summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-02dm9601: Fix receive MTUPeter Korsgaard
dm9601 didn't take the ethernet header into account when calculating RX MTU, causing packets bigger than 1486 to fail. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-02mv643xx_eth: Do not modify struct netdev tx_queue_lenDale Farnsworth
This driver erroneously zeros dev->tx_queue_len, since mp->tx_ring_size has not yet been initialized. Actually, the driver shouldn't modify tx_queue_len at all and should leave the value set by alloc_etherdev(), currently 1000. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-02qla3xxx: bugfix: Fix VLAN rx completion handling.Ron Mercer
Fix 4032 chip undocumented "feature" where bit-8 is set if the inbound completion is for a VLAN. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-02qla3xxx: bugfix: Add memory barrier before accessing rx completion.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-01Linux 2.6.23-rc9Linus Torvalds
No, I didn't want to do this, but we had more stuff go in after -rc8 than we had in the previous -rc. Gaah.
2007-10-01Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] vmlinux.lds.S: Handle note sections [MIPS] Fix value of O_TRUNC
2007-10-01x86_64: increase VDSO_TEXT_OFFSET for ancient binutilsAndi Kleen
For some reason old binutils genertate larger headers so increase the text offset of the vdso to avoid linker errors. Roland McGrath explains: "There are extra symbols in the '.dynsym' section that are responsible for the size difference (They also cause corresponding inflation in '.gnu.version') Older ld's wrongly generated these unneeded symbols in .dynsym. This was fixed not all that long ago (2006); binutils-2.17.50.0.6 might be the first fixed version, but I have not verified for sure where the cutoff was. The unneeded symbols et al from old ld add almost 700 bytes excess. This limits fairly tightly the amount by which the actual text and data in the vDSO can grow in the future without pushing the whole file over 4kb. If it does grow later on, we should consider changing the layout with a config option or something to pack it better without that padding, when building the kernel with newer binutils." Signed-off-by: Andi Kleen <ak@suse.de> Cc: Roland McGrath <roland@redhat.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-01Fix possible splice() mmap_sem deadlockLinus Torvalds
Nick Piggin points out that splice isn't being good about the mmap semaphore: while two readers can nest inside each others, it does leave a possible deadlock if a writer (ie a new mmap()) comes in during that nesting. Original "just move the locking" patch by Nick, replaced by one by me based on an optimistic pagefault_disable(). And then Jens tested and updated that patch. Reported-by: Nick Piggin <npiggin@suse.de> Tested-by: Jens Axboe <jens.axboe@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-01Merge branch 'fixes-jgarzik' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 * 'fixes-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6: [PATCH] libertas: build problems when partially modular
2007-10-01Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Resolve PCI section warnings
2007-10-01Merge branch 'master' of ↵Linus Torvalds
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (6052): ivtv: fix udma yuv bug
2007-10-01Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: Revert "[XFS] Avoid replaying inode buffer initialisation log items if .. [ Fixed it and added some commit messages by hand to that branch - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-01Revert "[XFS] Avoid replaying inode buffer initialisation log items if ↵Tim Shimmin
on-disk version is newer." This reverts commit b394e43e995d08821588a22561c6a71a63b4ff27. Lachlan McIlroy says: It tried to fix an issue where log replay is replaying an inode cluster initialisation transaction that should not be replayed because the inode cluster on disk is more up to date. Since we don't log file sizes (we rely on inode flushing to get them to disk) then we can't just replay all the transations in the log and expect the inode to be completely restored. We lose file size updates. Unfortunately this fix is causing more (serious) problems than it is fixing. SGI-PV: 969656 SGI-Modid: xfs-linux-melb:xfs-kern:29804a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-01robust futex thread exit raceMartin Schwidefsky
Calling handle_futex_death in exit_robust_list for the different robust mutexes of a thread basically frees the mutex. Another thread might grab the lock immediately which updates the next pointer of the mutex. fetch_robust_entry over the next pointer might therefore branch into the robust mutex list of a different thread. This can cause two problems: 1) some mutexes held by the dead thread are not getting freed and 2) some mutexs held by a different thread are freed. The next point need to be read before calling handle_futex_death. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-01VT ioctl race fixSamuel Ortiz
When calling the RELDISP VT ioctl, we are reading vt_newvt while the console workqueue could be messing with it (through change_console()). We fix this race by taking the console semaphore before reading vt_newvt. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-01Fix SMP poweroff hangsMark Lord
We need to disable all CPUs other than the boot CPU (usually 0) before attempting to power-off modern SMP machines. This fixes the hang-on-poweroff issue on my MythTV SMP box, and also on Thomas Gleixner's new toybox. Signed-off-by: Mark Lord <mlord@pobox.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-01hugetlb: fix clear_user_highpage argumentsRalf Baechle
The virtual address space argument of clear_user_highpage is supposed to be the virtual address where the page being cleared will eventually be mapped. This allows architectures with virtually indexed caches a few clever tricks. That sort of trick falls over in painful ways if the virtual address argument is wrong. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-01Add /dev/oldmem to devices.txt documentationDave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <device@lanana.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-01[MIPS] vmlinux.lds.S: Handle note sectionsMaciej W. Rozycki
Store any note sections after the exception tables like the other architectures do. This is required for .note.gnu.build-id emitted from binutils 2.18 onwards if nothing else. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-01[MIPS] Fix value of O_TRUNCRalf Baechle
A "cleanup" almost two years ago deleted the old definition from <asm/fcntl.h>, so asm-generic/fcntl.h defaulted it to the the same value as FASYNC ... which happened to be the wrong thing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-30[PATCH] libertas: build problems when partially modularRandy Dunlap
Fix missing symbols in libertas USB driver when it is modular and rest of libertas is built-in. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-30[ARM] Resolve PCI section warningsRussell King
Fix the following (valid) section warnings: WARNING: vmlinux.o(.text+0xf7b5c): Section mismatch: reference to .init.text:pcibios_fixup_bus (between 'pci_scan_child_bus' and 'pci_scan_bridge') WARNING: vmlinux.o(.text+0xfc5f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_map_rom' and 'pci_unmap_rom') WARNING: vmlinux.o(.text+0xfc824): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_update_resource' and 'pci_claim_resource') WARNING: vmlinux.o(.text+0xfd6d8): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd730): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd788): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd7e0): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfe024): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') WARNING: vmlinux.o(.text+0xfe0f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') WARNING: vmlinux.o(.text+0xfe17c): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-30V4L/DVB (6052): ivtv: fix udma yuv bugIan Armstrong
Using udma yuv causes the driver becomes locked into that mode. This prevents use of the mpeg decoder & non-udma yuv output. This patch clears the operating mode when the device is closed. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-29fix console change race exposed by CFSJan Lübbe
The new behaviour of CFS exposes a race which occurs if a switch is requested when vt_mode.mode is VT_PROCESS. The process with vc->vt_pid is signaled before vc->vt_newvt is set. This causes the switch to fail when triggered by the monitoing process because the target is still -1. [ If the signal sending fails, the subsequent "reset_vc(vc)" will then reset vt_newvt to -1, so this works for that case too. - Linus ] Signed-off-by: Jan Lübbe <jluebbe@lasnet.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-29Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: mv643xx_eth: Check ETH_INT_CAUSE_STATE bit
2007-09-29i386: remove bogus comment about memory barrierNick Piggin
The comment being removed by this patch is incorrect and misleading. In the following situation: 1. load ... 2. store 1 -> X 3. wmb 4. rmb 5. load a <- Y 6. store ... 4 will only ensure ordering of 1 with 5. 3 will only ensure ordering of 2 with 6. Further, a CPU with strictly in-order stores will still only provide that 2 and 6 are ordered (effectively, it is the same as a weakly ordered CPU with wmb after every store). In all cases, 5 may still be executed before 2 is visible to other CPUs! The additional piece of the puzzle that mb() provides is the store/load ordering, which fundamentally cannot be achieved with any combination of rmb()s and wmb()s. This can be an unexpected result if one expected any sort of global ordering guarantee to barriers (eg. that the barriers themselves are sequentially consistent with other types of barriers). However sfence or lfence barriers need only provide an ordering partial ordering of memory operations -- Consider that wmb may be implemented as nothing more than inserting a special barrier entry in the store queue, or, in the case of x86, it can be a noop as the store queue is in order. And an rmb may be implemented as a directive to prevent subsequent loads only so long as their are no previous outstanding loads (while there could be stores still in store queues). I can actually see the occasional load/store being reordered around lfence on my core2. That doesn't prove my above assertions, but it does show the comment is wrong (unless my program is -- can send it out by request). So: mb() and smp_mb() always have and always will require a full mfence or lock prefixed instruction on x86. And we should remove this comment. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Paul McKenney <paulmck@us.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-29mv643xx_eth: Check ETH_INT_CAUSE_STATE bitDale Farnsworth
Commit 468d09f8946d40228c56de26fe4874b2f98067ed masked the "state" interrupt (bit 20 of the cause register). This results in Radstone's PPC7D repeatedly re-entering the interrupt routine, locking up the board. The following patch returns the required handling for this interrupt. Signed-off-by: Martyn Welch <martyn.welch@radstone.co.uk> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-28Fix bogus PCI quirk for e100Benjamin Herrenschmidt
Linas reported me that some machines were crashing at boot in quirk_e100_interrupt. It appears that this quirk is doing an ioremap directly on a PCI BAR value, which isn't legal and will cause all sorts of bad things to happen on architectures where PCI BARs don't directly match processor bus addresses. This fixes it by using the proper PCI resources instead which is possible since the quirk has been moved by a previous commit to happen late enough for that. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-28Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TCP]: Fix MD5 signature handling on big-endian. [NET]: Zero length write() on socket should not simply return 0.
2007-09-28Input: xpad - fix dependancy on LEDS classDmitry Torokhov
Input: xpad - fix dependancy on LEDS class The driver can not be built-in when LEDS class is a module. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-28NFS: Fix an Oops in encode_lookup()Trond Myklebust
It doesn't look as if the NFS file name limit is being initialised correctly in the struct nfs_server. Make sure that we limit whatever is being set in nfs_probe_fsinfo() and nfs_init_server(). Also ensure that readdirplus and nfs4_path_walk respect our file name limits. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-28Merge branch 'for-2.6.23' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc * 'for-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: [POWERPC] mpc8349emitx.dts: Setup USB-DR for peripheral mode. [POWERPC] Fix mpc834x USB-MPH configuration. [POWERPC] Fix cpm_uart driver for cpm1 machines [PPC] Fix cpm_dpram_addr returning phys mem instead of virt mem [POWERPC] Fix copy'n'paste typo in commproc.c
2007-09-28Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: e1000: Add device IDs of blade version of the 82571 quad port sky2: fix transmit state on resume sky2: FE+ vlan workaround sky2: sky2 FE+ receive status workaround
2007-09-28[TCP]: Fix MD5 signature handling on big-endian.David S. Miller
Based upon a report and initial patch by Peter Lieven. tcp4_md5sig_key and tcp6_md5sig_key need to start with the exact same members as tcp_md5sig_key. Because they are both cast to that type by tcp_v{4,6}_md5_do_lookup(). Unfortunately tcp{4,6}_md5sig_key use a u16 for the key length instead of a u8, which is what tcp_md5sig_key uses. This just so happens to work by accident on little-endian, but on big-endian it doesn't. Instead of casting, just place tcp_md5sig_key as the first member of the address-family specific structures, adjust the access sites, and kill off the ugly casts. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-28Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix fallocate on o32 binary compat ABI [MIPS] Fix CONFIG_BUILD_ELF64 kernels with symbols in CKSEG0. [MIPS] IP32: Fix initialization of UART base addresses.
2007-09-28[MIPS] Fix fallocate on o32 binary compat ABIKyle McMartin
MIPS was mistakenly forgetting to use the fallocate compat wrapper, which I noticed while cleaning up all the duplicate fallocate wrappers. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-28[MIPS] Fix CONFIG_BUILD_ELF64 kernels with symbols in CKSEG0.Ralf Baechle
The __pa() for those did assume that all symbols have XKPHYS values and the math fails for any other address range. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-28[MIPS] IP32: Fix initialization of UART base addresses.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: [x86 setup] Correct the SMAP check for INT 0x15, AX=0xe820
2007-09-28[x86 setup] Correct the SMAP check for INT 0x15, AX=0xe820H. Peter Anvin
The e820 probe code was checking %edx, not %eax, for the SMAP signature on return. This worked on *almost* all systems, since %edx still contained SMAP from the call on entry, but on a handful of systems it failed -- plus, we would have missed real mismatches. The error output is "=d" to make sure gcc knows %edx is clobbered here. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-09-28[POWERPC] mpc8349emitx.dts: Setup USB-DR for peripheral mode.jacmet@sunsite.dk
Setup dr_mode for USB-DR to peripheral as the default (host mode) doesn't make much sense for the mini-AB connector on the ITX board. Peripheral mode is preferable to OTG as the fsl_usb2_udc.c driver doesn't yet properly support it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-28[POWERPC] Fix mpc834x USB-MPH configuration.jacmet@sunsite.dk
mpc834x USB-MPH configuration got broken by commit 6f442560021aecf08658e26ed9a37e6928ef0fa1. The selection bits in SICRL should be cleared rather than set to configure the USB MUXes for the MPH. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-28[POWERPC] Fix cpm_uart driver for cpm1 machinesJochen Friedrich
in cpm_uart_cpm1.h, DPRAM_BASE is assigned an address derived from cpmp. On ARC=ppc, this is a physical address with 1:1 DMA mapping which can't be used for arithmetric compare operations with virtual addresses returned by cpm_dpram_addr. This patch changes the assignment to use cpm_dpram_addr as well, like in cpm_uart_cpm2.h. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-28[PPC] Fix cpm_dpram_addr returning phys mem instead of virt memJochen Friedrich
cpm_dpram_addr returns physical memory of the DP RAM instead of iomapped virtual memory. As there usually is a 1:1 MMU map of the IMMR area, this is often not noticed. However, cpm_dpram_phys assumes this iomapped virtual memory and returns garbage on the 1:1 mapped memory causing CPM1 uart console to fail. This patch fixes the problem (copied from the powerpc tree). Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-28[POWERPC] Fix copy'n'paste typo in commproc.cJochen Friedrich
The powerpc version of commproc.c exports cpm_dpram_addr twice and cpm_dpram_phys not at all due to a typo. This patch fixes this problem. CC arch/powerpc/sysdev/commproc.o arch/powerpc/sysdev/commproc.c:398: error: redefinition of '__kcrctab_cpm_dpram_addr' arch/powerpc/sysdev/commproc.c:392: error: previous definition of '__kcrctab_cpm_dpram_addr' was here arch/powerpc/sysdev/commproc.c:398: error: redefinition of '__kstrtab_cpm_dpram_addr' arch/powerpc/sysdev/commproc.c:392: error: previous definition of '__kstrtab_cpm_dpram_addr' was here arch/powerpc/sysdev/commproc.c:398: error: redefinition of '__ksymtab_cpm_dpram_addr' arch/powerpc/sysdev/commproc.c:392: error: previous definition of '__ksymtab_cpm_dpram_addr' was here make[1]: *** [arch/powerpc/sysdev/commproc.o] Error 1 make: *** [arch/powerpc/sysdev] Error 2 Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-27e1000: Add device IDs of blade version of the 82571 quad portAuke Kok
This blade-specific board form factor is identical to the 82571EB board. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-27sky2: fix transmit state on resumeStephen Hemminger
This should fix http://bugzilla.kernel.org/show_bug.cgi?id=8667 After resume, driver has reset the chip so the current state of transmit checksum offload state machine and DMA state machine will be undefined. The fix is to set the state so that first Tx will set MSS and offset values. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-27sky2: FE+ vlan workaroundStephen Hemminger
The FE+ workaround means the driver can no longer trust the status register to indicate VLAN tagged frames. The fix for this is to just disable VLAN acceleration for that chip version. Tested and works fine. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-27sky2: sky2 FE+ receive status workaroundStephen Hemminger
The Yukon FE+ chip appears to have a hardware glitch that causes bogus receive status values to be posted. The data in the packet is good, but the status value is random garbage. As a temporary workaround until the problem is better understood, implement the workaround the vendor driver used of ignoring the status value on this chip. Since this means trusting dodgy hardware values; add additional checking of the receive packet length. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-27Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix CONFIG_BUILD_ELF64 kernels with symbols in CKSEG0. [MIPS] IP32: Fix initialization of UART base addresses.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 01:14:38 +0000