summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-10-01netlink: add attributes to fdb interfacestephen hemminger
Later changes need to be able to refer to neighbour attributes when doing fdb_add. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01tg3: unconditionally select HWMON support when tg3 is enabled.Paul Gortmaker
There is the seldom used corner case where HWMON=m at the same time as TIGON3=y (typically randconfigs) which will cause a link fail like: drivers/built-in.o: In function `tg3_close': tg3.c:(.text+0x16bd86): undefined reference to `hwmon_device_unregister' drivers/built-in.o: In function `tg3_hwmon_open': tg3.c:(.text+0x16fc4b): undefined reference to `hwmon_device_register' make[1]: *** [vmlinux] Error 1 Fix it as suggested by DaveM[1] by having the Kconfig logic simply select HWMON when TIGON3 is selected. This gets rid of all the extra IS_ENABLED ifdeffery in tg3.c as a side benefit. [1] http://marc.info/?l=linux-netdev&m=134250573718151&w=2 Cc: Michael Chan <mchan@broadcom.com> Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Anisse Astier <anisse@astier.eu> Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"David S. Miller
This reverts commit d7559982701ac500662b2e8e150ff34f7faf0281. It wasn't meant to be applied, commit 342b7b741d76bc8aadeff844634348bb2a343d19 ("net: ti cpsw ethernet: set IFCTL_A bit in MACCONTROL") was redone in such a way to make this commit unnecessary. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01gre: fix sparse warningstephen hemminger
Use be16 consistently when looking at flags. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01asix: Adds support for Lenovo 10/100 USB dongle.Quinlan Pfiffer
This dongle ships with the X1 Carbon, and has an AX88772B usb to ethernet chip in it. Signed-off-by: Quinlan Pfiffer <qpfiffer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01flexcan: disable bus error interrupts for the i.MX28Wolfgang Grandegger
Due to a bug in most Flexcan cores, the bus error interrupt needs to be enabled. Otherwise we don't get any error warning or passive interrupts. This is _not_ necessary for the i.MX28 and this patch disables bus error interrupts if "berr-reporting" is not requested. This avoids bus error flooding, which might harm, especially on low-end systems. To handle such quirks of the Flexcan cores, a hardware feature flag has been introduced, also replacing the "hw_ver" variable. So far nobody could tell what Flexcan core version is available on what Freescale SOC, apart from the i.MX6Q and P1010, and which bugs or features are present on the various "hw_rev". CC: Hui Wang <jason77.wang@gmail.com> CC: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01net/key/af_key.c: add range checks on ->sadb_x_policy_lenDan Carpenter
Because sizeof() is size_t then if "len" is negative, it counts as a large positive value. The call tree looks like: pfkey_sendmsg() -> pfkey_process() -> pfkey_spdadd() -> parse_ipsecrequests() Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01IB/ipoib: Add more rtnl_link_ops callbacksOr Gerlitz
Add the rtnl_link_ops changelink and fill_info callbacks, through which the admin can now set/get the driver mode, etc policies. Maintain the proprietary sysfs entries only for legacy childs. For child devices, set dev->iflink to point to the parent device ifindex, such that user space tools can now correctly show the uplink relation as done for vlan, macvlan, etc devices. Pointed out by Patrick McHardy <kaber@trash.net> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01net: ti cpsw ethernet: allow reading phy interface mode from DTDaniel Mack
Allow users to specify the phy interface of the CPSW slaves. The new node parameter is called "phy_if_mode" and is optional. The original behaviour of the driver is preserved when not given. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01net: ti cpsw ethernet: set IFCTL_A bit in MACCONTROLDaniel Mack
For RMII/RGMII mode operation in 100Mbps, the CPSW needs to set the IFCTL_A bits in the MACCONTROL register. For all other PHY modes, this bit is unused, so setting it unconditionally shouldn't cause any trouble. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01mlx4: dont orphan skbs in mlx4_en_xmit()Eric Dumazet
After commit e22979d96a55d (mlx4_en: Moving to Interrupts for TX completions) we no longer need to orphan skbs in mlx4_en_xmit() since skb wont stay a long time in TX ring before their release. Orphaning skbs in ndo_start_xmit() should be avoided as much as possible, since it breaks TCP Small Queue or other flow control mechanisms (per socket limits) Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Yevgeny Petrilin <yevgenyp@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01ipv4: gre: add GRO capabilityEric Dumazet
Add GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. Tested using IPv4 and IPv6 TCP traffic inside this tunnel, and checking GRO is building large packets. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01net: add gro_cells infrastructureEric Dumazet
This adds a new include file (include/net/gro_cells.h), to bring GRO (Generic Receive Offload) capability to tunnels, in a modular way. Because tunnels receive path is lockless, and GRO adds a serialization using a napi_struct, I chose to add an array of up to DEFAULT_MAX_NUM_RSS_QUEUES cells, so that multi queue devices wont be slowed down because of GRO layer. skb_get_rx_queue() is used as selector. In the future, we might add optional fanout capabilities, using rxhash for example. With help from Ben Hutchings who reminded me netif_get_num_default_rss_queues() function. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01tcp: gro: add checksuming helpersEric Dumazet
skb with CHECKSUM_NONE cant currently be handled by GRO, and we notice this deep in GRO stack in tcp[46]_gro_receive() But there are cases where GRO can be a benefit, even with a lack of checksums. This preliminary work is needed to add GRO support to tunnels. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01ipv6: del unreachable route when an addr is deleted on loNicolas Dichtel
When an address is added on loopback (ip -6 a a 2002::1/128 dev lo), two routes are added: - one in the local table: local 2002::1 via :: dev lo proto none metric 0 - one the in main table (for the prefix): unreachable 2002::1 dev lo proto kernel metric 256 error -101 When the address is deleted, the route inserted in the main table remains because we use rt6_lookup(), which returns NULL when dst->error is set, which is the case here! Thus, it is better to use ip6_route_lookup() to avoid this kind of filter. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01bnx2x: update version to 1.78.00-0.Yuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01bnx2x,cnic: use FW 7.8.2Yuval Mintz
This patch moves the bnx2x and cnic drivers into using FW 7.8.2 which was recently submitted into the linux-firmware tree. A short summary of minor bugs fixed by this FW: 1. In switch dependent mode, fix several issues regarding inner vlan vs. DCB priorities. 2. iSCSI - not all packets were completed on a forward channel. 3. DCB - fixed for 4-port devices. 4. Fixed false parity reported in CAM memories when operating near -5% on the 1.0V core supply. 5. ETS default settings are set to fairness between traffic classes (rather than strict priority), and uses the same chip receive buffer configuration for both PFC and pause. For a complete list of fixes made by this FW, see commit 236367db in the linux-firmware git repository. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01be2net: fix vfs enumerationIvan Vecera
Current VFs enumeration algorithm used in be_find_vfs does not take domain number into the match. The match found in igb/ixgbe is more elegant and safe. This 2nd version uses pci_physfn instead of checking dev->physfn directly. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01use skb_end_offset() in skb_try_coalesce()Weiping Pan
Commit ec47ea824774(skb: Add inline helper for getting the skb end offset from head) introduces this helper function, skb_end_offset(), we should make use of it. Signed-off-by: Weiping Pan <wpan@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-09-30Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Here is another batch of updates intended for 3.7... Highlights include an hci_connect re-write in Bluetooth, HCI/LLC layer separation in NFC, removal of the raw pn544 NFC driver, NFC LLCP raw sockets support, improved IBSS auth frame handling in mac80211, full-MAC AP mode notification support in mac80211, a lot of attention paid to brcmfmac, and the usual level of updates to iwlwifi, ath9k, mwifiex, and rt2x00, and various other updates. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30be2net: fixup log messagesSathya Perla
Added and modified a few log messages mostly in probe path. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30be2net: cleanup code related to be_link_status_query()Sathya Perla
1) link_status_query() is always called to query the link-speed (speed after applying qos). When there is no qos setting, link-speed is derived from port-speed. Do all this inside this routine and hide this from the callers. 2) adpater->phy.forced_port_speed is not being set anywhere after being initialized. Get rid of this variable. 3) Ignore async link_speed notifications till the initial value has been fetched from FW. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30be2net: fix wrong handling of be_setup() failure in be_probe()Sathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30be2net: remove type argument of be_cmd_mac_addr_query()Sathya Perla
All invocations of this routine use the same type value. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Disable multiple TX rings by default due to hardware flawMichael Chan
Simple round-robin hardware TX scheduling can cause starvation of TX rings with small packets when other TX rings have large TSO or jumbo packets. In the simplest case, consider 2 TCP streams running in opposite directions. The TSO TX traffic will hash to one ring and the ACKs for the incoming data on a different TCP connection will hash to a different TX ring. The hardware fetches one complete TSO packet (up to 64K data) before servicing the other TX ring. When it gets to the other TX ring, it will only fetch one packet (64-byte ACK packet in this case). After that, it will switch back to the 1st ring filled with more TSO packets. Because only one ACK can go out roughly every 500 usec in this case, the incoming data rate becomes very low. Update version to 3.125. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Add support for ethtool -L|-l to get/set the number of rings.Michael Chan
Default remains the same. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Refactor tg3_close()Michael Chan
by introducing tg3_stop() that does the opposite of tg3_start(). This function will be useful when adding the support for changing the numbe of rx and tx rings. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Refactor tg3_open()Michael Chan
by introducing tg3_start() that handles all initialization steps from IRQ allocation. This function will be needed when adding support for changing the number of rx and tx rings. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Separate coalescing setup for rx and txMichael Chan
since the number of rings can be different. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Allow number of rx and tx rings to be set independently.Michael Chan
irq_cnt is no longer necessarily equal to the number rx or tx rings. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Introduce separate functions to allocate/free RX/TX rings.Michael Chan
This is preparation work to allow the number of RX and TX rings to be configured separately. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28ipv6: return errno pointers consistently for fib6_add_1()Lin Ming
fib6_add_1() should consistently return errno pointers, rather than a mixture of NULL and errno pointers. Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller
Marc Kleine-Budde says: ==================== this pull request is for net-next, for the v3.7 release cycle. AnilKumar Ch contributed a fix for a segfault in the c_can driver, which is triggered by an earlier commit [1] in net-next (so no backport is needed). ... [1] 4cdd34b can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc75xx: add wol magic packet supportSteve Glendinning
This patch enables wake from system suspend on magic packet. Patch updated to change BUG_ON to WARN_ON_ONCE. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc75xx: enable power saving mode during system suspendSteve Glendinning
This patch instructs the device to enter its lowest power SUSPEND2 state during system suspend. This patch also explicitly wakes the device after resume, which should address reports of the device not automatically coming back after system suspend: Patch updated to change BUG_ON to WARN_ON_ONCE. http://code.google.com/p/chromium-os/issues/detail?id=31871 Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc75xx: add explicit test that device is READYSteve Glendinning
This patch adds an explicit test that the READY bit is set on the device when attempting to initialize it. If this bit is clear then the device hasn't succesfully started all its clocks, and this patch helps make the resulting logged error more helpful. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: add wol magic packet supportSteve Glendinning
This patch enables wake from system suspend on magic packet. Patch updated to replace BUG_ON with WARN_ON_ONCE and return. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: enable power saving mode during system suspendSteve Glendinning
This patch enables the device to enter its lowest power SUSPEND2 state during system suspend, instead of staying up using full power. Patch updated to not add two pointers to .suspend & .resume. Patch updated to replace BUG_ON with WARN_ON_ONCE and return. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: fix resume when usb device is resetSteve Glendinning
This patch fixes an issue on some systems, where after suspend the link is re-established but the ethernet interface does not resume. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: check return code from control messagesSteve Glendinning
This patch adds additional checks of the values returned by smsc95xx_(read|write)_reg, and wraps their common patterns in macros. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: remove unnecessary variablesSteve Glendinning
Removes unnecessary variables as smsc95xx_write_reg takes its value by parameter. Early versions passed this parameter by reference. Also replace hardcoded interrupt status value with a #define Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: sleep before read for lengthy operationsSteve Glendinning
During init, the device reset is unexpected to complete immediately, so sleep before testing the condition rather than after it. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28ath9k: Fix BTCOEX weight initializationSujith Manoharan
The WLAN/BT weights have to set correctly before BTCOEX is initialized. Currently, this is not done for all chips in the AR9003 family. This patch fixes this issue by setting the weights in the init path. While at it, rename ar9462_wlan_weights to mci_wlan_weights since it is common to both AR9462 and AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: convert to use le16_add_cpu()Wei Yongjun
Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: enhance RX reordering to avoid packet drop during host sleepAvinash Patil
Once hostsleep is activated, this patch takes care of not dropping packets in RX reorder table. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k_hw: Handle AR_INTR_SYNC_HOST1_(FATAL|PERR) on AR9003Sven Eckelmann
Interrupts with the sync_cause AR_INTR_SYNC_HOST1_FATAL and AR_INTR_SYNC_HOST1_PERR have to be handled using a chip reset. Otherwise a interrupt storm with unhandled interrupts will cause a hang or crash of the machine. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: remove brcmf_update_prof() functionArend van Spriel
The function brcmf_update_prof() only add complexity that is not needed. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: remove brcmf_read_prof() functionArend van Spriel
The function brcmf_read_prof() provided access to fields with brcmf_cfg80211_profile structure using a field id, but the calling function can easily access that structure directly. This patch removes the function. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 03:45:12 +0000