summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/renesas/ravb_main.c kernel/bpf/syscall.c net/ipv4/ipmr.c All three conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "A lot of Thanksgiving turkey leftovers accumulated, here goes: 1) Fix bluetooth l2cap_chan object leak, from Johan Hedberg. 2) IDs for some new iwlwifi chips, from Oren Givon. 3) Fix rtlwifi lockups on boot, from Larry Finger. 4) Fix memory leak in fm10k, from Stephen Hemminger. 5) We have a route leak in the ipv6 tunnel infrastructure, fix from Paolo Abeni. 6) Fix buffer pointer handling in arm64 bpf JIT,f rom Zi Shen Lim. 7) Wrong lockdep annotations in tcp md5 support, fix from Eric Dumazet. 8) Work around some middle boxes which prevent proper handling of TCP Fast Open, from Yuchung Cheng. 9) TCP repair can do huge kmalloc() requests, build paged SKBs instead. From Eric Dumazet. 10) Fix msg_controllen overflow in scm_detach_fds, from Daniel Borkmann. 11) Fix device leaks on ipmr table destruction in ipv4 and ipv6, from Nikolay Aleksandrov. 12) Fix use after free in epoll with AF_UNIX sockets, from Rainer Weikusat. 13) Fix double free in VRF code, from Nikolay Aleksandrov. 14) Fix skb leaks on socket receive queue in tipc, from Ying Xue. 15) Fix ifup/ifdown crach in xgene driver, from Iyappan Subramanian. 16) Fix clearing of persistent array maps in bpf, from Daniel Borkmann. 17) In TCP, for the cross-SYN case, we don't initialize tp->copied_seq early enough. From Eric Dumazet. 18) Fix out of bounds accesses in bpf array implementation when updating elements, from Daniel Borkmann. 19) Fill gaps in RCU protection of np->opt in ipv6 stack, from Eric Dumazet. 20) When dumping proxy neigh entries, we have to accomodate NULL device pointers properly, from Konstantin Khlebnikov. 21) SCTP doesn't release all ipv6 socket resources properly, fix from Eric Dumazet. 22) Prevent underflows of sch->q.qlen for multiqueue packet schedulers, also from Eric Dumazet. 23) Fix MAC and unicast list handling in bnxt_en driver, from Jeffrey Huang and Michael Chan. 24) Don't actively scan radar channels, from Antonio Quartulli" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (110 commits) net: phy: reset only targeted phy bnxt_en: Setup uc_list mac filters after resetting the chip. bnxt_en: enforce proper storing of MAC address bnxt_en: Fixed incorrect implementation of ndo_set_mac_address net: lpc_eth: remove irq > NR_IRQS check from probe() net_sched: fix qdisc_tree_decrease_qlen() races openvswitch: fix hangup on vxlan/gre/geneve device deletion ipv4: igmp: Allow removing groups from a removed interface ipv6: sctp: implement sctp_v6_destroy_sock() arm64: bpf: add 'store immediate' instruction ipv6: kill sk_dst_lock ipv6: sctp: add rcu protection around np->opt net/neighbour: fix crash at dumping device-agnostic proxy entries sctp: use GFP_USER for user-controlled kmalloc sctp: convert sack_needed and sack_generation to bits ipv6: add complete rcu protection around np->opt bpf: fix allocation warnings in bpf maps and integer overflow mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0 net: mvneta: enable setting custom TX IP checksum limit net: mvneta: fix error path for building skb ...
2015-12-03Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A collection of fixes from this series. The most important here is a regression fix for an issue that some folks would hit in blk-merge.c, and the NVMe queue depth limit for the screwed up Apple "nvme" controller. In more detail, this pull request contains: - a set of fixes for null_blk, including a fix for a few corner cases where we could hang the device. From Arianna and Paolo. - lightnvm: - A build improvement from Keith. - Update the qemu pci id detection from Matias. - Error handling fixes for leaks and other little fixes from Sudip and Wenwei. - fix from Eric where BLKRRPART would not return EBUSY for whole device mounts, only when partitions were mounted. - fix from Jan Kara, where EOF O_DIRECT reads would return negatively. - remove check for rq_mergeable() when checking limits for cloned requests. The check doesn't make any sense. It's assuming that since NOMERGE is set on the request that we don't have to recalculate limits since the request didn't change, but that's not true if the request has been redirected. From Hannes. - correctly get the bio front segment value set for single segment bio's, fixing a BUG() in blk-merge. From Ming" * 'for-linus' of git://git.kernel.dk/linux-block: nvme: temporary fix for Apple controller reset null_blk: change type of completion_nsec to unsigned long null_blk: guarantee device restart in all irq modes null_blk: set a separate timer for each command blk-merge: fix computing bio->bi_seg_front_size in case of single segment direct-io: Fix negative return from dio read beyond eof block: Always check queue limits for cloned requests lightnvm: missing nvm_lock acquire lightnvm: unconverted ppa returned in get_bb_tbl lightnvm: refactor and change vendor id for qemu lightnvm: do device max sectors boundary check first lightnvm: fix ioctl memory leaks lightnvm: free memory when gennvm register fails lightnvm: Simplify config when disabled Return EBUSY from BLKRRPART for mounted whole-dev fs
2015-12-03Merge tag 'trace-v4.4-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "During the merge window I added a new file that is used to filter trace events on pids. It filters all events where only tasks with their pid in that file exists. It also handles the sched_switch and sched_wakeup trace events where the current task does not have its pid in the file, but the task either being switched to or awaken does. Unfortunately, I forgot about sched_wakeup_new and sched_waking. Both of these tracepoints use the same class as the sched_wakeup tracepoint, and they too should be included in what gets filtered by the set_event_pid file" * tag 'trace-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add sched_wakeup_new and sched_waking tracepoints for pid filter
2015-12-03Merge tag 'mac80211-for-davem-2015-12-02' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A small set of fixes for 4.4: * fix scanning in mac80211 to not actively scan radar channels (from Antonio) * fix uninitialized variable in remain-on-channel that could lead to treating frame TX as remain-on-channel and not sending the frame at all * remove NL80211_FEATURE_FULL_AP_CLIENT_STATE again, it was broken and needs more work, we'll enable it later * fix call_rcu() induced use-after-reset/free in mesh (that was suddenly causing issues in certain tests) * always request block-ack window size 64 as we found some APs will otherwise crash (really ...) * fix P2P-Device teardown sequence to avoid restarting with uninitialized data ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03mlxsw: core: Change BUG to WARN in hwmon codeJiri Pirko
Better to just warn the user that something really odd is going on and continue to run. Suggested-by: Or Gerlitz <gerlitz.or@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: phy: reset only targeted phyJérôme Pouiller
It is possible to address another chip on same MDIO bus. The case is correctly handled for media advertising. It is taken into account only if mii_data->phy_id == phydev->addr. However, this condition was missing for reset case. Signed-off-by: Jérôme Pouiller <jezz@sysmic.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03stmmac: ipq806x: Return error values instead of pointersStephen Boyd
Typically we return error pointers when we want to use those pointers in the non-error case, but this function is just returning error pointers or NULL for success. Change the style to plain int to follow normal kernel coding styles. Cc: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03tipc: fix node reference count bugJon Paul Maloy
Commit 5405ff6e15f40f2f ("tipc: convert node lock to rwlock") introduced a bug to the node reference counter handling. When a message is successfully sent in the function tipc_node_xmit(), we return directly after releasing the node lock, instead of continuing and decrementing the node reference counter as we should do. This commit fixes this bug. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge branch 'mvneta-ethtool-autoneg'David S. Miller
Stas Sergeev says: ==================== mvneta: implement ethtool autonegotiation control These 2 patches add an ability to control the autonegotiation via ethtool. For example: ethtool -s eth0 autoneg off ethtool -s eth0 autoneg on This is needed if you want to connect the mvneta's MII to different switches or PHYs: the ones the do support the in-band status, and the ones that do not. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03mvneta: implement ethtool autonegotiation controlStas Sergeev
This patch allows to do ethtool -s eth0 autoneg off ethtool -s eth0 autoneg on to disable or enable autonegotiation at run-time. Without that functionality, the only way to control the autonegotiation is to modify the device tree. This is needed if you plan to use the same kernel with different ethernet switches, the ones that support the in-band status and the ones that not. CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03mvneta: consolidate autoneg enablingStas Sergeev
This moves autoneg-related bit manipulations to the single place. CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: mv643xx: Use platform_register/unregister_drivers()Thierry Reding
These new helpers simplify implementing multi-driver modules and properly handle failure to register one driver by unregistering all previously registered drivers. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: mpc52xx: Use platform_register/unregister_drivers()Thierry Reding
These new helpers simplify implementing multi-driver modules and properly handle failure to register one driver by unregistering all previously registered drivers. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: bcm63xx: Use platform_register/unregister_drivers()Thierry Reding
These new helpers simplify implementing multi-driver modules and properly handle failure to register one driver by unregistering all previously registered drivers. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: bfin_mac: Use platform_register/unregister_drivers()Thierry Reding
These new helpers simplify implementing multi-driver modules and properly handle failure to register one driver by unregistering all previously registered drivers. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03pppox: use standard module auto-loading featureGuillaume Nault
* Register PF_PPPOX with pppox module rather than with pppoe, so that pppoe doesn't get loaded for any PF_PPPOX socket. * Register PX_PROTO_* with standard MODULE_ALIAS_NET_PF_PROTO() instead of using pppox's own naming scheme. * While there, add auto-loading feature for pptp. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge branch 'bnxt_en-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: set mac address and uc_list bug fixes. Fix ndo_set_mac_address() for PF and VF. Re-apply uc_list after chip reset. v2: Fix compile error if CONFIG_BNXT_SRIOV is not set. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03bnxt_en: Setup uc_list mac filters after resetting the chip.Michael Chan
Call bnxt_cfg_rx_mode() in bnxt_init_chip() to setup uc_list and mc_list mac address filters. Before the patch, uc_list is not setup again after chip reset (such as ethtool ring size change) and macvlans don't work any more after that. Modify bnxt_cfg_rx_mode() to return error codes appropriately so that the init chip sequence can detect any failures. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03bnxt_en: enforce proper storing of MAC addressJeffrey Huang
For PF, the bp->pf.mac_addr always holds the permanent MAC addr assigned by the HW. For VF, the bp->vf.mac_addr always holds the administrator assigned VF MAC addr. The random generated VF MAC addr should never get stored to bp->vf.mac_addr. This way, when the VF wants to change the MAC address, we can tell if the adminstrator has already set it and disallow the VF from changing it. v2: Fix compile error if CONFIG_BNXT_SRIOV is not set. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03bnxt_en: Fixed incorrect implementation of ndo_set_mac_addressJeffrey Huang
The existing ndo_set_mac_address only copies the new MAC addr and didn't set the new MAC addr to the HW. The correct way is to delete the existing default MAC filter from HW and add the new one. Because of RFS filters are also dependent on the default mac filter l2 context, the driver must go thru close_nic() to delete the default MAC and RFS filters, then open_nic() to set the default MAC address to HW. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge branch 'vsock-virtio'David S. Miller
Stefan Hajnoczi says: ==================== Add virtio transport for AF_VSOCK v2: * Rebased onto Linux v4.4-rc2 * vhost: Refuse to assign reserved CIDs * vhost: Refuse guest CID if already in use * vhost: Only accept correctly addressed packets (no spoofing!) * vhost: Support flexible rx/tx descriptor layout * vhost: Add missing total_tx_buf decrement * virtio_transport: Fix total_tx_buf accounting * virtio_transport: Add virtio_transport global mutex to prevent races * common: Notify other side of SOCK_STREAM disconnect (fixes shutdown semantics) * common: Avoid recursive mutex_lock(tx_lock) for write_space (fixes deadlock) * common: Define VIRTIO_VSOCK_TYPE_STREAM/DGRAM hardware interface constants * common: Define VIRTIO_VSOCK_SHUTDOWN_RCV/SEND hardware interface constants * common: Fix peer_buf_alloc inheritance on child socket This patch series adds a virtio transport for AF_VSOCK (net/vmw_vsock/). AF_VSOCK is designed for communication between virtual machines and hypervisors. It is currently only implemented for VMware's VMCI transport. This series implements the proposed virtio-vsock device specification from here: http://comments.gmane.org/gmane.comp.emulators.virtio.devel/855 Most of the work was done by Asias He and Gerd Hoffmann a while back. I have picked up the series again. The QEMU userspace changes are here: https://github.com/stefanha/qemu/commits/vsock Why virtio-vsock? ----------------- Guest<->host communication is currently done over the virtio-serial device. This makes it hard to port sockets API-based applications and is limited to static ports. virtio-vsock uses the sockets API so that applications can rely on familiar SOCK_STREAM and SOCK_DGRAM semantics. Applications on the host can easily connect to guest agents because the sockets API allows multiple connections to a listen socket (unlike virtio-serial). This simplifies the guest<->host communication and eliminates the need for extra processes on the host to arbitrate virtio-serial ports. Overview -------- This series adds 3 pieces: 1. virtio_transport_common.ko - core virtio vsock code that uses vsock.ko 2. virtio_transport.ko - guest driver 3. drivers/vhost/vsock.ko - host driver Howto ----- The following kernel options are needed: CONFIG_VSOCKETS=y CONFIG_VIRTIO_VSOCKETS=y CONFIG_VIRTIO_VSOCKETS_COMMON=y CONFIG_VHOST_VSOCK=m Launch QEMU as follows: # qemu ... -device vhost-vsock-pci,id=vhost-vsock-pci0,guest-cid=3 Guest and host can communicate via AF_VSOCK sockets. The host's CID (address) is 2 and the guest is automatically assigned a CID (use VMADDR_CID_ANY (-1) to bind to it). Status ------ There are a few design changes I'd like to make to the virtio-vsock device: 1. The 3-way handshake isn't necessary over a reliable transport (virtqueue). Spoofing packets is also impossible so the security aspects of the 3-way handshake (including syn cookie) add nothing. The next version will have a single operation to establish a connection. 2. Credit-based flow control doesn't work for SOCK_DGRAM since multiple clients can transmit to the same listen socket. There is no way for the clients to coordinate buffer space with each other fairly. The next version will drop credit-based flow control for SOCK_DGRAM and only rely on best-effort delivery. SOCK_STREAM still has guaranteed delivery. 3. In the next version only the host will be able to establish connections (i.e. to connect to a guest agent). This is for security reasons since there is currently no ability to provide host services only to certain guests. This also matches how AF_VSOCK works on modern VMware hypervisors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03VSOCK: Add Makefile and KconfigAsias He
Enable virtio-vsock and vhost-vsock. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03VSOCK: Introduce vhost-vsock.koAsias He
VM sockets vhost transport implementation. This module runs in host kernel. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03VSOCK: Introduce virtio-vsock.koAsias He
VM sockets virtio transport implementation. This module runs in guest kernel. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03VSOCK: Introduce virtio-vsock-common.koAsias He
This module contains the common code and header files for the following virtio-vsock and virtio-vhost kernel modules. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03VSOCK: Introduce vsock_find_unbound_socket and vsock_bind_dgram_genericAsias He
Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03mpls: support for dead routesRoopa Prabhu
Adds support for RTNH_F_DEAD and RTNH_F_LINKDOWN flags on mpls routes due to link events. Also adds code to ignore dead routes during route selection. Unlike ip routes, mpls routes are not deleted when the route goes dead. This is current mpls behaviour and this patch does not change that. With this patch however, routes will be marked dead. dead routes are not notified to userspace (this is consistent with ipv4 routes). dead routes: ----------- $ip -f mpls route show 100 nexthop as to 200 via inet 10.1.1.2 dev swp1 nexthop as to 700 via inet 10.1.1.6 dev swp2 $ip link set dev swp1 down $ip link show dev swp1 4: swp1: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 00:02:00:00:00:01 brd ff:ff:ff:ff:ff:ff $ip -f mpls route show 100 nexthop as to 200 via inet 10.1.1.2 dev swp1 dead linkdown nexthop as to 700 via inet 10.1.1.6 dev swp2 linkdown routes: ---------------- $ip -f mpls route show 100 nexthop as to 200 via inet 10.1.1.2 dev swp1 nexthop as to 700 via inet 10.1.1.6 dev swp2 $ip link show dev swp1 4: swp1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:02:00:00:00:01 brd ff:ff:ff:ff:ff:ff /* carrier goes down */ $ip link show dev swp1 4: swp1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 00:02:00:00:00:01 brd ff:ff:ff:ff:ff:ff $ip -f mpls route show 100 nexthop as to 200 via inet 10.1.1.2 dev swp1 linkdown nexthop as to 700 via inet 10.1.1.6 dev swp2 Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: lpc_eth: remove irq > NR_IRQS check from probe()Vladimir Zapolskiy
If the driver is used on an ARM platform with SPARSE_IRQ defined, semantics of NR_IRQS is different (minimal value of virtual irqs) and by default it is set to 16, see arch/arm/include/asm/irq.h. This value may be less than the actual number of virtual irqs, which may break the driver initialization. The check removal allows to use the driver on such a platform, and, if irq controller driver works correctly, the check is not needed on legacy platforms. Fixes a runtime problem: lpc-eth 31060000.ethernet: error getting resources. lpc_eth: lpc-eth: not found (-6). Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge branch 'rsvb-compat-strings'David S. Miller
Simon Horman says: ==================== ravb: More compatibility strings this short series adds generic gen2 and gen3, and soc-specific compatibility strings for the missing gen2 SoCs. Key Changes in v2: * Include "rcar-" in generic bindings ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03ravb: add device tree support for r8a779[123]Simon Horman
Simply document new compatibility strings. As a previous patch adds a generic R-Car Gen2 compatibility string there appears to be no need for a driver updates. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03ravb: add fallback compatibility stringsSimon Horman
Add fallback compatibility strings for R-Car Gen 2 & 3 SoC Families. This is in keeping with the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net_sched: fix qdisc_tree_decrease_qlen() racesEric Dumazet
qdisc_tree_decrease_qlen() suffers from two problems on multiqueue devices. One problem is that it updates sch->q.qlen and sch->qstats.drops on the mq/mqprio root qdisc, while it should not : Daniele reported underflows errors : [ 681.774821] PAX: sch->q.qlen: 0 n: 1 [ 681.774825] PAX: size overflow detected in function qdisc_tree_decrease_qlen net/sched/sch_api.c:769 cicus.693_49 min, count: 72, decl: qlen; num: 0; context: sk_buff_head; [ 681.774954] CPU: 2 PID: 19 Comm: ksoftirqd/2 Tainted: G O 4.2.6.201511282239-1-grsec #1 [ 681.774955] Hardware name: ASUSTeK COMPUTER INC. X302LJ/X302LJ, BIOS X302LJ.202 03/05/2015 [ 681.774956] ffffffffa9a04863 0000000000000000 0000000000000000 ffffffffa990ff7c [ 681.774959] ffffc90000d3bc38 ffffffffa95d2810 0000000000000007 ffffffffa991002b [ 681.774960] ffffc90000d3bc68 ffffffffa91a44f4 0000000000000001 0000000000000001 [ 681.774962] Call Trace: [ 681.774967] [<ffffffffa95d2810>] dump_stack+0x4c/0x7f [ 681.774970] [<ffffffffa91a44f4>] report_size_overflow+0x34/0x50 [ 681.774972] [<ffffffffa94d17e2>] qdisc_tree_decrease_qlen+0x152/0x160 [ 681.774976] [<ffffffffc02694b1>] fq_codel_dequeue+0x7b1/0x820 [sch_fq_codel] [ 681.774978] [<ffffffffc02680a0>] ? qdisc_peek_dequeued+0xa0/0xa0 [sch_fq_codel] [ 681.774980] [<ffffffffa94cd92d>] __qdisc_run+0x4d/0x1d0 [ 681.774983] [<ffffffffa949b2b2>] net_tx_action+0xc2/0x160 [ 681.774985] [<ffffffffa90664c1>] __do_softirq+0xf1/0x200 [ 681.774987] [<ffffffffa90665ee>] run_ksoftirqd+0x1e/0x30 [ 681.774989] [<ffffffffa90896b0>] smpboot_thread_fn+0x150/0x260 [ 681.774991] [<ffffffffa9089560>] ? sort_range+0x40/0x40 [ 681.774992] [<ffffffffa9085fe4>] kthread+0xe4/0x100 [ 681.774994] [<ffffffffa9085f00>] ? kthread_worker_fn+0x170/0x170 [ 681.774995] [<ffffffffa95d8d1e>] ret_from_fork+0x3e/0x70 mq/mqprio have their own ways to report qlen/drops by folding stats on all their queues, with appropriate locking. A second problem is that qdisc_tree_decrease_qlen() calls qdisc_lookup() without proper locking : concurrent qdisc updates could corrupt the list that qdisc_match_from_root() parses to find a qdisc given its handle. Fix first problem adding a TCQ_F_NOPARENT qdisc flag that qdisc_tree_decrease_qlen() can use to abort its tree traversal, as soon as it meets a mq/mqprio qdisc children. Second problem can be fixed by RCU protection. Qdisc are already freed after RCU grace period, so qdisc_list_add() and qdisc_list_del() simply have to use appropriate rcu list variants. A future patch will add a per struct netdev_queue list anchor, so that qdisc_tree_decrease_qlen() can have more efficient lookups. Reported-by: Daniele Fucini <dfucini@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <cwang@twopensource.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: ipv6: restrict hop_limit sysctl setting to range [1; 255]Phil Sutter
Setting a value bigger than 255 resulted in using only the lower eight bits of that value as it is assigned to the u8 header field. To avoid this unexpected result, reject such values. Setting a value of zero is technically possible, but hosts receiving such a packet have to treat it like hop_limit was set to one, according to RFC2460. Therefore I don't see a use-case for that. Setting a route's hop_limit to zero in iproute2 means to use the sysctl default, which is not the case here: Setting e.g. net.conf.eth0.hop_limit=0 will not make the kernel use net.conf.all.hop_limit for outgoing packets on eth0. To avoid these kinds of confusion, reject zero. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03openvswitch: fix hangup on vxlan/gre/geneve device deletionPaolo Abeni
Each openvswitch tunnel vport (vxlan,gre,geneve) holds a reference to the underlying tunnel device, but never released it when such device is deleted. Deleting the underlying device via the ip tool cause the kernel to hangup in the netdev_wait_allrefs() loop. This commit ensure that on device unregistration dp_detach_port_notify() is called for all vports that hold the device reference, properly releasing it. Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device") Fixes: b2acd1dc3949 ("openvswitch: Use regular GRE net_device instead of vport") Fixes: 6b001e682e90 ("openvswitch: Use Geneve device.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Flavio Leitner <fbl@sysclose.org> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03ravb: ptp: Add CONFIG mode supportKazuya Mizuguchi
This patch makes PTP support active in CONFIG mode on R-Car Gen3. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge branch 'netronome-NFP4000-NFP6000'David S. Miller
Jakub Kicinski says: ==================== Netronome NFP4000/NFP6000 NIC VF driver This patchset adds support for VFs of Netronome's NFP-4000 and NFP-6000 based NICs. We are currently also preparing the submission for the PF driver, but it is not quite ready yet. The PF driver can be found on GitHub: https://github.com/Netronome/nfp-drv-kmods ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: add driver for Netronome NFP4000/NFP6000 NIC VFsJakub Kicinski
Add driver for Virtual Functions for the Netronome's NFP-4000 and NFP-6000 based NICs. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Rolf Neugebauer <rolf.neugebauer@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03pci_ids: add Netronome Systems vendorJakub Kicinski
Add PCI vendor id for Netronome Systems. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Rolf Neugebauer <rolf.neugebauer@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2015-12-03 This series contains updates to i40e and i40evf only. Mitch updates the i40evf driver by increasing the maximum number of queues, since future devices will allow for more queue pairs. Cleans up a duplicate printing of the driver info string done in init, since it is already done in probe. Cleaned up the several allocations which did not need to be at atomic level, where GFP_KERNEL would work just fine. Then makes i40e_sync_vsi_filters() a more mature function, make having a common exit point so it will properly release the busy lock on the VSI and propagate errors to the callers. Then does some whitespace housekeeping in i40evf. Kiran moves and updates the detection/recovery of transmit queue hang code to service_task from tx_timeout function. Also fixed memory leak when users program flow-director filter using ethtool (sideband filter programming), the cause being the check of 'tx_buffer->skb' was preventing 'raw_buf' from being freed as part of the cleanup. Jesse enabled the ability to turn off/on packet split using ethtool priv flags. Then does some housekeeping for both the i40e and i40evf drivers which includes: remove unused/useless code, correct whitespace, remove duplicate #include, fix incorrect comment, etc... Neerav cleans up functions to gather Flow Control Rx XOFF stats, since the recent change in the driver logic for checking transmit hang has been moved, so these functions do not do anything meaningful any longer. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge branch 'mlx5-connectx-4-sriov'David S. Miller
Or Gerlitz says: ==================== Introducing ConnectX-4 Ethernet SRIOV This patchset introduces the support of Ethernet SRIOV in ConnectX-4 family of 100G Ethernet NICs. Some features are still missing, but all the basic SRIOV functionalities are there already. Basic Introduction: ConnectX-4 HW architecture provides two kinds of underlying HW switches. MPFS (Multi Physical Function Switch) or L2 Table in Software terms: The HCA has one MPFS switch per physical port, this switch is responsible of forwarding Unicast traffic to the various overlying Physical Functions (PFs). Multicast traffic is flooded amongst all the PFs, Each PF can request to forward a unicast MAC to its E-Switch Uplink vport (which we will cover later) through SET_L2_TABLE_ENTRY HW command. MPFS has five ports, four are connected to PFs (one for each) and one is connected directly to the Physical Port (Physical Link). E-Switch (Ethernet Switch): The HCA has one per physical function. The main responsibility of this component is to forward Unicast/Multicast and vlan tagged/untagged traffic to the various Virtual Functions (VFs) allocated by the PF. Unlike MPFS, the PF needs to explicitly create the E-Switch FDB table, Which is a HW flow table managed by the PF driver whenever vport_group_manager capability bit is set for this PF. E-Switch has Virtual Ports (vports) entities as its ports, vport0 and uplink vport are special kind of vports that represents PF vport (vport0) and uplink vport which is connected to the MPFS switch (if exists) as the PF external link. vport1..vportN represent VF0..VF(N-1) egress/ingress ports. E-Switch FDB contains forwarding rules such as: UC MAC0 -> vport0(PF). UC MAC1 -> vport1. UC MAC2 -> vport2. MC MACX -> vport0, vport2, Uplink. MC MACY -> vport1, Uplink. For unmatched traffic FDB has the following default rules: Unmatched Traffic (src vport != Uplink) -> Uplink. Unmatched Traffic (src vport == Uplink) -> vport0(PF). NIC VPort context: Each NIC (VF/PF) has its own vport context which will be used to store the current NIC vport context (UC/MC and vlan lists) and other NIC properties such as MTU, promisc mode, etc.. NIC (VF/PF) driver is responsible of constantly updating this context. FDB rules population: Each NIC vport (VF/PF) will notify E-Switch manager of its UC/MC vport context changes via modify vport context command, which will be translated to an event that will be handled by E-Switch manager (PF) which will update FDB table accordingly. Both PF and VF use the same driver and submit commands directly to the firmware. The PF sees the vport_group_manager capability bit and as such runs the code to populate the embedded switches as explained above. The patch goes as follows: Patches 1-2 introduces the basic PCI SRIOV functionalities and the support of Connectx4 to enable specific VFs via enable/disable HCA commands. These two patches will be also in use later for the IB SRIOV flow. Patches 3-8 Introduces the basic E-Switch capabilities and commands to be used later by VF to modify and update its NIC vport context, and by PF (E-Switch Manager) driver to Query the VF NIC context and acts accordingly. Patches 9-10 Provide the needed functionality of a NIC driver VF/PF to support SRIOV, mainly vport context update support. Patch 11 ("net/mlx5: Introducing E-Switch and l2 table"), Introduces the basic E-Switch support and infrastructure to read vport context events and to update MPFS L2 Table of the UC mac addresses request by the PF. Patches 12-18 Introduces SRIOV enablemenet and E-Switch FDB table management It adds the Basic E-Swtich public API to set and get sriov properties to be used in PF netdev sriov ndos. Patchset was applied ontop of commit 3f8c0f7 "gianfar: use of_property_read_bool()" Saeed, Eli and Or. changes from V0, addressed feedback from Alex Duyck: - patch 09, remove the loop to seek the device address - patch 09, avoid using array as returned value from helper function - patch 10, fix possible buffer over-run changes from V1, addressed feedback from and Julia Lawall and kbuild test robot - patch 11 check the right variable for allocation failure - patch 18 eliminated unneeded semicolon ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5e: Add support for SR-IOV ndosSaeed Mahameed
Implement and enable SR-IOV ndos to manage SR-IOV configuration via netdev netlink API. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5: E-Switch, Introduce get vf statisticsSaeed Mahameed
Add support to get VF statistics using query vport counter command. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5: E-Switch, Introduce set vport vlan (VST mode)Saeed Mahameed
Add query and modify functions to control client vlan and qos striping or insertion, in E-Switch vports contexts. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5: E-Switch, Introduce HCA cap and E-Switch vport contextSaeed Mahameed
E-Switch vport context is unlike NIC vport context, managed by the E-Switch manager or vport_group_manager and not by the NIC(VF) driver. The E-Switch manager can access (read/modify) any of its vports E-Switch context. Currently E-Switch vport context includes only clietnt and server vlan insertion and striping data (for later support of VST mode). Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5: E-Switch, Introduce Vport administration functionsSaeed Mahameed
Implement set VF mac/link state and query VF config to be used later in nedev VF ndos or any other management API. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5: E-Switch, Add SR-IOV (FDB) supportSaeed Mahameed
Enabling E-Switch SRIOV for nvfs+1 vports. Create E-Switch FDB for L2 UC/MC mac steering between VFs/PF and external vport (Uplink). FDB contains forwarding rules such as: UC MAC0 -> vport0(PF). UC MAC1 -> vport1. UC MAC2 -> vport2. MC MACX -> vport0, vport2, Uplink. MC MACY -> vport1, Uplink. For unmatched traffic FDB has the following default rules: Unmached Traffic (src vport != Uplink) -> Uplink. Unmached Traffic (src vport == Uplink) -> vport0(PF). FDB rules population: Each NIC vport (VF) will notify E-Switch manager of its UC/MC vport context changes via modify vport context command, which will be translated to an event that will be handled by E-Switch manager (PF) which will update FDB table accordingly. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5: E-Switch, Introduce FDB hardware capabilitiesSaeed Mahameed
Define needed hardware structures and capabilities needed for E-Switch FDB flow tables and read them on driver load. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5: Introducing E-Switch and l2 tableSaeed Mahameed
E-Switch is the software entity that represents and manages ConnectX4 inter-HCA ethernet l2 switching. E-Switch has its own Virtual Ports, each Vport/vNIC/VF can be connected to the device through a vport of an e-switch. Each e-switch is managed by one vNIC identified by HCA_CAP.vport_group_manager (usually it is the PF/vport[0]), and its main responsibility is to forward each packet to the right vport. e-Switch needs to manage its own l2-table and FDB tables. L2 table is a flow table that is managed by FW, it is needed for Multi-host (Multi PF) configuration for inter HCA switching between PFs. FDB table is a flow table that is totally managed by e-Switch driver, its main responsibility is to switch packets between e-Swtich internal vports and uplink vport that belong to the same. This patch introduces only e-Swtich l2 table management, FDB managemnt will come later when ethernet SRIOV/VFs will be enabled. preperation for ethernet sriov and l2 table management. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5e: Write vlan list into vport contextSaeed Mahameed
Each Vport/vNIC must notify underlying e-Switch layer for vlan table changes in-order to update SR-IOV FDB tables. We do that at vlan_rx_add_vid and vlan_rx_kill_vid ndos. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>