summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-15drm/amd/powerplay: implement a common set dpm table API for smu V11Evan Quan
Maximum the code sharing around smu V11. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: add more members for dpm tableEvan Quan
These members can help to cache the clock frequencies for all dpm levels. Then simplifying the code for dpm level switching is possible. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amdgpu: add module parameter choose reset modeWenhui Sheng
Default value is auto, doesn't change original reset method logic. v2: change to use parameter reset_method v3: add warn msg if specified mode isn't supported Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amdgpu: enable mode1 resetWenhui Sheng
For sienna cichlid, add mode1 reset path for sGPU. v2: hiding MP0/MP1 mode1 reset under AMD_RESET_METHOD_MODE1 v3: split emergency restart logic to a new patch Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amdgpu: RAS emergency restart logic refineWenhui Sheng
If we are in RAS triggered situation and BACO isn't support, emergency restart is needed, and this code is only needed for some specific cases(vega20 with given smu fw version). After we add smu mode1 reset for sienna cichlid, we need to share AMD_RESET_METHOD_MODE1 with psp mode1 reset, so in amdgpu_device_gpu_recover, we need differentiate which mode1 reset we are using, then decide if it's a full reset and then decide if emergency restart is needed, the logic will become much more complex. After discussion with Hawking, move emergency restart logic to an independent function. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: add SMU mode1 resetWenhui Sheng
From PM FW 58.26.0 for sienna cichlid, SMU mode1 reset is support, driver sends PPSMC_MSG_Mode1Reset message to PM FW could trigger this reset. v2: add mode1 reset dpm interface v3: change maro name Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amdkfd: fix kernel-doc and cleanupRajneesh Bhardwaj
- fix some styling issues - fixes for kernel-doc type Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: remove an unnecessary NULL checkDan Carpenter
The "stream" pointer can't be NULL and it's dereferenced on the line before so the check doesn't make sense. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amdgpu/sdma5: fix wptr overwritten in ->get_wptr()Xiaojie Yuan
"u64 *wptr" points to the the wptr value in write back buffer and "*wptr = (*wptr) >> 2;" results in the value being overwritten each time when ->get_wptr() is called. umr uses /sys/kernel/debug/dri/0/amdgpu_ring_sdma0 to get rptr/wptr and decode ring content and it is affected by this issue. fix and simplify the logic similar as sdma_v4_0_ring_get_wptr(). v2: fix for sdma5.2 as well Suggested-by: Le Ma <le.ma@amd.com> Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amdgpu: use ARRAY_SIZE() to add amdgpu debugfs filesXiaojie Yuan
to easily add new debugfs file w/o changing the hardcoded list count. Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amdgpu/powerplay: Modify SMC message name for setting power profile modechen gong
I consulted Cai Land(Chuntian.Cai@amd.com), he told me corresponding smc message name to fSMC_MSG_SetWorkloadMask() is "PPSMC_MSG_ActiveProcessNotify" in firmware code of Renoir. Strange though it may seem, but it's a fact. Signed-off-by: chen gong <curry.gong@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: Allow for vblank enabled with no active planesNicholas Kazlauskas
[Why] CRC capture doesn't work when the active plane count is 0 since we currently tie both vblank and pageflip interrupts to active_plane_count greater than 0. [How] The frontend is what generates the vblank interrupts while the backend is what generates pageflip interrupts. Both have a requirement for the CRTC to be active, so control the overall interrupt state based on that instead. Pageflip interrupts need to be enabled based on active plane count, but we actually rely on power gating to take care of disabling the interrupt for us on pipes that can be power gated. For pipes that can't be power gated it's still fine to leave it enabled since the interrupt only triggers after the address has been written to that particular pipe - which we won't be doing without an active plane. The issue we had before with this setup was that we couldn't force the state back on. We were essentially manipulating the refcount to enable or disable as needed in a two pass approach. However, there is a function that solves this problem more elegantly: amdgpu_irq_update() will unconditionally call the set based on what it thinks the current enablement state is. This leaves two future TODO items for our IRQ handling: - Disabling IRQs in commit tail instead of atomic commit - Mapping the pageflip interrupt to VUPDATE or something that's tied to the frontend instead of the backend since the mapping to CRTC is not correct Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: Add missing DCN30 registers and fields for OTG_CRC_CNTL2Nicholas Kazlauskas
[Why] When enabling the debugfs for CRC capture we hit assertions caused by register address and field masks and shifts missing. [How] We want these registers programmed, so add in the SRI/SF entries for this register. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: handle failed allocation during stream constructionJosip Pavic
[Why] Failing to allocate a transfer function during stream construction leads to a null pointer dereference [How] Handle the failed allocation by failing the stream construction Cc: stable@vger.kernel.org Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: Reuse parsing code of debugfs write bufferMikita Lipski
[why] Move code for parsing debugfs input into an array of int parameters by specifying the max number of expected parameters Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: 3.2.94Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: [FW Promotion] Release 0.0.24Anthony Koo
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: fix dcn3 p_state_change_support validation (v2)Dmytro Laktyushkin
Our validation is a known mess with actual validation mixed with topology configuration. This change makes sure topolgical validation is completed before any topology changes are made so we do not run into issues where we merge and split a pipe over the course of a single call. v2: Squash in compilation fix Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: p-state warning occurs while changing resolution from 120hz ↵hersen wu
to 60hz [Why] new calculated dispclk, dppclk are stored in context->bw_ctx.bw.dcn.clk.dispclk_khz, dppclk_khz. Current dispclk, dppclk are from dc->clk_mgr->clks.dispclk_khz. dcn_validate_bandwidth compute new dispclk, dppclk. dispclk will put in use after optimize_bandwidth when ramp_up_dispclk_with_dpp is called. There are two places for dppclk be put in use. One location is the same as the location as dispclk. Another is within update_dchubp_dpp which happens between pre_bandwidth and optimize_bandwidth. dppclk updated within update_dchubp_dpp will cause new clock values of dispclk and dppclk not be in use at the same time. when clocks are decreased, this may cause dppclk is lower than current configuration and let pipe stuck. for example, eDP + external dp, change resolution of DP from 1920x1080x144hz to 1280x960x60hz. before change: dispclk = 337889 dppclk = 337889 change mode, dcn_validate_bandwidth calculate dispclk = 143122 dppclk = 143122 update_dchubp_dpp be executed before dispclk be updated, dispclk = 337889, but dppclk use new value dispclk /2 = 168944. this will cause pipe pstate warning issue. [How] between pre_bandwidth and optimize_bandwidth, while dispclk is going to be decreased, keep dppclk = dispclk Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: OLED panel backlight adjust not work with external display ↵hersen wu
connected [Why] amdgpu_dm->backlight_caps is for single eDP only. the caps are upddated for very connector. Real eDP caps will be overwritten by other external display. For OLED panel, caps->aux_support is set to 1 for OLED pnael. after external connected, caps+.aux_support is set to 0. This causes OLED backlight adjustment not work. [How] within update_conector_ext_caps, backlight caps will be updated only for eDP connector. Cc: stable@vger.kernel.org Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: reduce sr_xxx_time by 3 us when ppt disableChiawen Huang
[Why] when ppt disabled, the watermark doesn't get fine tune causing underflow. [How] It is a temporary solution to reduce sr_xxx_time by 3 us when ppt disable. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: Power down hardware if set mode is not called before timeoutSung Lee
[WHY] In headless systems, if set mode is not called, hardware will not be powered down on boot, causing HW/SW discrepancies. Powering down hardware on boot will ensure SW state is accurate. [HOW] Set a timer callback on boot for 10 seconds. If set mode is not called within that time, power down hardware. Otherwise, do not power down. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: update dml varDmytro Laktyushkin
Update *DynamicMetadata variables for providing more flexibility. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amdgpu/powerplay: Target power profile mode should be the second ↵chen gong
parameter of renoir_set_power_profile_mode A small mistake Signed-off-by: chen gong <curry.gong@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu/display: create fake mst encoders ahead of time (v4)Alex Deucher
Prevents a warning in the MST create connector case. v2: create global fake encoders rather per connector fake encoders to avoid running out of encoder indices. v3: use the actual number of crtcs on the asic rather than the max to conserve encoders. v4: v3 plus missing hunk I forgot to git add. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1108 Fixes: c6385e503aeaf9 ("drm/amdgpu: drop legacy drm load and unload callbacks") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: fix spelling mistake "Falied" -> "Failed"Colin Ian King
There is a spelling mistake in a DRM_ERROR error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: fix preemption unit testJack Xiao
Remove signaled jobs from job list and ensure the job was indeed preempted. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu/gfx10: fix race condition for kiqJack Xiao
During preemption test for gfx10, it uses kiq to trigger gfx preemption, which would result in race condition with flushing TLB for kiq. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: minor cleanup of phase1 suspend codeNirmoy Das
Cleanup of phase1 suspend code to reduce unnecessary indentation. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: put dpm frequency setting common code in smu_v11_0.cEvan Quan
As designed the common code shared among all smu v11 ASCIs go to smu_v11_0.c. This helps to maintain clear code layers. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: revise calling chain on retrieving frequency rangeEvan Quan
This helps to maintain clear code layers and drop unnecessary parameter. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: revise calling chain on setting soft limitEvan Quan
This helps to maintain clear code layers and drop unnecessary parameter. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: put setting hard limit common code in smu_v11_0.cEvan Quan
As designed the common code shared among all smu v11 ASCIs go to smu_v11_0.c. This helps to maintain clear code layers. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: drop unused code and wrapper around clock retrievingEvan Quan
Clean code by dropping unnecessary ones. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: unshare the code for retrieving current clock frequencyEvan Quan
By moving them into asic specific file. Since they are really ASIC specific. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: bypass wrapper on retrieving current clock frequencyEvan Quan
By calling the target API(asic specific) directly. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: drop unnecessary wrappers around clock retrievingEvan Quan
By calling the target APIs directly. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: update driver if file for sienna_cichlidLikun Gao
Update sienna_cichlid driver if header and related files. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: correct the .get_workload_type() pointerEvan Quan
This seemed a typo. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10Revert "drm/amd/display: add mechanism to skip DCN init"Changfeng
To avoid s3 faild at the first cycle on renoir platform, it needs to revert this patch: drm/amd/display: add mechanism to skip DCN init Signed-off-by: changfeng <Changfeng.Zhu@amd.com> Ackedy-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/display: Fix CSC remap matrix not being applied on dcn30Nicholas Kazlauskas
[Why] DCN3 has two gamut remap matrices. When using CSC adjustment the CM remap is set to bypass and MPCC remap is used. However to bypass CM some state in the context is modified and not restored correctly resulting in subsequent calls to disable MPCC remap as well. [How] Fix logic for save/restore of remap enable flag when programming MPCC remap matrix. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/display: Use VUPDATE_NO_LOCK instead of VUPDATE for dcn30Nicholas Kazlauskas
[Why] Soft hangs occur when FreeSync is engaged since we utilize VUPDATE (which doesn't fire when holding the pipe lock) to send back vblank events when FreeSync is active. [How] The alternative (working) interrupt source for this mechanism is VUPDATE_NO_LOCK. We already use this all other DCN revisions so align dcn30 with those as well. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: enable gpu recovery for sienna cichlidLikun Gao
Enable gpu recovery for sienna cichlid by default to trigger gpu recovery once needed. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: remove unnecessary logic of ASIC checkLikun Gao
Remove some unused ASIC check logic. Remove some definition of amdgpu_device which only used by the removed ASIC check logic.(V2) Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: don't do soft recovery if gpu_recovery=0Marek Olšák
It's impossible to debug shader hangs with soft recovery. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/radeon: fix double freeTom Rix
clang static analysis flags this error drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc] kfree(rdev->pm.dpm.ps[i].ps_priv); ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc] kfree(rdev->pm.dpm.ps); ^~~~~~~~~~~~~~~~~~~~~~ problem is reported in ci_dpm_fini, with these code blocks. for (i = 0; i < rdev->pm.dpm.num_ps; i++) { kfree(rdev->pm.dpm.ps[i].ps_priv); } kfree(rdev->pm.dpm.ps); The first free happens in ci_parse_power_table where it cleans up locally on a failure. ci_dpm_fini also does a cleanup. ret = ci_parse_power_table(rdev); if (ret) { ci_dpm_fini(rdev); return ret; } So remove the cleanup in ci_parse_power_table and move the num_ps calculation to inside the loop so ci_dpm_fini will know how many array elements to free. Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08gpu/drm: Remove debug info about CPU addressTiezhu Yang
When I update the latest kernel, I see the following "____ptrval____" boot messages. [ 1.872600] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000048000c00 and cpu addr 0x(____ptrval____) [ 1.879095] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x0000000040056038 and cpu addr 0x(____ptrval____) Both radeon_fence_driver_start_ring() and amdgpu_fence_driver_start_ring() have the similar issue, there exists the following two methods to solve it: (1) Use "%pK" instead of "%p" so that the CPU address can be printed when the kptr_restrict sysctl is set to 1. (2) Just completely drop the CPU address suggested by Christian, because the CPU address was useful in the past, but isn't any more. We now have a debugfs file to read the current fence values. Since the CPU address is not much useful, just remove the debug info about CPU address. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Add missing CW4 programming for DCN30Nicholas Kazlauskas
[Why] To support inbox1 in CW4 we need to actually program CW4 instead of region 4 for newer firmware. This is done correctly on DCN20/DCN21 but this code wasn't added to DCN30. [How] Copy over the missing code. It doesn't need address translation since DCN30 uses virtual addressing. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in mmhub v9.4Huang Rui
This patch updates to use register distance member instead of hardcode in mmhub v9.4. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in mmhub v2Huang Rui
This patch updates to use register distance member instead of hardcode in mmhub v2. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 06:55:04 +0000