summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-02-16NFC: Add ISO/IEC 15693 header definitionsMark A. Greer
Add the header definitions required by upcoming patches that add support for ISO/IEC 15693. Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-02-13Staging: rtl8812ae: remove modules field of rate_control_opsStephen Rothwell
This has been removed in further work. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Update dtim period before starting BSSPontus Fuchs
The dtim period sent to FW was 0 because the dtim period was never set. This caused an incorrect dtim count to be sent in beacons. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Track dpu signature per staPontus Fuchs
This fixes problems seen with multiple softap clients and reconnecting softap clients. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Rename wcn36xx_vif.ucast_dpu_signature to self_ucast_dpu_signPontus Fuchs
This is more line with the names of the other members Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Add support for 3680Pontus Fuchs
3680 has a few registers on other addresses. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Print FW capabilitiesPontus Fuchs
After fw caps exchange, print the FW's capabilities. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Cache nv to avoid request_firmware on resume pathPontus Fuchs
If wowlan if off mac80211 will stop / start the driver on suspend / resume. This causes problems on resume since request_firmware is called from start. Fix this by caching the nv. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Wait longer for SMD commands to completePontus Fuchs
On some wcnss firmwares the start command can take up to 300ms to complete. Currently there is a 200ms timeout for SMD command to complete which causes the start to fail. Increase the timeout to 500ms. Also improve debug information regarding SMD command completion time. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Improve feature caps exchangePontus Fuchs
* Response format is not in the canonical format. wcn36xx_smd_rsp_status_check cannot be used. * Save the FW caps in wcn36xx struct for later use. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Fix copy paste error hal_exit_bmps -> hal_keep_alivePontus Fuchs
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: add support for STA CSA with chan contextsArik Nemtsov
TI wl12xx/wl18xx cards support channel switch via a driver specific switch_channel op while operating with channel contexts. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: enable beacon filtering only after receiving a beaconEliad Peller
Enabling beacon filtering before receving a beacon might result in not having a beacon at all for the current connected AP, which prevents the station from entering power-save. Replace the current approach (of starting beacon filtering on init) and configure beacon filering only after bss_conf->dtimper is set (which means mac80211 already parsed a beacon). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: increase timeout to 5000 msecsYaniv Machani
dfs configuration command might take longer than the current timeout. increase it to 5 seconds. Signed-off-by: Yaniv Machani <yanivma@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: decrease warning verbosity during recoveryArik Nemtsov
Silently ignore repetitive scheduling of recovery work and commands being passed to the bus when the HW is not available. This can happen many times during recovery and slow it down. It also spams the kernel logs. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: consider multiple APs when checking active_link_countEliad Peller
Each AP has its own global and broadcast links, so when checking for active sta count (according to the active_link_count) we must take them all into account. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: don't handle unsetting of default wep keyEliad Peller
mac80211 unsets the default wep key on disassoc. The fw doesn't support this notification, so simply ignore it. The actual flow actually triggers fw recovery in some cases, as mac80211 unsets the default key only after disassoc, when wlvif->sta.hlid, resulting in invalid hlid being passed to the fw. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: wl18xx: allow CCK rates for AP modeArik Nemtsov
12xx chips allow only OFDM rates in AP mode for BT-Coex purposes. This is no longer required in 18xx chips, starting with FW 8.6.0.0.8. Update the min allowed FW version in 18xx to support this functionality. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: don't stop sched_scan on interface removalBarak Bercovitz
Stopping sched scan on interface removal (during recovery) is no longer needed, as sched scanning is automatically restarted by mac80211. Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: send EAPOL frames with voice priorityIgal Chernobelsky
Send EAPOL frames with voice priority by setting (the new) TX_HW_ATTR_EAPOL_FRAME bit in tx attribute. Sending EAPOL with voice priority fixes re-key timeout issues during heavy traffic. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wl18xx: move to new firmware (wl18xx-fw-3.bin)Eliad Peller
Bump the min wl18xx fw version to 8.8.0.0.13 This fw is not backward compatible with older firmware (due to api changes), so use bump the firmware name as well. Some modifications were done to the driver-fw api in order to support multiple APs. Additionally, some of the consts (such as max stations, max links and max RX BA sessions) were changed. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore/wl12xx/wl18xx: configure iface_combinations per-hwEliad Peller
Each hw supports a different iface combinations. Define the supported combinations in each driver, and save it in wl->iface_combinations. Since each driver defines its own combinations now, it can also define its max supported channels, so we no longer need to save and set it explicitly in wlcore. Update wl18xx interface combinations to allow multiple APs. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore/wl12xx/wl18xx: configure max_stations per-hwEliad Peller
Each hw supports a different max stations (connected to the same ap). add a new wl->max_ap_stations and use it instead of the current common AP_MAX_STATIONS. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore/wl12xx/wl18xx: configure num_links per-hwEliad Peller
Upcoming fw versions will have different max links support (according to the hw). Get ready for it by configuring wl->num_links per-hw, instead of using the const WL12XX_MAX_LINKS. However, continue using WLCORE_MAX_LINKS in order to simplify structs declarations (we use it in multiple bitmaps, and converting them to dynamic arrays is just cumbersome). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore/wl12xx/wl18xx: simplify fw_status handlingEliad Peller
Instead of splitting the fw_status into 2 and using some complex calculations, read the fw status and let each low-level driver (wl12xx/wl18xx) convert it into a common struct. This is required for the upcoming fw api changes, which break the current logic anyway. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: AP: don't start mac80211 PS on non-peer HLIDsArik Nemtsov
It seems the wl18xx FW sometimes sends spurious changes on the PSM state of the broadcast HLID. This causes us to search for a station on a non-peer link and fail, causing warnings in our log. Prevent the driver from considering PSM changes for any non-peer HLIDs. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: block read/writes to FW during ELPBarak Bercovitz
When the chip is in ELP mode read/write to FW is invalid and may cause the lower layers to get stuck. The reads/writes concerning ELP wakeup are the exception here and are checked for. In addition to blocking the IO, produce a warning. Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: cancel Tx watchdog on suspend and rearm on first Tx afterArik Nemtsov
Sometimes a tx_flush during suspend fails, but the FW manages to flush out the packets during the time when the host is supsended. Cancel the Tx-watchdog on suspend to not cause a spurious recovery on resume for that case. Set a flag to reinit the watchdog on the first Tx after resume, so we'll still recover if the FW is not empty and there's indeed a problem. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: memset wl->rx_filter_enabled to zero after recoveryNadim Zubidat
zero rx_filter_enabled array after recovery to avoid cases were the driver will keep trying to clear a filter which is not configured in FW. Such case will cause consecutive recoveries due to command execution failures. While on it, convert rx_filter_enabled to bitmap, to save some memory and make sparse happy (it doesn't like sizeof(bool array)). Signed-off-by: Nadim Zubidat <nadimz@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13b43: use kernel api to replace b43 specific helper functionZHAO Gang
Use ieee80211_channel_to_frequency() to replace b43_channel_to_freq_{2,5}ghz(), and remove unused b43_freq_to_channel_{2,5}ghz(). Signed-off-by: ZHAO Gang <gamerh2o@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-02-12mwifiex: add key material v2 supportAvinash Patil
This patch adds key material V2 support to mwifiex. Newer FW supports this feature and FW KEY API version is used to determine which command structure needs to be used. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: parse API version from FWAvinash Patil
This patch adds support to parse FW API version TLVs. Currently only API version for key_material is supported. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: disable all TDLS link during disconnectionAvinash Patil
During deauthenticate/link lost event, disable all TDLS links as TDLS would not work when infra connection is not active. Also this will avoid an issue where ping to peer station doesn't work after reassociation to AP where we had created TDLS link in earlier association. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: separate BA params for TDLS link if 11ac is supportedAvinash Patil
If TDLS link is 11ac enabled i.e. we as well as peer station supports VHT, configure seprate TX & RX window sizes during BA setup. So even if BSS does not support 11ac, we can use VHT capabilities and higher window sizes on direct link. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: add VHT support for TDLSAvinash Patil
During TDLS setup request/response, if HW is 11ac capable, we add VHT Capability IEs in outgoing data frame. Also while processing received setup request/response, we preserve peer's 11ac capability retrieved from IEs. Patch also gets VHT parameters from config_station handlers and sets it to FW using TDLS config command. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: pass ieee80211_vht_cap to mwifiex_fill_vht_cap_tlvAvinash Patil
This patch changes mwifiex_fill_vht_cap_tlv function to pass struct ieee80211_vht_cap instead of mwifiex_ie_types_vhtcap so that it can be used generically. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: AMPDU support for TDLS linkAvinash Patil
This patch adds AMPDU support for TDLS link. We have set 11n capabilities including AMPDU parameters during ENABLE_LINK. We set a variable in RA list to indicate this as TDLS link. This patch uses these capabilities to know if AMPDU is allowed on TDLS link and enables AMPDU aggregation for TX and RX reording support for RA list for this peer. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: tdls related handling for data packets addressed to TDLS peerAvinash Patil
1. If data packet is addressed to TDLS peer for which link is established, mark these packets with TDLS flag so that FW can send them on direct link instead of sending via AP. 2. If data packet is addressed to TDLS peer and TDLS setup is underway, move these packets to TDLS queue. 3. If this packet is TDLS setup packet, do not block it. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: provision for holding and restoring packets during TDLS setupAvinash Patil
While TDLS link is being setup, few packets from this station to peer station may be buffered at AP. It may happen that once TDLS link is setup, packets sent from station to peer on direct link get delivered before traffic from AP arrives at peer station. This results into packet reordering issue at peer station. To avoid this, we hold data packets destined to TDLS peer during TDLS setup. These packets are moved to temperory TDLS TX queue. Upon successful TDLS setup, they are moved to RA list created for this peer. Upon failure, packets are moved back to AP's RA list for that particular TID. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: add cfg80211 change_station handler supportAvinash Patil
This patch adds cfg80211 change_station handler support for mwifiex which is needed for TDLS link setup. Driver creates a command to modify peer link capabilities and issues command to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: add cfg80211 add_station handler supportAvinash Patil
This patch adds cfg80211 add_station handler support for mwifiex which is needed for TDLS setup. Driver issues create TDLS link command to FW upon receiving add_station from cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: add cfg80211 tdls_oper handler supportAvinash Patil
This patch adds cfg80211 handler tdls_oper handler support to mwifiex. Upon enable link, driver sets status as TDLS status as setup complete and also sets AMSDU size, AMPDU params for direct link. Upon disable link, driver issues command to FW to delete this link in FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: parse TDLS action frames during RXAvinash Patil
This patch adds support for parsing TDLS action frames during station receive handler. Peer station capabilities are stored into station node. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: add tdls_mgmt handler supportAvinash Patil
This patch adds support for TDLS management frames transmit handler. mwifiex driver supports TDLS with external support, i.e. expects user space application to form TDLS frames. Same is advertised to cfg80211 during registration. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: cleanup in mwifiex_fill_cap_info()Amitkumar Karwar
Pass 'struct ieee80211_ht_cap' pointer to mwifiex_fill_cap_info() instead of 'struct mwifiex_ie_types_htcap' pointer, because the routine internally uses the later one. This patch also adds WARN_ON_ONCE check for NULL band. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: move station list functions to common codeAvinash Patil
These functions are now needed by TDLS while managing station list. Move them from AP related file to utility file. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: make tos_to_tid_inv part of mwifiex_private structureAvinash Patil
tos_to_tid_inv values are needed even during TDLS restore operations. Currently tos_to_tid_inv is part of wmm.c and is declared static. Make it part of private structure so that it can be used in other files as well. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: handle AMPDU supported check for AP interfaceAvinash Patil
This patch fixes a bug where we were checking for AP's AMPDU param setting even when transmitting traffic to associated station. Patch adds provision to pass additional parameter ra_list pointer to function which checks if AMPDU is allowed. If current BSS type is AP, we check station's AMPDU params else we check AP's AMPDU params. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: advertise correct beamforming information for VHTAmitkumar Karwar
Currently MU/SU beamformer and MU beamformee features are not supported. Hence this patch modifies VHT capability information accordingly. Number of sounding dimensions should be zero in this case. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 03:35:25 +0000