Move nvdimm mailing listDan Williams
After seeing some users have subscription management trouble, more spam than other Linux development lists, and considering some of the benefits of kernel.org hosted lists, nvdimm and persistent memory development is moving to nvdimm@lists.linux.dev. The old list will remain up until v5.14-rc1 and shutdown thereafter. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Oliver O'Halloran <oohall@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/161898872871.3406469.4054282559340528393.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-05-12tools/testing/nvdimm: Make symbol '__nfit_test_ioremap' staticZou Wei
The sparse tool complains as follows: tools/testing/nvdimm/test/iomap.c:65:14: warning: symbol '__nfit_test_ioremap' was not declared. Should it be static? This symbol is not used outside of iomap.c, so this commit marks it static. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1618904867-25275-1-git-send-email-zou_wei@huawei.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-05-12libnvdimm: Remove duplicate struct declarationWan Jiabing
struct device is declared at 133rd line. The second declaration is unnecessary, remove it. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20210419112725.42145-1-wanjiabing@vivo.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-05-12tpm: fix error return code in tpm2_get_cc_attrs_tbl()Zhen Lei
If the total number of commands queried through TPM2_CAP_COMMANDS is different from that queried through TPM2_CC_GET_CAPABILITY, it indicates an unknown error. In this case, an appropriate error code -EFAULT should be returned. However, we currently do not explicitly assign this error code to 'rc'. As a result, 0 was incorrectly returned. Cc: stable@vger.kernel.org Fixes: 58472f5cd4f6("tpm: validate TPM 2.0 commands") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-05-12tpm, tpm_tis: Reserve locality in tpm_tis_resume()Jarkko Sakkinen
Reserve locality in tpm_tis_resume(), as it could be unsert after waking up from a sleep state. Cc: stable@vger.kernel.org Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reported-by: Hans de Goede <hdegoede@redhat.com> Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-05-12tpm, tpm_tis: Extend locality handling to TPM2 in tpm_tis_gen_interrupt()Jarkko Sakkinen
The earlier fix (linked) only partially fixed the locality handling bug in tpm_tis_gen_interrupt(), i.e. only for TPM 1.x. Extend the locality handling to cover TPM2. Cc: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-integrity/20210220125534.20707-1-jarkko@kernel.org/ Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
2021-05-12trusted-keys: match tpm_get_ops on all return pathsBen Boeckel
The `tpm_get_ops` call at the beginning of the function is not paired with a `tpm_put_ops` on this return path. Cc: stable@vger.kernel.org Fixes: f2219745250f ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Boeckel <mathstuf@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-05-12KEYS: trusted: Fix memory leak on object tdColin Ian King
Two error return paths are neglecting to free allocated object td, causing a memory leak. Fix this by returning via the error return path that securely kfree's td. Fixes clang scan-build warning: security/keys/trusted-keys/trusted_tpm1.c:496:10: warning: Potential memory leak [unix.Malloc] Cc: stable@vger.kernel.org Fixes: 5df16caada3f ("KEYS: trusted: Fix incorrect handling of tpm_get_random()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-05-12objtool/x86: Fix elf_add_alternative() endiannessVasily Gorbik
Currently x86 kernel cross-compiled on big endian system fails at boot with: kernel BUG at arch/x86/kernel/alternative.c:258! Corresponding bug condition look like the following: BUG_ON(feature >= (NCAPINTS + NBUGINTS) * 32); Fix that by converting alternative feature/cpuid to target endianness. Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: https://lore.kernel.org/r/patch-2.thread-6c9df9.git-6c9df9a8098d.your-ad-here.call-01620841104-ext-2554@work.hours
2021-05-12objtool: Fix elf_create_undef_symbol() endiannessVasily Gorbik
Currently x86 cross-compilation fails on big endian system with: x86_64-cross-ld: init/main.o: invalid string offset 488112128 >= 6229 for section `.strtab' Mark new ELF data in elf_create_undef_symbol() as symbol, so that libelf does endianness handling correctly. Fixes: 2f2f7e47f052 ("objtool: Add elf_create_undef_symbol()") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: https://lore.kernel.org/r/patch-1.thread-6c9df9.git-d39264656387.your-ad-here.call-01620841104-ext-2554@work.hours
2021-05-12drm/i915: Use correct downstream caps for check Src-Ctl mode for PCONAnkit Nautiyal
Fix the typo in DPCD caps used for checking SRC CTL mode of HDMI2.1 PCON v2: Corrected Fixes tag (Jani Nikula). v3: Rebased. Fixes: 04b6603d13be ("drm/i915/display: Configure HDMI2.1 Pcon for FRL only if Src-Ctl mode is available") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: "Ville Syrj_l_" <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Swati Sharma <swati2.sharma@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210511120930.12218-1-ankit.k.nautiyal@intel.com (cherry picked from commit 88a9c5485c48ab60c89612a17fc89f4162bbdb9d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-05-12drm/i915/overlay: Fix active retire callback alignmentTvrtko Ursulin
__i915_active_call annotation is required on the retire callback to ensure correct function alignment. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: a21ce8ad12d2 ("drm/i915/overlay: Switch to using i915_active tracking") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210429083530.849546-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit d8e44e4dd221ee283ea60a6fb87bca08807aa0ab) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-05-12drm/i915: Fix crash in auto_retireStéphane Marchesin
The retire logic uses the 2 lower bits of the pointer to the retire function to store flags. However, the auto_retire function is not guaranteed to be aligned to a multiple of 4, which causes crashes as we jump to the wrong address, for example like this: 2021-04-24T18:03:53.804300Z WARNING kernel: [ 516.876901] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI 2021-04-24T18:03:53.804310Z WARNING kernel: [ 516.876906] CPU: 7 PID: 146 Comm: kworker/u16:6 Tainted: G U 5.4.105-13595-g3cd84167b2df #1 2021-04-24T18:03:53.804311Z WARNING kernel: [ 516.876907] Hardware name: Google Volteer2/Volteer2, BIOS Google_Volteer2.13672.76.0 02/22/2021 2021-04-24T18:03:53.804312Z WARNING kernel: [ 516.876911] Workqueue: events_unbound active_work 2021-04-24T18:03:53.804313Z WARNING kernel: [ 516.876914] RIP: 0010:auto_retire+0x1/0x20 2021-04-24T18:03:53.804314Z WARNING kernel: [ 516.876916] Code: e8 01 f2 ff ff eb 02 31 db 48 89 d8 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 f0 ff 87 c8 00 00 00 0f 88 ab 47 4a 00 31 c0 5d c3 0f <1f> 44 00 00 55 48 89 e5 f0 ff 8f c8 00 00 00 0f 88 9a 47 4a 00 74 2021-04-24T18:03:53.804319Z WARNING kernel: [ 516.876918] RSP: 0018:ffff9b4d809fbe38 EFLAGS: 00010286 2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876919] RAX: 0000000000000007 RBX: ffff927915079600 RCX: 0000000000000007 2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876921] RDX: ffff9b4d809fbe40 RSI: 0000000000000286 RDI: ffff927915079600 2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876922] RBP: ffff9b4d809fbe68 R08: 8080808080808080 R09: fefefefefefefeff 2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876924] R10: 0000000000000010 R11: ffffffff92e44bd8 R12: ffff9279150796a0 2021-04-24T18:03:53.804322Z WARNING kernel: [ 516.876925] R13: ffff92791c368180 R14: ffff927915079640 R15: 000000001c867605 2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876926] FS: 0000000000000000(0000) GS:ffff92791ffc0000(0000) knlGS:0000000000000000 2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876928] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 2021-04-24T18:03:53.804324Z WARNING kernel: [ 516.876929] CR2: 0000239514955000 CR3: 00000007f82da001 CR4: 0000000000760ee0 2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876930] PKRU: 55555554 2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876931] Call Trace: 2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876935] __active_retire+0x77/0xcf 2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876939] process_one_work+0x1da/0x394 2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876941] worker_thread+0x216/0x375 2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876944] kthread+0x147/0x156 2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876946] ? pr_cont_work+0x58/0x58 2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876948] ? kthread_blkcg+0x2e/0x2e 2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876950] ret_from_fork+0x1f/0x40 2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876952] Modules linked in: cdc_mbim cdc_ncm cdc_wdm xt_cgroup rfcomm cmac algif_hash algif_skcipher af_alg xt_MASQUERADE uinput snd_soc_rt5682_sdw snd_soc_rt5682 snd_soc_max98373_sdw snd_soc_max98373 snd_soc_rl6231 regmap_sdw snd_soc_sof_sdw snd_soc_hdac_hdmi snd_soc_dmic snd_hda_codec_hdmi snd_sof_pci snd_sof_intel_hda_common intel_ipu6_psys snd_sof_xtensa_dsp soundwire_intel soundwire_generic_allocation soundwire_cadence snd_sof_intel_hda snd_sof snd_soc_hdac_hda snd_soc_acpi_intel_match snd_soc_acpi snd_hda_ext_core soundwire_bus snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core intel_ipu6_isys videobuf2_dma_contig videobuf2_v4l2 videobuf2_common videobuf2_memops mei_hdcp intel_ipu6 ov2740 ov8856 at24 sx9310 dw9768 v4l2_fwnode cros_ec_typec intel_pmc_mux roles acpi_als typec fuse iio_trig_sysfs cros_ec_light_prox cros_ec_lid_angle cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer cros_ec_sensors_ring kfifo_buf industrialio cros_ec_sensorhub 2021-04-24T18:03:53.804337Z WARNING kernel: [ 516.876972] cdc_ether usbnet iwlmvm lzo_rle lzo_compress iwl7000_mac80211 iwlwifi zram cfg80211 r8152 mii btusb btrtl btintel btbcm bluetooth ecdh_generic ecc joydev 2021-04-24T18:03:53.804337Z EMERG kernel: [ 516.879169] gsmi: Log Shutdown Reason 0x03 This change fixes this by aligning the function. Signed-off-by: Stéphane Marchesin <marcheu@chromium.org> Fixes: 229007e02d69 ("drm/i915: Wrap i915_active in a simple kreffed struct") Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210429031021.1218091-1-marcheu@chromium.org (cherry picked from commit ca419f407b43cc89942ebc297c7a63d94abbcae4) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-05-12drm/i915/gt: Fix a double free in gen8_preallocate_top_level_pdpLv Yunlong
Our code analyzer reported a double free bug. In gen8_preallocate_top_level_pdp, pde and pde->pt.base are allocated via alloc_pd(vm) with one reference. If pin_pt_dma() failed, pde->pt.base is freed by i915_gem_object_put() with a reference dropped. Then free_pd calls free_px() defined in intel_ppgtt.c, which calls i915_gem_object_put() to put pde->pt.base again. As pde->pt.base is protected by refcount, so the second put will not free pde->pt.base actually. But, maybe it is better to remove the first put? Fixes: 82adf901138cc ("drm/i915/gt: Shrink i915_page_directory's slab bucket") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210426124340.4238-1-lyl2019@mail.ustc.edu.cn (cherry picked from commit ac69496fe65cca0611d5917b7d232730ff605bc7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-05-12drm/i915: Read C0DRB3/C1DRB3 as 16 bits againVille Syrjälä
We've defined C0DRB3/C1DRB3 as 16 bit registers, so access them as such. Fixes: 1c8242c3a4b2 ("drm/i915: Use unchecked writes for setting up the fences") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-3-ville.syrjala@linux.intel.com (cherry picked from commit f765a5b48c667bdada5e49d5e0f23f8c0687b21b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-05-12drm/i915: Avoid div-by-zero on gen2Ville Syrjälä
Gen2 tiles are 2KiB in size so i915_gem_object_get_tile_row_size() can in fact return <4KiB, which leads to div-by-zero here. Avoid that. Not sure i915_gem_object_get_tile_row_size() is entirely sane anyway since it doesn't account for the different tile layouts on i8xx/i915... I'm not able to hit this before commit 6846895fde05 ("drm/i915: Replace PIN_NONFAULT with calls to PIN_NOEVICT") and it looks like I also need to run recent version of Mesa. With those in place xonotic trips on this quite easily on my 85x. Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-2-ville.syrjala@linux.intel.com (cherry picked from commit ed52c62d386f764194e0184fdb905d5f24194cae) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-05-12nvmet: seset ns->file when open failsDaniel Wagner
Reset the ns->file value to NULL also in the error case in nvmet_file_ns_enable(). The ns->file variable points either to file object or contains the error code after the filp_open() call. This can lead to following problem: When the user first setups an invalid file backend and tries to enable the ns, it will fail. Then the user switches over to a bdev backend and enables successfully the ns. The first received I/O will crash the system because the IO backend is chosen based on the ns->file value: static u16 nvmet_parse_io_cmd(struct nvmet_req *req) { [...] if (req->ns->file) return nvmet_file_parse_io_cmd(req); return nvmet_bdev_parse_io_cmd(req); } Reported-by: Enzo Matsumiya <ematsumiya@suse.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-12ptrace: make ptrace() fail if the tracee changed its pid unexpectedlyOleg Nesterov
Suppose we have 2 threads, the group-leader L and a sub-theread T, both parked in ptrace_stop(). Debugger tries to resume both threads and does ptrace(PTRACE_CONT, T); ptrace(PTRACE_CONT, L); If the sub-thread T execs in between, the 2nd PTRACE_CONT doesn not resume the old leader L, it resumes the post-exec thread T which was actually now stopped in PTHREAD_EVENT_EXEC. In this case the PTHREAD_EVENT_EXEC event is lost, and the tracer can't know that the tracee changed its pid. This patch makes ptrace() fail in this case until debugger does wait() and consumes PTHREAD_EVENT_EXEC which reports old_pid. This affects all ptrace requests except the "asynchronous" PTRACE_INTERRUPT/KILL. The patch doesn't add the new PTRACE_ option to not complicate the API, and I _hope_ this won't cause any noticeable regression: - If debugger uses PTRACE_O_TRACEEXEC and the thread did an exec and the tracer does a ptrace request without having consumed the exec event, it's 100% sure that the thread the ptracer thinks it is targeting does not exist anymore, or isn't the same as the one it thinks it is targeting. - To some degree this patch adds nothing new. In the scenario above ptrace(L) can fail with -ESRCH if it is called after the execing sub-thread wakes the leader up and before it "steals" the leader's pid. Test-case: #include <stdio.h> #include <unistd.h> #include <signal.h> #include <sys/ptrace.h> #include <sys/wait.h> #include <errno.h> #include <pthread.h> #include <assert.h> void *tf(void *arg) { execve("/usr/bin/true", NULL, NULL); assert(0); return NULL; } int main(void) { int leader = fork(); if (!leader) { kill(getpid(), SIGSTOP); pthread_t th; pthread_create(&th, NULL, tf, NULL); for (;;) pause(); return 0; } waitpid(leader, NULL, WSTOPPED); ptrace(PTRACE_SEIZE, leader, 0, PTRACE_O_TRACECLONE | PTRACE_O_TRACEEXEC); waitpid(leader, NULL, 0); ptrace(PTRACE_CONT, leader, 0,0); waitpid(leader, NULL, 0); int status, thread = waitpid(-1, &status, 0); assert(thread > 0 && thread != leader); assert(status == 0x80137f); ptrace(PTRACE_CONT, thread, 0,0); /* * waitid() because waitpid(leader, &status, WNOWAIT) does not * report status. Why ???? * * Why WEXITED? because we have another kernel problem connected * to mt-exec. */ siginfo_t info; assert(waitid(P_PID, leader, &info, WSTOPPED|WEXITED|WNOWAIT) == 0); assert(info.si_pid == leader && info.si_status == 0x0405); /* OK, it sleeps in ptrace(PTRACE_EVENT_EXEC == 0x04) */ assert(ptrace(PTRACE_CONT, leader, 0,0) == -1); assert(errno == ESRCH); assert(leader == waitpid(leader, &status, WNOHANG)); assert(status == 0x04057f); assert(ptrace(PTRACE_CONT, leader, 0,0) == 0); return 0; } Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Simon Marchi <simon.marchi@efficios.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Pedro Alves <palves@redhat.com> Acked-by: Simon Marchi <simon.marchi@efficios.com> Acked-by: Jan Kratochvil <jan.kratochvil@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-12nbd: share nbd_put and return by goto put_nbdSun Ke
Replace the following two statements by the statement “goto put_nbd;” nbd_put(nbd); return 0; Signed-off-by: Sun Ke <sunke32@huawei.com> Suggested-by: Markus Elfring <Markus.Elfring@web.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20210512114331.1233964-3-sunke32@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-12nbd: Fix NULL pointer in flush_workqueueSun Ke
Open /dev/nbdX first, the config_refs will be 1 and the pointers in nbd_device are still null. Disconnect /dev/nbdX, then reference a null recv_workq. The protection by config_refs in nbd_genl_disconnect is useless. [ 656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 656.368943] #PF: supervisor write access in kernel mode [ 656.369844] #PF: error_code(0x0002) - not-present page [ 656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0 [ 656.371693] Oops: 0002 [#1] SMP [ 656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1 [ 656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 656.375904] RIP: 0010:mutex_lock+0x29/0x60 [ 656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d [ 656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246 [ 656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020 [ 656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318 [ 656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40 [ 656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00 [ 656.382166] FS: 00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000 [ 656.382806] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0 [ 656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 656.384927] Call Trace: [ 656.385111] flush_workqueue+0x92/0x6c0 [ 656.385395] nbd_disconnect_and_put+0x81/0xd0 [ 656.385716] nbd_genl_disconnect+0x125/0x2a0 [ 656.386034] genl_family_rcv_msg_doit.isra.0+0x102/0x1b0 [ 656.386422] genl_rcv_msg+0xfc/0x2b0 [ 656.386685] ? nbd_ioctl+0x490/0x490 [ 656.386954] ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0 [ 656.387354] netlink_rcv_skb+0x62/0x180 [ 656.387638] genl_rcv+0x34/0x60 [ 656.387874] netlink_unicast+0x26d/0x590 [ 656.388162] netlink_sendmsg+0x398/0x6c0 [ 656.388451] ? netlink_rcv_skb+0x180/0x180 [ 656.388750] ____sys_sendmsg+0x1da/0x320 [ 656.389038] ? ____sys_recvmsg+0x130/0x220 [ 656.389334] ___sys_sendmsg+0x8e/0xf0 [ 656.389605] ? ___sys_recvmsg+0xa2/0xf0 [ 656.389889] ? handle_mm_fault+0x1671/0x21d0 [ 656.390201] __sys_sendmsg+0x6d/0xe0 [ 656.390464] __x64_sys_sendmsg+0x23/0x30 [ 656.390751] do_syscall_64+0x45/0x70 [ 656.391017] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put(). Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Signed-off-by: Sun Ke <sunke32@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20210512114331.1233964-2-sunke32@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-12f2fs: return EINVAL for hole cases in swap fileJaegeuk Kim
This tries to fix xfstests/generic/495. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-05-12ACPI: PM: Add ACPI ID of Alder Lake FanSumeet Pawnikar
Add a new unique fan ACPI device ID for Alder Lake to support it in acpi_dev_pm_attach() function. Fixes: 38748bcb940e ("ACPI: DPTF: Support Alder Lake") Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-05-12blkdev.h: remove unused codes blk_account_rqLin Feng
Last users of blk_account_rq gone with patch commit a1ce35fa49852db ("block: remove dead elevator code") and now it gets no caller, it can be safely removed. Signed-off-by: Lin Feng <linf@wangsu.com> Link: https://lore.kernel.org/r/20210512100124.173769-1-linf@wangsu.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-12block, bfq: avoid circular stable mergesPaolo Valente
BFQ may merge a new bfq_queue, stably, with the last bfq_queue created. In particular, BFQ first waits a little bit for some I/O to flow inside the new queue, say Q2, if this is needed to understand whether it is better or worse to merge Q2 with the last queue created, say Q1. This delayed stable merge is performed by assigning bic->stable_merge_bfqq = Q1, for the bic associated with Q1. Yet, while waiting for some I/O to flow in Q2, a non-stable queue merge of Q2 with Q1 may happen, causing the bic previously associated with Q2 to be associated with exactly Q1 (bic->bfqq = Q1). After that, Q2 and Q1 may happen to be split, and, in the split, Q1 may happen to be recycled as a non-shared bfq_queue. In that case, Q1 may then happen to undergo a stable merge with the bfq_queue pointed by bic->stable_merge_bfqq. Yet bic->stable_merge_bfqq still points to Q1. So Q1 would be merged with itself. This commit fixes this error by intercepting this situation, and canceling the schedule of the stable merge. Fixes: 430a67f9d616 ("block, bfq: merge bursts of newly-created queues") Signed-off-by: Pietro Pedroni <pedroni.pietro.96@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20210512094352.85545-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-12sched/fair: Fix clearing of has_idle_cores flag in select_idle_cpu()Gautham R. Shenoy
In commit: 9fe1f127b913 ("sched/fair: Merge select_idle_core/cpu()") in select_idle_cpu(), we check if an idle core is present in the LLC of the target CPU via the flag "has_idle_cores". We look for the idle core in select_idle_cores(). If select_idle_cores() isn't able to find an idle core/CPU, we need to unset the has_idle_cores flag in the LLC of the target to prevent other CPUs from going down this route. However, the current code is unsetting it in the LLC of the current CPU instead of the target CPU. This patch fixes this issue. Fixes: 9fe1f127b913 ("sched/fair: Merge select_idle_core/cpu()") Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/1620746169-13996-1-git-send-email-ego@linux.vnet.ibm.com
2021-05-11f2fs: avoid swapon failure by giving a warning firstJaegeuk Kim
The final solution can be migrating blocks to form a section-aligned file internally. Meanwhile, let's ask users to do that when preparing the swap file initially like: 1) create() 2) ioctl(F2FS_IOC_SET_PIN_FILE) 3) fallocate() Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: 36e4d95891ed ("f2fs: check if swapfile is section-alligned") Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-05-11blk-iocost: fix weight updates of inner active iocgsTejun Heo
When the weight of an active iocg is updated, weight_updated() is called which in turn calls __propagate_weights() to update the active and inuse weights so that the effective hierarchical weights are update accordingly. The current implementation is incorrect for inner active nodes. For an active leaf iocg, inuse can be any value between 1 and active and the difference represents how much the iocg is donating. When weight is updated, as long as inuse is clamped between 1 and the new weight, we're alright and this is what __propagate_weights() currently implements. However, that's not how an active inner node's inuse is set. An inner node's inuse is solely determined by the ratio between the sums of inuse's and active's of its children - ie. they're results of propagating the leaves' active and inuse weights upwards. __propagate_weights() incorrectly applies the same clamping as for a leaf when an active inner node's weight is updated. Consider a hierarchy which looks like the following with saturating workloads in AA and BB. R / \ A B | | AA BB 1. For both A and B, active=100, inuse=100, hwa=0.5, hwi=0.5. 2. echo 200 > A/io.weight 3. __propagate_weights() update A's active to 200 and leave inuse at 100 as it's already between 1 and the new active, making A:active=200, A:inuse=100. As R's active_sum is updated along with A's active, A:hwa=2/3, B:hwa=1/3. However, because the inuses didn't change, the hwi's remain unchanged at 0.5. 4. The weight of A is now twice that of B but AA and BB still have the same hwi of 0.5 and thus are doing the same amount of IOs. Fix it by making __propgate_weights() always calculate the inuse of an active inner iocg based on the ratio of child_inuse_sum to child_active_sum. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Dan Schatzberg <dschatzberg@fb.com> Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Cc: stable@vger.kernel.org # v5.4+ Link: https://lore.kernel.org/r/YJsxnLZV1MnBcqjj@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-12KVM: PPC: Book3S HV: Fix kvm_unmap_gfn_range_hv() for Hash MMUMichael Ellerman
Commit 32b48bf8514c ("KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks") fixed kvm_unmap_gfn_range_hv() by adding a for loop over each gfn in the range. But for the Hash MMU it repeatedly calls kvm_unmap_rmapp() with the first gfn of the range, rather than iterating through the range. This exhibits as strange guest behaviour, sometimes crashing in firmare, or booting and then guest userspace crashing unexpectedly. Fix it by passing the iterator, gfn, to kvm_unmap_rmapp(). Fixes: 32b48bf8514c ("KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210511105459.800788-1-mpe@ellerman.id.au
2021-05-12powerpc/legacy_serial: Fix UBSAN: array-index-out-of-boundsChristophe Leroy
UBSAN complains when a pointer is calculated with invalid 'legacy_serial_console' index, allthough the index is verified before dereferencing the pointer. Fix it by checking 'legacy_serial_console' validity before calculating pointers. Fixes: 0bd3f9e953bd ("powerpc/legacy_serial: Use early_ioremap()") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210511010712.750096-1-mpe@ellerman.id.au
2021-05-12powerpc/signal: Fix possible build failure with unsafe_copy_fpr_{to/from}_userChristophe Leroy
When neither CONFIG_VSX nor CONFIG_PPC_FPU_REGS are selected, unsafe_copy_fpr_to_user() and unsafe_copy_fpr_from_user() are doing nothing. Then, unless the 'label' operand is used elsewhere, GCC complains about it being defined but not used. To fix that, add an impossible 'goto label'. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/cadc0a328bc8e6c5bf133193e7547d5c10ae7895.1620465920.git.christophe.leroy@csgroup.eu
2021-05-12powerpc/uaccess: Fix __get_user() with CONFIG_CC_HAS_ASM_GOTO_OUTPUTChristophe Leroy
Building kernel mainline with GCC 11 leads to following failure when starting 'init': init[1]: bad frame in sys_sigreturn: 7ff5a900 nip 001083cc lr 001083c4 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This is an issue due to a segfault happening in __unsafe_restore_general_regs() in a loop copying registers from user to kernel: 10: 7d 09 03 a6 mtctr r8 14: 80 ca 00 00 lwz r6,0(r10) 18: 80 ea 00 04 lwz r7,4(r10) 1c: 90 c9 00 08 stw r6,8(r9) 20: 90 e9 00 0c stw r7,12(r9) 24: 39 0a 00 08 addi r8,r10,8 28: 39 29 00 08 addi r9,r9,8 2c: 81 4a 00 08 lwz r10,8(r10) <== r10 is clobbered here 30: 81 6a 00 0c lwz r11,12(r10) 34: 91 49 00 08 stw r10,8(r9) 38: 91 69 00 0c stw r11,12(r9) 3c: 39 48 00 08 addi r10,r8,8 40: 39 29 00 08 addi r9,r9,8 44: 42 00 ff d0 bdnz 14 <__unsafe_restore_general_regs+0x14> As shown above, this is due to r10 being re-used by GCC. This didn't happen with CLANG. This is fixed by tagging 'x' output as an earlyclobber operand in __get_user_asm2_goto(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/cf0a050d124d4f426cdc7a74009d17b01d8d8969.1620465917.git.christophe.leroy@csgroup.eu
2021-05-12powerpc/pseries: warn if recursing into the hcall tracing codeNicholas Piggin
The hcall tracing code has a recursion check built in, which skips tracing if we are already tracing an hcall. However if the tracing code has problems with recursion, this check may not catch all cases because the tracing code could be invoked from a different tracepoint first, then make an hcall that gets traced, then recurse. Add an explicit warning if recursion is detected here, which might help to notice tracing code making hcalls. Really the core trace code should have its own recursion checking and warnings though. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210508101455.1578318-5-npiggin@gmail.com
2021-05-12powerpc/pseries: use notrace hcall variant for H_CEDE idleNicholas Piggin
Rather than special-case H_CEDE in the hcall trace wrappers, make the idle H_CEDE call use plpar_hcall_norets_notrace(). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210508101455.1578318-4-npiggin@gmail.com
2021-05-12powerpc/pseries: Don't trace hcall tracing wrapperNicholas Piggin
This doesn't seem very useful to trace before the recursion check, even if the ftrace code has any recursion checks of its own. Be on the safe side and don't trace the hcall trace wrappers. Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210508101455.1578318-3-npiggin@gmail.com
2021-05-12powerpc/pseries: Fix hcall tracing recursion in pv queued spinlocksNicholas Piggin
The paravit queued spinlock slow path adds itself to the queue then calls pv_wait to wait for the lock to become free. This is implemented by calling H_CONFER to donate cycles. When hcall tracing is enabled, this H_CONFER call can lead to a spin lock being taken in the tracing code, which will result in the lock to be taken again, which will also go to the slow path because it queues behind itself and so won't ever make progress. An example trace of a deadlock: __pv_queued_spin_lock_slowpath trace_clock_global ring_buffer_lock_reserve trace_event_buffer_lock_reserve trace_event_buffer_reserve trace_event_raw_event_hcall_exit __trace_hcall_exit plpar_hcall_norets_trace __pv_queued_spin_lock_slowpath trace_clock_global ring_buffer_lock_reserve trace_event_buffer_lock_reserve trace_event_buffer_reserve trace_event_raw_event_rcu_dyntick rcu_irq_exit irq_exit __do_irq call_do_irq do_IRQ hardware_interrupt_common_virt Fix this by introducing plpar_hcall_norets_notrace(), and using that to make SPLPAR virtual processor dispatching hcalls by the paravirt spinlock code. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210508101455.1578318-2-npiggin@gmail.com
2021-05-12powerpc/syscall: Calling kuap_save_and_lock() is wrongChristophe Leroy
kuap_save_and_lock() is only for interrupts inside kernel. system call are only from user, calling kuap_save_and_lock() is wrong. Fixes: c16728835eec ("powerpc/32: Manage KUAP in C") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/332773775cf24a422105dee2d383fb8f04589045.1620302182.git.christophe.leroy@csgroup.eu
2021-05-12powerpc/interrupts: Fix kuep_unlock() callChristophe Leroy
Same as kuap_user_restore(), kuep_unlock() has to be called when really returning to user, that is in interrupt_exit_user_prepare(), not in interrupt_exit_prepare(). Fixes: b5efec00b671 ("powerpc/32s: Move KUEP locking/unlocking in C") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b831e54a2579db24fbef836ed415588ce2b3e825.1620312573.git.christophe.leroy@csgroup.eu
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 10:32:42 +0000