Age | Commit message (Collapse) | Author |
|
Simplify the return expression.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921082443.2591721-1-liushixin2@huawei.com
|
|
Add the support for enabling optional regulator that may be used as VCC
source.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Replaced 'error' variable with 'ret']
[Renamed regulator from 'vcc' to 'power']
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922105526.5252-1-laurent.pinchart+renesas@ideasonboard.com
|
|
Use kobj_to_dev() instead of container_of()
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1600776867-24226-1-git-send-email-wangqing@vivo.com
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/video/fbdev/sis/300vtbl.h:1064:28: warning:
‘SiS300_CHTVVCLKSONTSC’ defined but not used [-Wunused-const-variable=]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1600957106-13741-1-git-send-email-liheng40@huawei.com
|
|
Compute new timings to get a framerate of 50fps with a pixel clock
@54Mhz.
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925141618.12097-1-yannick.fertre@st.com
|
|
Because clk_disable_unprepare already checked NULL clock parameter,
so the additional checks are unnecessary, just remove it
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930081859.52431-1-vulab@iscas.ac.cn
|
|
On some panels hooked up to the ti-sn65dsi86 bridge chip we found that
link training was failing. Specifically, we'd see:
ti_sn65dsi86 2-002d: [drm:ti_sn_bridge_enable] *ERROR* Link training failed, link is off (-5)
The panel was hooked up to a logic analyzer and it was found that, as
part of link training, the bridge chip was writing a 0x1 to DPCD
address 00600h and the panel responded NACK. As can be seen in header
files, the write of 0x1 to DPCD address 0x600h means we were trying to
write the value DP_SET_POWER_D0 to the register DP_SET_POWER. The
panel vendor says that a NACK in this case is not unexpected and means
"not ready, try again".
In testing, we found that this panel would respond with a NACK in
about 1/25 times. Adding the retry logic worked fine and the most
number of tries needed was 3. Just to be safe, we'll add 10 tries
here and we'll add a little blurb to the logs if we ever need more
than 5.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002135920.1.I2adbc90b2db127763e2444bd5a4e5bf30e1db8e5@changeid
|
|
We need to reset both for the panel to show an image.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/15d3dc7eb4e031f380be1298ed3ac9085626f26b.1602584953.git.agx@sigxcpu.org
|
|
The mantix panel needs two reset lines (RESX and TP_RSTN) deasserted to
output an image. Only deasserting RESX is not enough and the display
will stay blank. Deassert in prepare() and assert in unprepare() to keep
device held in reset when off.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org
|
|
Don't dereference mode which was just NULL checked.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/659158549f3c6cc1c71ceed0943e760e861c1206.1602584953.git.agx@sigxcpu.org
|
|
clk_prepare_enable/clk_disable_unprepare
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014085722.26069-1-vulab@iscas.ac.cn
|
|
clk_prepare_enable/clk_disable_unprepare
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014084920.25813-1-vulab@iscas.ac.cn
|
|
Inspired by a patch by Chris Wilson for vgem. Plus this gives us vmap
at the gem bo level, which we need for generic fbdev emulation.
Luckily shmem also tracks ->vaddr, so we just need to adjust the code
all over a bit to make this fit.
Also wire up handle_to_fd, dunno why that was missing.
v2:
- Drop now unused container_of #define (Melissa)
- Make sure we keep creating cached objects, this is for testing
(Thomas)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201013111027.375999-1-daniel.vetter@ffwll.ch
|
|
The only thing we support is xrgb8888.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201009232156.3916879-1-daniel.vetter@ffwll.ch
|
|
The dma-buf API have been used under the assumption that the sg lists
returned from dma_buf_map_attachment() are fully page aligned. Lots of
stuff can break otherwise all over the place. Clarify this in the
documentation and add a check when DMA API debug is enabled.
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1602692161-107096-1-git-send-email-jianxin.xiong@intel.com
|
|
I observed this when unplugging a DP monitor whilst a computer is asleep
and then waking it up. This left DP chardev nodes still being present on
the filesystem and accessing these device nodes caused an oops because
drm_dp_aux_dev_get_by_minor() assumes a device exists if it is opened.
This can also be reproduced by creating a device node with mknod(1) and
issuing an open(2)
[166164.933198] BUG: kernel NULL pointer dereference, address: 0000000000000018
[166164.933202] #PF: supervisor read access in kernel mode
[166164.933204] #PF: error_code(0x0000) - not-present page
[166164.933205] PGD 0 P4D 0
[166164.933208] Oops: 0000 [#1] PREEMPT SMP NOPTI
[166164.933211] CPU: 4 PID: 99071 Comm: fwupd Tainted: G W
5.8.0-rc6+ #1
[166164.933213] Hardware name: LENOVO 20RD002VUS/20RD002VUS, BIOS R16ET25W
(1.11 ) 04/21/2020
[166164.933232] RIP: 0010:drm_dp_aux_dev_get_by_minor+0x29/0x70
[drm_kms_helper]
[166164.933234] Code: 00 0f 1f 44 00 00 55 48 89 e5 41 54 41 89 fc 48 c7
c7 60 01 a4 c0 e8 26 ab 30 d7 44 89 e6 48 c7 c7 80 01 a4 c0 e8 47 94 d6 d6
<8b> 50 18 49 89 c4 48 8d 78 18 85 d2 74 33 8d 4a 01 89 d0 f0 0f b1
[166164.933236] RSP: 0018:ffffb7d7c41cbbf0 EFLAGS: 00010246
[166164.933237] RAX: 0000000000000000 RBX: ffff8a90001fe900 RCX: 0000000000000000
[166164.933238] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffffc0a40180
[166164.933239] RBP: ffffb7d7c41cbbf8 R08: 0000000000000000 R09: ffff8a93e157d6d0
[166164.933240] R10: 0000000000000000 R11: ffffffffc0a40188 R12: 0000000000000003
[166164.933241] R13: ffff8a9402200e80 R14: ffff8a90001fe900 R15: 0000000000000000
[166164.933244] FS: 00007f7fb041eb00(0000) GS:ffff8a9411500000(0000)
knlGS:0000000000000000
[166164.933245] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[166164.933246] CR2: 0000000000000018 CR3: 00000000352c2003 CR4: 00000000003606e0
[166164.933247] Call Trace:
[166164.933264] auxdev_open+0x1b/0x40 [drm_kms_helper]
[166164.933278] chrdev_open+0xa7/0x1c0
[166164.933282] ? cdev_put.part.0+0x20/0x20
[166164.933287] do_dentry_open+0x161/0x3c0
[166164.933291] vfs_open+0x2d/0x30
[166164.933297] path_openat+0xb27/0x10e0
[166164.933306] ? atime_needs_update+0x73/0xd0
[166164.933309] do_filp_open+0x91/0x100
[166164.933313] ? __alloc_fd+0xb2/0x150
[166164.933316] do_sys_openat2+0x210/0x2d0
[166164.933318] do_sys_open+0x46/0x80
[166164.933320] __x64_sys_openat+0x20/0x30
[166164.933328] do_syscall_64+0x52/0xc0
[166164.933336] entry_SYSCALL_64_after_hwframe+0x44/0xa9
(gdb) disassemble drm_dp_aux_dev_get_by_minor+0x29
Dump of assembler code for function drm_dp_aux_dev_get_by_minor:
0x0000000000017b10 <+0>: callq 0x17b15 <drm_dp_aux_dev_get_by_minor+5>
0x0000000000017b15 <+5>: push %rbp
0x0000000000017b16 <+6>: mov %rsp,%rbp
0x0000000000017b19 <+9>: push %r12
0x0000000000017b1b <+11>: mov %edi,%r12d
0x0000000000017b1e <+14>: mov $0x0,%rdi
0x0000000000017b25 <+21>: callq 0x17b2a <drm_dp_aux_dev_get_by_minor+26>
0x0000000000017b2a <+26>: mov %r12d,%esi
0x0000000000017b2d <+29>: mov $0x0,%rdi
0x0000000000017b34 <+36>: callq 0x17b39 <drm_dp_aux_dev_get_by_minor+41>
0x0000000000017b39 <+41>: mov 0x18(%rax),%edx <=========
0x0000000000017b3c <+44>: mov %rax,%r12
0x0000000000017b3f <+47>: lea 0x18(%rax),%rdi
0x0000000000017b43 <+51>: test %edx,%edx
0x0000000000017b45 <+53>: je 0x17b7a <drm_dp_aux_dev_get_by_minor+106>
0x0000000000017b47 <+55>: lea 0x1(%rdx),%ecx
0x0000000000017b4a <+58>: mov %edx,%eax
0x0000000000017b4c <+60>: lock cmpxchg %ecx,(%rdi)
0x0000000000017b50 <+64>: jne 0x17b76 <drm_dp_aux_dev_get_by_minor+102>
0x0000000000017b52 <+66>: test %edx,%edx
0x0000000000017b54 <+68>: js 0x17b6d <drm_dp_aux_dev_get_by_minor+93>
0x0000000000017b56 <+70>: test %ecx,%ecx
0x0000000000017b58 <+72>: js 0x17b6d <drm_dp_aux_dev_get_by_minor+93>
0x0000000000017b5a <+74>: mov $0x0,%rdi
0x0000000000017b61 <+81>: callq 0x17b66 <drm_dp_aux_dev_get_by_minor+86>
0x0000000000017b66 <+86>: mov %r12,%rax
0x0000000000017b69 <+89>: pop %r12
0x0000000000017b6b <+91>: pop %rbp
0x0000000000017b6c <+92>: retq
0x0000000000017b6d <+93>: xor %esi,%esi
0x0000000000017b6f <+95>: callq 0x17b74 <drm_dp_aux_dev_get_by_minor+100>
0x0000000000017b74 <+100>: jmp 0x17b5a <drm_dp_aux_dev_get_by_minor+74>
0x0000000000017b76 <+102>: mov %eax,%edx
0x0000000000017b78 <+104>: jmp 0x17b43 <drm_dp_aux_dev_get_by_minor+51>
0x0000000000017b7a <+106>: xor %r12d,%r12d
0x0000000000017b7d <+109>: jmp 0x17b5a <drm_dp_aux_dev_get_by_minor+74>
End of assembler dump.
(gdb) list *drm_dp_aux_dev_get_by_minor+0x29
0x17b39 is in drm_dp_aux_dev_get_by_minor (drivers/gpu/drm/drm_dp_aux_dev.c:65).
60 static struct drm_dp_aux_dev *drm_dp_aux_dev_get_by_minor(unsigned index)
61 {
62 struct drm_dp_aux_dev *aux_dev = NULL;
63
64 mutex_lock(&aux_idr_mutex);
65 aux_dev = idr_find(&aux_idr, index);
66 if (!kref_get_unless_zero(&aux_dev->refcount))
67 aux_dev = NULL;
68 mutex_unlock(&aux_idr_mutex);
69
(gdb) p/x &((struct drm_dp_aux_dev *)(0x0))->refcount
$8 = 0x18
Looking at the caller, checks on the minor are pushed down to
drm_dp_aux_dev_get_by_minor()
static int auxdev_open(struct inode *inode, struct file *file)
{
unsigned int minor = iminor(inode);
struct drm_dp_aux_dev *aux_dev;
aux_dev = drm_dp_aux_dev_get_by_minor(minor); <====
if (!aux_dev)
return -ENODEV;
file->private_data = aux_dev;
return 0;
}
Fixes: e94cb37b34eb ("drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers.")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Zwane Mwaikambo <zwane@yosper.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added Cc to stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.2010122231070.38717@montezuma.home
|
|
Changing the caching on the fly never really worked
flawlessly.
So stop this completely and just let drivers specific the
desired caching in the tt or bus object.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394256/
|
|
Instead of the placement flags use the caching of the bus
mapping or tt object for the page protection flags.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394255/
|
|
And implement setting it up correctly in the drivers.
This allows getting rid of the placement flags for this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394254/
|
|
All drivers can determine the tt caching state at creation time,
no need to do this on the fly during every validation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394253/
|
|
Novatek NT36672a is a generic DSI IC that drives command and video mode
panels. Add the driver for it.
Right now adding support for some Poco F1 phones that have an LCD panel
from Tianma connected with this IC, with a resolution of 1080x2246 that
operates in DSI video mode.
During testing, Benni Steini <bennisteinir@gmail.com> helped us fix
the reset sequence timing (from 10ms to 20ms), to get the bootanimation
to work on Android.
With current AOSP, we need to increase it to 200ms - this seems to be a
safe high value to avoid a white screen occasionally.
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benni Steini <bennisteinir@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200902064407.30712-3-sumit.semwal@linaro.org
|
|
Novatek nt36672a is a display driver IC that can drive DSI panel. It
is also present in the Tianma video mode panel, which is a FHD+ panel
with a resolution of 1080x2246 and 6.18 inches size. It is found in
some of the Poco F1 phones.
This patch adds the display driver for the IC, with support added for
this tianma fhd video mode panel.
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200902064407.30712-2-sumit.semwal@linaro.org
|
|
There is import_uuid() function which imports u8 array to the uuid_t.
Use it instead of open coding variant.
This allows to hide the uuid_t internals.
Reviewed-by: David Stevens <stevensd@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201013132714.70973-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This file doesn't need anything provided by <linux/kernel.h>.
All it needs are some types, which are provided by <drm/drm_mode.h>.
Drop unneeded <linux/kernel.h> completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422125201.37618-1-andriy.shevchenko@linux.intel.com
|
|
Eric isn't working on vc4 anymore and I've been working on it, as well as
merging patches for it, recently so let's make it official so I don't miss
patches.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201009074952.11345-1-maxime@cerno.tech
|
|
Kernel test robot reported build errors (undefined references)
that didn't make much sense. After reproducing them, there is also
a Kconfig warning that is the root cause of the build errors, so
fix that Kconfig problem.
Fixes this Kconfig warning:
WARNING: unmet direct dependencies detected for CMA
Depends on [n]: MMU [=n]
Selected by [m]:
- DRM_ASPEED_GFX [=m] && HAS_IOMEM [=y] && DRM [=m] && OF [=y] && (COMPILE_TEST [=y] || ARCH_ASPEED) && HAVE_DMA_CONTIGUOUS [=y]
and these dependent build errors:
(.text+0x10c8c): undefined reference to `start_isolate_page_range'
microblaze-linux-ld: (.text+0x10f14): undefined reference to `test_pages_isolated'
microblaze-linux-ld: (.text+0x10fd0): undefined reference to `undo_isolate_page_range'
Fixes: 76356a966e33 ("drm: aspeed: Clean up Kconfig options")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: linux-mm@kvack.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20201011230131.4922-1-rdunlap@infradead.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
We already have a private data member for maximum display width so
let's use it and get rid of the redundant tilcdc_crtc_max_width().
The LCDC version probing is moved to before reading the device tree
properties so that the version information is available when private
data maximum width is initialized, if "max-width" property is not
found.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/73683d2ce151cffb811a756595b02892eeac3d84.1602349100.git.jsarha@ti.com
|
|
END_OF_FRAME interrupts have been enabled all the time since the
beginning of this driver. It is about time to add this feature.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fb87adebaffe8c7cb4fe7e909a45d47af08d7c6e.1602349100.git.jsarha@ti.com
|
|
There have suggestions to bake pitch alignment, address alignment,
contiguous memory or other placement (hidden VRAM, GTT/BAR, etc)
constraints into modifiers. Last time this was brought up it seemed
like the consensus was to not allow this. Document this in drm_fourcc.h.
There are several reasons for this.
- Encoding all of these constraints in the modifiers would explode the
search space pretty quickly (we only have 64 bits to work with).
- Modifiers need to be unambiguous: a buffer can only have a single
modifier.
- Modifier users aren't expected to parse modifiers (except drivers).
v2: add paragraph about aliases (Daniel)
v3: fix unrelated changes sent with the patch
v4: disambiguate users between driver and higher-level programs (Brian,
Daniel)
v5: fix AFBC example (Brian, Daniel)
v6: remove duplicated paragraph (Daniel)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Marek Olšák <maraeo@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Michel Dänzer <michel@daenzer.net>
Link: https://patchwork.freedesktop.org/patch/msgid/MGwgeXojKNdNXjCxuMhRlwcJM4vdYph_WJcMeGPPGMcRKtHV41XAXlh2tCc-pPJZCAhS3gwbWMWTd8f03NBA2ZYKfr0QxLhcPivpopr5c6M=@emersion.fr
|
|
DRM_GEM_CMA_DRIVER_OPS sets the functions in struct drm_driver
to their defaults. No functional changes are made.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20200603083132.4610-5-tzimmermann@suse.de
|
|
If the CRTC driver ever needs to access the full DRM state, it can't do so
at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state
will have cleared the pointer from the struct drm_crtc_state to the struct
drm_atomic_state before calling those hooks.
In order to allow that, let's pass the full DRM state to atomic_enable and
atomic_disable. The conversion was done using the coccinelle script below,
built tested on all the drivers and actually tested on vc4.
virtual report
@@
struct drm_crtc_helper_funcs *FUNCS;
identifier dev, state;
identifier crtc, crtc_state;
@@
disable_outputs(struct drm_device *dev, struct drm_atomic_state *state)
{
<...
- FUNCS->atomic_disable(crtc, crtc_state);
+ FUNCS->atomic_disable(crtc, state);
...>
}
@@
struct drm_crtc_helper_funcs *FUNCS;
identifier dev, state;
identifier crtc, crtc_state;
@@
drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state)
{
<...
- FUNCS->atomic_enable(crtc, crtc_state);
+ FUNCS->atomic_enable(crtc, state);
...>
}
@@
identifier crtc, old_state;
@@
struct drm_crtc_helper_funcs {
...
- void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+ void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
- void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+ void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
}
@ crtc_atomic_func @
identifier helpers;
identifier func;
@@
(
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_enable = func,
...,
};
|
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
)
@ ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@
void func(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
... when != old_state
}
@ adds_old_state depends on crtc_atomic_func && !ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@
void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
{
+ struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
...
}
@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
expression E;
type T;
@@
void func(...)
{
...
- T state = E;
+ T crtc_state = E;
<+...
- state
+ crtc_state
...+>
}
@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
type T;
@@
void func(...)
{
...
- T state;
+ T crtc_state;
<+...
- state
+ crtc_state
...+>
}
@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
identifier old_state;
identifier crtc;
@@
void func(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_old_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_old_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
|
|
Arguments to GENMASK should be msb >= lsb.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20200222235152.242816-1-megous@megous.com
|
|
These settings are used by an ASPEED BMC to determine when the host is
trying to drive the display over PCIe (vga_pw) and to switch the
output between PCIe and the internal graphics device (dac_mux).
The valid values for the dac mux are:
00: VGA mode (default, aka PCIe)
01: Graphics CRT (aka BMC internal graphics, this driver)
10: Pass through mode from video input port A
11: Pass through mode from video input port B
Values for the read-only vga password register are:
1: Host driving the display
0: Host not driving the display
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916083413.777307-1-joel@jms.id.au
|
|
Instead of manually calculating the structure size.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/394252/
|
|
If more than two jobs end up timeout-ing concurrently, only one of them
(the one attached to the scheduler acquiring the lock) is fully handled.
The other one remains in a dangling state where it's no longer part of
the scheduling queue, but still blocks something in scheduler, leading
to repetitive timeouts when new jobs are queued.
Let's make sure all bad jobs are properly handled by the thread
acquiring the lock.
v3:
- Add Steven's R-b
- Don't take the sched_lock when stopping the schedulers
v2:
- Fix the subject prefix
- Stop the scheduler before returning from panfrost_job_timedout()
- Call cancel_delayed_work_sync() after drm_sched_stop() to make sure
no timeout handlers are in flight when we reset the GPU (Steven Price)
- Make sure we release the reset lock before restarting the
schedulers (Steven Price)
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002122506.1374183-1-boris.brezillon@collabora.com
|
|
Hopefully we'll have the drm crash recorder RSN, but meanwhile
compositors would like to know a bit better why they get an EBUSY.
v2: Move misplaced hunk to the right patch (Pekka)
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925084651.3250104-2-daniel.vetter@ffwll.ch
|
|
When doing an atomic modeset with ALLOW_MODESET drivers are allowed to
pull in arbitrary other resources, including CRTCs (e.g. when
reconfiguring global resources).
But in nonblocking mode userspace has then no idea this happened,
which can lead to spurious EBUSY calls, both:
- when that other CRTC is currently busy doing a page_flip the
ALLOW_MODESET commit can fail with an EBUSY
- on the other CRTC a normal atomic flip can fail with EBUSY because
of the additional commit inserted by the kernel without userspace's
knowledge
For blocking commits this isn't a problem, because everyone else will
just block until all the CRTC are reconfigured. Only thing userspace
can notice is the dropped frames without any reason for why frames got
dropped.
Consensus is that we need new uapi to handle this properly, but no one
has any idea what exactly the new uapi should look like. Since this
has been shipping for years already compositors need to deal no matter
what, so as a first step just try to enforce this across drivers
better with some checks.
v2: Add comments and a WARN_ON to enforce this only when allowed - we
don't want to silently convert page flips into blocking plane updates
just because the driver is buggy.
v3: Fix inverted WARN_ON (Pekka).
v4: Drop the uapi changes, only add a WARN_ON for now to enforce some
rules for drivers.
v5: Make the WARNING more informative (Daniel)
v6: Add unconditional debug output for compositor hackers to figure
out what's going on when they get an EBUSY (Daniel)
v7: Fix up old/new_crtc_state confusion for real (Pekka/Ville)
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
References: https://lists.freedesktop.org/archives/dri-devel/2018-July/182281.html
Bugzilla: https://gitlab.freedesktop.org/wayland/weston/issues/24#note_9568
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925084651.3250104-1-daniel.vetter@ffwll.ch
|
|
We didn't take the kernel_fb_helper_lock mutex, which protects that
code. While at it, simplify the code
- inline the function (originally shared with kgdb I think)
- drop the error tracking and all the complications
- drop the pointless early out, it served nothing
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007133036.1541639-1-daniel.vetter@ffwll.ch
|
|
Drop issues already resolved in vkms:
- CRC API Improvements to [1] add igt test to check extreme alpha values
and [2] alpha blending;
- [3] prime buffer sharing;
- [4] writeback support;
On the other hand, we also found or thought about other improvements since
the last update of this document:
- better support for IGT tests
- improvements to writeback support
- syzbot report
Finally, we reorder items by the assumed complexity.
[1] https://patchwork.freedesktop.org/series/55944/
[2] https://patchwork.freedesktop.org/series/80823/
[3] https://patchwork.freedesktop.org/series/63212/
[4] https://patchwork.freedesktop.org/series/81177/
v2:
- Link to syzbot dashboard
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006223006.gu55pjtuaigkh6il@smtp.gmail.com
|
|
This is not something drivers should use.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/393430/
|
|
That was missed during the cleanup.
v2: fix comment in vmwgfx as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394092/
|
|
It is the sole user of this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/393498/
|
|
We can always access the global state.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/393499/
|
|
Make it more clear what the resource manager function
does and nuke the wrapper function.
v2: nuke the wrapper
v3: fix typo in radeon, rebased
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Link: https://patchwork.freedesktop.org/patch/393914/
|
|
Remove unused parameters, shorten the function name.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/393431/
|
|
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/393429/
|
|
All drivers should have a move callback now so make it compulsory.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006000644.1005758-6-airlied@gmail.com
|
|
This will always do memcpy moves.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006000644.1005758-5-airlied@gmail.com
|
|
This just copies the fallback to vmwgfx, I'm going to iterate on this
a bit until it's not the same as the fallback path.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006000644.1005758-4-airlied@gmail.com
|
|
Both fns checked mem == NULL, just move the check outside.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006000644.1005758-3-airlied@gmail.com
|