| Age | Commit message (Collapse) | Author |
|---|
|
The sk's sk_route_caps is set in sctp_packet_config, and later it
only needs to change when traversing the transport_list in a loop,
as the dst might be changed in the tx path.
So move sk_route_caps check and set into sctp_outq_flush_transports
from sctp_packet_transmit. This also fixes a dst leak reported by
Chen Yi:
https://bugzilla.kernel.org/show_bug.cgi?id=212227
As calling sk_setup_caps() in sctp_packet_transmit may also set the
sk_route_caps for the ctrl sock in a netns. When the netns is being
deleted, the ctrl sock's releasing is later than dst dev's deleting,
which will cause this dev's deleting to hang and dmesg error occurs:
unregister_netdevice: waiting for xxx to become free. Usage count = 1
Reported-by: Chen Yi <yiche@redhat.com>
Fixes: bcd623d8e9fa ("sctp: call sk_setup_caps in sctp_packet_transmit instead")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull workqueue tracing fix from Steven Rostedt:
"Fix workqueue trace event unsafe string reference
After adding a verifier to test all strings printed in trace events to
make sure they either point to a string on the ring buffer, or to read
only core kernel memory, it triggered on a workqueue trace event. The
trace event workqueue_queue_work references the allocated name of the
workqueue in the output. If the workqueue is freed before the trace is
read, then the trace will dereference freed memory.
Update the trace event to use the __string(), __assign_str(), and
__get_str() helpers to handle such cases"
* tag 'trace-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
workqueue/tracing: Copy workqueue name to buffer in trace event
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Revert two problematic commits.
Specifics:
- Revert ACPI PM commit that attempted to improve reboot handling on
some systems, but it caused other systems to panic() during reboot
(Josef Bacik)
- Revert PM-runtime commit that attempted to improve the handling of
suppliers during PM-runtime suspend of a consumer device, but it
introduced a race condition potentially leading to unexpected
behavior (Rafael Wysocki)"
* tag 'pm-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PM: runtime: Update device status before letting suppliers suspend"
Revert "PM: ACPI: reboot: Use S5 for reboot"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Three AMD IOMMU patches to fix a boot crash on AMD Stoney systems and
every other AMD IOMMU system booted with 'amd_iommu=off'.
This is a v5.11 regression.
- A Fix for the Tegra IOMMU driver to make sure it detects all IOMMUs
* tag 'iommu-fixes-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/tegra-smmu: Make tegra_smmu_probe_device() to handle all IOMMU phandles
iommu/amd: Keep track of amd_iommu_irq_remap state
iommu/amd: Don't call early_amd_iommu_init() when AMD IOMMU is disabled
iommu/amd: Move Stoney Ridge check to detect_ivrs()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes are various ASoC device/platform-specific
small fixes (including a removal of stale file) while the only common
change is a clk management fix in ASoC simple-card driver.
The rest are the usual HD-audio quirks"
* tag 'sound-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (44 commits)
ALSA: usb-audio: Fix unintentional sign extension issue
ALSA: hda/realtek: fix mute/micmute LEDs for HP 850 G8
ASoC: dt-bindings: fsl_spdif: Add compatible string for new platforms
ASoC: rt711: add snd_soc_component remove callback
ASoC: rt5659: Update MCLK rate in set_sysclk()
ASoC: simple-card-utils: Do not handle device clock
ALSA: hda/realtek: fix mute/micmute LEDs for HP 440 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 840 G8
ALSA: hda/realtek: apply pin quirk for XiaomiNotebook Pro
ALSA: hda/realtek: Apply headset-mic quirks for Xiaomi Redmibook Air
ASoC: mediatek: mt8192: fix tdm out data is valid on rising edge
ALSA: dice: fix null pointer dereference when node is disconnected
ALSA: hda: generic: Fix the micmute led init state
ASoC: qcom: lpass-cpu: Fix lpass dai ids parse
spi: cadence: set cqspi to the driver_data field of struct device
ASoC: SOF: intel: fix wrong poll bits in dsp power down
ASoC: codecs: wcd934x: add a sanity check in set channel map
ASoC: qcom: sdm845: Fix array out of range on rx slim channels
ASoC: qcom: sdm845: Fix array out of bounds access
ASoC: remove remnants of sirf prima/atlas audio codec
...
|
|
Applications that create and extend and write to a file do not
expect to see 0 allocation size. When file is extended,
set its allocation size to a plausible value until we have a
chance to query the server for it. When the file is cached
this will prevent showing an impossible number of allocated
blocks (like 0). This fixes e.g. xfstests 614 which does
1) create a file and set its size to 64K
2) mmap write 64K to the file
3) stat -c %b for the file (to query the number of allocated blocks)
It was failing because we returned 0 blocks. Even though we would
return the correct cached file size, we returned an impossible
allocation size.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
Add a couple of checks to make sure timestamping is on and that the
timestamp value from DMA is valid. This avoids any functional issues
that could come from a misinterpreted time stamp.
One of the functions changed doesn't need a return value added because
there was no value in checking from the calling locations.
While here, fix a couple of reverse christmas tree issues next to
the code being changed.
Fixes: f56e7bba22fa ("igb: Pull timestamp from fragment before adding it to skb")
Fixes: 9cbc948b5a20 ("igb: add XDP support")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The include guard "_E1000_HW_H_" is used by two separate header files in
two different drivers (e1000/e1000_hw.h and igb/e1000_hw.h). Using the
same include guard macro in more than one header file may cause
unexpected behavior from the compiler. Fix this by renaming the
duplicate guard in the igb driver.
Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The include guard "_E1000_HW_H_" is used by header files in three
different drivers (e1000/e1000_hw.h, e1000e/hw.h, and igb/e1000_hw.h).
Using the same include guard macro in more than one header file may
cause unexpected behavior from the compiler. Fix the duplicate include
guard in the e1000e driver by renaming it.
Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
* pm-core:
Revert "PM: runtime: Update device status before letting suppliers suspend"
|
|
Revert commit 44cc89f76464 ("PM: runtime: Update device status
before letting suppliers suspend") that introduced a race condition
into __rpm_callback() which allowed a concurrent rpm_resume() to
run and resume the device prematurely after its status had been
changed to RPM_SUSPENDED by __rpm_callback().
Fixes: 44cc89f76464 ("PM: runtime: Update device status before letting suppliers suspend")
Link: https://lore.kernel.org/linux-pm/24dfb6fc-5d54-6ee2-9195-26428b7ecf8a@intel.com/
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull EFI fixes from Ard Biesheuvel:
"- another missing RT_PROP table related fix, to ensure that the efivarfs
pseudo filesystem fails gracefully if variable services are unsupported
- use the correct alignment for literal EFI GUIDs
- fix a use after unmap issue in the memreserve code"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull NVMe updates from Christoph:
"nvme fixes for 5.12
- fix tag allocation for keep alive
- fix a unit mismatch for the Write Zeroes limits
- various TCP transport fixes (Sagi Grimberg, Elad Grupi)
- fix iosqes and iocqes validation for discovery controllers (Sagi Grimberg)"
* tag 'nvme-5.12-20210319' of git://git.infradead.org/nvme:
nvmet-tcp: fix kmap leak when data digest in use
nvmet: don't check iosqes,iocqes for discovery controllers
nvme-rdma: fix possible hang when failing to set io queues
nvme-tcp: fix possible hang when failing to set io queues
nvme-tcp: fix misuse of __smp_processor_id with preemption enabled
nvme-tcp: fix a NULL deref when receiving a 0-length r2t PDU
nvme: fix Write Zeroes limitations
nvme: allocate the keep alive request using BLK_MQ_REQ_NOWAIT
nvme: merge nvme_keep_alive into nvme_keep_alive_work
nvme-fabrics: only reserve a single tag
|
|
Sites that match init_section_contains() get marked as INIT. For
built-in code init_sections contains both __init and __exit text. OTOH
kernel_text_address() only explicitly includes __init text (and there
are no __exit text markers).
Match what jump_label already does and ignore the warning for INIT
sites. Also see the excellent changelog for commit: 8f35eaa5f2de
("jump_label: Don't warn on __exit jump entries")
Fixes: 9183c3f9ed710 ("static_call: Add inline static call infrastructure")
Reported-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20210318113610.739542434@infradead.org
|
|
The intent is to avoid writing init code after init (because the text
might have been freed). The code is needlessly different between
jump_label and static_call and not obviously correct.
The existing code relies on the fact that the module loader clears the
init layout, such that within_module_init() always fails, while
jump_label relies on the module state which is more obvious and
matches the kernel logic.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20210318113610.636651340@infradead.org
|
|
It turns out that static_call_set_init() does not preserve the other
flags; IOW. it clears TAIL if it was set.
Fixes: 9183c3f9ed710 ("static_call: Add inline static call infrastructure")
Reported-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20210318113610.519406371@infradead.org
|
|
Vitaly ran into an issue with hotplugging CPU0 on an Amazon instance where
the matrix allocator claimed to be out of vectors. He analyzed it down to
the point that IRQ2, the PIC cascade interrupt, which is supposed to be not
ever routed to the IO/APIC ended up having an interrupt vector assigned
which got moved during unplug of CPU0.
The underlying issue is that IRQ2 for various reasons (see commit
af174783b925 ("x86: I/O APIC: Never configure IRQ2" for details) is treated
as a reserved system vector by the vector core code and is not accounted as
a regular vector. The Amazon BIOS has an routing entry of pin2 to IRQ2
which causes the IO/APIC setup to claim that interrupt which is granted by
the vector domain because there is no sanity check. As a consequence the
allocation counter of CPU0 underflows which causes a subsequent unplug to
fail with:
[ ... ] CPU 0 has 4294967295 vectors, 589 available. Cannot disable CPU
There is another sanity check missing in the matrix allocator, but the
underlying root cause is that the IO/APIC code lost the IRQ2 ignore logic
during the conversion to irqdomains.
For almost 6 years nobody complained about this wreckage, which might
indicate that this requirement could be lifted, but for any system which
actually has a PIC IRQ2 is unusable by design so any routing entry has no
effect and the interrupt cannot be connected to a device anyway.
Due to that and due to history biased paranoia reasons restore the IRQ2
ignore logic and treat it as non existent despite a routing entry claiming
otherwise.
Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces")
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210318192819.636943062@linutronix.de
|
|
The ioctl KVM_SET_BOOT_CPU_ID fails when called after vcpu creation.
Add this explanation in the documentation.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210319091650.11967-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 494c704f9af0 ("efi: Use 32-bit alignment for efi_guid_t") updated
the type definition of efi_guid_t to ensure that it always appears
sufficiently aligned (the UEFI spec is ambiguous about this, but given
the fact that its EFI_GUID type is defined in terms of a struct carrying
a uint32_t, the natural alignment is definitely >= 32 bits).
However, we missed the EFI_GUID() macro which is used to instantiate
efi_guid_t literals: that macro is still based on the guid_t type,
which does not have a minimum alignment at all. This results in warnings
such as
In file included from drivers/firmware/efi/mokvar-table.c:35:
include/linux/efi.h:1093:34: warning: passing 1-byte aligned argument to
4-byte aligned parameter 2 of 'get_var' may result in an unaligned pointer
access [-Walign-mismatch]
status = get_var(L"SecureBoot", &EFI_GLOBAL_VARIABLE_GUID, NULL, &size,
^
include/linux/efi.h:1101:24: warning: passing 1-byte aligned argument to
4-byte aligned parameter 2 of 'get_var' may result in an unaligned pointer
access [-Walign-mismatch]
get_var(L"SetupMode", &EFI_GLOBAL_VARIABLE_GUID, NULL, &size, &setupmode);
The distinction only matters on CPUs that do not support misaligned loads
fully, but 32-bit ARM's load-multiple instructions fall into that category,
and these are likely to be emitted by the compiler that built the firmware
for loading word-aligned 128-bit GUIDs from memory
So re-implement the initializer in terms of our own efi_guid_t type, so that
the alignment becomes a property of the literal's type.
Fixes: 494c704f9af0 ("efi: Use 32-bit alignment for efi_guid_t")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1327
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In the for loop in efi_mem_reserve_persistent(), prsv = rsv->next
use the unmapped rsv. Use the unmapped pages will cause segment
fault.
Fixes: 18df7577adae6 ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
If CONFIG_CIFS_ROOT is not set, rootfs mount option is invalid
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org> # v5.11
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A typo is found out by codespell tool in 251th lines of cifs_swn.c:
$ codespell ./fs/cifs/
./cifs_swn.c:251: funciton ==> function
Fix a typo found by codespell.
Signed-off-by: Liu xuzhi <liu.xuzhi@zte.com.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Let's drop the pr_err()s from sel_make_policy_nodes() and just add one
pr_warn_ratelimited() call to the sel_make_policy_nodes() error path in
sel_write_load().
Changing from error to warning makes sense, since after 02a52c5c8c3b
("selinux: move policy commit after updating selinuxfs"), this error
path no longer leads to a broken selinuxfs tree (it's just kept in the
original state and policy load is aborted).
I also added _ratelimited to be consistent with the other prtin in the
same function (it's probably not necessary, but can't really hurt...
there are likely more important error messages to be printed when
filesystem entry creation starts erroring out).
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Commit 02a52c5c8c3b ("selinux: move policy commit after updating
selinuxfs") moved the selinux_policy_commit() call out of
security_load_policy() into sel_write_load(), which caused a subtle yet
rather serious bug.
The problem is that security_load_policy() passes a reference to the
convert_params local variable to sidtab_convert(), which stores it in
the sidtab, where it may be accessed until the policy is swapped over
and RCU synchronized. Before 02a52c5c8c3b, selinux_policy_commit() was
called directly from security_load_policy(), so the convert_params
pointer remained valid all the way until the old sidtab was destroyed,
but now that's no longer the case and calls to sidtab_context_to_sid()
on the old sidtab after security_load_policy() returns may cause invalid
memory accesses.
This can be easily triggered using the stress test from commit
ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve
performance"):
```
function rand_cat() {
echo $(( $RANDOM % 1024 ))
}
function do_work() {
while true; do
echo -n "system_u:system_r:kernel_t:s0:c$(rand_cat),c$(rand_cat)" \
>/sys/fs/selinux/context 2>/dev/null || true
done
}
do_work >/dev/null &
do_work >/dev/null &
do_work >/dev/null &
while load_policy; do echo -n .; sleep 0.1; done
kill %1
kill %2
kill %3
```
Fix this by allocating the temporary sidtab convert structures
dynamically and passing them among the
selinux_policy_{load,cancel,commit} functions.
Fixes: 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs")
Cc: stable@vger.kernel.org
Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: merge fuzz in security.h and services.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
If sel_make_policy_nodes() fails, we should jump to 'out', not 'out1',
as the latter would incorrectly log an MAC_POLICY_LOAD audit record,
even though the policy hasn't actually been reloaded. The 'out1' jump
label now becomes unused and can be removed.
Fixes: 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Set the disconnected flag before releasing the data interface in case
netdev registration fails to avoid having the disconnect callback try to
deregister the never registered netdev (and trigger a WARN_ON()).
Fixes: 87cf65601e17 ("USB host CDC Phonet network interface driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Several patches to testore use of memory barriers instead of RCU to
ensure consistent access to ruleset, from Mark Tomlinson.
2) Fix dump of expectation via ctnetlink, from Florian Westphal.
3) GRE helper works for IPv6, from Ludovic Senecaux.
4) Set error on unsupported flowtable flags.
5) Use delayed instead of deferrable workqueue in the flowtable,
from Yinjun Zhang.
6) Fix spurious EEXIST in case of add-after-delete flowtable in
the same batch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes pull, pretty small set of fixes, a couple of i915 and
amdgpu, one ttm, one nouveau and one omap. Probably smaller than usual
for this time, so we'll see if something pops up next week or if this
will continue to stay small.
Summary:
ttm:
- Make ttm_bo_unpin() not wraparound on too many unpins
omap:
- Fix coccicheck warning in omap
amdgpu:
- DCN 3.0 gamma fixes
- DCN 2.1 corrupt screen fix
i915:
- Workaround async flip + VT-d frame corruption on HSW/BDW
- Fix NMI watchdog crash due to uninitialized OA buffer use on gen12+
nouveau:
- workaround oops with bo syncing"
* tag 'drm-fixes-2021-03-19' of git://anongit.freedesktop.org/drm/drm:
nouveau: Skip unvailable ttm page entries
drm/amd/display: Remove MPC gamut remap logic for DCN30
drm/amd/display: Correct algorithm for reversed gamma
drm/omap: dsi: fix unsigned expression compared with zero
i915/perf: Start hrtimer only if sampling the OA buffer
drm/i915: Workaround async flip + VT-d corruption on HSW/BDW
drm/amd/display: Copy over soc values before bounding box creation
drm/ttm: make ttm_bo_unpin more defensive
|
|
Starting with commit f295c8cfec833c2707ff1512da10d65386dde7af
("drm/nouveau: fix dma syncing warning with debugging on.")
the following oops occures:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 6 PID: 1013 Comm: Xorg.bin Tainted: G E 5.11.0-desktop-rc0+ #2
Hardware name: Acer Aspire VN7-593G/Pluto_KLS, BIOS V1.11 08/01/2018
RIP: 0010:nouveau_bo_sync_for_device+0x40/0xb0 [nouveau]
Call Trace:
nouveau_bo_validate+0x5d/0x80 [nouveau]
nouveau_gem_ioctl_pushbuf+0x662/0x1120 [nouveau]
? nouveau_gem_ioctl_new+0xf0/0xf0 [nouveau]
drm_ioctl_kernel+0xa6/0xf0 [drm]
drm_ioctl+0x1f4/0x3a0 [drm]
? nouveau_gem_ioctl_new+0xf0/0xf0 [nouveau]
nouveau_drm_ioctl+0x50/0xa0 [nouveau]
__x64_sys_ioctl+0x7e/0xb0
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
---[ end trace ccfb1e7f4064374f ]---
RIP: 0010:nouveau_bo_sync_for_device+0x40/0xb0 [nouveau]
The underlying problem is not introduced by the commit, yet it uncovered the
underlying issue. The cited commit relies on valid pages. This is not given for
due to some bugs. For now, just warn and work around the issue by just ignoring
the bad ttm objects.
Below is some debug info gathered while debugging this issue:
nouveau 0000:01:00.0: DRM: ttm_dma->num_pages: 2048
nouveau 0000:01:00.0: DRM: ttm_dma->pages is NULL
nouveau 0000:01:00.0: DRM: ttm_dma: 00000000e96058e7
nouveau 0000:01:00.0: DRM: ttm_dma->page_flags:
nouveau 0000:01:00.0: DRM: ttm_dma: Populated: 1
nouveau 0000:01:00.0: DRM: ttm_dma: No Retry: 0
nouveau 0000:01:00.0: DRM: ttm_dma: SG: 256
nouveau 0000:01:00.0: DRM: ttm_dma: Zero Alloc: 0
nouveau 0000:01:00.0: DRM: ttm_dma: Swapped: 0
Signed-off-by: Tobias Klausmann <tobias.klausmann@freenet.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210313222159.3346-1-tobias.klausmann@freenet.de
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.12-rc4:
- Workaround async flip + VT-d frame corruption on HSW/BDW
- Fix NMI watchdog crash due to uninitialized OA buffer use on gen12+
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87blbg8y5t.fsf@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amdgpu:
- DCN 3.0 gamma fixes
- DCN 2.1 corrupt screen fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318042858.3810-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.12-rc4:
- Make ttm_bo_unpin() not wraparound on too many unpins.
- Fix coccicheck warning in omap.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a0e13bbb-6ba6-ff24-4db8-0e02e605de18@linux.intel.com
|
|
__dev_alloc_name(), when supplied with a name containing '%d',
will search for the first available device number to generate a
unique device name.
Since commit ff92741270bf8b6e78aa885f166b68c7a67ab13a ("net:
introduce name_node struct to be used in hashlist") network
devices may have alternate names. __dev_alloc_name() does take
these alternate names into account, possibly generating a name
that is already taken and failing with -ENFILE as a result.
This demonstrates the bug:
# rmmod dummy 2>/dev/null
# ip link property add dev lo altname dummy0
# modprobe dummy numdummies=1
modprobe: ERROR: could not insert 'dummy': Too many open files in system
Instead of creating a device named dummy1, modprobe fails.
Fix this by checking all the names in the d->name_node list, not just d->name.
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Fixes: ff92741270bf ("net: introduce name_node struct to be used in hashlist")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support")
removed last selector of CONFIG_MV64X60.
As it is not a user selectable config item, all references to it
are stale. Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hariprasad Kelam says:
====================
octeontx2: miscellaneous fixes
This series of patches fixes various issues related to NPC MCAM entry
management, debugfs, devlink, CGX LMAC mapping, RSS config etc
Change-log:
v2:
Fixed below review comments
- corrected Fixed tag syntax with 12 digits SHA1
and providing space between SHA1 and subject line
- remove code improvement patch
- make commit description more clear
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initialize l4_key_offset variable to fix uninitialized
variable compiler warning.
Fixes: b9b7421a01d8 ("octeontx2-af: Support ESP/AH RSS hashing")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
unmapping npc counter works in a way by traversing all mcam
entries to find which mcam rule is associated with counter.
But loop cursor variable 'entry' is not incremented before
checking next mcam entry which resulting in infinite loop.
This in turn hogs the kworker thread forever and no other
mbox message is processed by AF driver after that.
Fix this by updating entry value before checking next
mcam entry.
Fixes: a958dd59f9ce ("octeontx2-af: Map or unmap NPC MCAM entry and counter")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RSS configuration can not be get/set when interface is in down state
as they required mbox communication. RSS enable flag status
is used for set/get configuration. Current code do not clear the
RSS enable flag on interface down which lead to mbox error while
trying to set/get RSS configuration.
Fixes: 85069e95e531 ("octeontx2-pf: Receive side scaling support")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current devlink code try to free already freed irqs as the
irq_allocate flag is not cleared after free leading to kernel
crash while removing rvu driver. The patch fixes the irq free
sequence and clears the irq_allocate flag on free.
Fixes: 7304ac4567bc ("octeontx2-af: Add mailbox IRQ and msg handlers")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CGX receive buffer size is a constant value and
cannot be read from CGX0 block always since
CGX0 may not enabled everytime. Hence return CGX
receive buffer size from first enabled CGX block
instead of CGX0.
Fixes: 6e54e1c5399a ("octeontx2-af: cn10K: MTU configuration")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MKEX profile describes what packet fields need to be extracted from
the input packet and how to place those packet fields in the output key
for MCAM matching. The MKEX profile can be in a way where higher layer
packet fields can overwrite lower layer packet fields in output MCAM
Key.
Hence MKEX profile is always ensured that there are no overlaps between
any of the layers. But the commit 42006910b5ea
("octeontx2-af: cleanup KPU config data") introduced TX TOS field which
overlaps with DMAC in MCAM key.
This led to AF driver returning error when TX rule is installed with
DMAC as match criteria since DMAC gets overwritten and cannot be
supported. This patch fixes the issue by removing TOS field from MKEX TX
profile.
Fixes: 42006910b5ea ("octeontx2-af: cleanup KPU config data")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the existing rsrc_alloc's format, there is misalignment for the
pcifunc entries whose VF's index is a double digit. This patch fixes
this.
pcifunc NPA NIX0 NIX1 SSO GROUP SSOWS
TIM CPT0 CPT1 REE0 REE1
PF0:VF0 8 5
PF0:VF1 9 3
PF0:VF10 18 10
PF0:VF11 19 8
PF0:VF12 20 11
PF0:VF13 21 9
PF0:VF14 22 12
PF0:VF15 23 10
PF1 0 0
Fixes: 23205e6d06d4 ("octeontx2-af: Dump current resource provisioning status")
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the ETHTOOL_GRXCLSRLALL ioctl ethtool uses
below structure to read number of rules from the driver.
struct ethtool_rxnfc {
__u32 cmd;
__u32 flow_type;
__u64 data;
struct ethtool_rx_flow_spec fs;
union {
__u32 rule_cnt;
__u32 rss_context;
};
__u32 rule_locs[0];
};
Driver must not modify rule_cnt member. But currently driver
modifies it by modifying rss_context. Hence fix it by using a
local variable.
Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"There are still regressions being found and fixed in the zoned mode
and subpage code, the rest are fixes for bugs reported by users.
Regressions:
- subpage block support:
- readahead works on the proper block size
- fix last page zeroing
- zoned mode:
- linked list corruption for tree log
Fixes:
- qgroup leak after falloc failure
- tree mod log and backref resolving:
- extent buffer cloning race when resolving backrefs
- pin deleted leaves with active tree mod log users
- drop debugging flag from slab cache"
* tag 'for-5.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: always pin deleted leaves when there are active tree mod log users
btrfs: fix race when cloning extent buffer during rewind of an old root
btrfs: fix slab cache flags for free space tree bitmap
btrfs: subpage: make readahead work properly
btrfs: subpage: fix wild pointer access during metadata read failure
btrfs: zoned: fix linked list corruption after log root tree allocation failure
btrfs: fix qgroup data rsv leak caused by falloc failure
btrfs: track qgroup released data in own variable in insert_prealloc_file_extent
btrfs: fix wrong offset to zero out range beyond i_size
|
|
Pull VFIO fixes from Alex Williamson:
- Fix 32-bit issue with new unmap-all flag (Steve Sistare)
- Various Kconfig changes for better coverage (Jason Gunthorpe)
- Fix to batch pinning support (Daniel Jordan)
* tag 'vfio-v5.12-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: fix vaddr_get_pfns() return in vfio_pin_page_external()
vfio: Depend on MMU
ARM: amba: Allow some ARM_AMBA users to compile with COMPILE_TEST
vfio-platform: Add COMPILE_TEST to VFIO_PLATFORM
vfio: IOMMU_API should be selected
vfio/type1: fix unmap all on ILP32
|
|
Pull xfs fixes from Darrick Wong:
"A couple of minor corrections for the new idmapping functionality, and
a fix for a theoretical hang that could occur if we decide to abort a
mount after dirtying the quota inodes.
Summary:
- Fix quota accounting on creat() when id mapping is enabled
- Actually reclaim dirty quota inodes when mount fails
- Typo fixes for documentation
- Restrict both bulkstat calls on idmapped/namespaced mounts"
* tag 'xfs-5.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: also reject BULKSTAT_SINGLE in a mount user namespace
docs: ABI: Fix the spelling oustanding to outstanding in the file sysfs-fs-xfs
xfs: force log and push AIL to clear pinned inodes when aborting mount
xfs: fix quota accounting when a mount is idmapped
|
|
Since commit 8e850f25b581 ("net: socionext: Stop PHY before resetting
netsec") netsec_netdev_init() power downs phy before resetting the
controller. However, the state is not restored once the reset is
complete. As a result it is not possible to bring up network on a
platform with Broadcom BCM5482 phy.
Fix the issue by restoring phy power state after controller reset is
complete.
Fixes: 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec")
Cc: stable@vger.kernel.org
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull virtio fixes from Michael Tsirkin:
"Some fixes and cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails
vhost-vdpa: fix use-after-free of v->config_ctx
vhost: Fix vhost_vq_reset()
vhost_vdpa: fix the missing irq_bypass_unregister_producer() invocation
vdpa_sim: Skip typecasting from void*
virtio: remove export for virtio_config_{enable, disable}
virtio-mmio: Use to_virtio_mmio_device() to simply code
vdpa: set the virtqueue num during register
|
|
This reverts commit 6af1799aaf3f1bc8defedddfa00df3192445bbf3.
Commit 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped
source address") introduced an input check against v4mapped addresses.
Use of such addresses on the wire is indeed questionable and not
allowed on public Internet. As the commit pointed out
https://tools.ietf.org/html/draft-itojun-v6ops-v4mapped-harmful-02
lists potential issues.
Unfortunately there are applications which use v4mapped addresses,
and breaking them is a clear regression. For example v4mapped
addresses (or any semi-valid addresses, really) may be used
for uni-direction event streams or packet export.
Since the issue which sparked the addition of the check was with
TCP and request_socks in particular push the check down to TCPv6
and DCCP. This restores the ability to receive UDPv6 packets with
v4mapped address as the source.
Keep using the IPSTATS_MIB_INHDRERRORS statistic to minimize the
user-visible changes.
Fixes: 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped source address")
Reported-by: Sunyi Shao <sunyishao@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 997acaf6b4b59c (lockdep: report broken irq restoration), the guest
splatting below during boot:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 1 PID: 169 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x26/0x30
Modules linked in: hid_generic usbhid hid
CPU: 1 PID: 169 Comm: systemd-udevd Not tainted 5.11.0+ #25
RIP: 0010:warn_bogus_irq_restore+0x26/0x30
Call Trace:
kvm_wait+0x76/0x90
__pv_queued_spin_lock_slowpath+0x285/0x2e0
do_raw_spin_lock+0xc9/0xd0
_raw_spin_lock+0x59/0x70
lockref_get_not_dead+0xf/0x50
__legitimize_path+0x31/0x60
legitimize_root+0x37/0x50
try_to_unlazy_next+0x7f/0x1d0
lookup_fast+0xb0/0x170
path_openat+0x165/0x9b0
do_filp_open+0x99/0x110
do_sys_openat2+0x1f1/0x2e0
do_sys_open+0x5c/0x80
__x64_sys_open+0x21/0x30
do_syscall_64+0x32/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
The new consistency checking, expects local_irq_save() and
local_irq_restore() to be paired and sanely nested, and therefore expects
local_irq_restore() to be called with irqs disabled.
The irqflags handling in kvm_wait() which ends up doing:
local_irq_save(flags);
safe_halt();
local_irq_restore(flags);
instead triggers it. This patch fixes it by using
local_irq_disable()/enable() directly.
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1615791328-2735-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
