summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-10-14Pull ibm into test branchLen Brown
2006-10-14Pull asus into test branchLen Brown
2006-10-14ACPI: check battery status on resume for un/plug events during sleepJiri Kosina
Add ->resume method to the ACPI battery handler to check if the battery state has changed during sleep. If yes, update the ACPI internal data structures for benefit of /proc/acpi/battery/. Signed-off-by: Jiri Kosina <jikos@jikos.cz> Cc: Stefan Seyfried <seife@suse.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPICA: Fix incorrect handling of PCI Express Root Bridge _HIDEiichiro Oiwa
I could not get correct PCI Express bus number from the structure of acpi_object_extra. I always get zero as bus number regardless of bus location. I found that there is incorrect comparison with _HID (PNP0A08) in acpi/events/evrgnini.c and PCI Express _BBN method always fail. Therefore, we always get zero as PCI Express bus number. http://bugzilla.kernel.org/show_bug.cgi?id=7145 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: asus_acpi: don't printk on writing garbage to proc filesAlexey Dobriyan
This reporting is useless (we errno anyway). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: asus_acpi: fix proc files parsingDarren Jenkins
ICC complains about a "Pointless comparsion of unsigned interger with zero" @ line 760 & 808 of asus_acpi.c parse_arg() mentioned below returns -E but it's copied into unsigned variable... Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: SCI interrupt source overrideKimball Murray
The Linux group at Stratus Technologies has come across an issue with SCI routing under ACPI. We were bitten by this when we made an x86_64 platform whose BIOS provides an Interrupt Source Override for the SCI itself. Apparently the override has no effect for the System Control Interrupt, and this appears to be because of the way the SCI is setup in the ACPI code. It does not handle the case where busirq != gsi. The code that sets up the SCI routing assumes that bus irq == global irq. So there is simply no provision for telling it otherwise. The attached patch provides this mechanism. This patch provided by David Bulkow, was tested on an i386 platform, which does not use the SCI override, and also on an x86_64 platform which does use an override. Signed-off-by: David Bulkow <david.bulkow@stratus.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: fix printk format warningsRandy Dunlap
Fix printk format warnings in drivers/acpi: drivers/acpi/tables/tbget.c:326: warning: format '%X' expects type 'unsigned int', but argument 5 has type 'long unsigned int' drivers/acpi/tables/tbrsdt.c:189: warning: format '%X' expects type 'unsigned int', but argument 5 has type 'long unsigned int' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: fix section for CPU init functionsPierre Ossman
The ACPI processor init functions should be marked as __cpuinit as they use structures marked with __cpuinitdata. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: update comments in motherboard.cLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: acpi_pci_link_set() can allocate with either GFP_ATOMIC or GFP_KERNELJiri Kosina
acpi_pci_link_set() allocates both with interrupts on and with interrupts off (resume-time), so check interrupts and decide on GFP_ATOMIC or GFP_KERNEL at run-time. Signed-off-by: Jiri Kosina <jikos@jikos.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: fix potential OOPS in power driver with CONFIG_ACPI_DEBUGDmitry Torokhov
device was set to null and used before set in a debug printk Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: ibm_acpi: delete obsolete documentationPavel Machek
As this module is now part of the kernel tree, there is no need for instructions on how to download it and build an external module. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: created a dedicated workqueue for notify() executionAlexey Y. Starikovskiy
http://bugzilla.kernel.org/show_bug.cgi?id=5534#c160 Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: Remove deferred execution from global lock acquire wakeup pathAlexey Y. Starikovskiy
On acquiring the ACPI global lock, if there were sleepers on the lock, we used to use acpi_os_execute() to defer a thread which would signal sleepers. Now just signal the semaphore directly. http://bugzilla.kernel.org/show_bug.cgi?id=5534#c159 Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14MSI S270 Laptop support: backlight, wlan, bluetooth statesLennart Poettering
Create a driver to support the platform-specific features of MSI S270 laptops (and maybe other MSI laptops). This driver implements a backlight device for controlling LCD brightness (/sys/class/backlight/msi-laptop-bl/). In addition it allows access to the WLAN and Bluetooth states through a platform driver (/sys/devices/platform/msi-laptop-pf/). Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: EC: export ec_transaction() for msi-laptop driverLennart Poettering
Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: EC: Simplify acpi_hw_low_level*() with inb()/outb().Denis M. Sadykov
Simplify acpi_hw_low_level_xxx() functions to inb() and outb(). Signed-off-by: Alexey Y. Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: EC: Unify poll and interrupt gpe handlersDenis M. Sadykov
Signed-off-by: Alexey Y. Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: EC: Unify poll and interrupt mode transaction functionsDenis M. Sadykov
Signed-off-by: Alexey Y. Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: EC: Remove unused variables and duplicated codeDenis M. Sadykov
Signed-off-by: Alexey Y. Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: EC: Remove unnecessary delay added by previous transation patch.Denis M. Sadykov
Remove unnecessary delay (50 ms) while reading data from EC in interrupt mode. Signed-off-by: Alexey Y. Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: consolidate functions in acpi ec driverLennart Poettering
Unify the following functions: acpi_ec_poll_read() acpi_ec_poll_write() acpi_ec_poll_query() acpi_ec_intr_read() acpi_ec_intr_write() acpi_ec_intr_query() into: acpi_ec_poll_transaction() acpi_ec_intr_transaction() These new functions take as arguments an ACPI EC command, a few bytes to write to the EC data register and a buffer for a few bytes to read from the EC data register. The old _read(), _write(), _query() are just special cases of these functions. Then unified the code in acpi_ec_poll_transaction() and acpi_ec_intr_transaction() a little more. Both functions are now just wrappers around the new acpi_ec_transaction_unlocked() function. The latter contains the EC access logic, the two original function now just do their special way of locking and call the the new function for the actual work. This saves a lot of very similar code. The primary reason for doing this, however, is that my driver for MSI 270 laptops needs to issue some non-standard EC commands in a safe way. Due to this I added a new exported function similar to ec_write()/ec_write() which is called ec_transaction() and is essentially just a wrapper around acpi_ec_{poll,intr}_transaction(). Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: Processor native C-states using MWAITVenkatesh Pallipadi
Intel processors starting with the Core Duo support support processor native C-state using the MWAIT instruction. Refer: Intel Architecture Software Developer's Manual http://www.intel.com/design/Pentium4/manuals/253668.htm Platform firmware exports the support for Native C-state to OS using ACPI _PDC and _CST methods. Refer: Intel Processor Vendor-Specific ACPI: Interface Specification http://www.intel.com/technology/iapc/acpi/downloads/302223.htm With Processor Native C-state, we use 'MWAIT' instruction on the processor to enter different C-states (C1, C2, C3). We won't use the special IO ports to enter C-state and no SMM mode etc required to enter C-state. Overall this will mean better C-state support. One major advantage of using MWAIT for all C-states is, with this and "treat interrupt as break event" feature of MWAIT, we can now get accurate timing for the time spent in C1, C2, .. states. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: sbs: fix module_param() initializersLebedev, Vladimir P
Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: sbs: check for NULL device pointerLebedev, Vladimir P
Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: ibm_acpi: Documentation the wan feature.Stefan Schmidt
Document the wan feature Jeremy Fitzhardinge added to ibm_acpi. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Borislav Deianov <borislav@users.sourceforge.net> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: ibm_acpi: Update documentation for brightness and volume.Stefan Schmidt
Document the change of the experimental flag for brightness and volume. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Borislav Deianov <borislav@users.sourceforge.net> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: ibm_acpi: Remove experimental status for brightness and volume.Stefan Schmidt
The brightness and volume features from ibm-acpi are stable. The experimental flag is no longer needed. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Borislav Deianov <borislav@users.sourceforge.net> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: asus_acpi: W3000 supportMarek W
Add support for W3000 (W3V) and indirectly fixes an issue with kmilo under KDE (it was triggering excessive LCD read error messages by querying asus_acpi module) allowing people (I am probably the only one who tested this) with W3000 to run kmilo. Cc: Karol Kozimor <sziwan@hell.org.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14V4L/DVB (4750): AGC command1/2 is board specificPatrick Boettcher
Added config-struct-parameter to take board-specific AGC command 1 and 2 into account. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4748): Fixed oops for Nova-T USB2Patrick Boettcher
When using the remote control with the Nova-T USB there was an Oops because of the recent DVB-USB-Adapter change. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4746): HM12 is YUV 4:2:0, not YUV 4:1:1Hans Verkuil
Fix comment in videodev2.h Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4744): The Samsung TCPN2121P30A does not have a tda9887Hans Verkuil
Contrary to all expections the Samsung TCPN2121P30A tuner does NOT have a tda9887. Remove the tda9887 flag from the tuner definition. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4743): Fix oops in VIDIOC_G_PARMJonathan Corbet
The call to v4l2_std_construct() in the VIDIOC_G_PARM handler treats vfd->current_norm as if it were an index - but it's not. The result is an oops if the driver has no vidioc_g_parm() method defined. Here's the fix. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4742): Drivers/media/video: handle sysfs errorsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4741): {ov511,stv680}: handle sysfs errorsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4740): Fixed an if-block to avoid floating with debug-messagesEnrico Scholz
The dbgarg() macro in videodev.c contains some printk() statements where only the first one is influenced by an if-statement. This causes floating with debug-messages which is fixed by this patch by adding a '{ ... }' pair. Signed-off-by: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4739): SECAM support for saa7113 into saa7115Pádraig Brady
Without the attached trivial patch, the saa7113 is set up for PAL when SECAM is selected and hence will see only show black and white for SECAM signals. Tested the patch against the saa7115 module in linux-2.6.17 with a Pinnacle 50e USB tuner (em28xx). Signed-off-by: Pádraig Brady <P@draigBrady.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4738): Bt8xx/dvb-bt8xx.c: check kmalloc() return value.Amit Choudhary
Check the return value of kmalloc() in function frontend_init(), in file drivers/media/dvb/bt8xx/dvb-bt8xx.c. Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4734): Tda826x: fix frontend selection for dvb_attachMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4733): Tda10086: fix frontend selection for dvb_attachMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4732): Fix spelling error in Kconfig help text for DVB_CORE_ATTACHUwe Bugla
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4731a): Kconfig: restore pvrusb2 menu itemsMichael Krufky
Looks like the pvrusb2 menu items were accidentally removed in git commit 1450e6bedc58c731617d99b4670070ed3ccc91b4 This patch restores the menu items so that the pvrusb2 driver can be built. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4729): Fix VIDIOC_G_FMT for NTSC in cx25840.Hans Verkuil
VIDIOC_G_FMT returned the sliced VBI types in the wrong lines for NTSC (three lines too low). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4727): Support status readout for saa713x based FM radioHartmut Hackmann
This patch adds readout for stereo and signal level for saa713x cards which use the saa713x as FM demodulator. These are many cards based on saa7133, tda8290 and tda8275a. FM channel search should work now. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4725): Fix vivi compile on pariscMatthew Wilcox
parisc (and several other architectures) don't have a dma_address in their sg list. Use the macro instead. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4692): Add WinTV-HVR3000 DVB-T supportSteven Toth
The WinTV-HVR3000 is currently defined for analog support only. This patch adds full DVB-T support. (DVB-S support will be added soon) Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-13Linux 2.6.19-rc2Linus Torvalds
That was slightly more painful than really necessary..
2006-10-13Include proper header file for PFN_DOWN()Linus Torvalds
The recent commit (99a10a60ba9bedcf5d70ef81414d3e03816afa3f) to fix up mmap_kmem() broke compiles because it used PFN_DOWN() without including <linux/pfn.h>. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 05:42:10 +0000