summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-09NFC: Check for llcp_sock and its device from llcp_sock_getnameSamuel Ortiz
They both can potentially be NULL. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Add ISO 14443 type B protocolSamuel Ortiz
Some devices (e.g. Sony's PaSoRi) can not do type B polling, so we have to make a distinction between ISO14443 type A and B poll modes. Cc: Eric Lapuyade <eric.lapuyade@intel.com> Cc: Ilan Elias <ilane@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Use communicate thru only for PaSoRi when trying to read Felica tagsSamuel Ortiz
Otherwise DATA_EXCHANGE seems to be just fine. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Add initial Sony RC-S360 support to pn533Samuel Ortiz
Sony RC-S360 is also known as the Sony PaSoRi contactless reader. Only type 2, 3 and 4 tag reading is supported at the moment. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Dereference LLCP bind socket address after checking for it to be NULLSamuel Ortiz
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Do not return EBUSY when stopping a poll that's already stoppedSamuel Ortiz
We check for the polling flag before checking if the netlink PID caller match. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Remove warning from nfc_llcp_local_putSamuel Ortiz
The socket local pointer can be NULL when a socket is created but never bound or connected. Reported-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Handle LLCP Disconnected Mode framesSamuel Ortiz
When receiving such frame, the sockets waiting for a connection to finish should be woken up. Connecting to an unbound LLCP service will trigger a DM as a response. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: LLCP late bindingSamuel Ortiz
With the LLCP 16 local SAPs we can potentially quickly run out of source SAPs for non well known services. With the so called late binding we will reserve an SAP only when we actually get a client connection for a local service. The SAP will be released once the last client is gone, leaving it available to other services. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Forbid SSAP binding to a not well known LLCP serviceSamuel Ortiz
With not Well Known Services there is no guarantees as to which SSAP the server will be listening on, so there is no reason to support binding to a specific source SAP. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Forbid LLCP service name reusingSamuel Ortiz
This patch fixes a typo and return the correct error when trying to bind 2 sockets to the same service name. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Release LLCP SAP when the owner is releasedSamuel Ortiz
The LLCP SAP should only be freed when the socket owning it is released. As long as the socket is alive, the SAP should be reserved in order to e.g. send the right wks array when bringing the MAC up. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Close listening LLCP sockets when the device is goneSamuel Ortiz
When the MAC link goes down, we should only keep the bound sockets alive. They will be closed by sock_release or when the underlying NFC device is moving away. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Build LLCP general bytes upon requestSamuel Ortiz
Drivers will need them before starting a poll or when being activated as targets. Mostly WKS can have changed between device registration and then so we need to re-build the whole array. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Fix LLCP getname socket opSamuel Ortiz
Set the right target index and use a better socket declaration routine. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Update LLCP socket target index when getting a connectionSamuel Ortiz
Getting a valid CONNECT means we have a valid target index. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Add netlink module alias for NFCSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Add modules alias for NFC socketsSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Allow HCI driver to pre-open pipes to some gatesEric Lapuyade
Some NFC chips will statically create and open pipes for both standard and proprietary gates. The driver can now pass this information to HCI such that HCI will not attempt to create and open them, but will instead directly use the passed pipe ids. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: update PN544 HCI driver state when opened/closedEric Lapuyade
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Error management documentationEric Lapuyade
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: nfc_driver_failure() implementationEric Lapuyade
If the device is polling we sent a 0 target found event. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: nfc_targets_found() should accept zero target foundEric Lapuyade
The semantics for a zero target found event is that the polling operation could not complete. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Core must test the device polling state inside the device lockEric Lapuyade
There can ever be only one call to nfc_targets_found() after polling has been engaged. This could be from a target discovered event from the driver, or from an error handler to notify poll will never complete. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Implement HCI driver or internal error managementEric Lapuyade
If there is an ongoing HCI command executing, it will be completed, thereby pushing the error up to the core. Otherwise, HCI will directly notify the core with the error. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Factorize HCI cmd completionEric Lapuyade
HCI cmd can be completed either from an HCI response or from an internal driver or HCI error. This requires to factorize the completion code outside of the device lock. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Driver failure APIEric Lapuyade
This API should be used by drivers, HCI, SHDLC or NCI stacks to report an unrecoverable error. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Changed HCI cmd execution completion result to std linux errnoEric Lapuyade
An HCI command can complete either from an HCI response (with an HCI result) or as a consequence of any other system error during processing. The completion therefore needs to take a standard errno code. The HCI response will convert its result to a standard errno before calling the completion. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Implement HCP reaggregation allocation error caseEric Lapuyade
We can now report an ENOMEM error up to the HCI layer. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Remove an impossible HCI error caseEric Lapuyade
nfc_hci_recv_frame can not be called with a NULL skb. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Handle SHDLC RSET frames from an SHDLC connected chipEric Lapuyade
shdlc reset may leave HCI in an inconsistent state by loosing parts of HCI frames. Handle this case by reporting an unrecoverable error to HCI. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Removed addressed shdlc TODOsEric Lapuyade
The questions asked in the comments have been answered and addressed. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Prepare asynchronous error management for driver and shdlcEric Lapuyade
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09ath9k: Stop the BTCOEX timers before disabling BTCOEXMohammed Shafi Shajakhan
Its safe to stop the BTCOEX timers 'period_timer' and 'no_stomp_timer' before disabling BTCOEX. These timers can call ath9k_hw_btcoex_enable (or) change the BT stomp type if they seem to be running after we had called ath9k_hw_btcoex_disable, which is obviously not correct. Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: Fix MCI cleanupMohammed Shafi Shajakhan
We are doing MCI cleanup eventhough BTCOEX is not enabled via module parameter. This means we do ath_mci_cleanup though we skipped calling ath_mci_setup. Yet it does not causes any issues now as we free the DMA buffer allocated only when it is allocated during ath_mci_setup. Reviewed-by: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09bcma: use custom printing functionsRafał Miłecki
Having bus number printed makes it much easier to anaylze logs on systems with more buses. For example Netgear WNDR4500 has 3 AMBA buses in total, which makes standard log really messy. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09b43: N-PHY: fix RSSI calibrationRafał Miłecki
Specs were updated, change code to match it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09brcmsmac: fix brcms_c_regd_init() which crashed after 11ad patchArend van Spriel
This patch fixes an OOPS in brcmsmac driver, which was introduced by the 11ad patch 'cfg80211: add 802.11ad (60gHz band) support'. The value IEEE80211_NUM_BANDS increased, which was used in the brcms_c_regd_init() function. Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Cc: Johannes Berg <johannes.berg@intel.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: enable support for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: set 4ADDRESS bit in RX filter for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: enable PLL workaround for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: fix PLL initialization for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: skip internal regulator configuration for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: disable SYNC_HOST1_FATAL interrupts for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: fix RF channel frequency configuration for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: fix PAPRD settings for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: fix antenna control configuration for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: fix XPABIASLEVEL settings for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: read spur frequency information from eeprom for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: add mode register initialization code for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-28 05:27:35 +0000