summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-02-28iop-adma: redundant/wrong tests in iop_*_count()?Roel Kluin
When we reach the loop, len is at least 1, we only stay in the loop when len is at least MAX_BYTE_COUNT + 1, MAX_BYTE_COUNT is subtracted in each iteration. So when we leave the loop, or didn't take it, len is at least 1. Testing whether len is non-zero appears redundant. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-28dmatest: fix handling of an even number of xor_sourcesDan Williams
Just like commit ac5d73fc, we need to be careful to use 'src_cnt' as it contains the fixed up number of xor sources (forced odd) to meet dmatest's data verification scheme. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-28dmatest: correct raid6 PQ testAnatolij Gustschin
The number of PQ sources specified by module parameter "pq_sources" is always forced odd to fit into dmatest's destination verificaton scheme. But number of PQ sources and coefficients as passed to the driver's prep_dma_pq() is not adjusted accordingly. Fix it now to get correct PQ testing results in the case passed "pq_sources" parameter is even. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-28fsldma: Fix cookie issuesSteven J. Magnani
fsl_dma_update_completed_cookie() appears to calculate the last completed cookie incorrectly in the corner case where DMA on cookie 1 is in progress just following a cookie wrap. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Acked-by: Ira W. Snyder <iws@ovro.caltech.edu> [dan.j.williams@intel.com: fix an integer overflow warning with INT_MAX] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-28fsldma: Fix cookie issuesSteven J. Magnani
fsl_dma_tx_submit() only sets the cookie on the first descriptor of a transaction. It should set the cookie on all. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Acked-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02dma: cases IPU_PIX_FMT_BGRA32, BGR32 and ABGR32 are the same in ↵Roel Kluin
ipu_ch_param_set_size() In these cases the same statements are executed. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02dma: make Open Firmware device id constantMárton Németh
The match_table field of the struct of_device_id is constant in <linux/of_platform.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk [dan.j.williams@intel.com: resolved conflict with recent fsldma updates] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: major cleanups and fixesIra Snyder
Fix locking. Use two queues in the driver, one for pending transacions, and one for transactions which are actually running on the hardware. Call dma_run_dependencies() on descriptor cleanup so that the async_tx API works correctly. There are a number of places throughout the code where lists of descriptors are freed in a loop. Create functions to handle this, and use them instead of open-coding the loop each time. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: rename fsl_chan to chanIra Snyder
The name fsl_chan seems too long, so it has been shortened to chan. There are only a few places where the higher level "struct dma_chan *chan" name conflicts. These have been changed to "struct dma_chan *dchan" instead. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: simplify IRQ probing and handlingIra Snyder
The IRQ probing is needlessly complex. All off the 83xx device trees in arch/powerpc/boot/dts/ specify 5 interrupts per DMA controller: one for the controller, and one for each channel. These interrupts are all attached to the same IRQ line. This causes an interesting situation if two channels interrupt at the same time. The per-controller handler will handle the first channel, and the per-channel handler will handle the remaining channels. Instead of this mess, we fix the bug in the per-controller handler, and make it handle all channels that generated an interrupt. When a per-controller handler is specified in the device tree, we prefer to use the shared handler instead of the per-channel handler. The 85xx/86xx controllers do not have a per-controller interrupt, and instead use a per-channel interrupt. This behavior has not been changed. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: clean up the OF subsystem routinesIra Snyder
This fixes some errors in the cleanup paths of the OF subsystem, including missing checks for ioremap failing. Also, some variables were renamed for brevity. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: rename dest to dst for uniformityIra Snyder
Most functions in the standard library use "dst" as a parameter, rather than "dest". This renames all use of "dest" to "dst" to match the usual convention. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: rename struct fsl_dma_chan to struct fsldma_chanIra Snyder
This is the beginning of a cleanup which will change all instances of "fsl_dma" to "fsldma" to match the name of the driver itself. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: remove unused structure membersIra Snyder
Remove some unused members from the fsldma data structures. A few trivial uses of struct resource were converted to use the stack rather than keeping the memory allocated for the lifetime of the driver. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: reduce kernel text sizeIra Snyder
Some of the functions are written in a way where they use multiple reads and writes where a single read/write pair could suffice. This shrinks the kernel text size measurably, while making the functions easier to understand. add/remove: 0/0 grow/shrink: 1/4 up/down: 4/-196 (-192) function old new delta fsl_chan_set_request_count 120 124 +4 dma_halt 300 272 -28 fsl_chan_set_src_loop_size 208 156 -52 fsl_chan_set_dest_loop_size 208 156 -52 fsl_chan_xfer_ld_queue 500 436 -64 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-01-29Linux 2.6.33-rc6Linus Torvalds
2010-01-29mfd: Fix asic3 buildDmitry Artamonow
asic3 also needs tmio_core or otherwise will fail to build. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: update multi-touch protocol documentation Input: add the ABS_MT_PRESSURE event Input: winbond-cir - remove dmesg spam Input: lifebook - add another Lifebook DMI signature Input: ad7879 - support auxiliary GPIOs via gpiolib
2010-01-29mm: fix migratetype bug which slowed swappingHugh Dickins
After memory pressure has forced it to dip into the reserves, 2.6.32's 5f8dcc21211a3d4e3a7a5ca366b469fb88117f61 "page-allocator: split per-cpu list into one-list-per-migrate-type" has been returning MIGRATE_RESERVE pages to the MIGRATE_MOVABLE free_list: in some sense depleting reserves. Fix that in the most straightforward way (which, considering the overheads of alternative approaches, is Mel's preference): the right migratetype is already in page_private(page), but free_pcppages_bulk() wasn't using it. How did this bug show up? As a 20% slowdown in my tmpfs loop kbuild swapping tests, on PowerMac G5 with SLUB allocator. Bisecting to that commit was easy, but explaining the magnitude of the slowdown not easy. The same effect appears, but much less markedly, with SLAB, and even less markedly on other machines (the PowerMac divides into fewer zones than x86, I think that may be a factor). We guess that lumpy reclaim of short-lived high-order pages is implicated in some way, and probably this bug has been tickling a poor decision somewhere in page reclaim. But instrumentation hasn't told me much, I've run out of time and imagination to determine exactly what's going on, and shouldn't hold up the fix any longer: it's valid, and might even fix other misbehaviours. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: check total number of devices when removing missing Btrfs: check return value of open_bdev_exclusive properly Btrfs: do not mark the chunk as readonly if in degraded mode Btrfs: run orphan cleanup on default fs root Btrfs: fix a memory leak in btrfs_init_acl Btrfs: Use correct values when updating inode i_size on fallocate Btrfs: remove tree_search() in extent_map.c Btrfs: Add mount -o compress-force
2010-01-29sparc: TIF_ABI_PENDING bit removalDavid Miller
Here are the sparc bits to remove TIF_ABI_PENDING now that set_personality() is called at the appropriate place in exec. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-29x86: get rid of the insane TIF_ABI_PENDING bitH. Peter Anvin
Now that the previous commit made it possible to do the personality setting at the point of no return, we do just that for ELF binaries. And suddenly all the reasons for that insane TIF_ABI_PENDING bit go away, and we can just make SET_PERSONALITY() just do the obvious thing for a 32-bit compat process. Everything becomes much more straightforward this way. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-29Split 'flush_old_exec' into two functionsLinus Torvalds
'flush_old_exec()' is the point of no return when doing an execve(), and it is pretty badly misnamed. It doesn't just flush the old executable environment, it also starts up the new one. Which is very inconvenient for things like setting up the new personality, because we want the new personality to affect the starting of the new environment, but at the same time we do _not_ want the new personality to take effect if flushing the old one fails. As a result, the x86-64 '32-bit' personality is actually done using this insane "I'm going to change the ABI, but I haven't done it yet" bit (TIF_ABI_PENDING), with SET_PERSONALITY() not actually setting the personality, but just the "pending" bit, so that "flush_thread()" can do the actual personality magic. This patch in no way changes any of that insanity, but it does split the 'flush_old_exec()' function up into a preparatory part that can fail (still called flush_old_exec()), and a new part that will actually set up the new exec environment (setup_new_exec()). All callers are changed to trivially comply with the new world order. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-28Input: update multi-touch protocol documentationHenrik Rydberg
This patch documents a new ABS_MT parameter and adds further text to clarify some points around the MT protocol. Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com> Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com> Requested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28Input: add the ABS_MT_PRESSURE eventHenrik Rydberg
For pressure-based multi-touch devices, a direct way to send sensor intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE event to the MT protocol. Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com> Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com> Requested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28Input: winbond-cir - remove dmesg spamDavid Härdeman
I missed converting one dev_info call to deb_dbg before submitting the driver. Without this change, a message will be printed to dmesg for each button press if a RC6 remote is used. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: stable <stable@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: Fix failure exit in ipathfs fix oops in fs/9p late mount failure fix leak in romfs_fill_super() get rid of pointless checks after simple_pin_fs() Fix failure exits in bfs_fill_super() fix affs parse_options() Fix remount races with symlink handling in affs Fix a leak in affs_fill_super()
2010-01-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: remove IOH range fetching PCI: fix nested spinlock hang in aer_inject
2010-01-28Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Update mach-types [ARM] orion5x: D-link DNS-323 rev. B1 power-off [ARM] Orion5x: add GPIO LED and buttons for wrt350n v2 [ARM] pxa: fix irq suspend/resume for pxa25x [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus [ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot [ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two
2010-01-28[ARM] Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-28Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-01-28Btrfs: check total number of devices when removing missingJosef Bacik
If you have a disk failure in RAID1 and then add a new disk to the array, and then try to remove the missing volume, it will fail. The reason is the sanity check only looks at the total number of rw devices, which is just 2 because we have 2 good disks and 1 bad one. Instead check the total number of devices in the array to make sure we can actually remove the device. Tested this with a failed disk setup and with this test we can now run btrfs-vol -r missing /mount/point and it works fine. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: check return value of open_bdev_exclusive properlyJosef Bacik
Hit this problem while testing RAID1 failure stuff. open_bdev_exclusive returns ERR_PTR(), not NULL. So change the return value properly. This is important if you accidently specify a device that doesn't exist when trying to add a new device to an array, you will panic the box dereferencing bdev. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: do not mark the chunk as readonly if in degraded modeJosef Bacik
If a RAID setup has chunks that span multiple disks, and one of those disks has failed, btrfs_chunk_readonly will return 1 since one of the disks in that chunk's stripes is dead and therefore not writeable. So instead if we are in degraded mode, return 0 so we can go ahead and allocate stuff. Without this patch all of the block groups in a RAID1 setup will end up read-only, which will mean we can't add new disks to the array since we won't be able to make allocations. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: run orphan cleanup on default fs rootJosef Bacik
This patch revert's commit 6c090a11e1c403b727a6a8eff0b97d5fb9e95cb5 Since it introduces this problem where we can run orphan cleanup on a volume that can have orphan entries re-added. Instead of my original fix, Yan Zheng pointed out that we can just revert my original fix and then run the orphan cleanup in open_ctree after we look up the fs_root. I have tested this with all the tests that gave me problems and this patch fixes both problems. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: fix a memory leak in btrfs_init_aclYang Hongyang
In btrfs_init_acl() cloned acl is not released Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: Use correct values when updating inode i_size on fallocateAneesh Kumar K.V
commit f2bc9dd07e3424c4ec5f3949961fe053d47bc825 Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Date: Wed Jan 20 12:57:53 2010 +0530 Btrfs: Use correct values when updating inode i_size on fallocate Even though we allocate more, we should be updating inode i_size as per the arguments passed Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: remove tree_search() in extent_map.cMiao Xie
This patch removes tree_search() in extent_map.c because it is not called by anything. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: Add mount -o compress-forceChris Mason
The default btrfs mount -o compress mode will quickly back off compressing a file if it notices that compression does not reduce the size of the data being written. This can save considerable CPU because all future writes to the file go through uncompressed. But some files are both very large and have mixed data stored in them. In that case, we want to add the ability to always try compressing data before writing it. This commit adds mount -o compress-force. A later commit will add a new inode flag that does the same thing. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs MIPS: PowerTV: Streamline access to platform device registers MIPS: Fix vmlinuz build for 32bit-only math shells MIPS: Add support of LZO-compressed kernels
2010-01-28Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6Linus Torvalds
* 'for-linus' of git://git.infradead.org/ubi-2.6: UBI: fix volume creation input checking
2010-01-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix crashes with TSB43AB23 on 64bit systems firewire: core: fix use-after-free regression in FCP handler firewire: cdev: add_descriptor documentation fix firewire: core: add_descriptor size check
2010-01-28x86/PCI: remove IOH range fetchingJeff Garrett
Turned out to cause trouble on single IOH machines, and is superceded by _CRS on multi-IOH machines with production BIOSes. Signed-off-by: Jeff Garrett <jeff@jgarrett.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-28Input: lifebook - add another Lifebook DMI signatureJon Dodgson
There are many many ways one can capitalize "Lifebook B Series"... Signed-off-by: Jon Dodgson <crayzeejon@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQsDavid VomLehn
The MIPS processor is limited to 64 external interrupt sources. Using a greater number without IRQ sharing requires reading platform-specific registers. On such platforms, reading the IntCtl register to determine which interrupt corresponds to a timer interrupt will not work. On MIPSR2 systems there is a solution - the TI bit in the Cause register, specifically indicates that a timer interrupt has occured. This patch uses that bit to detect interrupts for MIPSR2 processors, which may be expected to work regardless of how the timer interrupt may be routed in the hardware. Signed-off-by: David VomLehn (dvomlehn@cisco.com) To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: PowerTV: Streamline access to platform device registersDavid VomLehn
Pre-compute addresses for the basic ASIC registers. This speeds up access and allows memory for unused configurations to be freed. In addition, uninitialized register addresses will be returned as NULL to catch bad usage quickly. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/806/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: Fix vmlinuz build for 32bit-only math shellsAlexander Clouter
POSIX requires $((<expression>)) arithmetic in sh only to have long arithmetic so on 32-bit sh binaries might do only 32-bit arithmetic but the arithmetic done in arch/mips/boot/compressed/Makefile needs 64-bit. I play with the AR7 platform, so VMLINUX_LOAD_ADDRESS is 0xffffffff94100000, and for an example 4MiB kernel VMLINUZ_LOAD_ADDRESS is made out to be: ---- alex@berk:~$ bash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' ffffffff94500000 alex@berk:~$ dash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' 80000000003fffff ---- The former is obviously correct whilst the later breaks things royally. Fortunately working with only the lower 32bit's works for both bash and dash: ---- $ bash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 $ dash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 ---- So, we can split the original 64bit string to two parts, and only calculate the low 32bit part, which is big enough (1GiB kernel sizes anyone?) for a normal Linux kernel image file, now, we calculate the VMLINUZ_LOAD_ADDRESS like this: 1. if present, append top 32bit of VMLINUX_LOAD_ADDRESS" as a prefix 2. get the sum of the low 32bit of VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE This patch fixes vmlinuz kernel builds on systems where only a 32bit-only math shell is available. Patch Changelog: Version 2 - simplified method by using 'expr' for 'substr' and making it work with dash once again Version 1 - Revert the removals of '-n "$(VMLINUX_SIZE)"' to avoid the error of "make clean" - Consider more cases of the VMLINUX_LOAD_ADDRESS Version 0 - initial release Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/861/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: Add support of LZO-compressed kernelsWu Zhangjin
The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Patchwork: http://patchwork.linux-mips.org/patch/857/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-27Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King
2010-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree [SCSI] zfcp: Set hardware timeout as requested by BSG request. [SCSI] zfcp: Introduce bsg_timeout callback. [SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout [SCSI] zfcp: add missing compat ptr conversion [SCSI] zfcp: Fix linebreak in hba trace [SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request [SCSI] qla2xxx: Update version number to 8.03.01-k10. [SCSI] fc-transport: Use packed modifier for fc_bsg_request structure. [SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment. [SCSI] qla2xxx: Correct FCP2 recovery handling. [SCSI] scsi_lib: Fix bug in completion of bidi commands [SCSI] mptsas: Fix issue with chain pools allocation on katmai [SCSI] aacraid: fix File System going into read-only mode [SCSI] lpfc: fix file permissions
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 13:32:07 +0000