Age | Commit message (Collapse) | Author |
|
There's a potential deadlock case when remove the vsock device or
process the RESET event:
vsock_for_each_connected_socket:
spin_lock_bh(&vsock_table_lock) ----------- (1)
...
virtio_vsock_reset_sock:
lock_sock(sk) --------------------- (2)
...
spin_unlock_bh(&vsock_table_lock)
lock_sock() may do initiative schedule when the 'sk' is owned by
other thread at the same time, we would receivce a warning message
that "scheduling while atomic".
Even worse, if the next task (selected by the scheduler) try to
release a 'sk', it need to request vsock_table_lock and the deadlock
occur, cause the system into softlockup state.
Call trace:
queued_spin_lock_slowpath
vsock_remove_bound
vsock_remove_sock
virtio_transport_release
__vsock_release
vsock_release
__sock_release
sock_close
__fput
____fput
So we should not require sk_lock in this case, just like the behavior
in vhost_vsock or vmci.
Fixes: 0ea9e1d3a9e3 ("VSOCK: Introduce virtio_transport.ko")
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210812053056.1699-1-longpeng2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucounts fix from Eric Biederman:
"This fixes the ucount sysctls on big endian architectures.
The counts were expanded to be longs instead of ints, and the sysctl
code was overlooked, so only the low 32bit were being processed. On
litte endian just processing the low 32bits is fine, but on 64bit big
endian processing just the low 32bits results in the high order bits
instead of the low order bits being processed and nothing works
proper.
This change took a little bit to mature as we have the SYSCTL_ZERO,
and SYSCTL_INT_MAX macros that are only usable for sysctls operating
on ints, but unfortunately are not obviously broken. Which resulted in
the versions of this change working on big endian and not on little
endian, because the int SYSCTL_ZERO when extended 64bit wound up being
0x100000000. So we only allowed values greater than 0x100000000 and
less than 0faff. Which unfortunately broken everything that tried to
set the sysctls. (First reported with the windows subsystem for
linux).
I have tested this on x86_64 64bit after first reproducing the
problems with the earlier version of this change, and then verifying
the problems do not exist when we use appropriate long min and max
values for extra1 and extra2"
* 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: add missing data type changes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This seems to be a usual bump in the middle, containing lots of
pending ASoC fixes:
- Yet another PCM mmap regression fix
- Fix for ASoC DAPM prefix handling
- Various cs42l42 codec fixes
- PCM buffer reference fixes in a few ASoC drivers
- Fixes for ASoC SOF, AMD, tlv320, WM
- HD-audio quirks"
* tag 'sound-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits)
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 650 G8 Notebook PC
ALSA: pcm: Fix mmap breakage without explicit buffer setup
ALSA: hda: Add quirk for ASUS Flow x13
ASoC: cs42l42: Fix mono playback
ASoC: cs42l42: Constrain sample rate to prevent illegal SCLK
ASoC: cs42l42: Fix LRCLK frame start edge
ASoC: cs42l42: PLL must be running when changing MCLK_SRC_SEL
ASoC: cs42l42: Remove duplicate control for WNF filter frequency
ASoC: cs42l42: Fix inversion of ADC Notch Switch control
ASoC: SOF: Intel: hda-ipc: fix reply size checking
ASoC: SOF: Intel: Kconfig: fix SoundWire dependencies
ASoC: amd: Fix reference to PCM buffer address
ASoC: nau8824: Fix open coded prefix handling
ASoC: kirkwood: Fix reference to PCM buffer address
ASoC: uniphier: Fix reference to PCM buffer address
ASoC: xilinx: Fix reference to PCM buffer address
ASoC: intel: atom: Fix reference to PCM buffer address
ASoC: cs42l42: Fix bclk calculation for mono
ASoC: cs42l42: Don't allow SND_SOC_DAIFMT_LEFT_J
ASoC: cs42l42: Correct definition of ADC Volume control
...
|
|
Make wwan_create_dev() to return either valid or error pointer,
In some cases it may return NULL. Prevent this by converting
it to the respective error pointer.
Fixes: 9a44c1cc6388 ("net: Add a WWAN subsystem")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20210811124845.10955-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During unlink/rename/lease break, deferred work for close is
scheduled immediately but in an asynchronous manner which might
lead to race with actual(unlink/rename) commands.
This change will schedule close synchronously which will avoid
the race conditions with other commands.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When rename is executed on directory which has files for which
close is deferred, then rename will fail with EACCES.
This patch will try to close all deferred files when EACCES is received
and retry rename on a directory.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Cc: stable@vger.kernel.org # 5.13
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There is a TOCTOU issue in set_evtchn_to_irq. Rows in the evtchn_to_irq
mapping are lazily allocated in this function. The check whether the row
is already present and the row initialization is not synchronized. Two
threads can at the same time allocate a new row for evtchn_to_irq and
add the irq mapping to the their newly allocated row. One thread will
overwrite what the other has set for evtchn_to_irq[row] and therefore
the irq mapping is lost. This will trigger a BUG_ON later in
bind_evtchn_to_cpu:
INFO: pci 0000:1a:15.4: [1d0f:8061] type 00 class 0x010802
INFO: nvme 0000:1a:12.1: enabling device (0000 -> 0002)
INFO: nvme nvme77: 1/0/0 default/read/poll queues
CRIT: kernel BUG at drivers/xen/events/events_base.c:427!
WARN: invalid opcode: 0000 [#1] SMP NOPTI
WARN: Workqueue: nvme-reset-wq nvme_reset_work [nvme]
WARN: RIP: e030:bind_evtchn_to_cpu+0xc2/0xd0
WARN: Call Trace:
WARN: set_affinity_irq+0x121/0x150
WARN: irq_do_set_affinity+0x37/0xe0
WARN: irq_setup_affinity+0xf6/0x170
WARN: irq_startup+0x64/0xe0
WARN: __setup_irq+0x69e/0x740
WARN: ? request_threaded_irq+0xad/0x160
WARN: request_threaded_irq+0xf5/0x160
WARN: ? nvme_timeout+0x2f0/0x2f0 [nvme]
WARN: pci_request_irq+0xa9/0xf0
WARN: ? pci_alloc_irq_vectors_affinity+0xbb/0x130
WARN: queue_request_irq+0x4c/0x70 [nvme]
WARN: nvme_reset_work+0x82d/0x1550 [nvme]
WARN: ? check_preempt_wakeup+0x14f/0x230
WARN: ? check_preempt_curr+0x29/0x80
WARN: ? nvme_irq_check+0x30/0x30 [nvme]
WARN: process_one_work+0x18e/0x3c0
WARN: worker_thread+0x30/0x3a0
WARN: ? process_one_work+0x3c0/0x3c0
WARN: kthread+0x113/0x130
WARN: ? kthread_park+0x90/0x90
WARN: ret_from_fork+0x3a/0x50
This patch sets evtchn_to_irq rows via a cmpxchg operation so that they
will be set only once. The row is now cleared before writing it to
evtchn_to_irq in order to not create a race once the row is visible for
other threads.
While at it, do not require the page to be zeroed, because it will be
overwritten with -1's in clear_evtchn_to_irq_row anyway.
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Fixes: d0b075ffeede ("xen/events: Refactor evtchn_to_irq array to be dynamically allocated")
Link: https://lore.kernel.org/r/20210812130930.127134-1-mheyne@amazon.de
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Skip (omit) any version string info that is parenthesized.
Warning: objdump version 15) is older than 2.19
Warning: Skipping posttest.
where 'objdump -v' says:
GNU objdump (GNU Binutils; SUSE Linux Enterprise 15) 2.35.1.20201123-7.18
Fixes: 8bee738bb1979 ("x86: Fix objdump version check in chkobjdump.awk for different formats.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210731000146.2720-1-rdunlap@infradead.org
|
|
The current comment states that we check if the 64-bit kernel mapping
overlaps with the last 4K of the address space that is reserved to
error values in create_kernel_page_table, which is not the case since it
is done in setup_vm. But anyway, remove the reference to any function
and simply note that in 64-bit kernel, the check should be done as soon
as the kernel mapping base address is known.
Fixes: db6b84a368b4 ("riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE")
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The RISC-V special option '-mno-relax' which to disable linker relaxations
is supported by GCC8+. For GCC7 and lower versions do not support this
option.
Fixes: fba8a8674f68 ("RISC-V: Add kexec support")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
On PowerVM, CPU-less nodes can be populated with hot-plugged CPUs at
runtime. Today, the IPI is not created for such nodes, and hot-plugged
CPUs use a bogus IPI, which leads to soft lockups.
We can not directly allocate and request the IPI on demand because
bringup_up() is called under the IRQ sparse lock. The alternative is
to allocate the IPIs for all possible nodes at startup and to request
the mapping on demand when the first CPU of a node is brought up.
Fixes: 7dcc37b3eff9 ("powerpc/xive: Map one IPI interrupt per node")
Cc: stable@vger.kernel.org # v5.13
Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210807072057.184698-1-clg@kaod.org
|
|
single_step_exception() is called by emulate_single_step() which
is called from (at least) alignment exception() handler and
program_check_exception() handler.
Redefine it as a regular __single_step_exception() which is called
by both single_step_exception() handler and emulate_single_step()
function.
Fixes: 3a96570ffceb ("powerpc: convert interrupt handlers to use wrappers")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aed174f5cbc06f2cf95233c071d8aac948e46043.1628611921.git.christophe.leroy@csgroup.eu
|
|
An interrupt handler shall not be called from another interrupt
handler otherwise this leads to problems like the following:
Kernel attempted to write user page (afd4fa84) - exploit attempt? (uid: 1000)
------------[ cut here ]------------
Bug: Write fault blocked by KUAP!
WARNING: CPU: 0 PID: 1617 at arch/powerpc/mm/fault.c:230 do_page_fault+0x484/0x720
Modules linked in:
CPU: 0 PID: 1617 Comm: sshd Tainted: G W 5.13.0-pmac-00010-g8393422eb77 #7
NIP: c001b77c LR: c001b77c CTR: 00000000
REGS: cb9e5bc0 TRAP: 0700 Tainted: G W (5.13.0-pmac-00010-g8393422eb77)
MSR: 00021032 <ME,IR,DR,RI> CR: 24942424 XER: 00000000
GPR00: c001b77c cb9e5c80 c1582c00 00000021 3ffffbff 085b0000 00000027 c8eb644c
GPR08: 00000023 00000000 00000000 00000000 24942424 0063f8c8 00000000 000186a0
GPR16: afd52dd4 afd52dd0 afd52dcc afd52dc8 0065a990 c07640c4 cb9e5e98 cb9e5e90
GPR24: 00000040 afd4fa96 00000040 02000000 c1fda6c0 afd4fa84 00000300 cb9e5cc0
NIP [c001b77c] do_page_fault+0x484/0x720
LR [c001b77c] do_page_fault+0x484/0x720
Call Trace:
[cb9e5c80] [c001b77c] do_page_fault+0x484/0x720 (unreliable)
[cb9e5cb0] [c000424c] DataAccess_virt+0xd4/0xe4
--- interrupt: 300 at __copy_tofrom_user+0x110/0x20c
NIP: c001f9b4 LR: c03250a0 CTR: 00000004
REGS: cb9e5cc0 TRAP: 0300 Tainted: G W (5.13.0-pmac-00010-g8393422eb77)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 48028468 XER: 20000000
DAR: afd4fa84 DSISR: 0a000000
GPR00: 20726f6f cb9e5d80 c1582c00 00000004 cb9e5e3a 00000016 afd4fa80 00000000
GPR08: 3835202d 72777872 2d78722d 00000004 28028464 0063f8c8 00000000 000186a0
GPR16: afd52dd4 afd52dd0 afd52dcc afd52dc8 0065a990 c07640c4 cb9e5e98 cb9e5e90
GPR24: 00000040 afd4fa96 00000040 cb9e5e0c 00000daa a0000000 cb9e5e98 afd4fa56
NIP [c001f9b4] __copy_tofrom_user+0x110/0x20c
LR [c03250a0] _copy_to_iter+0x144/0x990
--- interrupt: 300
[cb9e5d80] [c03e89c0] n_tty_read+0xa4/0x598 (unreliable)
[cb9e5df0] [c03e2a0c] tty_read+0xdc/0x2b4
[cb9e5e80] [c0156bf8] vfs_read+0x274/0x340
[cb9e5f00] [c01571ac] ksys_read+0x70/0x118
[cb9e5f30] [c0016048] ret_from_syscall+0x0/0x28
--- interrupt: c00 at 0xa7855c88
NIP: a7855c88 LR: a7855c5c CTR: 00000000
REGS: cb9e5f40 TRAP: 0c00 Tainted: G W (5.13.0-pmac-00010-g8393422eb77)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 2402446c XER: 00000000
GPR00: 00000003 afd4ec70 a72137d0 0000000b afd4ecac 00004000 0065a990 00000800
GPR08: 00000000 a7947930 00000000 00000004 c15831b0 0063f8c8 00000000 000186a0
GPR16: afd52dd4 afd52dd0 afd52dcc afd52dc8 0065a990 0065a9e0 00000001 0065fac0
GPR24: 00000000 00000089 00664050 00000000 00668e30 a720c8dc a7943ff4 0065f9b0
NIP [a7855c88] 0xa7855c88
LR [a7855c5c] 0xa7855c5c
--- interrupt: c00
Instruction dump:
3884aa88 38630178 48076861 807f0080 48042e45 2f830000 419e0148 3c80c079
3c60c076 38841be4 386301c0 4801f705 <0fe00000> 3860000b 4bfffe30 3c80c06b
---[ end trace fd69b91a8046c2e5 ]---
Here the problem is that by re-enterring an exception handler,
kuap_save_and_lock() is called a second time with this time KUAP
access locked, leading to regs->kuap being overwritten hence
KUAP not being unlocked at exception exit as expected.
Do not call do_IRQ() from timer_interrupt() directly. Instead,
redefine do_IRQ() as a standard function named __do_IRQ(), and
call it from both do_IRQ() and time_interrupt() handlers.
Fixes: 3a96570ffceb ("powerpc: convert interrupt handlers to use wrappers")
Cc: stable@vger.kernel.org # v5.12+
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c17d234f4927d39a1d7100864a8e1145323d33a0.1628611927.git.christophe.leroy@csgroup.eu
|
|
We still have quite a bit more work to do with overall reworking of
the ttm-based dg1 code, but the uapi stuff is now finalized with the
latest pull. So remove that.
This also fixes kerneldoc build warnings because we've included the
same headers in two places, resulting in sphinx complaining about
duplicated symbols. This regression has been created when we moved the
uapi definitions to the real include/uapi/ folder in 727ecd99a4c9
("drm/doc/rfc: drop the i915_gem_lmem.h header")
v2: Fix a few references that I missed, the htmldocs build took
forever.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by Stephen Rothwell <sfr@canb.auug.org.au> (v1)
References: https://lore.kernel.org/dri-devel/20210603193242.1ce99344@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 727ecd99a4c9 ("drm/doc/rfc: drop the i915_gem_lmem.h header")
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210810142748.1983271-1-daniel.vetter@ffwll.ch
(cherry picked from commit dae2d28832968751f7731336b560a4a84a197b76)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The SFC_DONE register lives within the corresponding VD0/VD2/VD4/VD6
forcewake domain and is not accessible if the vdbox in that domain is
fused off and the forcewake is not initialized.
This mistake went unnoticed because until recently we were using the
wrong register offset for the SFC_DONE register; once the register
offset was corrected, we started hitting errors like
<4> [544.989065] i915 0000:cc:00.0: Uninitialized forcewake domain(s) 0x80 accessed at 0x1ce000
on parts with fused-off vdbox engines.
Fixes: e50dbdbfd9fb ("drm/i915/tgl: Add SFC instdone to error state")
Fixes: 9c9c6d0ab08a ("drm/i915: Correct SFC_DONE register offset")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210806174130.1058960-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit c5589bb5dccb0c5cb74910da93663f489589f3ce)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Changed Fixes tag to match the cherry-picked 82929a2140eb]
|
|
Till DISPLAY12 the PIPE_MISC bits 5-7 are used to set the
Dithering BPC, with valid values of 6, 8, 10 BPC.
For ADLP+ these bits are used to set the PORT OUTPUT BPC, with valid
values of: 6, 8, 10, 12 BPC, and need to be programmed whether
dithering is enabled or not.
This patch:
-corrects the bits 5-7 for PIPE MISC register for 12 BPC.
-renames the bits and mask to have generic names for these bits for
dithering bpc and port output bpc.
v3: Added a note for MIPI DSI which uses the PIPE_MISC for readout
for pipe_bpp. (Uma Shankar)
v2: Added 'display' to the subject and fixes tag. (Uma Shankar)
Fixes: 756f85cffef2 ("drm/i915/bdw: Broadwell has PIPEMISC")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811051857.109723-1-ankit.k.nautiyal@intel.com
(cherry picked from commit 70418a68713c13da3f36c388087d0220b456a430)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The call to sja1105_mdiobus_unregister is present in the error path but
absent from the main driver unbind path.
Fixes: 5a8f09748ee7 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IRQs are getting armed on shutdown causing the system to immediately
wake back up.
Link: https://lkml.org/lkml/2021/8/2/1114
Reported-by: nix.or.die@googlemail.com
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
CC: Raul E Rangel <rrangel@chromium.org>
Fixes: d62bd5ce12d7 ("pinctrl: amd: Implement irq_set_wake")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20210809201513.12367-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This reverts commit 0efea3c649f0 because of:
- The returning -ENOBUF error is fine on socket buffer allocation.
- There is side effect in the calling path
tipc_node_xmit()->tipc_link_xmit() when checking error code returning.
Fixes: 0efea3c649f0 ("tipc: Return the correct errno code")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ocelot driver makes use of regmap, wrapping it with driver specific
operations that are thin wrappers around the core regmap APIs. These are
exported with EXPORT_SYMBOL, dropping the _GPL from the core regmap
exports which is frowned upon. Add _GPL suffixes to at least the APIs that
are doing register I/O.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull orphan section linker fix from Kees Cook:
- Handle changes to Clang's Sanitizer section layout (Nathan
Chancellor)
* tag 'orphans-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
vmlinux.lds.h: Handle clang's module.{c,d}tor sections
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
- Fix typo in user notification documentation (Rodrigo Campos)
- Fix userspace counter report when using TSYNC (Hsuan-Chi Kuo, Wiktor
Garbacz)
* tag 'seccomp-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Fix setting loaded filter count during TSYNC
Documentation: seccomp: Fix typo in user notification
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.14-2021-08-11:
amdgpu:
- Yellow carp update
- RAS EEPROM fixes
- BACO/BOCO fixes
- Fix a memory leak in an error path
- Freesync fix
- VCN harvesting fix
- Display fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812022153.4005-1-alexander.deucher@amd.com
|
|
Some arches support cmpxchg() on 4-byte and 8-byte only.
Increase mr_ifc_count width to 32bit to fix this problem.
Fixes: 4a2b285e7e10 ("net: igmp: fix data-race in igmp_ifc_timer_expire()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210811195715.3684218-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I'm still going to continue looking after the Renesas Ethernet drivers and
device tree bindings. Now my new employer, Open Mobile Platform (OMP), will
pay for all my upstream work. Let's switch to my OMP email for the reviews.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/9c212711-a0d7-39cd-7840-ff7abf938da1@omp.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently if BBR congestion control is initialized after more than 2B
packets have been delivered, depending on the phase of the
tp->delivered counter the tracking of BBR round trips can get stuck.
The bug arises because if tp->delivered is between 2^31 and 2^32 at
the time the BBR congestion control module is initialized, then the
initialization of bbr->next_rtt_delivered to 0 will cause the logic to
believe that the end of the round trip is still billions of packets in
the future. More specifically, the following check will fail
repeatedly:
!before(rs->prior_delivered, bbr->next_rtt_delivered)
and thus the connection will take up to 2B packets delivered before
that check will pass and the connection will set:
bbr->round_start = 1;
This could cause many mechanisms in BBR to fail to trigger, for
example bbr_check_full_bw_reached() would likely never exit STARTUP.
This bug is 5 years old and has not been observed, and as a practical
matter this would likely rarely trigger, since it would require
transferring at least 2B packets, or likely more than 3 terabytes of
data, before switching congestion control algorithms to BBR.
This patch is a stable candidate for kernels as far back as v4.9,
when tcp_bbr.c was added.
Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kevin Yang <yyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210811024056.235161-1-ncardwell@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drivers such as sja1105 and stmmac that call xpcs_create() expects an
error returned by the pcs-xpcs module, but this was not the case on
failed to allocate memory.
Fixed this by returning an -ENOMEM instead of a NULL pointer.
Fixes: 3ad1d171548e ("net: dsa: sja1105: migrate to xpcs for SGMII")
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210810085812.1808466-1-vee.khee.wong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After migrating my laptop from 4.19-LTS to 5.4-LTS a while ago I noticed
that my Ethernet port to which a bond and a VLAN interface are attached
appeared to remain up after resuming from suspend with the cable unplugged
(and that problem still persists with 5.10-LTS).
It happens that the following happens:
- the network driver (e1000e here) prepares to suspend, calls e1000e_down()
which calls netif_carrier_off() to signal that the link is going down.
- netif_carrier_off() adds a link_watch event to the list of events for
this device
- the device is completely stopped.
- the machine suspends
- the cable is unplugged and the machine brought to another location
- the machine is resumed
- the queued linkwatch events are processed for the device
- the device doesn't yet have the __LINK_STATE_PRESENT bit and its events
are silently dropped
- the device is resumed with its link down
- the upper VLAN and bond interfaces are never notified that the link had
been turned down and remain up
- the only way to provoke a change is to physically connect the machine
to a port and possibly unplug it.
The state after resume looks like this:
$ ip -br li | egrep 'bond|eth'
bond0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP>
eth0 DOWN e8:6a:64:64:64:64 <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP>
eth0.2@eth0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP>
Placing an explicit call to netdev_state_change() either in the suspend
or the resume code in the NIC driver worked around this but the solution
is not satisfying.
The issue in fact really is in link_watch that loses events while it
ought not to. It happens that the test for the device being present was
added by commit 124eee3f6955 ("net: linkwatch: add check for netdevice
being present to linkwatch_do_dev") in 4.20 to avoid an access to
devices that are not present.
Instead of dropping events, this patch proceeds slightly differently by
postponing their handling so that they happen after the device is fully
resumed.
Fixes: 124eee3f6955 ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev")
Link: https://lists.openwall.net/netdev/2018/03/15/62
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210809160628.22623-1-w@1wt.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 08a9ad8bf607 ("block/mq-deadline: Add cgroup support")
and a follow-up commit c06bc5a3fb42 ("block/mq-deadline: Remove a
WARN_ON_ONCE() call"). The added cgroup support has the following issues:
* It breaks cgroup interface file format rule by adding custom elements to a
nested key-value file.
* It registers mq-deadline as a cgroup-aware policy even though all it's
doing is collecting per-cgroup stats. Even if we need these stats, this
isn't the right way to add them.
* It hasn't been reviewed from cgroup side.
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A recent change in LLVM causes module_{c,d}tor sections to appear when
CONFIG_K{A,C}SAN are enabled, which results in orphan section warnings
because these are not handled anywhere:
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_ctor) is being placed in '.text.asan.module_ctor'
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_dtor) is being placed in '.text.asan.module_dtor'
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.tsan.module_ctor) is being placed in '.text.tsan.module_ctor'
Fangrui explains: "the function asan.module_ctor has the SHF_GNU_RETAIN
flag, so it is in a separate section even with -fno-function-sections
(default)".
Place them in the TEXT_TEXT section so that these technologies continue
to work with the newer compiler versions. All of the KASAN and KCSAN
KUnit tests continue to pass after this change.
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1432
Link: https://github.com/llvm/llvm-project/commit/7b789562244ee941b7bf2cefeb3fc08a59a01865
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210731023107.1932981-1-nathan@kernel.org
|
|
Pick up some small dax cleanups that make some of Ira's follow on work
easier.
|
|
Use "fallthrough;" to address:
tools/testing/nvdimm/test/nfit.c: In function ‘nd_intel_test_finish_query’:
tools/testing/nvdimm/test/nfit.c:436:37: warning: this statement may
fall through [-Wimplicit-fallthrough=]
436 | fw->missed_activate = false;
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~
tools/testing/nvdimm/test/nfit.c:438:9: note: here
438 | case FW_STATE_UPDATED:
| ^~~~
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/162767522046.3313209.14767278726893995797.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
There are a few scenarios where init_active_labels() can return without
registering deactivate_labels() to run when the region is disabled. In
particular label error injection creates scenarios where a DIMM is
disabled, but labels on other DIMMs in the region become activated.
Arrange for init_active_labels() to always register deactivate_labels().
Reported-by: Krzysztof Kensicki <krzysztof.kensicki@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: bf9bccc14c05 ("libnvdimm: pmem label sets and namespace instantiation.")
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/162766356450.3223041.1183118139023841447.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Fix the NFIT parsing code to treat a 0 index in a SPA Range Structure as
a special case and not match Region Mapping Structures that use 0 to
indicate that they are not mapped. Without this fix some platform BIOS
descriptions of "virtual disk" ranges do not result in the pmem driver
attaching to the range.
Details:
In addition to typical persistent memory ranges, the ACPI NFIT may also
convey "virtual" ranges. These ranges are indicated by a UUID in the SPA
Range Structure of UUID_VOLATILE_VIRTUAL_DISK, UUID_VOLATILE_VIRTUAL_CD,
UUID_PERSISTENT_VIRTUAL_DISK, or UUID_PERSISTENT_VIRTUAL_CD. The
critical difference between virtual ranges and UUID_PERSISTENT_MEMORY,
is that virtual do not support associations with Region Mapping
Structures. For this reason the "index" value of virtual SPA Range
Structures is allowed to be 0. If a platform BIOS decides to represent
NVDIMMs with disconnected "Region Mapping Structures" (range-index ==
0), the kernel may falsely associate them with standalone ranges where
the "SPA Range Structure Index" is also zero. When this happens the
driver may falsely require labels where "virtual disks" are expected to
be label-less. I.e. "label-less" is where the namespace-range ==
region-range and the pmem driver attaches with no user action to create
a namespace.
Cc: Jacek Zloch <jacek.zloch@intel.com>
Cc: Lukasz Sobieraj <lukasz.sobieraj@intel.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Cc: <stable@vger.kernel.org>
Fixes: c2f32acdf848 ("acpi, nfit: treat virtual ramdisk SPA as pmem region")
Reported-by: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
Reported-by: Damian Bassa <damian.bassa@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/162870796589.2521182.1240403310175570220.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The desired behavior is to set the caller's filter count to thread's.
This value is reported via /proc, so this fixes the inaccurate count
exposed to userspace; it is not used for reference counting, etc.
Signed-off-by: Hsuan-Chi Kuo <hsuanchikuo@gmail.com>
Link: https://lore.kernel.org/r/20210304233708.420597-1-hsuanchikuo@gmail.com
Co-developed-by: Wiktor Garbacz <wiktorg@google.com>
Signed-off-by: Wiktor Garbacz <wiktorg@google.com>
Link: https://lore.kernel.org/lkml/20210810125158.329849-1-wiktorg@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Fixes: c818c03b661c ("seccomp: Report number of loaded filters in /proc/$pid/status")
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.14-2
* Fix the software mapping of GPIOs on Intel Tiger Lake-H
The following is an automated git shortlog grouped by driver:
tigerlake:
- Fix GPIO mapping for newer version of software
|
|
In k210_fpioa_probe(), add missing calls to clk_disable_unprepare() in
case of error after cenabling the clk and pclk clocks. Also add missing
error handling when enabling pclk.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210806004311.52859-1-damien.lemoal@wdc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes for Linux 5.14
1. Fix dpi bridge bug.
2. Fix cursor plane no update.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210809150604.32426-1-chunkuang.hu@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Fix FPU_STATUS update
- Update my email address
- Other spellos and fixes
* tag 'arc-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
MAINTAINERS: update Vineet's email address
ARC: fp: set FPU_STATUS.FWE to enable FPU_STATUS update on context switch
ARC: Fix CONFIG_STACKDEPOT
arc: Fix spelling mistake and grammar in Kconfig
arc: Prefer unsigned int to bare use of unsigned
|
|
Append i2c-sysfs to toctree in order to get rid of building warnings.
Fixes: 31df7195b100 ("Documentation: i2c: Add doc for I2C sysfs")
Signed-off-by: Hu Haowen <src.res@email.cn>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
If an i2c driver happens to not provide the full amount of data that a
user asks for, it is possible that some uninitialized data could be sent
to userspace. While all in-kernel drivers look to be safe, just be sure
by initializing the buffer to zero before it is passed to the i2c driver
so that any future drivers will not have this issue.
Also properly copy the amount of data recvieved to the userspace buffer,
as pointed out by Dan Carpenter.
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Similar NULL deref was originally fixed by graceful teardown sequence -
https://lore.kernel.org/linux-i2c/1597106560-79693-1-git-send-email-dphadke@linux.microsoft.com
After this, a tasklet was added to take care of FIFO full condition for large i2c
transaction.
https://lore.kernel.org/linux-arm-kernel/20201102035433.6774-1-rayagonda.kokatanur@broadcom.com/
This introduced regression, a new race condition between tasklet enabling
interrupts and client unreg teardown sequence.
Kill tasklet before unreg_slave() masks bits in IE_OFFSET.
Updated teardown sequence -
(1) disable_irq()
(2) Kill tasklet
(3) Mask event enable bits in control reg
(4) Erase slave address (avoid further writes to rx fifo)
(5) Flush tx and rx FIFOs
(6) Clear pending event (interrupt) bits in status reg
(7) Set client pointer to NULL
(8) enable_irq()
--
Unable to handle kernel read from unreadable memory at virtual address 0000000000000320
Mem abort info:
ESR = 0x96000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000009212a000
[0000000000000320] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O
Hardware name: Overlake (DT)
pstate: 40400085 (nZcv daIf +PAN -UAO -TCO BTYPE=--)
pc : bcm_iproc_i2c_slave_isr+0x2b8/0x8e4
lr : bcm_iproc_i2c_slave_isr+0x1c8/0x8e4
sp : ffff800010003e70
x29: ffff800010003e80 x28: ffffda017acdc000
x27: ffffda017b0ae000 x26: ffff800010004000
x25: ffff800010000000 x24: ffffda017af4a168
x23: 0000000000000073 x22: 0000000000000000
x21: 0000000001400000 x20: 0000000001000000
x19: ffff06f09583f880 x18: 00000000fa83b2da
x17: 000000000000b67e x16: 0000000002edb2f3
x15: 00000000000002c7 x14: 00000000000002c7
x13: 0000000000000006 x12: 0000000000000033
x11: 0000000000000000 x10: 0000000001000000
x9 : 0000000003289312 x8 : 0000000003289311
x7 : 02d0cd03a303adbc x6 : 02d18e7f0a4dfc6c
x5 : 02edb2f33f76ea68 x4 : 00000000fa83b2da
x3 : ffffda017af43cd0 x2 : ffff800010003e74
x1 : 0000000001400000 x0 : 0000000000000000
Call trace:
bcm_iproc_i2c_slave_isr+0x2b8/0x8e4
bcm_iproc_i2c_isr+0x178/0x290
__handle_irq_event_percpu+0xd0/0x200
handle_irq_event+0x60/0x1a0
handle_fasteoi_irq+0x130/0x220
__handle_domain_irq+0x8c/0xcc
gic_handle_irq+0xc0/0x120
el1_irq+0xcc/0x180
finish_task_switch+0x100/0x1d8
__schedule+0x61c/0x7a0
schedule_idle+0x28/0x44
do_idle+0x254/0x28c
cpu_startup_entry+0x28/0x2c
rest_init+0xc4/0xd0
arch_call_rest_init+0x14/0x1c
start_kernel+0x33c/0x3b8
Code: f9423260 910013e2 11000509 b9047a69 (f9419009)
---[ end trace 4781455b2a7bec15 ]---
Fixes: 4d658451c9d6 ("i2c: iproc: handle rx fifo full interrupt")
Signed-off-by: Dhananjay Phadke <dphadke@linux.microsoft.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
I got a memleak report:
BUG: memory leak
unreferenced object 0x607ee521a658 (size 240):
comm "syz-executor.0", pid 955, jiffies 4294780569 (age 16.449s)
hex dump (first 32 bytes, cpu 1):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d830ea5a>] br_multicast_add_port+0x1c2/0x300 net/bridge/br_multicast.c:1693
[<00000000274d9a71>] new_nbp net/bridge/br_if.c:435 [inline]
[<00000000274d9a71>] br_add_if+0x670/0x1740 net/bridge/br_if.c:611
[<0000000012ce888e>] do_set_master net/core/rtnetlink.c:2513 [inline]
[<0000000012ce888e>] do_set_master+0x1aa/0x210 net/core/rtnetlink.c:2487
[<0000000099d1cafc>] __rtnl_newlink+0x1095/0x13e0 net/core/rtnetlink.c:3457
[<00000000a01facc0>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488
[<00000000acc9186c>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5550
[<00000000d4aabb9c>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504
[<00000000bc2e12a3>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<00000000bc2e12a3>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340
[<00000000e4dc2d0e>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929
[<000000000d22c8b3>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<000000000d22c8b3>] sock_sendmsg+0x139/0x170 net/socket.c:674
[<00000000e281417a>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350
[<00000000237aa2ab>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404
[<000000004f2dc381>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433
[<0000000005feca6c>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47
[<000000007304477d>] entry_SYSCALL_64_after_hwframe+0x44/0xae
On error path of br_add_if(), p->mcast_stats allocated in
new_nbp() need be freed, or it will be leaked.
Fixes: 1080ab95e3c7 ("net: bridge: add support for IGMP/MLD stats and export them via netlink")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210809132023.978546-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
by drivers towards the bridge
The blamed commit added a new field to struct switchdev_notifier_fdb_info,
but did not make sure that all call paths set it to something valid.
For example, a switchdev driver may emit a SWITCHDEV_FDB_ADD_TO_BRIDGE
notifier, and since the 'is_local' flag is not set, it contains junk
from the stack, so the bridge might interpret those notifications as
being for local FDB entries when that was not intended.
To avoid that now and in the future, zero-initialize all
switchdev_notifier_fdb_info structures created by drivers such that all
newly added fields to not need to touch drivers again.
Fixes: 2c4eca3ef716 ("net: bridge: switchdev: include local flag in FDB notifications")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20210810115024.1629983-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ignore fdb flags when adding port extern learn entries and always set
BR_FDB_LOCAL flag when adding bridge extern learn entries. This is
closest to the behaviour we had before and avoids breaking any use cases
which were allowed.
This patch fixes iproute2 calls which assume NUD_PERMANENT and were
allowed before, example:
$ bridge fdb add 00:11:22:33:44:55 dev swp1 extern_learn
Extern learn entries are allowed to roam, but do not expire, so static
or dynamic flags make no sense for them.
Also add a comment for future reference.
Fixes: eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space")
Fixes: 0541a6293298 ("net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB entry")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210810110010.43859-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the secondary_exec_controls_get() accessor in vmx_has_waitpkg() to
effectively get the controls for the current VMCS, as opposed to using
vmx->secondary_exec_controls, which is the cached value of KVM's desired
controls for vmcs01 and truly not reflective of any particular VMCS.
While the waitpkg control is not dynamic, i.e. vmcs01 will always hold
the same waitpkg configuration as vmx->secondary_exec_controls, the same
does not hold true for vmcs02 if the L1 VMM hides the feature from L2.
If L1 hides the feature _and_ does not intercept MSR_IA32_UMWAIT_CONTROL,
L2 could incorrectly read/write L1's virtual MSR instead of taking a #GP.
Fixes: 6e3ba4abcea5 ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210810171952.2758100-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Small set of pdx86 fixes for 5.14"
* tag 'platform-drivers-x86-v5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: pcengines-apuv2: Add missing terminating entries to gpio-lookup tables
platform/x86: Make dual_accel_detect() KIOX010A + KIOX020A detect more robust
platform/x86: Add and use a dual_accel_detect() helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix several bugs in overlayfs"
* tag 'ovl-fixes-5.14-rc6-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: prevent private clone if bind mount is not allowed
ovl: fix uninitialized pointer read in ovl_lookup_real_one()
ovl: fix deadlock in splice write
ovl: skip stale entries in merge dir cache iteration
|
|
RHBZ: 1972502
PATH_MAX is 4096 but PAGE_SIZE can be >4096 on some architectures
such as ppc and would thus write beyond the end of the actual object.
Cc: <stable@vger.kernel.org>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Suggested-by: Brian foster <bfoster@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Daniel Borkmann says:
====================
bpf 2021-08-10
We've added 5 non-merge commits during the last 2 day(s) which contain
a total of 7 files changed, 27 insertions(+), 15 deletions(-).
1) Fix missing bpf_read_lock_trace() context for BPF loader progs, from Yonghong Song.
2) Fix corner case where BPF prog retrieves wrong local storage, also from Yonghong Song.
3) Restrict availability of BPF write_user helper behind lockdown, from Daniel Borkmann.
4) Fix multiple kernel-doc warnings in BPF core, from Randy Dunlap.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, core: Fix kernel-doc notation
bpf: Fix potentially incorrect results with bpf_get_local_storage()
bpf: Add missing bpf_read_[un]lock_trace() for syscall program
bpf: Add lockdown check for probe_write_user helper
bpf: Add _kernel suffix to internal lockdown_bpf_read
====================
Link: https://lore.kernel.org/r/20210810144025.22814-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|