Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is two patches both fixing bugs in drivers (virtio-scsi and
mpt2sas) causing an oops in certain circumstances"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] virtio-scsi: Skip setting affinity on uninitialized vq
[SCSI] mpt2sas: Don't disable device twice at suspend.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"This udpate delivers:
- A fix for dynamic interrupt allocation on x86 which is required to
exclude the GSI interrupts from the dynamic allocatable range.
This was detected with the newfangled tablet SoCs which have GPIOs
and therefor allocate a range of interrupts. The MSI allocations
already excluded the GSI range, so we never noticed before.
- The last missing set_irq_affinity() repair, which was delayed due
to testing issues
- A few bug fixes for the armada SoC interrupt controller
- A memory allocation fix for the TI crossbar interrupt controller
- A trivial kernel-doc warning fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: irq-crossbar: Not allocating enough memory
irqchip: armanda: Sanitize set_irq_affinity()
genirq: x86: Ensure that dynamic irq allocation does not conflict
linux/interrupt.h: fix new kernel-doc warnings
irqchip: armada-370-xp: Fix releasing of MSIs
irqchip: armada-370-xp: implement the ->check_device() msi_chip operation
irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"This update brings along:
- Two fixes for long standing bugs in the hrtimer code, one which
prevents remote enqueuing and the other preventing arbitrary delays
after a interrupt hang was detected
- A fix in the timer wheel which prevents math overflow
- A fix for a long standing issue with the architected ARM timer
related to the C3STOP mechanism.
- A trivial compile fix for nspire SoC clocksource"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timer: Prevent overflow in apply_slack
hrtimer: Prevent remote enqueue of leftmost timers
hrtimer: Prevent all reprogramming if hang detected
clocksource: nspire: Fix compiler warning
clocksource: arch_arm_timer: Fix age-old arch timer C3STOP detection issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This is a small fix where the trigger code used the wrong
rcu_dereference(). It required rcu_dereference_sched() instead of the
normal rcu_dereference(). It produces a nasty RCU lockdep splat due
to the incorrect rcu notation"
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Use rcu_dereference_sched() for trace event triggers
|
|
As trace event triggers are now part of the mainline kernel, I added
my trace event trigger tests to my test suite I run on all my kernels.
Now these tests get run under different config options, and one of
those options is CONFIG_PROVE_RCU, which checks under lockdep that
the rcu locking primitives are being used correctly. This triggered
the following splat:
===============================
[ INFO: suspicious RCU usage. ]
3.15.0-rc2-test+ #11 Not tainted
-------------------------------
kernel/trace/trace_events_trigger.c:80 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
4 locks held by swapper/1/0:
#0: ((&(&j_cdbs->work)->timer)){..-...}, at: [<ffffffff8104d2cc>] call_timer_fn+0x5/0x1be
#1: (&(&pool->lock)->rlock){-.-...}, at: [<ffffffff81059856>] __queue_work+0x140/0x283
#2: (&p->pi_lock){-.-.-.}, at: [<ffffffff8106e961>] try_to_wake_up+0x2e/0x1e8
#3: (&rq->lock){-.-.-.}, at: [<ffffffff8106ead3>] try_to_wake_up+0x1a0/0x1e8
stack backtrace:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc2-test+ #11
Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
0000000000000001 ffff88007e083b98 ffffffff819f53a5 0000000000000006
ffff88007b0942c0 ffff88007e083bc8 ffffffff81081307 ffff88007ad96d20
0000000000000000 ffff88007af2d840 ffff88007b2e701c ffff88007e083c18
Call Trace:
<IRQ> [<ffffffff819f53a5>] dump_stack+0x4f/0x7c
[<ffffffff81081307>] lockdep_rcu_suspicious+0x107/0x110
[<ffffffff810ee51c>] event_triggers_call+0x99/0x108
[<ffffffff810e8174>] ftrace_event_buffer_commit+0x42/0xa4
[<ffffffff8106aadc>] ftrace_raw_event_sched_wakeup_template+0x71/0x7c
[<ffffffff8106bcbf>] ttwu_do_wakeup+0x7f/0xff
[<ffffffff8106bd9b>] ttwu_do_activate.constprop.126+0x5c/0x61
[<ffffffff8106eadf>] try_to_wake_up+0x1ac/0x1e8
[<ffffffff8106eb77>] wake_up_process+0x36/0x3b
[<ffffffff810575cc>] wake_up_worker+0x24/0x26
[<ffffffff810578bc>] insert_work+0x5c/0x65
[<ffffffff81059982>] __queue_work+0x26c/0x283
[<ffffffff81059999>] ? __queue_work+0x283/0x283
[<ffffffff810599b7>] delayed_work_timer_fn+0x1e/0x20
[<ffffffff8104d3a6>] call_timer_fn+0xdf/0x1be^M
[<ffffffff8104d2cc>] ? call_timer_fn+0x5/0x1be
[<ffffffff81059999>] ? __queue_work+0x283/0x283
[<ffffffff8104d823>] run_timer_softirq+0x1a4/0x22f^M
[<ffffffff8104696d>] __do_softirq+0x17b/0x31b^M
[<ffffffff81046d03>] irq_exit+0x42/0x97
[<ffffffff81a08db6>] smp_apic_timer_interrupt+0x37/0x44
[<ffffffff81a07a2f>] apic_timer_interrupt+0x6f/0x80
<EOI> [<ffffffff8100a5d8>] ? default_idle+0x21/0x32
[<ffffffff8100a5d6>] ? default_idle+0x1f/0x32
[<ffffffff8100ac10>] arch_cpu_idle+0xf/0x11
[<ffffffff8107b3a4>] cpu_startup_entry+0x1a3/0x213
[<ffffffff8102a23c>] start_secondary+0x212/0x219
The cause is that the triggers are protected by rcu_read_lock_sched() but
the data is dereferenced with rcu_dereference() which expects it to
be protected with rcu_read_lock(). The proper reference should be
rcu_dereference_sched().
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"A bunch of regression fixes this time. They fix two regressions in
the PNP subsystem, one in the ACPI processor driver and one in the
ACPI EC driver, four cpufreq driver regressions and an unrelated bug
in one of the drivers. The regressions are recent or introduced in
3.14.
Specifics:
- There are two bugs in the ACPI PNP core that cause errors to be
returned if optional ACPI methods are not present. After an ACPI
core change made in 3.14 one of those errors leads to serial port
suspend failures on some systems. Fix from Rafael J Wysocki.
- A recently added PNP quirk related to Intel chipsets intorduced a
build error in unusual configurations (PNP without PCI). Fix from
Bjorn Helgaas.
- An ACPI EC workaround related to system suspend on Samsung machines
added in 3.14 introduced a race causing some valid EC events to be
discarded. Fix from Kieran Clancy.
- The acpi-cpufreq driver fails to load on some systems after a 3.14
commit related to APIC ID parsing that overlooked one corner case.
Fix from Lan Tianyu.
- Fix for a recently introduced build problem in the ppc-corenet
cpufreq driver from Tim Gardner.
- A recent cpufreq core change to ensure serialization of frequency
transitions for drivers with a ->target_index() callback overlooked
the fact that some of those drivers had been doing operations
introduced by it into the core already by themselves. That
resulted in a mess in which the core and the drivers try to do the
same thing and block each other which leads to deadlocks. Fixes
for the powernow-k7, powernow-k6, and longhaul cpufreq drivers from
Srivatsa S Bhat.
- Fix for a computational error in the powernow-k6 cpufreq driver
from Srivatsa S Bhat"
* tag 'pm+acpi-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / processor: Fix failure of loading acpi-cpufreq driver
PNP / ACPI: Do not return errors if _DIS or _SRS are not present
PNP: Fix compile error in quirks.c
ACPI / EC: Process rather than discard events in acpi_ec_clear
cpufreq: ppc-corenet-cpufreq: Fix __udivdi3 modpost error
cpufreq: powernow-k7: Fix double invocation of cpufreq_freq_transition_begin/end
cpufreq: powernow-k6: Fix double invocation of cpufreq_freq_transition_begin/end
cpufreq: powernow-k6: Fix incorrect comparison with max_multipler
cpufreq: longhaul: Fix double invocation of cpufreq_freq_transition_begin/end
|
|
Pull driver core deferred probe fix from Grant Likely:
"Drivercore race condition fix (exposed by devicetree)
This branch fixes a bug where a device can get stuck in the deferred
list even though all its dependencies are met. The bug has existed
for a long time, but new platform conversions to device tree have
exposed it. This patch is needed to get those platforms working.
This was the pending bug fix I mentioned in my previous pull request.
Normally this would go through Greg's tree seeing that it is a
drivercore change, but devicetree exposes the problem. I've discussed
with Greg and he okayed me asking you to pull directly"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
drivercore: deferral race condition fix
|
|
* acpi-ec:
ACPI / EC: Process rather than discard events in acpi_ec_clear
* acpi-processor:
ACPI / processor: Fix failure of loading acpi-cpufreq driver
|
|
* pnp:
PNP / ACPI: Do not return errors if _DIS or _SRS are not present
PNP: Fix compile error in quirks.c
|
|
* pm-cpufreq:
cpufreq: ppc-corenet-cpufreq: Fix __udivdi3 modpost error
cpufreq: powernow-k7: Fix double invocation of cpufreq_freq_transition_begin/end
cpufreq: powernow-k6: Fix double invocation of cpufreq_freq_transition_begin/end
cpufreq: powernow-k6: Fix incorrect comparison with max_multipler
cpufreq: longhaul: Fix double invocation of cpufreq_freq_transition_begin/end
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"A few dm-thinp fixes for changes merged in 3.15-rc1.
A dm-verity fix for an immutable biovec regression that affects 3.14+.
A dm-cache fix to properly quiesce when using writethrough mode (3.14+)"
* tag 'dm-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: fix writethrough mode quiescing in cache_map
dm thin: use INIT_WORK_ONSTACK in noflush_work to avoid ODEBUG warning
dm verity: fix biovecs hash calculation regression
dm thin: fix rcu_read_lock being held in code that can sleep
dm thin: irqsave must always be used with the pool->lock spinlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"Two very small changes: one fix for the vSMP Foundation platform, and
one to help LLVM not choke on options it doesn't understand (although
it probably should)"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vsmp: Fix irq routing
x86: LLVMLinux: Wrap -mno-80387 with cc-option
|
|
Pull KVM fixes from Paolo Bonzini:
- Fix for a Haswell regression in nested virtualization, introduced
during the merge window.
- A fix from Oleg to async page faults.
- A bunch of small ARM changes.
- A trivial patch to use the new MSI-X API introduced during the merge
window.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: ARM: vgic: Fix the overlap check action about setting the GICD & GICC base address.
KVM: arm/arm64: vgic: fix GICD_ICFGR register accesses
KVM: async_pf: mm->mm_users can not pin apf->mm
KVM: ARM: vgic: Fix sgi dispatch problem
MAINTAINERS: co-maintainance of KVM/{arm,arm64}
arm: KVM: fix possible misalignment of PGDs and bounce page
KVM: x86: Check for host supported fields in shadow vmcs
kvm: Use pci_enable_msix_exact() instead of pci_enable_msix()
ARM: KVM: disable KVM in Kconfig on big-endian systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Two bug fixes, one to fix a potential information leak in the BPF jit
and common-io-layer fix for old firmware levels"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/bpf,jit: initialize A register if 1st insn is BPF_S_LDX_B_MSH
s390/chsc: fix SEI usage on old FW levels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Pull infiniband/rdma fixes from Roland Dreier:
"cxgb4 hardware driver fixes"
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
RDMA/cxgb4: Update Kconfig to include Chelsio T5 adapter
RDMA/cxgb4: Only allow kernel db ringing for T4 devs
RDMA/cxgb4: Force T5 connections to use TAHOE congestion control
RDMA/cxgb4: Fix endpoint mutex deadlocks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Drop the architecture-specifc value for_STK_LIM_MAX to fix stack
related problems with GNU make"
* 'parisc-3.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Use generic uapi/asm/resource.h file
parisc: remove _STK_LIM_MAX override
|
|
Commit 2ee57d58735 ("dm cache: add passthrough mode") inadvertently
removed the deferred set reference that was taken in cache_map()'s
writethrough mode support. Restore taking this reference.
This issue was found with code inspection.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Cc: stable@vger.kernel.org # 3.13+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here is a small set of pin control fixes for the v3.15 series. All
are individual driver fixes and quite self-contained. One of them
tagged for stable.
- Signedness bug in the TB10x
- GPIO inversion fix for the AS3722
- Clear pending pin interrups enabled in the bootloader in the
pinctrl-single driver
- Minor pin definition fixes for the PFC/Renesas driver"
* tag 'pinctrl-v3.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
sh-pfc: r8a7791: Fix definition of MOD_SEL3
sh-pfc: r8a7790: Fix definition of IPSR5
pinctrl: single: Clear pin interrupts enabled by bootloader
pinctrl: as3722: fix handling of GPIO invert bit
pinctrl/TB10x: Fix signedness bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module fixes from Rusty Russell:
"Fixed one missing place for the new taint flag, and remove a warning
giving only false positives (now we finally figured out why)"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
module: remove warning about waiting module removal.
Fix: tracing: use 'E' instead of 'X' for unsigned module taint flag
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
There are only a couple of architectures that override _STK_LIM_MAX to
a non-infinity value. This changes the stack allocation semantics in
subtle ways. For example, GNU make changes its stack allocation to the
hard maximum defined by _STK_LIM_MAX. As a results, threads executed
by processes running under make are allocated a stack size of
_STK_LIM_MAX rather than a sensible default value. This causes various
thread stress tests to fail when they can't muster more than about 50
threads.
The attached change implements the default behavior used by the
majority of architectures.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Reviewed-by: Carlos O'Donell <carlos@systemhalted.org>
Cc: stable@vger.kernel.org # 3.14
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Commit 93ea02bb8435 ("arch: Clean up asm/barrier.h implementations")
wired generic barrier.h for hexagon, but failed to delete the existing
file.
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Compile-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus an Intel RAPL PMU driver fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tests x86: Fix stack map lookup in dwarf unwind test
perf x86: Fix perf to use non-executable stack, again
perf tools: Remove extra '/' character in events file path
perf machine: Search for modules in %s/lib/modules/%s
perf tests: Add static build make test
perf tools: Fix bfd dependency libraries detection
perf tools: Use LDFLAGS instead of ALL_LDFLAGS
perf/x86: Fix RAPL rdmsrl_safe() usage
tools lib traceevent: Fix memory leak in pretty_print()
tools lib traceevent: Fix backward compatibility macros for pevent filter enums
perf tools: Disable libdw unwind for all but x86 arch
perf tests x86: Fix memory leak in sample_ustack()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix Tjmax detection in coretemp driver"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
Revert "hwmon: (coretemp) Refine TjMax detection"
|
|
This is simpler and cleaner. Depending on architecture, a smart
compiler may or may not generate the same code.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull aio fixes from Ben LaHaise:
"The first change from Anatol fixes a regression where io_destroy() no
longer waits for outstanding aios to complete. The second corrects a
memory leak in an error path for vectored aio operations.
Both of these bug fixes should be queued up for stable as well"
* git://git.kvack.org/~bcrl/aio-fixes:
aio: fix potential leak in aio_run_iocb().
aio: block io_destroy() until all context requests are completed
|
|
iovec should be reclaimed whenever caller of rw_copy_check_uvector() returns,
but it doesn't hold when failure happens right after aio_setup_vectored_rw().
Fix that in a such way to avoid hairy goto.
Signed-off-by: Leon Yu <chianglungyu@gmail.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: stable@vger.kernel.org
|
|
This reverts commit 9fb6c9c73b11bef65ba80a362547fd116c1e1c9d.
Tjmax on some Intel CPUs is below 85 degrees C. One known example is
L5630 with Tjmax of 71 degrees C. There are other Xeon processors with
Tjmax of 70 or 80 degrees C. Also, the Intel IA32 System Programming
document states that the temperature target is in bits 23:16 of MSR 0x1a2
(MSR_TEMPERATURE_TARGET), which is 8 bits, not 7.
So even if turbostat uses similar checks to validate Tjmax, there is no
evidence that the checks are actually required. On the contrary, the
checks are known to cause problems and therefore need to be removed.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=75071.
Fixes: 9fb6c9c hwmon: (coretemp) Refine TjMax detection
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent
Pull perf/urgent fixes from Jiri Olsa:
* Fix perf to use non-executable stack, again (Mathias Krause)
* Remove extra '/' character in events file path (Xia Kaixu)
* Search for modules in %s/lib/modules/%s (Richard Yao)
* Build related fixies plus static build test (Jiri Olsa)
* Fix stack map lookup in dwarf unwind test (Jiri Olsa)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
According commit d640113fe (ACPI: processor: fix acpi_get_cpuid for UP
processor), BIOS may not provide _MAT or MADT tables and acpi_get_apicid()
always returns -1. For these cases, original code will pass apic_id with
vaule of -1 to acpi_map_cpuid() and it will check the acpi_id. If acpi_id
is equal to zero, ignores apic_id and return zero for CPU0.
Commit b981513 (ACPI / scan: bail out early if failed to parse APIC
ID for CPU) changed the behavior. Return ENODEV when find apic_id is
less than zero after calling acpi_get_apicid(). This causes acpi-cpufreq
driver fails to be loaded on some machines. This patch is to fix it.
Fixes: b981513f806d (ACPI / scan: bail out early if failed to parse APIC ID for CPU)
References: https://bugzilla.kernel.org/show_bug.cgi?id=73781
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Reported-and-tested-by: KATO Hiroshi <katoh@mikage.ne.jp>
Reported-and-tested-by: Stuart Foster <smf.linux@ntlworld.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPI PNP subsystem returns errors from pnpacpi_set_resources()
and pnpacpi_disable_resources() if the _SRS or _DIS methods are not
present, respectively, but it should not do that, because those
methods are optional. For this reason, modify pnpacpi_set_resources()
and pnpacpi_disable_resources(), respectively, to ignore missing _SRS
or _DIS.
This problem has been uncovered by commit 202317a573b2 (ACPI / scan:
Add acpi_device objects for all device nodes in the namespace) and
manifested itself by causing serial port suspend to fail on some
systems.
Fixes: 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace)
References: https://bugzilla.kernel.org/show_bug.cgi?id=74371
Reported-by: wxg4net <wxg4net@gmail.com>
Reported-and-tested-by: <nonproffessional@gmail.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
First round of KVM/ARM Fixes for 3.15
Includes vgic fixes, a possible kernel corruption bug due to
misalignment of pages and disabling of KVM in KConfig on big-endian
systems, because the last one breaks the build.
|
|
There was a very small race window where resume to kernel mode from a
Exception Path (or pure kernel mode which is true for most of ARC
exceptions anyways), was not disabling interrupts in restore_regs,
clobbering the exception regs
Anton found the culprit call flow (after many sleepless nights)
| 1. we got a Trap from user land
| 2. started to service it.
| 3. While doing some stuff on user-land memory (I think it is padzero()),
| we got a DataTlbMiss
| 4. On return from it we are taking "resume_kernel_mode" path
| 5. NEED_RESHED is not set, so we go to "return from exception" path in
| restore regs.
| 6. there seems to be IRQ happening
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: <stable@vger.kernel.org> #3.10, 3.12, 3.13, 3.14
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Francois Bedard <Francois.Bedard@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few collections of small eggs that have been gathered during the
Easter holidays. Mostly small ASoC fixes, with a HD-audio quirk and a
workaround for Nvidia controller"
* tag 'sound-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Suppress CORBRP clear on Nvidia controller chips
ALSA: hda - add headset mic detect quirk for a Dell laptop
ASoC: jz4740: Remove Makefile entry for removed file
ASoC: Intel: Fix audio crash due to negative address offset
ASoC: dapm: Fix widget double free with auto-disable DAPM kcontrol
ASoC: Intel: Fix incorrect sizeof() in sst_hsw_stream_get_volume()
ASoC: Intel: some incorrect sizeof() usages
ASoC: cs42l73: Convert to use devm_gpio_request_one
ASoC: cs42l52: Convert to use devm_gpio_request_one
ASoC: tlv320aic31xx: document that the regulators are mandatory
ASoC: fsl_spdif: Fix wrong OFFSET of STC_SYSCLK_DIV
ASoC: alc5623: Fix regmap endianness
ASoC: tlv320aic3x: fix shared reset pin for DT
ASoC: rsnd: fix clock prepare/unprepare
|
|
Previous commit 'perf x86: Fix perf to use non-executable stack, again'
moved stack map into MAP__VARIABLE map type again. Fixing the dwarf
unwind test stack map lookup appropriately.
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Link: http://lkml.kernel.org/n/tip-ttzyhbe4zls24z7ednkmhvxl@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
|
|
arch/x86/tests/regs_load.S is missing the linker note about the stack
requirements, therefore making the linker fall back to an executable
stack. As this object gets linked against the final perf binary, it'll
needlessly end up with an executable stack. Fix this by adding the
appropriate linker note.
Also add a global linker flag to prevent future regressions, as
suggested by Jiri. This way perf won't get an executable stack even if
we fail to add the .GNU-stack linker note to future assembler files.
Though, doing so might create regressions the other way around, when
(statically) linking against libraries needing an executable stack.
But, apparently, regressing in that direction is wanted as it is an
indicator of poor code quality -- or just missing linker notes.
Fixes: 3c8b06f981 ("perf tests x86: Introduce perf_regs_load function")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398617466-22749-1-git-send-email-minipli@googlemail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
|
|
The array debugfs_known_mountpoints[] will cause extra '/'
character output.
Remove it.
pre:
$ perf probe -l
/sys/kernel/debug//tracing/uprobe_events file does not exist -
please rebuild kernel with CONFIG_UPROBE_EVENTS.
post:
$ perf probe -l
/sys/kernel/debug/tracing/uprobe_events file does not exist -
please rebuild kernel with CONFIG_UPROBE_EVENTS.
Signed-off-by: Xia Kaixu <xiakaixu@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/535B6660.2060001@huawei.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
|
|
Modules installed outside of the kernel's build system should go into
"%s/lib/modules/%s/extra", but at present, perf will only look at them
when they are in "%s/lib/modules/%s/kernel". Lets encourage good
citizenship by relaxing this requirement to "%s/lib/modules/%s". This
way open source modules that are out-of-tree have no incentive to start
populating a directory reserved for in-kernel modules and I can stop
hex-editing my system's perf binary when profiling OSS out-of-tree
modules.
Feedback from Namhyung Kim correctly revealed that the hex-edits that I
had been doing meant that perf was also traversing the build and source
symlinks in %s/lib/modules/%s. That is undesireable, so we explicitly
exclude them from traversal with a minor tweak to the traversal routine.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Acked-by: Namhyung kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398532675-13684-1-git-send-email-ryao@gentoo.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
|
|
Adding test for building static perf build into the automated
suite. Also available via following commands:
$ make -f tests/make make_static
- make_static: cd . && make -f Makefile DESTDIR=/tmp/tmp.7u5MlB4njo LDFLAGS=-static
$ make -f tests/make make_static_O
- make_static_O: cd . && make -f Makefile O=/tmp/tmp.Ay6r3wEmtX DESTDIR=/tmp/tmp.vK0KQwO0Vi LDFLAGS=-static
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398760413-7574-1-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
|
|
There's false assumption in the library detection code
assuming -liberty and -lz are always present once bfd
is detected. The fails on Ubuntu (14.04) as reported
by Ingo.
Forcing the bdf dependency libraries detection any
time bfd library is detected.
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398676935-6615-1-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
|
|
We no longer use ALL_LDFLAGS, Replacing with LDFLAGS.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398675770-3109-1-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
|
|
On architectures with sizeof(int) < sizeof (long), the
computation of mask inside apply_slack() can be undefined if the
computed bit is > 32.
E.g. with: expires = 0xffffe6f5 and slack = 25, we get:
expires_limit = 0x20000000e
bit = 33
mask = (1 << 33) - 1 /* undefined */
On x86, mask becomes 1 and and the slack is not applied properly.
On s390, mask is -1, expires is set to 0 and the timer fires immediately.
Use 1UL << bit to solve that issue.
Suggested-by: Deborah Townsend <dstownse@us.ibm.com>
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20140418152310.GA13654@midget.suse.cz
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
If a cpu is idle and starts an hrtimer which is not pinned on that
same cpu, the nohz code might target the timer to a different cpu.
In the case that we switch the cpu base of the timer we already have a
sanity check in place, which determines whether the timer is earlier
than the current leftmost timer on the target cpu. In that case we
enqueue the timer on the current cpu because we cannot reprogram the
clock event device on the target.
If the timers base is already the target CPU we do not have this
sanity check in place so we enqueue the timer as the leftmost timer in
the target cpus rb tree, but we cannot reprogram the clock event
device on the target cpu. So the timer expires late and subsequently
prevents the reprogramming of the target cpu clock event device until
the previously programmed event fires or a timer with an earlier
expiry time gets enqueued on the target cpu itself.
Add the same target check as we have for the switch base case and
start the timer on the current cpu if it would become the leftmost
timer on the target.
[ tglx: Rewrote subject and changelog ]
Signed-off-by: Leon Ma <xindong.ma@intel.com>
Link: http://lkml.kernel.org/r/1398847391-5994-1-git-send-email-xindong.ma@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
If the last hrtimer interrupt detected a hang it sets hang_detected=1
and programs the clock event device with a delay to let the system
make progress.
If hang_detected == 1, we prevent reprogramming of the clock event
device in hrtimer_reprogram() but not in hrtimer_force_reprogram().
This can lead to the following situation:
hrtimer_interrupt()
hang_detected = 1;
program ce device to Xms from now (hang delay)
We have two timers pending:
T1 expires 50ms from now
T2 expires 5s from now
Now T1 gets canceled, which causes hrtimer_force_reprogram() to be
invoked, which in turn programs the clock event device to T2 (5
seconds from now).
Any hrtimer_start after that will not reprogram the hardware due to
hang_detected still being set. So we effectivly block all timers until
the T2 event fires and cleans up the hang situation.
Add a check for hang_detected to hrtimer_force_reprogram() which
prevents the reprogramming of the hang delay in the hardware
timer. The subsequent hrtimer_interrupt will resolve all outstanding
issues.
[ tglx: Rewrote subject and changelog and fixed up the comment in
hrtimer_force_reprogram() ]
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: http://lkml.kernel.org/r/53602DC6.2060101@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Pull drm fixes from Dave Airlie:
"Smattering of fixes, i915, exynos, tegra, msm, vmwgfx.
A bit of framebuffer reference counting fallout fixes, i915 GM45
regression fix, DVI regression fix, vmware info leak between processes
fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/exynos: use %pad for dma_addr_t
drm/exynos: dsi: use IS_ERR() to check devm_ioremap_resource() results
MAINTAINERS: update maintainer entry for Exynos DP driver
drm/exynos: balance framebuffer refcount
drm/i915: Move all ring resets before setting the HWS page
drm/i915: Don't WARN nor handle unexpected hpd interrupts on gmch platforms
drm/msm/mdp4: cure for the cursor blues (v2)
drm/msm: default to XR24 rather than AR24
drm/msm: fix memory leak
drm/tegra: restrict plane loops to legacy planes
drm/i915: Allow full PPGTT with param override
drm/i915: Discard BIOS framebuffers too small to accommodate chosen mode
drm/vmwgfx: Make sure user-space can't DMA across buffer object boundaries v2
drm/i915: get power domain in case the BIOS enabled eDP VDD
drm/i915: Don't check gmch state on inherited configs
drm/i915: Allow user modes to exceed DVI 165MHz limit
|
|
Use %pad for dma_addr_t, because a dma_addr_t type can vary
based on build options. So, it prevents possible build warnings
in printks.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
devm_ioremap_resource() returns an error pointer, not NULL. Thus,
the result should be checked with IS_ERR().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Recently, Exynos DP driver was moved from drivers/video/exynos/
directory to drivers/gpu/drm/exynos/ directory. So, I update
and add maintainer entry for Exynos DP driver.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
exynos_drm_crtc_mode_set assigns primary framebuffer to plane without
taking reference. Then during framebuffer removal it is dereferenced twice,
causing oops. The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://people.freedesktop.org/~thomash/linux into drm-next
single security fix, cc'd stable.
* 'vmwgfx-fixes-3.15' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Make sure user-space can't DMA across buffer object boundaries v2
|