| Age | Commit message (Collapse) | Author |
|---|
|
This patch tries to batched used ring update during RX. This is pretty
fit for the case when guest is much faster (e.g dpdk based
backend). In this case, used ring is almost empty:
- we may get serious cache line misses/contending on both used ring
and used idx.
- at most 1 packet could be dequeued at one time, batching in guest
does not make much effect.
Update used ring in a batch can help since guest won't access the used
ring until used idx was advanced for several descriptors and since we
advance used ring for every N packets, guest will only need to access
used idx for every N packet since it can cache the used idx. To have a
better interaction for both batch dequeuing and dpdk batching,
VHOST_RX_BATCH was used as the maximum number of descriptors that
could be batched.
Test were done between two machines with 2.40GHz Intel(R) Xeon(R) CPU
E5-2630 connected back to back through ixgbe. Traffic were generated
on one remote ixgbe through MoonGen and measure the RX pps through
testpmd in guest when do xdp_redirect_map from local ixgbe to
tap. RX pps were increased from 3.05 Mpps to 4.00 Mpps (about 31%
improvement).
One possible concern for this is the implications for TCP (especially
latency sensitive workload). Result[1] does not show obvious changes
for most of the netperf test (RR, TX, and RX). And we do get some
improvements for RX on some specific size.
Guest RX:
size/sessions/+thu%/+normalize%
64/ 1/ +2%/ +2%
64/ 2/ +2%/ -1%
64/ 4/ +1%/ +1%
64/ 8/ 0%/ 0%
256/ 1/ +6%/ -3%
256/ 2/ -3%/ +2%
256/ 4/ +11%/ +11%
256/ 8/ 0%/ 0%
512/ 1/ +4%/ 0%
512/ 2/ +2%/ +2%
512/ 4/ 0%/ -1%
512/ 8/ -8%/ -8%
1024/ 1/ -7%/ -17%
1024/ 2/ -8%/ -7%
1024/ 4/ +1%/ 0%
1024/ 8/ 0%/ 0%
2048/ 1/ +30%/ +14%
2048/ 2/ +46%/ +40%
2048/ 4/ 0%/ 0%
2048/ 8/ 0%/ 0%
4096/ 1/ +23%/ +22%
4096/ 2/ +26%/ +23%
4096/ 4/ 0%/ +1%
4096/ 8/ 0%/ 0%
16384/ 1/ -2%/ -3%
16384/ 2/ +1%/ -4%
16384/ 4/ -1%/ -3%
16384/ 8/ 0%/ -1%
65535/ 1/ +15%/ +7%
65535/ 2/ +4%/ +7%
65535/ 4/ 0%/ +1%
65535/ 8/ 0%/ 0%
TCP_RR:
size/sessions/+thu%/+normalize%
1/ 1/ 0%/ +1%
1/ 25/ +2%/ +1%
1/ 50/ +4%/ +1%
64/ 1/ 0%/ -4%
64/ 25/ +2%/ +1%
64/ 50/ 0%/ -1%
256/ 1/ 0%/ 0%
256/ 25/ 0%/ 0%
256/ 50/ +4%/ +2%
Guest TX:
size/sessions/+thu%/+normalize%
64/ 1/ +4%/ -2%
64/ 2/ -6%/ -5%
64/ 4/ +3%/ +6%
64/ 8/ 0%/ +3%
256/ 1/ +15%/ +16%
256/ 2/ +11%/ +12%
256/ 4/ +1%/ 0%
256/ 8/ +5%/ +5%
512/ 1/ -1%/ -6%
512/ 2/ 0%/ -8%
512/ 4/ -2%/ +4%
512/ 8/ +6%/ +9%
1024/ 1/ +3%/ +1%
1024/ 2/ +3%/ +9%
1024/ 4/ 0%/ +7%
1024/ 8/ 0%/ +7%
2048/ 1/ +8%/ +2%
2048/ 2/ +3%/ -1%
2048/ 4/ -1%/ +11%
2048/ 8/ +3%/ +9%
4096/ 1/ +8%/ +8%
4096/ 2/ 0%/ -7%
4096/ 4/ +4%/ +4%
4096/ 8/ +2%/ +5%
16384/ 1/ -3%/ +1%
16384/ 2/ -1%/ -12%
16384/ 4/ -1%/ +5%
16384/ 8/ 0%/ +1%
65535/ 1/ 0%/ -3%
65535/ 2/ +5%/ +16%
65535/ 4/ +1%/ +2%
65535/ 8/ +1%/ -1%
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2018-01-08
Four patches from Or that add Hairpin support to mlx5:
===========================================================
From: Or Gerlitz <ogerlitz@mellanox.com>
We refer the ability of NIC HW to fwd packet received on one port to
the other port (also from a port to itself) as hairpin. The application API
is based
on ingress tc/flower rules set on the NIC with the mirred redirect
action. Other actions can apply to packets during the redirect.
Hairpin allows to offload the data-path of various SW DDoS gateways,
load-balancers, etc to HW. Packets go through all the required
processing in HW (header re-write, encap/decap, push/pop vlan) and
then forwarded, CPU stays at practically zero usage. HW Flow counters
are used by the control plane for monitoring and accounting.
Hairpin is implemented by pairing a receive queue (RQ) to send queue (SQ).
All the flows that share <recv NIC, mirred NIC> are redirected through
the same hairpin pair. Currently, only header-rewrite is supported as a
packet modification action.
I'd like to thanks Elijah Shakkour <elijahs@mellanox.com> for implementing this
functionality
on HW simulator, before it was avail in the FW so the driver code could be
tested early.
===========================================================
From Feras three patches that provide very small changes that allow IPoIB
to support RX timestamping for child interfaces, simply by hooking the mlx5e
timestamping PTP ioctl to IPoIB child interface netdev profile.
One patch from Gal to fix a spilling mistake.
Two patches from Eugenia adds drop counters to VF statistics
to be reported as part of VF statistics in netlink (iproute2) and
implemented them in mlx5 eswitch.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Peng Li says:
====================
code improvements in HNS3 driver
This patchset fixes 2 comments for community review.
[patch 1/2] reverts "net: hns3: Add packet statistics of netdev"
reported by Jakub Kicinski and David Miller.
[patch 2/2] reports the function type the same line with
hns3_nic_get_stats64, reported by Andrew Lunn.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function type should be on the same line with the function
name, or it may cause display error if a patch edit the
function. There is am example following:
https://www.spinics.net/lists/netdev/msg476141.html
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 8491000754796c838a0081c267f9dd54ad2ccba3.
It is duplicate to add statistics of netdev for ethtool -S.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jassi Brar says:
====================
Socionext Synquacer NETSEC driver
Changes since v5
# Removed helper macros
# Removed 'inline' qualifier
# Changed multiline empty comment to single line
# Added 'clock-names' property in DT binding example
# Ignore 'clock-names' property in driver until f/ws in the wild are
upgraded or we support instance that take in more than one clock.
# Rebased the patchset onto net-next
Changes since v4
# Fixed ucode indexing as a word, instead of byte
# Removed redundant clocks, keep only phy rate reference clock
and expect it to be 'phy_ref_clk'
Changes since v3
# Discard 'socionext,snq-mdio', and simply use 'mdio' subnode.
# Use ioremap on ucode region as well, instead of memremap.
Changes since v2
# Use 'mdio' subnode in DT bindings.
# Use phy_interface_mode_is_rgmii(), instead of open coding the check.
# Use readl/b with eeprom_base pointer.
# Unregister mdio bus upon failure in probe.
Changes since v1
# Switched from using memremap to ioremap
# Implemented ndo_do_ioctl callback
# Defined optional 'dma-coherent' DT property
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add entry for the Socionext Netsec controller driver and DT bindings.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver adds support for Socionext "netsec" IP Gigabit
Ethernet + PHY IP used in the Synquacer SC2A11 SoC.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds documentation for Device-Tree bindings for the
Socionext NetSec Controller driver.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
10GbE Intel Wired LAN Driver Updates 2018-01-09
This series contains updates to ixgbe and ixgbevf only.
Emil fixes an issue with "wake on LAN"(WoL) where we need to ensure we
enable the reception of multicast packets so that WoL works for IPv6
magic packets. Cleaned up code no longer needed with the update to
adaptive ITR.
Paul update the driver to advertise the highest capable link speed
when a module gets inserted. Also extended the displaying of firmware
version to include the iSCSI and OEM block in the EEPROM to better
identify firmware versions/images.
Tonghao Zhang cleans up a code comment that no longer applies since
InterruptThrottleRate has been removed from the driver.
Alex fixes SR-IOV and MACVLAN offload interaction, where the MACVLAN
offload was incorrectly configuring several filters with the wrong
pool value which resulted in MACLVAN interfaces not being able to
receive traffic that had to pass over the physical interface. Fixed
transmit hangs and dropped receive frames when the number of VFs
changed. Added support for RSS on MACVLAN pools for X550 devices.
Fixed up the MACVLAN limitations so we can now support 63 offloaded
devices. Cleaned up MACVLAN code that is no longer needed with the
recent changes and fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Heiner Kallweit says:
====================
r8169: improve runtime pm
On my system with two network ports I found that runtime PM didn't
suspend the unused port. Therefore I checked runtime pm in this driver
in somewhat more detail and this series improves runtime pm in general
and solves the mentioned issue.
Tested on a system with RTL8168evl (MAC version 34).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So far rpm doesn't cover cases like unused ports which are never
brought up. If they are active at probe time they remain in this state.
Included in this patch:
- Let the idle notification check whether we can suspend and let it
schedule the suspend. This way we don't need to have calls to
pm_schedule_suspend in different places.
- At the end of rtl_open and rtl_init_one send an idle notification
to allow suspending if the link is down. If a cable is plugged in
aneg is finished before the suspend timer expires and the suspend
request is cancelled.
- Change rtl8169_runtime_suspend to power down the chip if the
interface is down.
Successfully tested on a RTL8168evl (mac version 34).
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch partially reverts commit e4fbce740f07 "r8169: Fix runtime
power management" from 2010. At that time the suspend delay was 100ms
and therefore suspending happened during initial aneg. Currently
suspend delay is 5s, so suspend starts after aneg and the issue
doesn't exist any longer. On my system aneg takes almost 3s, to be on
the safe side let's increase the suspend delay to 10s.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch reverts commit 2a15cd2ff488 "r8169: runtime resume before
shutdown" from 2012. Few months after this change the underlying issue
was solved in the PCI core with commit 3ff2de9ba1a2 "PCI/PM: Resume
device before shutdown".
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jon Maloy says:
====================
tipc: improvements to group messaging
We make a number of simplifications and improvements to the group
messaging service. They aim at readability/maintainability of the code
as well as scalability.
The series is based on commit f9c935db8086 ("tipc: fix problems with
multipoint-to-point flow control) which has been applied to 'net' but
not yet to 'net-next'.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current criteria for returning POLLOUT from a group member socket is
too simplistic. It basically returns POLLOUT as soon as the group has
external destinations, something obviously leading to a lot of spinning
during destination congestion situations. At the same time, the internal
congestion handling is unnecessarily complex.
We now change this as follows.
- We introduce an 'open' flag in struct tipc_group. This flag is used
only to help poll() get the setting of POLLOUT right, and *not* for
congeston handling as such. This means that a user can choose to
ignore an EAGAIN for a destination and go on sending messages to
other destinations in the group if he wants to.
- The flag is set to false every time we return EAGAIN on a send call.
- The flag is set to true every time any member, i.e., not necessarily
the member that caused EAGAIN, is removed from the small_win list.
- We remove the group member 'usr_pending' flag. The size of the send
window and presence in the 'small_win' list is sufficient criteria
for recognizing congestion.
This solution seems to be a reasonable compromise between 'anycast',
which is normally not waiting for POLLOUT for a specific destination,
and the other three send modes, which are.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a member joins a group, it also indicates a binding scope. This
makes it possible to create both node local groups, invisible to other
nodes, as well as cluster global groups, visible everywhere.
In order to avoid that different members end up having permanently
differing views of group size and memberhip, we must inhibit locally
and globally bound members from joining the same group.
We do this by using the binding scope as an additional separator between
groups. I.e., a member must ignore all membership events from sockets
using a different scope than itself, and all lookups for message
destinations must require an exact match between the message's lookup
scope and the potential target's binding scope.
Apart from making it possible to create local groups using the same
identity on different nodes, a side effect of this is that it now also
becomes possible to create a cluster global group with the same identity
across the same nodes, without interfering with the local groups.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when a user is subscribing for binding table publications,
he will receive a PUBLISH event for all already existing matching items
in the binding table.
However, a group socket making a subscriptions doesn't need this initial
status update from the binding table, because it has already scanned it
during the join operation. Worse, the multiplicatory effect of issuing
mutual events for dozens or hundreds group members within a short time
frame put a heavy load on the topology server, with the end result that
scale out operations on a big group tend to take much longer than needed.
We now add a new filter option, TIPC_SUB_NO_STATUS, for topology server
subscriptions, so that this initial avalanche of events is suppressed.
This change, along with the previous commit, significantly improves the
range and speed of group scale out operations.
We keep the new option internal for the tipc driver, at least for now.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a socket is joining a group, we look up in the binding table to
find if there are already other members of the group present. This is
used for being able to return EAGAIN instead of EHOSTUNREACH if the
user proceeds directly to a send attempt.
However, the information in the binding table can be used to directly
set the created member in state MBR_PUBLISHED and send a JOIN message
to the peer, instead of waiting for a topology PUBLISH event to do this.
When there are many members in a group, the propagation time for such
events can be significant, and we can save time during the join
operation if we use the initial lookup result fully.
In this commit, we eliminate the member state MBR_DISCOVERED which has
been the result of the initial lookup, and do instead go directly to
MBR_PUBLISHED, which initiates the setup.
After this change, the tipc_member FSM looks as follows:
+-----------+
---->| PUBLISHED |-----------------------------------------------+
PUB- +-----------+ LEAVE/WITHRAW |
LISH |JOIN |
| +-------------------------------------------+ |
| | LEAVE/WITHDRAW | |
| | +------------+ | |
| | +----------->| PENDING |---------+ | |
| | |msg/maxactv +-+---+------+ LEAVE/ | | |
| | | | | WITHDRAW | | |
| | | +----------+ | | | |
| | | |revert/maxactv| | | |
| | | V V V V V
| +----------+ msg +------------+ +-----------+
+-->| JOINED |------>| ACTIVE |------>| LEAVING |--->
| +----------+ +--- -+------+ LEAVE/+-----------+DOWN
| A A | WITHDRAW A A A EVT
| | | |RECLAIM | | |
| | |REMIT V | | |
| | |== adv +------------+ | | |
| | +---------| RECLAIMING |--------+ | |
| | +-----+------+ LEAVE/ | |
| | |REMIT WITHDRAW | |
| | |< adv | |
| |msg/ V LEAVE/ | |
| |adv==ADV_IDLE+------------+ WITHDRAW | |
| +-------------| REMITTED |------------+ |
| +------------+ |
|PUBLISH |
JOIN +-----------+ LEAVE/WITHDRAW |
---->| JOINING |-----------------------------------------------+
+-----------+
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the changes in the previous commit the group LEAVE sequence
can be simplified.
We now let the arrival of a LEAVE message unconditionally issue a group
DOWN event to the user. When a topology WITHDRAW event is received, the
member, if it still there, is set to state LEAVING, but we only issue a
group DOWN event when the link to the peer node is gone, so that no
LEAVE message is to be expected.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the current implementation, a group socket receiving topology
events about other members just converts the topology event message
into a group event message and stores it until it reaches the right
state to issue it to the user. This complicates the code unnecessarily,
and becomes impractical when we in the coming commits will need to
create and issue membership events independently.
In this commit, we change this so that we just notice the type and
origin of the incoming topology event, and then drop the buffer. Only
when it is time to actually send a group event to the user do we
explicitly create a new message and send it upwards.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Analysis reveals that the member state MBR_QURANTINED in reality is
unnecessary, and can be replaced by the state MBR_JOINING at all
occurrencs.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We handle a corner case in the function tipc_group_update_rcv_win().
During extreme pessure it might happen that a message receiver has all
its active senders in RECLAIMING or REMITTED mode, meaning that there
is nobody to reclaim advertisements from if an additional sender tries
to go active.
Currently we just set the new sender to ACTIVE anyway, hence at least
theoretically opening up for a receiver queue overflow by exceeding the
MAX_ACTIVE limit. The correct solution to this is to instead add the
member to the pending queue, while letting the oldest member in that
queue revert to JOINED state.
In this commit we refactor the code for handling message arrival from
a JOINED member, both to make it more comprehensible and to cover the
case described above.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- We remove the 'reclaiming' member list in struct tipc_group, since
it doesn't serve any purpose.
- We simplify the GRP_REMIT_MSG branch of tipc_group_protocol_rcv().
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tariq Toukan says:
====================
ethtool ringparam upper bound
This patchset by Jenny adds sanity checks in ethtool ringparam
operation for input upper bounds, similarly to what's done in
ethtool_set_channels.
The checks are added in patch 1, using a call to get_ringparam
prior to calling set_ringparam NDO.
Patch 2 changes the function's behavior in mlx4_en, so that
it returns an error for out-of-range input, instead of rounding
it to closest valid, similar to mlx5e.
Patch 3 removes the upper bound checks in mlx5e_ethtool_set_ringparam
as it becomes redundant.
Series generated against net-next commit:
f66faae2f80a Merge branch 'ipv6-ipv4-nexthop-align'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the checks are done in upper layer ethtool code,
checks in driver are not needed any more.
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In current implementation, any requested RX/TX ring size value
that is less than minimum is silently casted to nearest valid value.
Update this behavior to align with mlx5 behavior by printing warning
in dmesg and remaining the size unchanged.
Kernel is responsible for verifying against the maximum.
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a sanity check to ensure that all requested ring parameters
are within bounds, which should reduce errors in driver implementation.
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The l2 acceleration private pointer isn't needed in the ring struct. It
isn't really used anywhere other than to test and see if we are supporting
an offloaded macvlan netdev, and it is much easier to test netdev for not
being ixgbe based to verify that.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch simplifies the check for Tx pending traffic and makes it more
holistic as there being any difference between next_to_use and
next_to_clean is much more informative than if head and tail are equal, as
it is possible for us to either not update tail, or not be notified of
completed work in which case next_to_clean would not be equal to head.
In addition the simplification makes it so that we don't have to read
hardware which allows us to drop a number of variables that were previously
being used in the call.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This change is a fix of the macvlan offload so that we correctly handle
macvlan offloaded devices. Specifically we were configuring our limits based
on the assumption that we were going to max out the RSS indices for every
mode. As a result when we went to 15 or more macvlan interfaces we were
forced into the 2 queue RSS mode on VFs even though they could have still
supported 4.
This change splits the logic up so that we limit either the total number of
macvlan instances if DCB is enabled, or limit the number of RSS queues used
per macvlan (instead of per pool) if SR-IOV is enabled. By doing this we
can make best use of the part.
In addition I have increased the maximum number of supported interfaces to
63 with one queue per offloaded interface as this more closely reflects the
actual values supported by the interface.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The num_rx_pools value is overwritten when we reinitialize the queue
configuration. In reality we shouldn't need to be updating the value since
it is redone every time we call into ixgbe_setup_tc so for now just drop
the spots where we were incrementing or decrementing the value.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
In order for RSS to work on the macvlan pools of the X550 we need to
populate the MRQC, RETA, and RSS key values for each pool. This patch makes
it so that we now take care of that.
In addition I have dropped the macvlan specific configuration of psrtype
since it is redundant with the code that already exists for configuring
this value.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
If the number of VFs are changed we need to reinitialize the part since the
offset for the device and the number of pools will be incorrect. Without
this change we can end up seeing Tx hangs and dropped Rx frames for
incoming traffic.
In addition we should drop the code that is arbitrarily changing the
default pool and queue configuration. Instead we should wait until the port
is reset and reconfigured via ixgbe_sriov_reinit.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Use the ARRAY_SIZE macro on array seg6_action_table to determine size of
the array. Improvement suggested by coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the ARRAY_SIZE macro on array cmd_priv_map to determine size of the
array. Improvement suggested by coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When SR-IOV was enabled the macvlan offload was configuring several filters
with the wrong pool value. This would result in the macvlan interfaces not
being able to receive traffic that had to pass over the physical interface.
To fix it wrap the pool argument in the VMDQ_P macro which will add the
necessary offset to get to the actual VMDq pool
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Removed leftover assignment of xcast_mode.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The InterruptThrottleRate has been removed from ixgbe. Then Update
the comment.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The ability to set speed and duplex for virtio_net is useful in various
scenarios as described here:
16032be virtio_net: add ethtool support for set and get of settings
However, it would be nice to be able to set this from the hypervisor,
such that virtio_net doesn't require custom guest ethtool commands.
Introduce a new feature flag, VIRTIO_NET_F_SPEED_DUPLEX, which allows
the hypervisor to export a linkspeed and duplex setting. The user can
subsequently overwrite it later if desired via: 'ethtool -s'.
Note that VIRTIO_NET_F_SPEED_DUPLEX is defined as bit 63, the intention
is that device feature bits are to grow down from bit 63, since the
transports are starting from bit 24 and growing up.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtio-dev@lists.oasis-open.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend FW version reporting by displaying information from the iSCSI
or OEM block in the EEPROM.
This will allow us to more accurately identify the FW.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This adds support for the GCM-AES-256 cipher suite as specified in
IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used,
with GCM-AES-128 being the default cipher suite as defined in the standard.
Signed-off-by: Felix Walter <felix.walter@cloudandheat.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On module insert advertise highest capable link speed. If module is
capable of 10G, then advertise 10G, else advertise modules capable
link speeds.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This enum is no longer needed after
commit: b4ded8327fe ("ixgbe: Update adaptive ITR algorithm")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Previously we only enabled the reception of multicast packets when
wake on multicast is set, but we also need this to allow waking with
IPv6 magic packets.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Jason Wang says:
====================
XDP transmission for tuntap
This series tries to implement XDP transmission (ndo_xdp_xmit) for
tuntap. Pointer ring was used for queuing both XDP buffers and
sk_buff, this is done by encoding the type into lowest bit of the
pointer and storin XDP metadata in the headroom of XDP buff.
Tests gets 3.05 Mpps when doing xdp_redirect_map from ixgbe to VM
(testpmd + virtio-net in guest). This gives us ~20% improvments
compared to use skb during redirect.
Please review.
Changes from V1:
- slient warnings
- fix typos
- add skb mode number in the commit log
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch implements XDP transmission for TAP. Since we can't create
new queues for TAP during XDP set, exist ptr_ring was reused for
queuing XDP buffers. To differ xdp_buff from sk_buff, TUN_XDP_FLAG
(0x1UL) was encoded into lowest bit of xpd_buff pointer during
ptr_ring_produce, and was decoded during consuming. XDP metadata was
stored in the headroom of the packet which should work in most of
cases since driver usually reserve enough headroom. Very minor changes
were done for vhost_net: it just need to peek the length depends on
the type of pointer.
Tests were done on two Intel E5-2630 2.40GHz machines connected back
to back through two 82599ES. Traffic were generated/received through
MoonGen/testpmd(rxonly). It reports ~20% improvements when
xdp_redirect_map is doing redirection from ixgbe to TAP (from 2.50Mpps
to 3.05Mpps)
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch switches to use ptr_ring instead of skb_array. This will be
used to enqueue different types of pointers by encoding type into
lower bits.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Add flow counters to count packets dropped due to drop rules
configured in eswitch egress and ingress ACLs.
These counters will count VFs violations and incoming traffic drops.
Will be presented on hypervisor via standard 'ip -s link show' command.
Example: "ip -s link show dev enp5s0f0"
6: enp5s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 24:8a:07:a5:28:f0 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped overrun mcast
0 0 0 0 0 2
TX: bytes packets errors dropped carrier collsns
1406 17 0 0 0 0
vf 0 MAC 00:00:ca:fe:ca:fe, vlan 5, spoof checking off, link-state auto, trust off, query_rss off
RX: bytes packets mcast bcast dropped
1666 29 14 32 0
TX: bytes packets dropped
2880 44 2412
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
