summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-12Merge branch 'fix' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
2011-08-12Merge branch 'imx-fixes-for-arnd' of ↵Arnd Bergmann
git://git.pengutronix.de/git/imx/linux-2.6 into fixes
2011-08-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) e1000e: increase driver version number e1000e: alternate MAC address update e1000e: do not disable receiver on 82574/82583 e1000e: alternate MAC address does not work on device id 0x1060 PCnet: Fix section mismatch bnx2x: disable dcb on 578xx since not supported yet bnx2x: properly clean indirect addresses bnx2x: prevent race between undi_unload and load flows bnx2x: fix select_queue when FCoE is disabled bnx2x: init FCOE FP only once ipv4: some rt_iif -> rt_route_iif conversions net/bridge/netfilter/ebtables.c: use available error handling code net/netlabel/netlabel_kapi.c: add missing cleanup code net/irda: sh_sir: tidyup compile warning net/irda: sh_sir: add missing header net/irda: sh_irda: add missing header slcan: ldisc generated skbs are received in softirq context scm: Capture the full credentials of the scm sender tcp: initialize variable ecn_ok in syncookies path drivers/net/wireless/wl1251: add missing kfree ...
2011-08-12usb: musb: gadget: fix error pathSebastian Andrzej Siewior
In case one "forgot" to load the receiver i.e. doing |modprobe omap2430 |modprobe musb_hdrc he ends up with: |musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) |HS USB OTG: no transceiver configured |musb-hdrc musb-hdrc: musb_init_controller failed with status -19 |(NULL device *): gadget not registered. |Unable to handle kernel NULL pointer dereference at virtual address 0000001c |Internal error: Oops: 17 [#1] SMP |[<c011383c>] (sysfs_find_dirent+0x4/0x60) from [<c01138c0>] (sysfs_get_dirent+0x28/0x78) |[<c01138c0>] (sysfs_get_dirent+0x28/0x78) from [<c0115b78>] (sysfs_unmerge_group+0x1c/0x90) |[<c0115b78>] (sysfs_unmerge_group+0x1c/0x90) from [<c0179ba4>] (dpm_sysfs_remove+0x14/0x3c) |[<c0179ba4>] (dpm_sysfs_remove+0x14/0x3c) from [<c01742f8>] (device_del+0x40/0x1b4) |[<c01742f8>] (device_del+0x40/0x1b4) from [<c0174478>] (device_unregister+0xc/0x18) |[<c0174478>] (device_unregister+0xc/0x18) from [<bf0489b4>] (musb_free+0x24/0x88 [musb_hdrc]) |[<bf0489b4>] (musb_free+0x24/0x88 [musb_hdrc]) from [<bf057d18>] (musb_probe+0xb50/0xe3c [musb_hdrc]) |[<bf057d18>] (musb_probe+0xb50/0xe3c [musb_hdrc]) from [<c01779c4>] (platform_drv_probe+0x1c/0x24) The problem is that musb_free() tries to figure out what was initializued and what wasn't and clean up only the initialized part. This works well for usb_del_gadget_udc() but device_unregister() can't deal with it. Therefore we rely on the fact the we always have a parent device and only then remove the device. I broke this in 0f91349 ("usb: gadget: convert all users to the new udc infrastructure") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: gadget: f_phonet: unlock in error caseSebastian Andrzej Siewior
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: blackfin: include prefetch head fileBob Liu
After the prefetch/list.h restructure, drivers need to explicitly include linux/prefetch.h in order to use the prefetch() function. Otherwise, the current driver fails to build: drivers/usb/musb/blackfin.c: In function 'musb_write_fifo': drivers/usb/musb/blackfin.c:43: error: implicit declaration of function 'prefetch' Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: tusb6010: fix compilationFelipe Balbi
earlier commits have broken compilation of tusb6010 glue layer, fix it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: gadget: renesas_usbhs: fix DMA build by including dma-mapping.hKuninori Morimoto
Include dma-mapping.h to fix build of the renesas_usbhs driver | CC drivers/usb/renesas_usbhs/mod_gadget.o | drivers/usb/renesas_usbhs/mod_gadget.c: In function 'usbhsg_dma_map': | drivers/usb/renesas_usbhs/mod_gadget.c:190: error: implicit declaration of function 'dma_map_single' | drivers/usb/renesas_usbhs/mod_gadget.c:192: error: implicit declaration of function 'dma_sync_single_for_device' | drivers/usb/renesas_usbhs/mod_gadget.c:196: error: implicit declaration of function 'dma_mapping_error' | drivers/usb/renesas_usbhs/mod_gadget.c: In function 'usbhsg_dma_unmap': | drivers/usb/renesas_usbhs/mod_gadget.c:217: error: implicit declaration of function 'dma_unmap_single' | drivers/usb/renesas_usbhs/mod_gadget.c:219: error: implicit declaration of function 'dma_sync_single_for_cpu' | make[5]: *** [drivers/usb/renesas_usbhs/mod_gadget.o] Error 1 | make[4]: *** [drivers/usb/renesas_usbhs] Error 2 Reported-by: Magnus Damm <damm@opensource.se> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: cppi: fix build errors due to DBG and missing musb variablePer Forlin
Replace DBG with dev_dbg and fix invalid access of musb->controller. With this patch cppi_dma builds successfully. Cc: <stable@kernel.org> Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: ux500: replace missing DBG with dev_dbgPer Forlin
ux500_dma.c fail to compile becase DBG has been removed from musb_debug. Use dev_dbg for all prints. Cc: stable@vger.kernel.org Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Mian Yousaf Kaukab<mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: ux500: set dma config for both src and dstPer Forlin
The dma driver requires both src and dst to be set. This fix is needed in order to run gadget mass storage. Patch is verified on snowball. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: fix oops on musb_gadget_pullupJohn Stultz
an 'unhandled fault' is causes when a gadget driver calls usb_gadget_connect() while the USB cable isn't plugged into the OTG port. the fault is caused by an access to MUSB's memory space while its clock is turned off due to pm_runtime kicking in. in order to fix the fault, we enclose musb_gadget_pullup() with pm_runtime_get_sync() ... pm_runtime_put() calls to be sure we will always reach that path with clock turned on. [ balbi@ti.com : simplified commit log; removed few things which didn't belong there ] Cc: stable@kernel.org Reported-by: Zach Pfeffer <zach.pfeffer@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: host: ehci-omap: fix .remove and failure handling path of .probe(v1)Ming Lei
Obviously, disabling & put regulator and iounmap(hcd->regs) are missed in .remove and failure handling path of .probe, so add them. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Keshava Munegowda <Keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: gadget: hid: don't STALL when processing a HID Descriptor requestSebastian Bauer
This is a patch to fix an issue with the HID gadget which, at the moment, returns STALL on a HID descriptor request. Essentially, the patch changes the hid gadget such that a request for the HID descriptor is handled by copying the descriptor into the response buffer, rather than falling through the default case, in which the request is answered by a STALL. Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: fix KconfigRabin Vincent
After 622859634 (usb: musb: drop a gigantic amount of ifdeferry): - USB_GADGET_MUSB_HDRC is no longer selectable because it depends on the removed USB_MUSB_PERIPHERAL and USB_MUSB_OTG options - The Kconfig comment still says "Enable Host or Gadget support to see Inventra options", even though you now need to enable both of them to see Inventra options. Fix the dependency and drop the anyway unnecessary comment. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: tusb6010_omap: fix build failure: error: 'musb' undeclaredSergei Trofimovich
CC drivers/usb/musb/tusb6010_omap.o drivers/usb/musb/tusb6010_omap.c: In function 'tusb_omap_use_shared_dmareq': drivers/usb/musb/tusb6010_omap.c:92: error: 'musb' undeclared (first use in this function) drivers/usb/musb/tusb6010_omap.c:92: error: (Each undeclared identifier is reported only once drivers/usb/musb/tusb6010_omap.c:92: error: for each function it appears in.) Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: gadget: composite: fix bMaxPacketSize for SuperSpeedSebastian Andrzej Siewior
For bMaxPacketSize0 we usually take what is specified in ep0->maxpacket. This is fine in most cases, however on SuperSpeed bMaxPacketSize0 specifies the exponent instead of the actual size in bytes. The only valid value on SS is 9 which denotes 512 bytes. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: gadget: fusb300: remove #if 0 blockSebastian Andrzej Siewior
The code in this block is unused and the Author is fine with removing: | These functions were used to debug unstable hw fifo while developing | fusb300. It's much more stable now. | So these functions can be removed. Cc: "Wendy Yuan-Hsin Chen" <yhchen@faraday-tech.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: gadget: s3c2410_udc: fix unterminated platform_device_id tableAxel Lin
platform_device_id structures need a NULL terminating entry, add it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Don't do hypervisor calls on non-sun4v in DS driver.
2011-08-11Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2011-08-12ASoC: omap: Update e-mail address of Jarkko NikulaJarkko Nikula
My gmail account got disabled and I'm not going to reopen it. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-11sparc: Don't do hypervisor calls on non-sun4v in DS driver.David S. Miller
Reported-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11pnfs: Automatically select blocks & objects layoutsBoaz Harrosh
Just like files-layout, blocks & objects layouts are part of the NFS 4.1 protocol and should be automatically selected if NFS_4_1 is selected. The small problem is that these depend on other Kernel support being present, while files only depends on NFS itself. This patch removes from the user choice the presence of objects and blocks layout. But makes sure these are selected only if the depended subsystems are present in the Kernel. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-12ASoC: SAMSUNG: Add I2S0 internal dma driverSangbeom Kim
I2S in Exynos4 and S5PC110(S5PV210) has a internal dma. It can be used low power audio mode and 2nd channel transfer. This patch can support idma. [Reapplied after dependencies propagated through in 3.1-rc1. --broonie] Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-11ext4: Properly count journal credits for long symlinksEric Sandeen
Commit df5e6223407e ("ext4: fix deadlock in ext4_symlink() in ENOSPC conditions") recalculated the number of credits needed for a long symlink, in the process of splitting it into two transactions. However, the first credit calculation under-counted because if selinux is enabled, credits are needed to create the selinux xattr as well. Overrunning the reservation will result in an OOPS in jbd2_journal_dirty_metadata() due to this assert: J_ASSERT_JH(jh, handle->h_buffer_credits > 0); Fix this by increasing the reservation size. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-11ext3: Properly count journal credits for long symlinksEric Sandeen
Commit ae54870a1dc9 ("ext3: Fix lock inversion in ext3_symlink()") recalculated the number of credits needed for a long symlink, in the process of splitting it into two transactions. However, the first credit calculation under-counted because if selinux is enabled, credits are needed to create the selinux xattr as well. Overrunning the reservation will result in an OOPS in journal_dirty_metadata() due to this assert: J_ASSERT_JH(jh, handle->h_buffer_credits > 0); Fix this by increasing the reservation size. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-11e1000e: increase driver version numberBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11e1000e: alternate MAC address updateBruce Allan
If word 0x37 in the EEPROM is 0xFFFF _or_ 0x0000, then there is no alternate MAC address in the EEPROM. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11e1000e: do not disable receiver on 82574/82583Bruce Allan
Due to a hardware erratum, the receiver on 82574 and 82583 should not be stopped once it has been started. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11e1000e: alternate MAC address does not work on device id 0x1060Bruce Allan
This issue is present all the way back to 2.6.34 kernels. CC: <stable@kernel.org> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeffrey Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11move RLIMIT_NPROC check from set_user() to do_execve_common()Vasiliy Kulikov
The patch http://lkml.org/lkml/2003/7/13/226 introduced an RLIMIT_NPROC check in set_user() to check for NPROC exceeding via setuid() and similar functions. Before the check there was a possibility to greatly exceed the allowed number of processes by an unprivileged user if the program relied on rlimit only. But the check created new security threat: many poorly written programs simply don't check setuid() return code and believe it cannot fail if executed with root privileges. So, the check is removed in this patch because of too often privilege escalations related to buggy programs. The NPROC can still be enforced in the common code flow of daemons spawning user processes. Most of daemons do fork()+setuid()+execve(). The check introduced in execve() (1) enforces the same limit as in setuid() and (2) doesn't create similar security issues. Neil Brown suggested to track what specific process has exceeded the limit by setting PF_NPROC_EXCEEDED process flag. With the change only this process would fail on execve(), and other processes' execve() behaviour is not changed. Solar Designer suggested to re-check whether NPROC limit is still exceeded at the moment of execve(). If the process was sleeping for days between set*uid() and execve(), and the NPROC counter step down under the limit, the defered execve() failure because NPROC limit was exceeded days ago would be unexpected. If the limit is not exceeded anymore, we clear the flag on successful calls to execve() and fork(). The flag is also cleared on successful calls to set_user() as the limit was exceeded for the previous user, not the current one. Similar check was introduced in -ow patches (without the process flag). v3 - clear PF_NPROC_EXCEEDED on successful calls to set_user(). Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-08-11hwmon: (ibmaem) add missing kfreeJulia Lawall
rs_resp is dynamically allocated in aem_read_sensor(), so it should be freed before exiting in every case. This collects the kfree and the return at the end of the function. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@kernel.org # 2.6.27+
2011-08-11hwmon: (pmbus/lm25066) Ignore byte writes to non-zero pagesGuenter Roeck
pmbus_clear_faults() attempts to clear faults on non-existing real pages. As a result, the command error bit in the status register is set, and faults are not really cleared. All byte writes to non-zero pages are requests to clear the status register on that page. Since non-zero pages are virtual and do not exist on the chip, there is nothing to do, and such requests have to be ignored. This fixes above problem. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-08-11hwmon: (pmbus) Virtualize pmbus_write_byteGuenter Roeck
With virtual pages and to be able to handle more chips, it is necessary to virtualise pmbus_write_byte(). Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-08-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf symbols: Check '/tmp/perf-' symbol file ownership perf sched: Usage leftover from trace -> script rename perf sched: Do not delete session object prematurely perf tools: Check $HOME/.perfconfig ownership perf, x86: Add model 45 SandyBridge support perf tools: Add support to install perf python extension perf tools: do not look at ./config for configuration perf tools: Make clean leaves some files perf lock: Dropping unsupported ':r' modifier perf probe: Fix coredump introduced by probe module option jump label: Reduce the cycle count by changing the link order perf report: Use ui__warning in some more places perf python: Add PERF_RECORD_{LOST,READ,SAMPLE} routine tables perf evlist: Introduce 'disable' method trace events: Update version number reference to new 3.x scheme for EVENT_POWER_TRACING_DEPRECATED perf buildid-cache: Zero out buffer of filenames when adding/removing buildid
2011-08-11MAINTAINERS: Update linus' git repositoryTracey Dent
Change to new git tree - (git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git). Signed-off-by: Tracey Dent <tdent48227@gmail.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-11Revert "EDAC: Correct Kconfig dependencies"Linus Torvalds
This reverts commit af9d220bac41dc3201893e1601cc7c44f7da4498. It turns out that one was meant to be applied on top of the edac.git tree in -next that has more i7core_edac changes, but that wasn't clear in the original email. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-11NFS41: make PNFS_BLOCK selectablePeng Tao
PNFS_BLOCK needs BLK_DEV_DM/MD, which is not a dependency for other pnfs layout drivers. Seperate it out so others can still build when BLK_DEV_DM/MD is not enabled. Also change select to depends on to avoid build failures. Reported-and-tested-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Peng Tao <peng_tao@emc.com> Acked-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-11PCnet: Fix section mismatchRalf Baechle
Building MIPS mtx1_defconfig results in: MODPOST 735 modules WARNING: drivers/net/pcnet32.o(.devinit.text+0x11ec): Section mismatch in reference from the function pcnet32_probe_vlbus.constprop.22() to the variable .init.data:pcnet32_portlist The function __devinit pcnet32_probe_vlbus.constprop.22() references a variable __initdata pcnet32_portlist. If pcnet32_portlist is only used by pcnet32_probe_vlbus.constprop.22 then annotate pcnet32_portlist with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: disable dcb on 578xx since not supported yetDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: properly clean indirect addressesDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: prevent race between undi_unload and load flowsDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: fix select_queue when FCoE is disabledVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: init FCOE FP only onceVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11ipv4: some rt_iif -> rt_route_iif conversionsJulian Anastasov
As rt_iif represents input device even for packets coming from loopback with output route, it is not an unique key specific to input routes. Now rt_route_iif has such role, it was fl.iif in 2.6.38, so better to change the checks at some places to save CPU cycles and to restore 2.6.38 semantics. compare_keys: - input routes: only rt_route_iif matters, rt_iif is same - output routes: only rt_oif matters, rt_iif is not used for matching in __ip_route_output_key - now we are back to 2.6.38 state ip_route_input_common: - matching rt_route_iif implies input route - compared to 2.6.38 we eliminated one rth->fl.oif check because it was not needed even for 2.6.38 compare_hash_inputs: Only the change here is not an optimization, it has effect only for output routes. I assume I'm restoring the original intention to ignore oif, it was using fl.iif - now we are back to 2.6.38 state Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11net/bridge/netfilter/ebtables.c: use available error handling codeJulia Lawall
Free the locally allocated table and newinfo as done in adjacent error handling code. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11net/netlabel/netlabel_kapi.c: add missing cleanup codeJulia Lawall
Call cipso_v4_doi_putdef in the case of the failure of the allocation of entry. Reverse the order of the error handling code at the end of the function and insert more labels in order to reduce the number of unnecessary calls to kfree. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11net/irda: sh_sir: tidyup compile warningKuninori Morimoto
This patch tidyup below warning ${LINUX}/drivers/net/irda/sh_sir.c:514:6: warning: 'val' may be used uninitialized in this function Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-05 16:36:03 +0000