summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-31ARM: gic: fix irq_alloc_descs handling for sparse irqRob Herring
Commit "ARM: gic: add irq_domain support" (b49b6ff) breaks SPARSE_IRQ on platforms with GIC. When SPARSE_IRQ is enabled, all NR_IRQS or mach_desc->nr_irqs will be allocated by arch_probe_nr_irqs(). This caused irq_alloc_descs to allocate irq_descs after the pre-allocated space. Make irq_alloc_descs search for an exact irq range and assume it has been pre-allocated on failure. For DT probing dynamic allocation is used. DT enabled platforms should set their nr_irqs to NR_IRQ_LEGACY and have all irq_chips allocate their irq_descs with irq_alloc_descs if SPARSE_IRQ is enabled. gic_init irq_start param is changed to be signed with negative meaning do dynamic Linux irq assigment. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-10-31ARM: gic: add OF based initializationRob Herring
This adds ARM gic interrupt controller initialization using device tree data. The initialization function is intended to be called by of_irq_init function like this: const static struct of_device_id irq_match[] = { { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, {} }; static void __init init_irqs(void) { of_irq_init(irq_match); } Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31ARM: gic: add irq_domain supportRob Herring
Convert the gic interrupt controller to use irq domains in preparation for device-tree binding and MULTI_IRQ. This allows for translation between GIC interrupt IDs and Linux irq numbers. The meaning of irq_offset has changed. It now is just the number of skipped GIC interrupt IDs for the controller. It will be 16 for primary GIC and 32 for secondary GICs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31irq: support domains with non-zero hwirq baseRob Herring
Interrupt controllers can have non-zero starting value for h/w irq numbers. Adding support in irq_domain allows the domain hwirq numbering to match the interrupt controllers' numbering. As this makes looping over irqs for a domain more complicated, add loop iterators to iterate over all hwirqs and irqs for a domain. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-10-31of/irq: introduce of_irq_initRob Herring
of_irq_init will scan the devicetree for matching interrupt controller nodes. Then it calls an initialization function for each found controller in the proper order with parent nodes initialized before child nodes. Based on initial pseudo code from Grant Likely. Changes in v4: - Drop unnecessary empty list check - Be more verbose on errors - Simplify "if (!desc) WARN_ON(1)" to "if (WARN_ON(!desc))" Changes in v3: - add missing kfree's found by Jamie - Implement Grant's comments to simplify the init loop - fix function comments Changes in v2: - Complete re-write of list searching code from Grant Likely Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-24Merge remote-tracking branch 'rmk/devel-stable' into HEADRob Herring
2011-10-23Merge branch 'ppi-irq-core-for-rmk' of ↵Russell King
git://github.com/mzyngier/arm-platforms into devel-stable
2011-10-23ARM: gic, local timers: use the request_percpu_irq() interfaceMarc Zyngier
This patch remove the hardcoded link between local timers and PPIs, and convert the PPI users (TWD, MCT and MSM timers) to the new *_percpu_irq interface. Also some collateral cleanup (local_timer_ack() is gone, and the interrupt handler is strictly private to each driver). PPIs are now useable for more than just the local timers. Additional testing by David Brown (msm8250 and msm8660) and Shawn Guo (imx6q). Cc: David Brown <davidb@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-10-23ARM: gic: consolidate PPI handlingMarc Zyngier
PPI handling is a bit of an odd beast. It uses its own low level handling code and is hardwired to the local timers (hence lacking a registration interface). Instead, switch the low handling to the normal SPI handling code. PPIs are handled by the handle_percpu_devid_irq flow. This also allows the removal of some duplicated code. Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-10-23Merge commit '32cffdd' into ppi-irq-core-for-rmkMarc Zyngier
2011-10-20ARM: smp: fix clipping of number of CPUsRussell King
Rather than clipping the number of CPUs using the compile-time NR_CPUS constant, use the runtime nr_cpu_ids value instead. This allows the nr_cpus command line option to work as expected. Cc: <stable@kernel.org> Reported-by: Mark Salter <msalter@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-18Merge branch 'mach_memory_h' of git://git.linaro.org/people/nico/linux into ↵Russell King
devel-stable
2011-10-17ARM: 7115/4: move __exception and friends to asm/exception.hJamie Iles
The definition of __exception_irq_entry for CONFIG_FUNCTION_GRAPH_TRACER=y needs linux/ftrace.h, but this creates a circular dependency with it's current home in asm/system.h. Create asm/exception.h and update all current users. v4: - rebase to rmk/for-next v3: - remove redundant includes of linux/ftrace.h v2: - document the usage restricitions of __exception* Cc: Zoltan Devai <zdevai@gmail.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7124/1: smp: Add a localtimer handler callable from C codeShawn Guo
In order to be able to handle localtimer directly from C code instead of assembly code, introduce handle_local_timer(), which is modeled after handle_IRQ(). Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7123/1: smp: Add an IPI handler callable from C codeShawn Guo
In order to be able to handle IPI directly from C code instead of assembly code, introduce handle_IPI(), which is modeled after handle_IRQ(). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7100/1: smp_scu: remove __init annotation from scu_enable()Shawn Guo
When Cortex-A9 MPCore resumes from Dormant or Shutdown modes, SCU needs to be re-enabled. This patch removes __init annotation from function scu_enable(), so that platform resume procedure can call it to re-enable SCU. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7061/1: gic: convert logical CPU numbers into physical numbersWill Deacon
The GIC driver must convert logical CPU numbers passed in from Linux into physical CPU numbers that are understood by the hardware. This patch uses the new cpu_logical_map macro for performing the conversion inside the GIC driver. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7060/1: smp: populate logical CPU mapping during bootWill Deacon
To allow booting Linux on a CPU with physical ID != 0, we need to provide a mapping from the logical CPU number to the physical CPU number. This patch adds such a mapping and populates it during boot. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7011/1: Add ARM cpu topology definitionVincent Guittot
The affinity between ARM processors is defined in the MPIDR register. We can identify which processors are in the same cluster, and which ones have performance interdependency. We can define the cpu topology of ARM platform, that is then used by sched_mc and sched_smt. The default state of sched_mc and sched_smt config is disable. When enabled, the behavior of the scheduler can be modified with sched_mc_power_savings and sched_smt_power_savings sysfs interfaces. Changes since v4 : * Remove unnecessary parentheses and blank lines Changes since v3 : * Update the format of printk message * Remove blank line Changes since v2 : * Update the commit message and some comments Changes since v1 : * Update the commit message * Add read_cpuid_mpidr in arch/arm/include/asm/cputype.h * Modify header of arch/arm/kernel/topology.c * Modify tests and manipulation of MPIDR's bitfields * Modify the place and dependancy of the config * Modify Noop functions Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-13ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_HNicolas Pitre
Given that we want the default to not have any <mach/memory.h> and given that there are now fewer cases where it is still provided than the cases where it is not at this point, this makes sense to invert the logic and just identify the exception cases. The word "need" instead of "have" was chosen to construct the config symbol so not to suggest that having a mach/memory.h file is actually a feature that one should aim for. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-s5p64x0: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-s3c64xx: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: plat-mxc: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-prima2: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-zynq: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-bcmring: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-davinci: remove mach/memory.hNicolas Pitre
Move some DDR2 related defines into a private <mach/ddr2.h> beforehand. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-pxa: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-ixp4xx: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-h720x: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-vt8500: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-s5pc100: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-tegra: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: plat-tcc: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-mmp: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-cns3xxx: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-nuc93x: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-mxs: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: spear: remove mach/memory.h and plat/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-msm: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-gemini: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-lpc32xx: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-netx: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-versatile: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-ux500: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-nomadik: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-iop32x: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-pnx4008: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-w90x900: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-10-13ARM: mach-vexpress: remove mach/memory.hNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 19:15:36 +0000