summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-05-15Merge branch 'stmmac-platform-glue'David S. Miller
Joachim Eastwood says: ==================== convert stmmac glue layers into platform drivers This patch set aims to convert the current dwmac glue layers into proper platform drivers as request by Arnd[1]. These changes start from patch 3 and onwards. Overview: Platform driver functions like probe and remove are exported from the stmmac platform and then used in subsequent glue later conversions. The conversion involes adding the platform driver boiler plate code and adding it to the build system. The last patch removes the driver from the stmmac platform code thus making it into a library for common platform driver functions. The two first patches adds glue layer for my platform. I chose to first add old style glue layer and then convert it. The churn this creates is just 3 lines. I would be very nice if people could test this patch set on their respective platform. My testing has been limited to compiling and testing on my (LPC18xx) platform. Thanks! Next I will look into cleaning up the stmmac platform code. [1] http://marc.info/?l=linux-arm-kernel&m=143059524606459&w=2 ==================== Tested-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15stmmac: drop driver from stmmac platform codeJoachim Eastwood
The dwmac-generic replaces the driver inside the stmmac platform code. This turns stmmac platform into a library used by drivers for common platform driver functions. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15stmmac: convert dwmac-sunxi to platform driverJoachim Eastwood
Convert platform glue layer into a proper platform driver and add it to the build system. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15stmmac: convert dwmac-sti to platform driverJoachim Eastwood
Convert platform glue layer into a proper platform driver and add it to the build system. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15stmmac: convert dwmac-socfpga to platform driverJoachim Eastwood
Convert platform glue layer into a proper platform driver and add it to the build system. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15stmmac: convert dwmac-rk to platform driverJoachim Eastwood
Convert platform glue layer into a proper platform driver and add it to the build system. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15stmmac: convert dwmac-meson to platform driverJoachim Eastwood
Convert platform glue layer into a proper platform driver and add it to the build system. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15stmmac: convert dwmac-lpc18xx to a platform driverJoachim Eastwood
Convert platform glue layer into a proper platform driver and add it to the build system. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15stmmac: add a generic dwmac driverJoachim Eastwood
Create a new driver around the generic device tree match strings in the stmmac platform code. This driver is intended to be used by all platforms that doesn't require any platform specific code to function or is using platform data. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15stmmac: prepare stmmac platform to support stand alone driversJoachim Eastwood
Prepare the stmmac platform code to support standalone drivers by exporting the need functions and having of_match_device use the match table reference already present in the driver struct. This will allow us to reuse the platform driver functions from this code easily in other stand alone platform drivers. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15doc: dt: add documentation for nxp,lpc1850-dwmacJoachim Eastwood
Add device tree binding documentation for nxp,lpc1850-dwmac. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15stmmac: add dwmac glue for NXP 18xx/43xx familyJoachim Eastwood
Add support for Ethernet on NXP LPC18xx and LPC43xx using the dwmac driver. This glue is required to setup phy interface mode, MII or RMII, on the SoC. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14hv_netvsc: use per_cpu stats to calculate TX/RX datasixiao@microsoft.com
Current code does not lock anything when calculating the TX and RX stats. As a result, the RX and TX data reported by ifconfig are not accuracy in a system with high network throughput and multiple CPUs (in my test, RX/TX = 83% between 2 HyperV VM nodes which have 8 vCPUs and 40G Ethernet). This patch fixed the above issue by using per_cpu stats. netvsc_get_stats64() summarizes TX and RX data by iterating over all CPUs to get their respective stats. This v2 patch addressed David's comments on the cleanup path when netdev_alloc_pcpu_stats() failed. Signed-off-by: Simon Xiao <sixiao@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14test_bpf: fix sparse warningsMichael Holzheu
Fix several sparse warnings like: lib/test_bpf.c:1824:25: sparse: constant 4294967295 is so big it is long lib/test_bpf.c:1878:25: sparse: constant 0x0000ffffffff0000 is so big it is long Fixes: cffc642d93f9 ("test_bpf: add 173 new testcases for eBPF") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14net: core: set qdisc pkt len before tc_classifyFlorian Westphal
commit d2788d34885d4ce5ba ("net: sched: further simplify handle_ing") removed the call to qdisc_enqueue_root(). However, after this removal we no longer set qdisc pkt length. This breaks traffic policing on ingress. This is the minimum fix: set qdisc pkt length before tc_classify. Only setting the length does remove support for 'stab' on ingress, but as Alexei pointed out: "Though it was allowed to add qdisc_size_table to ingress, it's useless. Nothing takes advantage of recomputed qdisc_pkt_len". Jamal suggested to use qdisc_pkt_len_init(), but as Eric mentioned that would result in qdisc_pkt_len_init to no longer get inlined due to the additional 2nd call site. ingress policing is rare and GRO doesn't really work that well with police on ingress, as we see packets > mtu and drop skbs that -- without aggregation -- would still have fitted the policier budget. Thus to have reliable/smooth ingress policing GRO has to be turned off. Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Fixes: d2788d34885d ("net: sched: further simplify handle_ing") Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14netns: fix unbalanced spin_lock on errorNicolas Dichtel
Unlock was missing on error path. Fixes: 95f38411df05 ("netns: use a spin_lock to protect nsid management") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14mdio-gpio: Propagate mii_bus.phy_ignore_ta_maskBert Vermeulen
This also changes mii_bus.phy_mask to u32 for consistency. Signed-off-by: Bert Vermeulen <bert@biot.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14test_bpf: add tests related to BPF_MAXINSNSDaniel Borkmann
Couple of torture test cases related to the bug fixed in 0b59d8806a31 ("ARM: net: delegate filter to kernel interpreter when imm_offset() return value can't fit into 12bits."). I've added a helper to allocate and fill the insn space. Output on x86_64 from my laptop: test_bpf: #233 BPF_MAXINSNS: Maximum possible literals jited:0 7 PASS test_bpf: #234 BPF_MAXINSNS: Single literal jited:0 8 PASS test_bpf: #235 BPF_MAXINSNS: Run/add until end jited:0 11553 PASS test_bpf: #236 BPF_MAXINSNS: Too many instructions PASS test_bpf: #237 BPF_MAXINSNS: Very long jump jited:0 9 PASS test_bpf: #238 BPF_MAXINSNS: Ctx heavy transformations jited:0 20329 20398 PASS test_bpf: #239 BPF_MAXINSNS: Call heavy transformations jited:0 32178 32475 PASS test_bpf: #240 BPF_MAXINSNS: Jump heavy test jited:0 10518 PASS test_bpf: #233 BPF_MAXINSNS: Maximum possible literals jited:1 4 PASS test_bpf: #234 BPF_MAXINSNS: Single literal jited:1 4 PASS test_bpf: #235 BPF_MAXINSNS: Run/add until end jited:1 1625 PASS test_bpf: #236 BPF_MAXINSNS: Too many instructions PASS test_bpf: #237 BPF_MAXINSNS: Very long jump jited:1 8 PASS test_bpf: #238 BPF_MAXINSNS: Ctx heavy transformations jited:1 3301 3174 PASS test_bpf: #239 BPF_MAXINSNS: Call heavy transformations jited:1 24107 23491 PASS test_bpf: #240 BPF_MAXINSNS: Jump heavy test jited:1 8651 PASS Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14tcp: syncookies: extend validity rangeEric Dumazet
Now we allow storing more request socks per listener, we might hit syncookie mode less often and hit following bug in our stack : When we send a burst of syncookies, then exit this mode, tcp_synq_no_recent_overflow() can return false if the ACK packets coming from clients are coming three seconds after the end of syncookie episode. This is a way too strong requirement and conflicts with rest of syncookie code which allows ACK to be aged up to 2 minutes. Perfectly valid ACK packets are dropped just because clients might be in a crowded wifi environment or on another planet. So let's fix this, and also change tcp_synq_overflow() to not dirty a cache line for every syncookie we send, as we are under attack. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Florian Westphal <fw@strlen.de> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14ip_tunnel: Report Rx dropped in ip_tunnel_get_stats64Alexander Duyck
The rx_dropped stat wasn't being reported when ip_tunnel_get_stats64 was called. This was leading to some confusing results in my debug as I was seeing rx_errors increment but no other value which pointed me toward the type of error being seen. This change corrects that by using netdev_stats_to_stats64 to copy all available dev stats instead of just the few that were hand picked. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14packet: fix warnings in rollover lock contentionWillem de Bruijn
Avoid two xchg calls whose return values were unused, causing a warning on some architectures. The relevant variable is a hint and read without mutual exclusion. This fix makes all writers hold the receive_queue lock. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14net: batch of last_rx update avoidance in ethernet drivers.françois romieu
None of those drivers uses last_rx for its own needs. See 4dc89133f49b8cfd77ba7e83f5960aed63aaa99e ("net: add a comment on netdev->last_rx") for reference. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14Merge branch 'phy_turn_around'David S. Miller
Florian Fainelli says: ==================== net: phy: broken turn-around support This is an attempt at solving the broken turn-around problem in a way that is not specific to the mdio-gpio driver, since it affects different kinds of platforms. We cannot make that localized to PHY device drivers because probing the PHY device which has a broken turn-around can fail as early as in get_phy_id(), therefore we need a bit of help from Device Tree/platform_data. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14net: phy: mdio-gpio: Handle phy_ignore_ta_maskFlorian Fainelli
Update mdiobb_read() to read whether the PHY has a broken turn-around, and if it does, ignore it to make the read succeeed. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14of: mdio: Add a "broken-turn-around" propertyFlorian Fainelli
Some Ethernet PHY devices/switches may not properly release the MDIO bus during turn-around time, and fail to drive it low, which can be seen by some controllers as a read failure, while the data clocked in is still correct. Add a boolean property "broken-turn-around" which is parsed by the generic MDIO bus probing code and will set the corresponding bit in the MDIO bus phy_ignore_ta_mask bitmask for MDIO bus drivers to utilize that information. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14net: phy: Add phy_ignore_ta_mask to account for broken turn-aroundFlorian Fainelli
Some PHY devices/switches will not release the turn-around line as they should do at the end of a MDIO transaction. To help with such situations, allow MDIO bus drivers to be made aware of such restrictions. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14tipc: use sock_create_kern interface to create kernel socketYing Xue
After commit eeb1bd5c40ed ("net: Add a struct net parameter to sock_create_kern"), we should use sock_create_kern() to create kernel socket as the interface doesn't reference count struct net any more. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14cls_flower: Fix compile errorBrian Haley
Fix compile error in net/sched/cls_flower.c net/sched/cls_flower.c: In function ‘fl_set_key’: net/sched/cls_flower.c:240:3: error: implicit declaration of function ‘tcf_change_indev’ [-Werror=implicit-function-declaration] err = tcf_change_indev(net, tb[TCA_FLOWER_INDEV]); Introduced in 77b9900ef53ae Fixes: 77b9900ef53ae ("tc: introduce Flower classifier") Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14Merge branch 'tipc-next'David S. Miller
Jon Maloy says: ==================== tipc: some link layer improvements We continue eliminating redundant complexity at the link layer, and add a couple of improvements to the packet sending functionality. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14tipc: add packet sequence number at instant of transmissionJon Paul Maloy
Currently, the packet sequence number is updated and added to each packet at the moment a packet is added to the link backlog queue. This is wasteful, since it forces the code to traverse the send packet list packet by packet when adding them to the backlog queue. It would be better to just splice the whole packet list into the backlog queue when that is the right action to do. In this commit, we do this change. Also, since the sequence numbers cannot now be assigned to the packets at the moment they are added the backlog queue, we do instead calculate and add them at the moment of transmission, when the backlog queue has to be traversed anyway. We do this in the function tipc_link_push_packet(). Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14tipc: improve link congestion algorithmJon Paul Maloy
The link congestion algorithm used until now implies two problems. - It is too generous towards lower-level messages in situations of high load by giving "absolute" bandwidth guarantees to the different priority levels. LOW traffic is guaranteed 10%, MEDIUM is guaranted 20%, HIGH is guaranteed 30%, and CRITICAL is guaranteed 40% of the available bandwidth. But, in the absence of higher level traffic, the ratio between two distinct levels becomes unreasonable. E.g. if there is only LOW and MEDIUM traffic on a system, the former is guaranteed 1/3 of the bandwidth, and the latter 2/3. This again means that if there is e.g. one LOW user and 10 MEDIUM users, the former will have 33.3% of the bandwidth, and the others will have to compete for the remainder, i.e. each will end up with 6.7% of the capacity. - Packets of type MSG_BUNDLER are created at SYSTEM importance level, but only after the packets bundled into it have passed the congestion test for their own respective levels. Since bundled packets don't result in incrementing the level counter for their own importance, only occasionally for the SYSTEM level counter, they do in practice obtain SYSTEM level importance. Hence, the current implementation provides a gap in the congestion algorithm that in the worst case may lead to a link reset. We now refine the congestion algorithm as follows: - A message is accepted to the link backlog only if its own level counter, and all superior level counters, permit it. - The importance of a created bundle packet is set according to its contents. A bundle packet created from messges at levels LOW to CRITICAL is given importance level CRITICAL, while a bundle created from a SYSTEM level message is given importance SYSTEM. In the latter case only subsequent SYSTEM level messages are allowed to be bundled into it. This solves the first problem described above, by making the bandwidth guarantee relative to the total number of users at all levels; only the upper limit for each level remains absolute. In the example described above, the single LOW user would use 1/11th of the bandwidth, the same as each of the ten MEDIUM users, but he still has the same guarantee against starvation as the latter ones. The fix also solves the second problem. If the CRITICAL level is filled up by bundle packets of that level, no lower level packets will be accepted any more. Suggested-by: Gergely Kiss <gergely.kiss@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14tipc: simplify link supervision checkpointingJon Paul Maloy
We change the sequence number checkpointing that is performed by the timer in order to discover if the peer is active. Currently, we store a checkpoint of the next expected sequence number "rcv_nxt" at each timer expiration, and compare it to the current expected number at next timeout expiration. Instead, we now use the already existing field "silent_intv_cnt" for this task. We step the counter at each timeout expiration, and zero it at each valid received packet. If no valid packet has been received from the peer after "abort_limit" number of silent timer intervals, the link is declared faulty and reset. We also remove the multiple instances of timer activation from inside the FSM function "link_state_event()", and now do it at only one place; at the end of the timer function itself. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14tipc: rename fields in struct tipc_linkJon Paul Maloy
We rename some fields in struct tipc_link, in order to give them more descriptive names: next_in_no -> rcv_nxt next_out_no-> snd_nxt fsm_msg_cnt-> silent_intv_cnt cont_intv -> keepalive_intv last_retransmitted -> last_retransm There are no functional changes in this commit. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14tipc: simplify packet sequence number handlingJon Paul Maloy
Although the sequence number in the TIPC protocol is 16 bits, we have until now stored it internally as an unsigned 32 bits integer. We got around this by always doing explicit modulo-65535 operations whenever we need to access a sequence number. We now make the incoming and outgoing sequence numbers to unsigned 16-bit integers, and remove the modulo operations where applicable. We also move the arithmetic inline functions for 16 bit integers to core.h, and the function buf_seqno() to msg.h, so they can easily be accessed from anywhere in the code. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14tipc: simplify include dependenciesJon Paul Maloy
When we try to add new inline functions in the code, we sometimes run into circular include dependencies. The main problem is that the file core.h, which really should be at the root of the dependency chain, instead is a leaf. I.e., core.h includes a number of header files that themselves should be allowed to include core.h. In reality this is unnecessary, because core.h does not need to know the full signature of any of the structs it refers to, only their type declaration. In this commit, we remove all dependencies from core.h towards any other tipc header file. As a consequence of this change, we can now move the function tipc_own_addr(net) from addr.c to addr.h, and make it inline. There are no functional changes in this commit. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14tipc: simplify link timer handlingJon Paul Maloy
Prior to this commit, the link timer has been running at a "continuity interval" of configured link tolerance/4. When a timer wakes up and discovers that there has been no sign of life from the peer during the previous interval, it divides its own timer interval by another factor four, and starts sending one probe per new interval. When the configured link tolerance time has passed without answer, i.e. after 16 unacked probes, the link is declared faulty and reset. This is unnecessary complex. It is sufficient to continue with the original continuity interval, and instead reset the link after four missed probe responses. This makes the timer handling in the link simpler, and opens up for some planned later changes in this area. This commit implements this change. Reviewed-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14tipc: simplify resetting and disabling of bearersJon Paul Maloy
Since commit 4b475e3f2f8e4e241de101c8240f1d74d0470494 ("tipc: eliminate delayed link deletion at link failover") the extra boolean parameter "shutting_down" is not any longer needed for the functions bearer_disable() and tipc_link_delete_list(). Furhermore, the function tipc_link_reset_links(), called from bearer_reset() is now unnecessary. We can just as well delete all the links, as we do in bearer_disable(), and start over with creating new links. This commit introduces those changes. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14Merge branch 'be2net-next'David S. Miller
Venkat Duvvuru says: ==================== be2net: patch-set The following patch set has one new feature addition and two fixes. Patch 1 adds support for hwmon sysfs interface to display board temperature. Board temperature display through ethtool statistics is removed. Patch 2 reports "link down" in a few more error cases which are not handled currently. Patch 3 adds support for os2bmc. OS2BMC feature will allow the server to communicate with the on-board BMC/idrac (Baseboard Management Controller) over the LOM via standard Ethernet. More details are added in the commit log. Please review. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14be2net: Support for OS2BMC.Venkata Duvvuru
OS2BMC feature will allow the server to communicate with the on-board BMC/idrac (Baseboard Management Controller) over the LOM via standard Ethernet. When OS2BMC feature is enabled, the LOM will filter traffic coming from the host. If the destination MAC address matches the iDRAC MAC address, it will forward the packet to the NC-SI side band interface for iDRAC processing. Otherwise, it would send it out on the wire to the external network. Broadcast and multicast packets are sent on the side-band NC-SI channel and on the wire as well. Some of the packet filters are not supported in the NIC and hence driver will identify such packets and will hint the NIC to send those packets to the BMC. This is done by duplicating packets on the management ring. Packets are sent to the management ring, by setting mgmt bit in the wrb header. The NIC will forward the packets on the management ring to the BMC through the side-band NC-SI channel. Please refer to this online document for more details, http://www.dell.com/downloads/global/products/pedge/ os_to_bmc_passthrough_a_new_chapter_in_system_management.pdf Signed-off-by: Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14be2net: Report a "link down" to the stack when a fatal error or fw reset ↵Venkata Duvvuru
happens. When an error (related to HW or FW) is detected on a function, the driver must pro-actively report a "link down" to the stack so that a possible failover can be initiated. This is being done currently only for some HW errors. This patch reports a "link down" even for fatal FW errors and EEH errors. Signed-off-by: Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14be2net: Export board temperature using hwmon-sysfs interface.Venkata Duvvuru
Ethtool statistics is not the right place to display board temperature. This patch adds support to export die temperature of devices supported by be2net driver via the sysfs hwmon interface. Signed-off-by: Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14netfilter: xt_MARK: Add ARP supportZhang Chunyu
Add arpt_MARK to xt_mark. The corresponding userspace update is available at: http://git.netfilter.org/arptables/commit/?id=4bb2f8340783fd3a3f70aa6f8807428a280f8474 Signed-off-by: Zhang Chunyu <zhangcy@cn.fujitsu.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-05-14netfilter: ipset: deinline ip_set_put_extensions()Denys Vlasenko
On x86 allyesconfig build: The function compiles to 489 bytes of machine code. It has 25 callsites. text data bss dec hex filename 82441375 22255384 20627456 125324215 7784bb7 vmlinux.before 82434909 22255384 20627456 125317749 7783275 vmlinux Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> CC: Eric W. Biederman <ebiederm@xmission.com> CC: David S. Miller <davem@davemloft.net> CC: Jan Engelhardt <jengelh@medozas.de> CC: Jiri Pirko <jpirko@redhat.com> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: netfilter-devel@vger.kernel.org Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-05-14netfilter: bridge: free nf_bridge info on xmitFlorian Westphal
nf_bridge information is only needed for -m physdev, so we can always free it after POST_ROUTING. This has the advantage that allocation and free will typically happen on the same cpu. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-05-14netfilter: bridge: neigh_head and physoutdev can't be used at same timeFlorian Westphal
The neigh_header is only needed when we detect DNAT after prerouting and neigh cache didn't have a mac address for us. The output port has not been chosen yet so we can re-use the storage area, bringing struct size down to 32 bytes on x86_64. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-05-14Merge branch 'nf-ingress'David S. Miller
Pablo Neira Ayuso says: ==================== Netfilter ingress support (v4) This is the v4 round of patches to add the Netfilter ingress hook, it basically comes in two steps: 1) Add the CONFIG_NET_INGRESS switch to wrap the ingress static key around it. The idea is to use the same global static key to avoid adding more code to the hot path. 2) Add the Netfilter ingress hook after the tc ingress hook, under the global ingress_needed static key. As I said, the netfilter ingress hook also has its own static key, that is nested under the global static key. Please, see patch 5/5 for performance numbers and more information. I originally started this next round, as it was suggested, exploring the independent static key for netfilter ingress just after tc ingress, but the results that I gathered from that patch are not good for non-users: Result: OK: 6425927(c6425843+d83) usec, 100000000 (60byte,0frags) 15561955pps 7469Mb/sec (7469738400bps) errors: 100000000 this roughly means 500Kpps less performance wrt. the base numbers, so that's the reason why I discarded that approach and I focused on this. The idea of this patchset is to open the window to nf_tables, which comes with features that will work out-of-the-box (once the boiler plate code to support the 'netdev' table family is in place), to avoid repeating myself [1], the most relevant features are: 1) Multi-dimensional key dictionary lookups. 2) Arbitrary stateful flow tables. 3) Transactions and good support for dynamic updates. But there are also interest aspects to consider from userspace, such as the ability to support new layer 2 protocols without kernel updates, a well-defined netlink interface, userspace libraries and utilities for third party applications, among others. I hope we can be happy with this approach. Please, apply. Thanks. [1] http://marc.info/?l=netfilter-devel&m=143033337020328&w=2 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14netfilter: add netfilter ingress hook after handle_ing() under unique static keyPablo Neira
This patch adds the Netfilter ingress hook just after the existing tc ingress hook, that seems to be the consensus solution for this. Note that the Netfilter hook resides under the global static key that enables ingress filtering. Nonetheless, Netfilter still also has its own static key for minimal impact on the existing handle_ing(). * Without this patch: Result: OK: 6216490(c6216338+d152) usec, 100000000 (60byte,0frags) 16086246pps 7721Mb/sec (7721398080bps) errors: 100000000 42.46% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 25.92% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.81% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.62% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.70% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.34% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.44% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch: Result: OK: 6214833(c6214731+d101) usec, 100000000 (60byte,0frags) 16090536pps 7723Mb/sec (7723457280bps) errors: 100000000 41.23% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 26.57% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.72% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.55% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.78% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.06% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.43% kpktgend_0 [kernel.kallsyms] [k] __build_skb * Without this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9269001(c9268821+d179) usec, 100000000 (60byte,0frags) 10788648pps 5178Mb/sec (5178551040bps) errors: 100000000 40.99% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.50% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.77% kpktgend_0 [cls_u32] [k] u32_classify 5.62% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.18% kpktgend_0 [pktgen] [k] pktgen_thread_worker 3.23% kpktgend_0 [kernel.kallsyms] [k] tc_classify 2.97% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 1.83% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.50% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 0.99% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9308218(c9308091+d126) usec, 100000000 (60byte,0frags) 10743194pps 5156Mb/sec (5156733120bps) errors: 100000000 42.01% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.78% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.70% kpktgend_0 [cls_u32] [k] u32_classify 5.46% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.16% kpktgend_0 [pktgen] [k] pktgen_thread_worker 2.98% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.84% kpktgend_0 [kernel.kallsyms] [k] tc_classify 1.96% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.57% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk Note that the results are very similar before and after. I can see gcc gets the code under the ingress static key out of the hot path. Then, on that cold branch, it generates the code to accomodate the netfilter ingress static key. My explanation for this is that this reduces the pressure on the instruction cache for non-users as the new code is out of the hot path, and it comes with minimal impact for tc ingress users. Using gcc version 4.8.4 on: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 [...] L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 8192K Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14net: add CONFIG_NET_INGRESS to enable ingress filteringPablo Neira
This new config switch enables the ingress filtering infrastructure that is controlled through the ingress_needed static key. This prepares the introduction of the Netfilter ingress hook that resides under this unique static key. Note that CONFIG_SCH_INGRESS automatically selects this, that should be no problem since this also depends on CONFIG_NET_CLS_ACT. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14netfilter: add nf_hook_list_active()Pablo Neira
In preparation to have netfilter ingress per-device hook list. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14netfilter: add hook list to nf_hook_statePablo Neira
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>