summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-26mtd: pxa3xx_nand: rework flash detection and timing setupAntoine Ténart
Rework the pxa3xx_nand driver to allow using functions exported by the nand framework to detect the flash and the timings. Then setup the timings using the helpers previously added. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: pxa3xx_nand: add helpers to setup the timingsAntoine Ténart
Add helpers to setup the timings in the pxa3xx driver. These helpers allow to either make use of the nand framework nand_sdr_timings or the pxa3xx specific pxa3xx_nand_host, for compatibility reasons. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: pxa3xx_nand: fix some compile issues on non-ARM archesAntoine Ténart
Using readsl() result in a build error on i386. Fix this by using ioread32_rep() instead, to allow compile testing the pxa3xx nand driver on other architectures later. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-19mtd: lpc32xx_mlc: fix warnings caused by enabling unprepared clockVladimir Zapolskiy
If common clock framework is configured, the driver generates a warning, which is fixed by this change: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #206 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc32xx_nand_probe+0x208/0x248) [<>] (lpc32xx_nand_probe) from [<>] (platform_drv_probe+0x50/0xa0) [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408) [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94) [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98) [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28) [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248) [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8) [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64) [<>] (__platform_driver_register) from [<>] (lpc32xx_nand_driver_init+0x18/0x20) [<>] (lpc32xx_nand_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc) [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4) [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec) [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-19mtd: lpc32xx_slc: fix warnings caused by enabling unprepared clockVladimir Zapolskiy
If common clock framework is configured, the driver generates a warning, which is fixed by this change: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #201 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc32xx_nand_probe+0x290/0x568) [<>] (lpc32xx_nand_probe) from [<>] (platform_drv_probe+0x50/0xa0) [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408) [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94) [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98) [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28) [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248) [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8) [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64) [<>] (__platform_driver_register) from [<>] (lpc32xx_nand_driver_init+0x18/0x20) [<>] (lpc32xx_nand_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc) [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4) [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec) [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-19mtd: maps: rbtx4939-flash: fix compile errorBrian Norris
We got the syntax wrong here. Compile tested this time! Error: drivers/mtd/maps/rbtx4939-flash.c: In function 'rbtx4939_flash_probe': >> drivers/mtd/maps/rbtx4939-flash.c:99:11: error: request for member 'dev' in something not a structure or union info->mtd.dev.parent = &dev->dev; ^ Fixes: 9aa7e50276c1 ("mtd: maps: rbtx4939-flash: show parent device in sysfs") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Frans Klaver <fransklaver@gmail.com>
2015-10-19mtd: mtd-user: remove stdint.h includeMikko Rapeli
Kernel headers should use linux/types.h instead. Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-19mtd: mtdram: check offs and len in mtdram->eraseDongsheng Yang
We should prevent user to erasing mtd device with an unaligned offset or length. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-19mtd: pxa3xx_nand: switch to device PMBrian Norris
The old PM model is deprecated. This is equivalent. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-10-19mtd: pxa3xx_nand: don't duplicate MTD suspend/resumeBrian Norris
mtd_{suspend,resume}() get called from mtdcore in a class suspend/resume callback. We don't need to call them again here. In practice, this would actually work OK, as nand_base actually handles nesting OK -- it just might print warnings. Untested, but there are few (no?) users of PM for this driver AFAIK. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-10-19mtd: fsl-quadspi: Include <linux/sizes.h> to avoid build errorFabio Estevam
Building for x86 results in the following build errors: drivers/mtd/spi-nor/fsl-quadspi.c: In function 'fsl_qspi_init_lut': >> drivers/mtd/spi-nor/fsl-quadspi.c:355:21: error: 'SZ_16M' undeclared (first use in this function) if (q->nor_size <= SZ_16M) { ^ drivers/mtd/spi-nor/fsl-quadspi.c:355:21: note: each undeclared identifier is reported only once for each function it appears in drivers/mtd/spi-nor/fsl-quadspi.c: In function 'fsl_qspi_read': >> drivers/mtd/spi-nor/fsl-quadspi.c:208:27: error: 'SZ_4M' undeclared (first use in this function) #define QUADSPI_MIN_IOMAP SZ_4M ^ >> drivers/mtd/spi-nor/fsl-quadspi.c:845:25: note: in expansion of macro 'QUADSPI_MIN_IOMAP' q->memmap_len = len > QUADSPI_MIN_IOMAP ? len : QUADSPI_MIN_IOMAP; Explicitly include <linux/sizes.h> to fix the problem. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-19mtd: fsl-quadspi: allow building for other ARCHes with COMPILE_TESTBrian Norris
This driver doesn't actually need ARCH_MXC to compile. Relax the constraints. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Han xu <han.xu@freescale.com>
2015-10-19mtd: fsl-quadspi: fix printk() format warning for size_tBrian Norris
Seen when compile-testing on non-32-bit arch: CC drivers/mtd/spi-nor/fsl-quadspi.o drivers/mtd/spi-nor/fsl-quadspi.c: In function 'fsl_qspi_read': drivers/mtd/spi-nor/fsl-quadspi.c:873:2: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t' [-Wformat=] dev_dbg(q->dev, "cmd [%x],read from 0x%p, len:%d\n", ^ Also drop the '0x' prefixing to the '%p' formatter, since %p already knows how to format pointers appropriately. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Han xu <han.xu@freescale.com>
2015-10-19mtd: spi-nor: add DUAL_READ for w25q{32,64}dwBrian Norris
These flash support dual and quad read. Tested dual read on the 32 Mbit version. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: disable protection for Winbond flash at startupBrian Norris
In case the flash was locked at boot time. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: support lock/unlock/is_locked for WinbondBrian Norris
Many other flash share the same features as ST Micro. I've tested some Winbond flash, so add them. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: add mtd_is_locked() supportBrian Norris
This enables ioctl(MEMISLOCKED). Status can now be reported in the mtdinfo or flash_lock utilities found in mtd-utils. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: refactor block protection functionsBrian Norris
This code was a bit sloppy, would produce a lot of copy-and-paste, and did not always provide a sensible interface: * It didn't validate the length for LOCK and the offset for UNLOCK, so we were essentially discarding half of the user-supplied data and assuming what they wanted to lock/unlock * It didn't do very good error checking * It didn't make use of the fact that this operation works on power-of-two dimensions So, rewrite this to do proper bit arithmetic rather than a bunch of hard-coded condition tables. Now we have: * More comments on how this was derived * Notes on what is (and isn't) supported * A more exendible function, so we could add support for other protection ranges * More accurate locking - e.g., suppose the top quadrant is locked (75% to 100%); then in the following cases, case (a) will succeed but (b) will not (return -EINVAL): (a) user requests lock 3rd quadrant (50% to 75%) (b) user requests lock 3rd quadrant, minus a few blocks (e.g., 50% to 73%) Case (b) *should* fail, since we'd have to lock blocks that weren't requested. But the old implementation didn't know the difference and would lock the entire second half (50% to 100%) This refactoring work will also help enable the addition of mtd_is_locked() support and potentially the support of bottom boot protection (TB=1). Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: fixup kernel-doc for flash lock/unlock function pointersBrian Norris
I got the names of these fields wrong. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: use SNOR_MFR_* instead of CFI_MFR_*Brian Norris
No functional change, just cosmetic. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: add SPI NOR manufacturer IDsBrian Norris
These are often similar for CFI (parallel NOR) and for SPI NOR, but they aren't always the same, for various reasons (different namespaces, company acquisitions and renames, etc.). And some don't have CFI_MFR_* entries at all. So let's make a proper place to list the SPI NOR IDs, with all the SPI NOR specific assumptions and comments. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: make bitfield constants more consistentBrian Norris
These status bits use different ways of representing similar integer constants -- some are decimal, some are hex. Make them more consistent. At the same time, impose my own preference, since IMO it's clearer what these are when using the BIT() macro. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: make implicit <linux/bitops.h> dependency explicitBrian Norris
We use BIT() in the header. No real problem for now, but it's better to be accurate. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: Add support for s25fl004kSean Nyekjaer
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: s25fl204k supports dual I/0Sean Nyekjaer
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: pass page number to ecc->write_xxx() methodsBoris BREZILLON
The ->read_xxx() methods are all passed the page number the NAND controller is supposed to read, but ->write_xxx() do not have such a parameter. This is a problem if we want to properly implement data scrambling/randomization in order to mitigate MLC sensibility to repeated pattern: to prevent bitflips in adjacent pages in the same block we need to avoid repeating the same pattern at the same offset in those pages, hence the randomizer/scrambler engine need to be passed the page value in order to adapt its seed accordingly. Moreover, adding the page parameter to the ->write_xxx() methods add some consistency to the current API. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Josh Wu <josh.wu@atmel.com> CC: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> CC: Maxime Ripard <maxime.ripard@free-electrons.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Huang Shijie <shijie.huang@arm.com> CC: Stefan Agner <stefan@agner.ch> CC: devel@driverdev.osuosl.org CC: linux-arm-kernel@lists.infradead.org CC: linux-kernel@vger.kernel.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: txx9ndfmc: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: jz4740_nand: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: fsl_upm: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: socrates_nand: drop owner assignmentFrans Klaver
Owner is automatically set by mtdcore. Make use of that. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: fsl_elbc_nand: show parent device in sysfsFrans Klaver
Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: pxa3xx_nand: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: gpio: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13staging: mt29f_spinand: show parent device in sysfsFrans Klaver
Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, take advantage of the default owner and name values set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: onenand: omap2: drop owner and name assignmentFrans Klaver
Owner and name are automatically set by mtdcore. Make use of that. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: s3c2410: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: sharpsl: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: omap2: show parent device structure in sysfsFrans Klaver
Make sure the device structure is properly shown in sysfs by properly filling in dev.parent. While at it, make use of the default owner and name values set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: onenand: samsung: drop owner assignmentFrans Klaver
Owner is automatically set by mtdcore. Make use of that. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: lpc32xx_mlc: drop owner assignmentFrans Klaver
Owner is automatically set by mtdcore. Make use of that. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: ndfc: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: pasemi_nand: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: mxc_nand: drop owner assignmentFrans Klaver
Owner is automatically set by mtdcore. Make use of that. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: onenand: generic: show parent device in sysfsFrans Klaver
Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, take advantage of the default owner and name values set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: tmio_nand: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: sunxi_nand: drop owner assignmentFrans Klaver
Owner is automatically set by mtdcore. Make use of that. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: sh_flctl: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: r852: drop owner assignmentFrans Klaver
Owner is automatically set by mtdcore. Make use of that. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: plat_nand: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner and name set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: orion_nand: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-07 00:30:42 +0000