summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-16i40evf: enable bus master after resetMitch Williams
If the VF is reset via VFLR, the device will be knocked out of bus master mode, and the driver will fail to recover from the reset. Fix this by enabling bus mastering after every reset. In a non-VFLR case, the bus master bit will not be disabled, and this call will have no effect. Change-ID: Id515859ac7a691db478222228add6d149e96801a Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: add a little more to an NVM update debug messageShannon Nelson
Add a little more detail to an NVM update debug message in order to see the full ethtool request data. Change-ID: Iab10437cb32d6fddc67ee347e7c0b42511e152cd Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: refactor DCB functionJesse Brandeburg
This is a simple refactor suggested by the community to change a multi-level if statement into a switch. Change-ID: I831cf3c40426022220aa9b43990022d22dfd50db Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: add 20G speed for Tx bandwidth calculationsMitch Williams
When calculating TX bandwidth for VFs, we need to know the link speed to make sure we don't allocate more bandwidth than is available. Add 20G link speed to the switch statement so we can support devices that link at that speed. Change-ID: I5409f6139d549e5832777db9c22ca0664e0c5f8b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: add counter for arq overflowsMitch Williams
Sometimes, ARQ overflows are a big deal and tell us that the firmware/hardware/driver/something is having problems. But normally they're no big deal. To assist in assessing this, add a counter to our Ethtool stats. A handful of ARQ overflows during VF init is no problem. A large, ever-growing number indicates that Something Bad is happening. Change-ID: Ie5348bfbc8a54a890559cb00279c28d976a55096 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: fix write-back-on-itr to work with legacy itrAnjali Singhai Jain
We were not doing write-back on interrupt throttle for Legacy case in X722. This patch fixes that, so we do WB_ON_ITR for Legacy as well. Plus the issue that we should still be setting NO_ITR if we are touching the DYN_CTLN register since we do not want to change ITR setting here. Change-ID: I5db8491ee1544118a389db839cecc93e1bbc480e Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: Store lan_vsi_idx and lan_vsi_id in the right sizePandi Maharajan
lan_vsi_idx and lan_vsi_id are assigned to u16 data sized variables but declared in u8. This patch fixes the width of the datatype. Change-ID: If4bcbcc7d32f2b287c51cb33d17879691258dce2 Signed-off-by: Pandi Kumar Maharajan <pandi.maharajan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: Bump AQ minor version to 1.5 for new FW featuresShannon Nelson
Bump AQ minor version to 1.5 for new FW features. Change-ID: I5a790f7f519a2a8921aaa1c5663727dd1897ffec Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: AQ thermal sensor control structShannon Nelson
Add the new AQ command and struct for managing a thermal sensor. Change-ID: I6f5631839a0f3dca352a6c222f1269a960e2310a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16Merge branch 'ip-sysctl-namespaceify'David S. Miller
Nikolay Borisov says: ==================== Namespacify various ip sysctl knobs This series continues namespacifying more net related knobs. The focus here is on ip options. Patches 1,3,4,5 namespacify the respective sysctl knobs. Patch 2 moves some igmp code to the correct file (and function) and also adds some #ifdef guards to silence compilation warnings. Finally, patch 5 exposes the ip fragmentation related sysctls since all of the knobs are namespaced. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: Export ip fragment sysctl to unprivileged usersNikolay Borisov
Now that all the ip fragmentation related sysctls are namespaceified there is no reason to hide them anymore from "root" users inside containers. Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16ipv4: namespacify ip fragment max dist sysctl knobNikolay Borisov
Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16ipv4: namespacify ip_early_demux sysctl knobNikolay Borisov
Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16ipv4: Namespacify ip_dynaddr sysctl knobNikolay Borisov
Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16igmp: net: Move igmp namespace init to correct fileNikolay Borisov
When igmp related sysctl were namespacified their initializatin was erroneously put into the tcp socket namespace constructor. This patch moves the relevant code into the igmp namespace constructor to keep things consistent. Also sprinkle some #ifdefs to silence warnings Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16ipv4: Namespaceify ip_default_ttl sysctl knobNikolay Borisov
Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16Merge tag 'wireless-drivers-next-for-davem-2016-02-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: wl12xx * add device tree support for SPI mwifiex * add debugfs file to read chip information * add MSIx support for newer pcie chipsets (8997 onwards) * add schedule scan support * add WoWLAN net-detect support * firmware dump support for w8997 chipset iwlwifi * continue the work on multiple Rx queues * add support for beacon storing used in low power states * use the regular firmware image of WoWLAN * fix 8000 devices for Big Endian machines * more firmware debug hooks * add support for P2P Client snoozing * make the beacon filtering for AP mode configurable * fix transmit queues overflow with LSO libertas * add support for setting power save via cfg80211 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: phy: spi_ks8995: include linux/gpio/consumer.hArnd Bergmann
The ks8995 phy driver just started using gpiod_* functions, which are declared in linux/gpio/consumer.h, not linux/gpio.h, resulting in a build failure in randconfig builds that do not have CONFIG_GPIOLIB enabled: drivers/net/phy/spi_ks8995.c: In function 'ks8995_probe': drivers/net/phy/spi_ks8995.c:477:3: error: implicit declaration of function 'gpiod_set_value' [-Werror=implicit-function-declaration] This changes the header inclusion so it builds in all configurations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cd6f288cbaab ("net: phy: spi_ks8995: add support for resetting switch using GPIO") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16i40e: AQ Add VXLAN-GPE tunnel typeShannon Nelson
Add the new Cisco VXLAN-GPE cloud tunnel type for the Add Cloud Filter and UDP tunnel AQ commands. Change-ID: I2c093c7d79726c7fca08a36e5c63581a905da3d2 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16tcp: add tcpi_min_rtt and tcpi_notsent_bytes to tcp_infoEric Dumazet
tcpi_min_rtt reports the minimal rtt observed by TCP stack for the flow, in usec unit. Might be ~0U if not yet known. tcpi_notsent_bytes reports the amount of bytes in the write queue that were not yet sent. This is done in a single patch to not add a temporary 32bit padding hole in tcp_info. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16Merge branch 'unified-tunnel-dst-caching'David S. Miller
Paolo Abeni says: ==================== net: unify dst caching for tunnel devices This patch series try to unify the dst cache implementations currently present in the kernel, namely in ip_tunnel.c and ip6_tunnel.c, introducing a new generic implementation, replacing the existing ones, and then using the new implementation in other tunnel devices which currently lack it. The new dst implementation is compiled, as built-in, only if any device using it is enabled. Caching the dst for the tunnel remote address gives small, but measurable, performance improvement when tunneling over ipv4 (in the 2%-4% range) and significant ones when tunneling over ipv6 (roughly 60% when no fragmentation/segmentation take place and the tunnel local address is not specified). v2: - move the vxlan dst_cache usage inside the device lookup functions - fix usage after free for lwt tunnel moving the dst cache storage inside the dst_metadata, - sparse codying style cleanup ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net/ipv4: add dst cache support for gre lwtunnelsPaolo Abeni
In case of UDP traffic with datagram length below MTU this gives about 4% performance increase Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16geneve: add dst caching supportPaolo Abeni
use generic dst implementation for both plain geneve devices and lwtunnels. In case of UDP traffic with datagram length below MTU this give about 2% performance increase for plain geneve tunnel over ipv4, about 65% performance increase for ipv6 tunnel. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: add dst_cache to ovs vxlan lwtunnelPaolo Abeni
In case of UDP traffic with datagram length below MTU this give about 2% performance increase when tunneling over ipv4 and about 60% when tunneling over ipv6 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: use dst_cache for vxlan devicePaolo Abeni
In case of UDP traffic with datagram length below MTU this give about 3% performance increase when tunneling over ipv4 and about 70% when tunneling over ipv6. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16ip_tunnel: replace dst_cache with generic implementationPaolo Abeni
The current ip_tunnel cache implementation is prone to a race that will cause the wrong dst to be cached on cuncurrent dst cache miss and ip tunnel update via netlink. Replacing with the generic implementation fix the issue. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: replace dst_cache ip6_tunnel implementation with the generic onePaolo Abeni
This also fix a potential race into the existing tunnel code, which could lead to the wrong dst to be permanenty cached: CPU1: CPU2: <xmit on ip6_tunnel> <cache lookup fails> dst = ip6_route_output(...) <tunnel params are changed via nl> dst_cache_reset() // no effect, // the cache is empty dst_cache_set() // the wrong dst // is permanenty stored // into the cache With the new dst implementation the above race is not possible since the first cache lookup after dst_cache_reset will fail due to the timestamp check Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: add dst_cache supportPaolo Abeni
This patch add a generic, lockless dst cache implementation. The need for lock is avoided updating the dst cache fields only in per cpu scope, and requiring that the cache manipulation functions are invoked with the local bh disabled. The refresh_ts and reset_ts fields are used to ensure the cache consistency in case of cuncurrent cache update (dst_cache_set*) and reset operation (dst_cache_reset). Consider the following scenario: CPU1: CPU2: <cache lookup with emtpy cache: it fails> <get dst via uncached route lookup> <related configuration changes> dst_cache_reset() dst_cache_set() The dst entry set passed to dst_cache_set() should not be used for later dst cache lookup, because it's obtained using old configuration values. Since the refresh_ts is updated only on dst_cache lookup, the cached value in the above scenario will be discarded on the next lookup. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16Merge branch 'bnx2x-next'David S. Miller
Yuval Mintz says: ==================== bnx2x: driver updates This series contains several changes - the biggest change is the addition of Geneve NDO support [allows device to perform RSS according to inner-headers of encapsulated packet, similar to what it does for vxlan]. It also extends dcbx support, as well as introducing some minor changes. Dave, Please consider applying this series to `net-next'. [Do notice patch #3 fails checkpatch due to consistency with existing HSI] ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16bnx2x: Warn about grc timeouts in register dumpYuval Mintz
There are several scenarios where taking a register dump from a device might log benign GRC timeout attentions to system logs. Most common of those is when taking the dump from a 2-port device. Sadly, there's no easy way to mask the problematic attentions during the flow - Changing this behvaior would require a firmware update. For now, simply warn users to ignore the warnings. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16bnx2x: extend DCBx supportYuval Mintz
This adds support for default application priority. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16bnx2x: Add support for single-port DCBxYuval Mintz
Driver is currently looking at shared information for determining whether DCBx can be supported for a given port. On 4-port devices, up-to-date management firmware can support DCBx on each port of a given engine independently - but that would cause bnx2x to misinterpert the support and assume DCBx is supported on both. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16bnx2x: Add Geneve inner-RSS supportYuval Mintz
This adds the ability to perform RSS hashing based on encapsulated headers for a geneve-encapsulated packet. This also changes the Vxlan implementation in bnx2x to be uniform for both vxlan and geneve [from configuration perspective]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16bnx2x: Remove unneccessary EXPORT_SYMBOLYuval Mintz
bnx2x_schedule_sp_rtnl is exported by bnx2x, although no other module uses it. Reported-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16i40e: AQ Add set_switch_configShannon Nelson
Add the new Set Switch Config AdminQ command, and mark the L2 Filter bit as deprecated in the Add VEB command. Change-ID: I5b24790f14c56f0ddf3f70df1e486844146b039f Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: AQ Shared resource flagsShannon Nelson
Add flags to MAC allocation requests to signify that the MAC VLAN filters should come from the shared resource pool rather than the dedicated PF resource pools. Change-ID: I4c2da64c01856edcb0982bc4aab75c5a91047a7a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16tipc: refactor node xmit and fix memory leaksRichard Alpe
Refactor tipc_node_xmit() to fail fast and fail early. Fix several potential memory leaks in unexpected error paths. Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16dmascc: Return correct error codesAmitoj Kaur Chawla
This change has been made with the goal that kernel functions should return something more descriptive than -1 on failure. A variable `err` has been introduced for storing error codes. The return value of kzalloc on failure should return a -1 and not a -ENOMEM. This was found using Coccinelle. A simplified version of the semantic patch used is: //<smpl> @@ expression *e; identifier l1; @@ e = kzalloc(...); if (e == NULL) { ... goto l1; } l1: ... return -1 + -ENOMEM ; //</smpl Furthermore, set `err` to -ENOMEM on failure of alloc_netdev(), and to -ENODEV on failure of register_netdev() and probe_irq_off(). The single call site only checks that the return value is not 0, hence no change is required at the call site. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2016-02-15 This series contains updates to igb only. Shota Suzuki cleans up unnecessary flag setting for 82576 in igb_set_flag_queue_pairs() since the default block already sets IGB_FLAG_QUEUE_PAIRS to the correct value anyways, so the e1000_82576 code block is not necessary and we can simply fall through. Then fixes an issue where IGB_FLAG_QUEUE_PAIRS can now be set by using "ethtool -L" option but is never cleared unless the driver is reloaded, so clear the queue pairing if the pairing becomes unnecessary as a result of "ethtool -L". Mitch fixes the igbvf from giving up if it fails to get the hardware mailbox lock. This can happen when the PF-VF communication channel is heavily loaded and causes complete communications failure between the PF and VF drivers, so add a counter and a delay so that the driver will now retry ten times before giving up on getting the mailbox lock. The remaining patches in the series are from Alex Duyck, starting with the cleaning up code that sets the MAC address. Then refactors the VFTA and VLVF configuration, to simplify and update to similar setups in the ixgbe driver. Fixed an issue were VLANs headers size was being added to the value programmed into the RLPML registers, yet these registers already take into account the size of the VLAN headers when determining the maximum packet length, so we can drop the code that adds the size to the RLPML registers. Cleaned up the configuration of the VF port based VLAN configuration. Also fixed the igb driver so that we can fully support SR-IOV or the recently added NTUPLE filtering while allowing support for VLAN promiscuous mode. Also added the ability to use the bridge utility to add a FDB entry for the PF to an igb port. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16Merge branch 'ethtool-channels-rxfh-conflict'David S. Miller
Jacob Keller says: ==================== ethtool: correct {GS}CHANNELS and {GS}RXFH conflict This patch series fixes up ethtool_set_channels operation which allowed modifying the RXFH table indirectly by reducing the number of queues below the current max queue used by the Rx flow table. Most drivers incorrectly allowed this to destroy the Rx flow table and would then start by reinitializing it to default settings. However, drivers are not able to correctly handle the conflict since there was no way to differentiate between the default settings and the user requested explicit settings. To fix this, implement a new netdev private flag which we use to indicate whether the RXFH has been user configured. If someone has a better alternative of how to store this information, let me know. I am not sure that priv_flags is the best solution but I have not had any better idea. Secondly, we add a function which just calls the driver's get_rxfh callback to determine the current indirection table. Loop through this and we can determine the current highest queue that will be used by RSS. Now, modify ethtool_set_channels to add a check ensuring that if (a) we have had rxfh configured by user, (b) we can get the maximum RSS queue currently used, then we ensure that the newly requested Rx count (or combined count) is at least as high as this maximum RSS queue. The reasoning here is that we can always safely increase the number of queues. If we decrease the queues we must ensure that the decrease does not go lower than the highest in-use queue for the Rx flow table. Drivers may still need to be patched if they currently overwrite the Rx flow table during channel configuration. If the driver currently always resets Rx flow table when increasing number of queues it must be patched to only do this when netif_is_rxfh_configured returns false. The second patch simply adds a check to ensure that all provided channel counts fit within driver defined maximums. The third patch fixes fm10k to correctly reconfigure the RSS reta table whenever it is still unconfigured. This means that the default state will provide RSS to every queue. Once the user has configured RXFH, then we should maintain it. In addition, since the case where we must reconfigure the RSS table in this case should now no longer occur, add a dev_err message to indicate the user that we did so. I have also supplied an ethtool patch to enable setting the default Rx flow indirection table. Without this, current ethtool does not support sending an indir_size of 0, and thus does not correctly support configuring back to the default. Changes in v2: * fixed compile error * fixed incorrect comparison with max_rx_in_use * adjusted looping over dev_size * removed inline on function * dropped patch about separating combined vs asymmetric channels * verified behavior using fm10k driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16fm10k: don't reinitialize RSS flow table when RXFH configuredKeller, Jacob E
Also print an error message incase we do have to reconfigure as this should no longer happen anymore due to ethtool changes. If it somehow does occur, user should be made aware of it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16ethtool: ensure channel counts are within bounds during SCHANNELSKeller, Jacob E
Add a sanity check to ensure that all requested channel sizes are within bounds, which should reduce errors in driver implementation. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16ethtool: correctly ensure {GS}CHANNELS doesn't conflict with GS{RXFH}Keller, Jacob E
Ethernet drivers implementing both {GS}RXFH and {GS}CHANNELS ethtool ops incorrectly allow SCHANNELS when it would conflict with the settings from SRXFH. This occurs because it is not possible for drivers to understand whether their Rx flow indirection table has been configured or is in the default state. In addition, drivers currently behave in various ways when increasing the number of Rx channels. Some drivers will always destroy the Rx flow indirection table when this occurs, whether it has been set by the user or not. Other drivers will attempt to preserve the table even if the user has never modified it from the default driver settings. Neither of these situation is desirable because it leads to unexpected behavior or loss of user configuration. The correct behavior is to simply return -EINVAL when SCHANNELS would conflict with the current Rx flow table settings. However, it should only do so if the current settings were modified by the user. If we required that the new settings never conflict with the current (default) Rx flow settings, we would force users to first reduce their Rx flow settings and then reduce the number of Rx channels. This patch proposes a solution implemented in net/core/ethtool.c which ensures that all drivers behave correctly. It checks whether the RXFH table has been configured to non-default settings, and stores this information in a private netdev flag. When the number of channels is requested to change, it first ensures that the current Rx flow table is not going to assign flows to now disabled channels. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: fec: Add "phy-reset-active-low" property to DTBernhard Walle
We need that for a custom hardware that needs the reverse reset sequence. Signed-off-by: Bernhard Walle <bernhard@bwalle.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16Merge branch 'bcm7xxx-cleanups'David S. Miller
Florian Fainelli says: ==================== net: phy: bcm7xxx: Misc cleanups These two patches are cleanups to the BCM7xxx internal PHY driver: - fix a constant name missing a X (as in BCM7XXX) - add a macro to reduce the amount of code duplication to add new entries ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: phy: bcm7xxx: Reduce boilerplate code for 40nm EPHYFlorian Fainelli
Introduce a macro which helps adding new 40NM EPHY entries and reduces the amount of boilerplate code. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: phy: bcm7xxx: Make MII_BCM7XX_64CLK_MDIO naming consistentFlorian Fainelli
The driver is BCM7xxx, we were missing an additional X in the constant naming, fix that to be consistent. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-15igb: Add workaround for VLAN tag stripping on 82576Alexander Duyck
There was a workaround partially implemented for the 82576 that is needed in order for VLAN tag stripping to function correctly. The original code had side effects that would make it so the workaround was active on all MACs. I have updated the code so that the workaround is enabled, but limited to the 82576, or activated if we exceed the available unicast addresses. The workaround has a side effect of mirroring all of the traffic outgoing from the VFs back to the PF. As such it is not recommended to use the 82576 in promiscuous mode as it will take a performance hit, though this is now consistent with the performance as seen on the out-of-tree igb driver. I also limited the scope of the UTA bits all being set to only when the VMOLR register is enabled. This should limit the effects of the UTA register so that we don't pick up any excess traffic unless promiscuous mode has been enabled on the PF, whereas before the PF would have ended up in something equivalent to unicast promiscuous mode with VLAN filtering otherwise. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-15igb: Enable use of "bridge fdb add" to set unicast table entriesAlexander Duyck
This change makes it so that we can use the bridge utility to add a FDB entry for the PF to an igb port. By doing this we can enable the VFs to talk to virtual ports residing on top of the PF. In addition this should also address issues with MACVLANs trying to reside on top of the PF as well as they would have had similar issues when added to the PF with SR-IOV enabled. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-15igb: Drop unnecessary checks in transmit pathAlexander Duyck
This patch drops several checks that we dropped from ixgbe some ago. It should not be possible for us to be called with either of the conditional statements returning true so we can just drop them from the hot-path. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-24 22:25:53 +0000