summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-23net: bridge: mcast: use br_ip's src for src groups and querier addressNikolay Aleksandrov
Now that we have src and dst in br_ip it is logical to use the src field for the cases where we need to work with a source address such as querier source address and group source address. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: bridge: add src field to br_ipNikolay Aleksandrov
Add a new src field to struct br_ip which will be used to lookup S, G entries. When SSM option is added we will enable full br_ip lookups. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: bridge: mdb: use extack in br_mdb_add() and br_mdb_add_group()Nikolay Aleksandrov
Pass and use extack all the way down to br_mdb_add_group(). Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: bridge: mdb: move all port and bridge checks to br_mdb_addNikolay Aleksandrov
To avoid doing duplicate device checks and searches (the same were done in br_mdb_add and __br_mdb_add) pass the already found port to __br_mdb_add and pull the bridge's netif_running and enabled multicast checks to br_mdb_add. This would also simplify the future extack errors. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: bridge: mdb: use extack in br_mdb_parse()Nikolay Aleksandrov
We can drop the pr_info() calls and just use extack to return a meaningful error to user-space when br_mdb_parse() fails. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: realtek: Remove set but not used variableZheng Yongjun
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/realtek/8139cp.c: In function cp_tx_timeout: drivers/net/ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] `rc` is never used, so remove it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23hinic: improve the comments of function headerLuo bin
Fix the warnings about function header comments when building hinic driver with "W=1" option. Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-09-23 The following pull-request contains BPF updates for your *net-next* tree. We've added 95 non-merge commits during the last 22 day(s) which contain a total of 124 files changed, 4211 insertions(+), 2040 deletions(-). The main changes are: 1) Full multi function support in libbpf, from Andrii. 2) Refactoring of function argument checks, from Lorenz. 3) Make bpf_tail_call compatible with functions (subprograms), from Maciej. 4) Program metadata support, from YiFei. 5) bpf iterator optimizations, from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23tools resolve_btfids: Always force HOSTARCHJiri Olsa
Seth reported problem with cross builds, that fail on resolve_btfids build, because we are trying to build it on cross build arch. Fixing this by always forcing the host arch. Reported-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200923185735.3048198-2-jolsa@kernel.org
2020-09-23bpf: Check CONFIG_BPF option for resolve_btfidsJiri Olsa
Currently all the resolve_btfids 'users' are under CONFIG_BPF code, so if we have CONFIG_BPF disabled, resolve_btfids will fail, because there's no data to resolve. Disabling resolve_btfids if there's CONFIG_BPF disabled, so we won't fail such builds. Suggested-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200923185735.3048198-1-jolsa@kernel.org
2020-09-23Merge tag 'linux-can-next-for-5.10-20200923' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2020-09-23 this is a pull request of 20 patches for net-next. The complete series target the flexcan driver and is created by Joakim Zhang and me. The first six patches are cleanup (sort include files alphabetically, remove stray empty line, get rid of long lines) and adding more registers and documentation (registers and wakeup interrupt). Then in two patches the transceiver regulator is made optional, and a check for maximum transceiver bitrate is added. Then the ECC support for HW thats supports this is added. The next three patches improve suspend and low power mode handling. Followed by six patches that add CAN-FD support and CAN-FD related features. The last two patches add support for the flexcan IP core on the imx8qm and lx2160ar1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23Merge branch 's390-qeth-next'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: updates 2020-09-23 please apply the following patch series for qeth to netdev's net-next tree. This brings all sorts of cleanups. Highlights are more code sharing in the init/teardown paths, and more fine-grained rollback on errors during initialization (instead of a full-blown teardown). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23s390/qeth: remove forward declarations in L2 codeJulian Wiedmann
Shuffle some code around (primarily all the discipline-related stuff) to get rid of all the unnecessary forward declarations. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23s390/qeth: consolidate teardown codeJulian Wiedmann
Clarify which discipline-specific steps are needed to roll back after error in qeth_l?_set_online(), and which are common to roll back from qeth_hardsetup_card(). Some steps (cancelling the RX modeset, draining the TX queues) are only necessary if the netdev was potentially UP before, so move them to the common qeth_set_offline(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23s390/qeth: consolidate online codeJulian Wiedmann
Move duplicated code from the disciplines into the core path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23s390/qeth: cancel cmds earlier during teardownJulian Wiedmann
Originators of cmd IO typically hold the rtnl or conf_mutex to protect against a concurrent teardown. Since qeth_set_offline() already holds the conf_mutex, the main reason why we still care about cancelling pending cmds is so that they release the rtnl when we need it ourselves. So move this step a little earlier into the teardown sequence. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23s390/qeth: tighten ucast IP lockingJulian Wiedmann
The programming of ucast IPs via qeth_l3_modify_ip() is driven independently from any of our typical locking mechanisms (eg. detaching the netdevice, or holding the conf_mutex). So when we inspect the card state to check whether the required cmd IO should be deferred, there is no protection against concurrent state changes. But by slightly re-ordering the teardown sequence, we can rely on the ip_lock to sufficiently serialize things: 1. when running concurrently to qeth_l3_set_online(), any instance of qeth_l3_modify_ip() that aquires the ip_lock _after_ qeth_l3_recover_ip() will observe the state as CARD_STATE_SOFTSETUP and not defer the IO. 2. when running concurrently to qeth_l3_set_offline(), any instance of qeth_l3_modify_ip() that aquires the ip_lock _after_ qeth_l3_clear_ip_htable() will observe the state as CARD_STATE_DOWN and defer the IO. These guarantees in mind, we can now drop the conf_mutex from the qeth_l3_modify_rxip_vipa() wrapper. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23s390/qeth: replace deprecated simple_stroul()Julian Wiedmann
Convert the remaining occurences in sysfs code to kstrtouint(). While at it move some input parsing out of locked sections, replace an open-coded clamp() and remove some unnecessary run-time checks for ipatoe->mask_bits that are already enforced when creating the object. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23s390/qeth: clean up string ops in qeth_l3_parse_ipatoe()Julian Wiedmann
Indicate the max number of to-be-parsed characters, and avoid copying the address sub-string. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23s390/qeth: relax locking for ipato config dataJulian Wiedmann
card->ipato is currently protected by the conf_mutex. But most users also hold the ip_lock - in particular qeth_l3_add_ip(). So slightly expand the sections under ip_lock in a few places (to effectively cover a few error & no-op cases), and then drop the conf_mutex where it's no longer needed. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23s390/qeth: don't init refcount twice for mcast IPsJulian Wiedmann
mcast IP objects are allocated within qeth_l3_add_mcast_rtnl(), with .ref_counter already set to 1 via qeth_l3_init_ipaddr(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23bpf: Explicitly size compatible_reg_typesLorenz Bauer
Arrays with designated initializers have an implicit length of the highest initialized value plus one. I used this to ensure that newly added entries in enum bpf_reg_type get a NULL entry in compatible_reg_types. This is difficult to understand since it requires knowledge of the peculiarities of designated initializers. Use __BPF_ARG_TYPE_MAX to size the array instead. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200923160156.80814-1-lmb@cloudflare.com
2020-09-23net: microchip: Make `lan743x_pm_suspend` function return right valueZheng Yongjun
drivers/net/ethernet/microchip/lan743x_main.c: In function lan743x_pm_suspend: `ret` is set but not used. In fact, `pci_prepare_to_sleep` function value should be the right value of `lan743x_pm_suspend` function, therefore, fix it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22Merge tag 'mlx5-updates-2020-09-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-09-21 Multi packet TX descriptor support for SKBs. This series introduces some refactoring of the regular TX data path in mlx5 and adds the Enhanced TX MPWQE feature support. MPWQE stands for multi-packet work queue element, and it can serve multiple packets, reducing the PCI bandwidth spent on control traffic. It should improve performance in scenarios where PCI is the bottleneck, and xmit_more is signaled by the kernel. The refactoring done in this series also improves the packet rate on its own. MPWQE is already implemented in the XDP tx path, this series adds the support of MPWQE for regular kernel SKB tx path. MPWQE is supported from ConnectX-5 and onward, for legacy devices we need to keep backward compatibility for regular (Single packet) WQE descriptor. MPWQE is not compatible with certain offloads and features, such as TLS offload, TSO, nonlinear SKBs. If such incompatible features are in use, the driver gracefully falls back to non-MPWQE per SKB. Prior to the final patch "net/mlx5e: Enhanced TX MPWQE for SKBs" that adds the actual support, Maxim did some refactoring to the tx data path to split it into stages and smaller helper functions that can be utilized and reused for both legacy and new MPWQE feature. Performance testing: UDP performance is improved in a single stream pktgen test: Packet rate: 16.86 Mpps (±0.15 Mpps) -> 20.94 Mpps (±0.33 Mpps) Instructions per packet: 434 -> 329 Cycles per packet: 158 -> 123 Instructions per cycle: 2.75 -> 2.67 TCP and XDP_TX single stream tests show no performance difference. MPWQE can reduce PCI bandwidth: PCI Gen2, pktgen at fixed rate of 36864000 pps on 24 CPU cores: Inbound PCI utilization with MPWQE off: 80.3% Inbound PCI utilization with MPWQE on: 59.0% PCI Gen3, pktgen at fixed rate of 56064000 pps on 24 CPU cores: Inbound PCI utilization with MPWQE off: 65.4% Inbound PCI utilization with MPWQE on: 49.3% MPWQE can also reduce CPU load, increasing the packet rate in case of CPU bottleneck: PCI Gen2, pktgen at full rate on 24 CPU cores: Packet rate with MPWQE off: 37.5 Mpps Packet rate with MPWQE on: 49.0 Mpps PCI Gen3, pktgen at full rate on 24 CPU cores: Packet rate with MPWQE off: 57.0 Mpps Packet rate with MPWQE on: 66.8 Mpps Burst size in all pktgen tests is 32. CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz (x86_64) NIC: Mellanox ConnectX-6 Dx GCC 10.2.0 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22Merge branch 'devlink-Use-nla_policy-to-validate-range'David S. Miller
Parav Pandit says: ==================== devlink: Use nla_policy to validate range This two small patches uses nla_policy to validate user specified fields are in valid range or not. Patch summary: Patch-1 checks the range of eswitch mode field Patch-2 checks for the port type field. It eliminates a check in code by using nla policy infrastructure. ==================== Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22devlink: Enhance policy to validate port type input valueParav Pandit
Use range checking facility of nla_policy to validate port type attribute input value is valid or not. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22devlink: Enhance policy to validate eswitch mode valueParav Pandit
Use range checking facility of nla_policy to validate eswitch mode input attribute value is valid or not. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs fixes from Al Viro: "No common topic, just assorted fixes" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fuse: fix the ->direct_IO() treatment of iov_iter fs: fix cast in fsparam_u32hex() macro vboxsf: Fix the check for the old binary mount-arguments struct
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from Jakub Kicinski: - fix failure to add bond interfaces to a bridge, the offload-handling code was too defensive there and recent refactoring unearthed that. Users complained (Ido) - fix unnecessarily reflecting ECN bits within TOS values / QoS marking in TCP ACK and reset packets (Wei) - fix a deadlock with bpf iterator. Hopefully we're in the clear on this front now... (Yonghong) - BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel) - fix AQL on mt76 devices with FW rate control and add a couple of AQL issues in mac80211 code (Felix) - fix authentication issue with mwifiex (Maximilian) - WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro) - fix exception handling for multipath routes via same device (David Ahern) - revert back to a BH spin lock flavor for nsid_lock: there are paths which do require the BH context protection (Taehee) - fix interrupt / queue / NAPI handling in the lantiq driver (Hauke) - fix ife module load deadlock (Cong) - make an adjustment to netlink reply message type for code added in this release (the sole change touching uAPI here) (Michal) - a number of fixes for small NXP and Microchip switches (Vladimir) [ Pull request acked by David: "you can expect more of this in the future as I try to delegate more things to Jakub" ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits) net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU net: Update MAINTAINERS for MediaTek switch driver net/mlx5e: mlx5e_fec_in_caps() returns a boolean net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock net/mlx5e: kTLS, Fix leak on resync error flow net/mlx5e: kTLS, Add missing dma_unmap in RX resync net/mlx5e: kTLS, Fix napi sync and possible use-after-free net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats() net/mlx5e: Fix multicast counter not up-to-date in "ip -s" net/mlx5e: Fix endianness when calculating pedit mask first bit net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported net/mlx5e: CT: Fix freeing ct_label mapping net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready net/mlx5e: Use synchronize_rcu to sync with NAPI net/mlx5e: Use RCU to protect rq->xdp_prog ...
2020-09-22Merge tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "A few fixes - most of them regression fixes from this cycle, but also a few stable heading fixes, and a build fix for the included demo tool since some systems now actually have gettid() available" * tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block: io_uring: fix openat/openat2 unified prep handling io_uring: mark statx/files_update/epoll_ctl as non-SQPOLL tools/io_uring: fix compile breakage io_uring: don't use retry based buffered reads for non-async bdev io_uring: don't re-setup vecs/iter in io_resumit_prep() is already there io_uring: don't run task work on an exiting task io_uring: drop 'ctx' ref on task work cancelation io_uring: grab any needed state during defer prep
2020-09-22Merge tag 'block-5.9-2020-09-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few NVMe fixes, and a dasd write zero fix" * tag 'block-5.9-2020-09-22' of git://git.kernel.dk/linux-block: nvmet: get transport reference for passthru ctrl nvme-core: get/put ctrl and transport module in nvme_dev_open/release() nvme-tcp: fix kconfig dependency warning when !CRYPTO nvme-pci: disable the write zeros command for Intel 600P/P3100 s390/dasd: Fix zero write for FBA devices
2020-09-22Merge tag 'trace-v5.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Check kprobe is enabled before unregistering from ftrace as it isn't registered when disabled. - Remove kprobes enabled via command-line that is on init text when freed. - Add missing RCU synchronization for ftrace trampoline symbols removed from kallsyms. - Free trampoline on error path if ftrace_startup() fails. - Give more space for the longer PID numbers in trace output. - Fix a possible double free in the histogram code. - A couple of fixes that were discovered by sparse. * tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: init: make xbc_namebuf static kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot tracing: fix double free ftrace: Let ftrace_enable_sysctl take a kernel pointer buffer tracing: Make the space reserved for the pid wider ftrace: Fix missing synchronize_rcu() removing trampoline from kallsyms ftrace: Free the trampoline when ftrace_startup() fails kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
2020-09-22can: flexcan: add lx2160ar1 supportJoakim Zhang
The Flexcan on lx2160ar1 supports CAN FD protocol. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20190712075926.7357-9-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: add imx8qm supportJoakim Zhang
The Flexcan on i.MX8QM supports CAN FD protocol. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20190712075926.7357-8-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: add Transceiver Delay Compensation supportJoakim Zhang
The CAN-FD protocol allows the transmission and reception of data at a higher bit rate than the nominal rate used in the arbitration phase when the message's BRS bit is set. The TDC mechanism is effective only during the data phase of FD frames having BRS bit set. It has no effect either on non-FD frames, or on FD frames transmitted at normal bit rate. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20190712075926.7357-7-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: add CAN FD BRS supportJoakim Zhang
This patch adds CAN FD BitRate Switch (BRS) support to driver. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20190712075926.7357-5-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: add ISO CAN FD feature supportJoakim Zhang
ISO CAN FD is introduced to increase the failture detection capability than non-ISO CAN FD. The non-ISO CAN FD is still supported by FlexCAN so that it can be used mainly during an intermediate phase, for evaluation and development purposes. Therefore, it is strongly recommended to configure FlexCAN to the ISO CAN FD protocol by setting the ISOCANFDEN field in the CTRL2 register. NOTE: If you only set "fd on", driver will use ISO FD mode by default. You should set "fd-non-iso on" after setting "fd on" if you want to use NON ISO FD mode. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20190712075926.7357-6-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: add CAN-FD mode supportJoakim Zhang
This patch adds CAN-FD mode support to the driver, it means that payload size can extend up to 64 bytes. Bit timing always set in the CBT register, not in the CTRL1 register any more. This has an extend range of all CAN bit timing variables (PRESDIV, PROPSEG, PSEG1, PSEG2 and RJW), which will improve the bit timing accuracy. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> [mkl: move cbt-based bitrate support into separate function] Link: https://lore.kernel.org/r/20200922144429.2613631-16-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: use struct canfd_frame for CAN classic frameJoakim Zhang
This patch prepares for CAN FD mode, using struct canfd_frame can both for classic format frame and fd format frame. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20190712075926.7357-3-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: flexcan_set_bittiming(): move setup of CAN-2.0 bitiming into ↵Marc Kleine-Budde
separate function This is a patch prepares for the CAN-FD support. In a later patch the setup for canfd bittiming will be added, with this patch the change is easier to read. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-14-mkl@pengutronix.de
2020-09-22can: flexcan: add LPSR mode supportJoakim Zhang
On the i.MX7D in LPSR mode, the controller will be powered off and the configuration state is lost after system resume. Upcoming i.MX8QM/QXP will also completely power off the domain, the controller state is lost and needs restore, too. So we need to set the pinctrl state again and re-start chip to re-configuration after resume. For the wakeup case, it should not set pinctrl to sleep state by pinctrl_pm_select_sleep_state. If the interface is down before suspend, we don't need to re-configure it as it will be configured if the interface is brought up later. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20191204113249.3381-7-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: disable clocks during stop modeJoakim Zhang
Disable clocks while CAN core is in stop mode. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Tested-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20191210085721.9853-2-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: flexcan_chip_stop(): add error handling and propagate error valueJoakim Zhang
This patch implements error handling and propagates the error value of flexcan_chip_stop(). This function will be called from flexcan_suspend() in an upcoming patch in some SoCs which support LPSR mode. Add a new function flexcan_chip_stop_disable_on_error() that tries to disable the chip even in case of errors. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> [mkl: introduce flexcan_chip_stop_disable_on_error() and use it in flexcan_close()] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-11-mkl@pengutronix.de
2020-09-22can: flexcan: add correctable errors correction when HW supports ECCJoakim Zhang
commit cdce844865be ("can: flexcan: add vf610 support for FlexCAN") From above commit by Stefan Agner, the patch just disables non-correctable errors interrupt and freeze mode. It still can correct the correctable errors since ECC enabled by default after reset (MECR[ECCDIS]=0, enable memory error correct) if HW supports ECC. commit 5e269324db5a ("can: flexcan: disable completely the ECC mechanism") From above commit by Joakim Zhang, the patch disables ECC completely (assert MECR[ECCDIS]) according to the explanation of FLEXCAN_QUIRK_DISABLE_MECR that disable memory error detection. This cause correctable errors cannot be corrected even HW supports ECC. The error correction mechanism ensures that in this 13-bit word, errors in one bit can be corrected (correctable errors) and errors in two bits can be detected but not corrected (non-correctable errors). Errors in more than two bits may not be detected. If HW supports ECC, we can use this to correct the correctable errors detected from FlexCAN memory. Then disable non-correctable errors interrupt and freeze mode to avoid that put FlexCAN in freeze mode. This patch adds correctable errors correction when HW supports ECC, and modify explanation for FLEXCAN_QUIRK_DISABLE_MECR. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200416093126.15242-1-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: Add check for transceiver maximum bitrate limitationJoakim Zhang
CAN FD can transmit up to 8Mbps, but some transceivers only can support 5Mbps, so add check in driver. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20191030064245.12923-2-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: flexcan_probe(): make regulator xceiver optionalMarc Kleine-Budde
As the transcevier regulator is optional, this patch switches from devm_regulator_get() to devm_regulator_get_optional(). This gets rid of "using dummy regulator" warning message from the regulator core, if no regulator is available. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-8-mkl@pengutronix.de
2020-09-22can: flexcan: Ack wakeup interrupt separatelyJoakim Zhang
As FLEXCAN_ESR_ALL_INT is for all bus errors and state change IRQ sources, strictly speaking FLEXCAN_ESR_WAK_INT does not belong to these. So add wakeup interrupt ack separately to existing ack of the interrupts. Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20191204113249.3381-3-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-22can: flexcan: quirks: get rid of long linesMarc Kleine-Budde
This patch reformats the quirks to get rid of long lines. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-6-mkl@pengutronix.de
2020-09-22can: flexcan: struct flexcan_regs: document registers not affected by soft resetMarc Kleine-Budde
This patch documents which registers are not affected by a soft reset of the flexcan IP core. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-5-mkl@pengutronix.de
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 21:11:29 +0000