summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-14mac80211: Fix setting txpower to zeroBen Greear
With multiple VIFS ath10k, and probably others, tries to find the minimum txpower for all vifs and uses that when setting txpower in the firmware. If a second vif is added and starts to scan, it's txpower is not initialized yet and it set to zero. ath10k had a patch to ignore zero values, but then it is impossible to actually set txpower to zero. So, instead initialize the txpower to INT_MIN in mac80211, and let drivers know that means the power has not been set and so should be ignored. This should fix regression in: commit 88407beb1b1462f706a1950a355fd086e1c450b6 Author: Ryan Hsu <ryanhsu@qca.qualcomm.com> Date: Tue Dec 13 14:55:19 2016 -0800 ath10k: fix incorrect txpower set by P2P_DEVICE interface Tested on ath10k 9984 with ath10k-ct firmware. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20191217183057.24586-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: support NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_MAC_ADDRSMarkus Theil
This is now a trivial patch, but for seeing the actual changes I (Johannes) split it out from the original. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200115125522.3755-1-markus.theil@tu-ilmenau.de [split into separate cfg80211/mac80211 patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07nl80211: add src and dst addr attributes for control port tx/rxMarkus Theil
When using control port over nl80211 in AP mode with pre-authentication, APs need to forward frames to other APs defined by their MAC address. Before this patch, pre-auth frames reaching user space over nl80211 control port have no longer any information about the dest attached, which can be used for forwarding to a controller or injecting the frame back to a ethernet interface over a AF_PACKET socket. Analog problems exist, when forwarding pre-auth frames from AP -> STA. This patch therefore adds the NL80211_ATTR_DST_MAC and NL80211_ATTR_SRC_MAC attributes to provide more context information when forwarding. The respective arguments are optional on tx and included on rx. Therefore unaware existing software is not affected. Software which wants to detect this feature, can do so by checking against: NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_MAC_ADDRS Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200115125522.3755-1-markus.theil@tu-ilmenau.de [split into separate cfg80211/mac80211 patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: parse also the RSNXE IEShaul Triebitz
Parse also the RSN Extension IE when parsing the rest of the IEs. It will be used in a later patch. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-21-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07cfg80211/mac80211: Allow user space to register for station Rx authenticationIlan Peer
To support Pre Association Security Negotiation (PASN) while already associated to one AP, allow user space to register to Rx authentication frames, so that the user space logic would be able to receive/handle authentication frames from a different AP as part of PASN. Note that it is expected that user space would intelligently register for Rx authentication frames, i.e., only when PASN is used and configure a match filter only for PASN authentication algorithm, as otherwise the MLME functionality of mac80211 would be broken. Additionally, since some versions of the user space daemons wrongly register to all types of authentication frames (which might result in unexpected behavior) allow such registration if the request is for a specific authentication algorithm number. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131114529.894206-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07ieee80211: fix 'the' doubling in commentsZvika Yehudai
Remove redundant 'the' where 'the the' was written. Signed-off-by: Zvika Yehudai <zvikayeh@gmail.com> Link: https://lore.kernel.org/r/20200203080823.24949-1-zvikayeh@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: Remove support for changing AP SMPS modeIlan Peer
The SMPS feature is defined in the specification only to be used by non-AP stations and not by APs, so remove the support for changing the AP's SMPS mode dynamically. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-20-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: Handle SMPS mode changes only in AP modeIlan Peer
According to IEEE802.11 specifications the SM power save field in the HT capability IE and the HE extended capability IE is valid only in (re)association frames and should be ignored otherwise. Remove code paths that handled this also for non AP modes. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-17-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: Accept broadcast probe responses on 6GHz bandAndrei Otcheretianski
An AP that operates on 6GHz may respond with a broadcast probe response. Don't ignore such frames. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-14-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: HE: set RX NSSTova Mussai
In case of HE, the RX NSS is taken from the HE capabilities. If the supported NSS capabilities that are reported by AP for HE mode in the HE Capabilities element are different from the NSS capabilities that are reported by AP for the VHT mode in the VHT Capabilities element, use the lowest supported NSS to not get all the values confused. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-9-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: set station bandwidth from HE capabilityJohannes Berg
Set the station bandwidth in HE capability parsing and from HE capability as the HT/VHT information will not be present on the 6 GHz band. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-5-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: remove supported channels element in 6 GHz if ECSA supportJohannes Berg
We should not include the supported channels element if we have (advertise) support for extended channel switching. To avoid any interop issues because we always added it in the past, obey this restriction only in the (new) 6 GHz band. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131113111.893106-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: update condition for HE disablementDaniel Gabay
Disable HE if the beacon does not contain an HE operation IE. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-16-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: make ieee80211_wep_init() return voidLuca Coelho
This function always returns 0, so there's no point in returning int. Make it void and remove the impossible error-path when calling it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-11-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: allow changing TX-related netdev featuresJohannes Berg
Set ndev->hw_features as well as ndev->features to allow changing the TX-related features with ethtool. We cannot (yet) change RX-related features since that requires telling the driver about it and we have no API for that yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-10-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: check whether HE connection is allowed by the reg domainHaim Dreyfuss
The wireless device might be capable to connect HE as well as the AP. However, the regulatory domain might forbid it. Check whether the regulatory domain allows HE connection when considering if HE IE should be added. Also, add it when setting our peer capability. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-8-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: refactor extended element parsingJohannes Berg
This code was really ugly, refactor it a bit to make it more readable. While at it, use sizeof() and fix the UORA element length check bug. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-4-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: simplify and improve HT/VHT/HE disable codeJohannes Berg
Check early on that a device has support for QoS (at least 4 queues) when it supports HT/VHT/HE, so we don't have to check this while connecting. This lets us clean up the code there: move some of it into channel preparation to clean up a bit more, and then change the logic to only check the "wmm_used" flag. Additionally, disable HE consistently when VHT is disabled. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-3-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07cfg80211: Enhance the AKM advertizement to support per interface.Veerendranath Jakkam
Commit ab4dfa20534e ("cfg80211: Allow drivers to advertise supported AKM suites") introduces the support to advertize supported AKMs to userspace. This needs an enhancement to advertize the AKM support per interface type, specifically for the cfg80211-based drivers that implement SME and use different mechanisms to support the AKM's for each interface type (e.g., the support for SAE, OWE AKM's take different paths for such drivers on STA/AP mode). This commit aims the same and enhances the earlier mechanism of advertizing the AKMs per wiphy. Add new nl80211 attributes and data structure to provide supported AKMs per interface type to userspace. the AKMs advertized in akm_suites are default capabilities if not advertized for a specific interface type in iftype_akm_suites. Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org> Link: https://lore.kernel.org/r/20200126203032.21934-1-vjakkam@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07cfg80211: add no HE indication to the channel flagHaim Dreyfuss
The regulatory domain might forbid HE operation. Certain regulatory domains may restrict it for specific channels whereas others may do it for the whole regulatory domain. Add an option to indicate it in the channel flag. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200121081213.733757-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: fix 11w when using encapsulation offloadingJohn Crispin
The 802.11 encapsulation returned early when setting up the keys in case offloading was enabled. This causes ieee802.11w to not work anymore. Fix this by moving the check for offloading into the switch/case construct and allowing CCMP/GCMP keys. With this patch applied ieee80211w works again when enabling offloading. Fixes: 50ff477a8639 ("mac80211: add 802.11 encapsulation offloading support") Reported-by: Maharaja Kennadyrajan <mkenna@qti.qualcomm.com> Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200203122812.18993-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15mac80211: add ieee80211_is_any_nullfunc()Thomas Pedersen
commit 08a5bdde3812 ("mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED") Fixed a bug where we failed to take into account a nullfunc frame can be either non-QoS or QoS. It turns out there is at least one more bug in ieee80211_sta_tx_notify(), introduced in commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing"), where we forgot to check for the QoS variant and so assumed the QoS nullfunc frame never went out Fix this by adding a helper ieee80211_is_any_nullfunc() which consolidates the check for non-QoS and QoS nullfunc frames. Replace existing compound conditionals and add a couple more missing checks for QoS variant. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200114055940.18502-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15mac80211_hwsim: add power save supportThomas Pedersen
Advertise the correct flags to mac80211 to indicate PS trigger frames and frame buffering should be handled by mac80211. This means mac80211_hwsim will now also have to release buffered multicast frames after a (DTIM) beacon. Leave STA power save disabled by default since it causes several p2p, scanning, and rrm hostap tests to fail. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200114055940.18502-2-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15mac80211: fix tx status for no ack casesMarkus Theil
Before this patch, frames which where successfully transmitted without requiring acks where accounted as lost frames. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20191218142736.15843-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15mac80211: add handling for BSS colorJohn Crispin
It is now possible to propagate BSS color settings into the subsystem. Lets make mac80211 also handle them so that we can send them further down the stack into the drivers. We drop the old bss_color field and change iwlwifi to use the new he_bss_color struct. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20191217141921.8114-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15nl80211: add handling for BSS colorJohn Crispin
This patch adds the attributes, policy and parsing code to allow userland to send the info about the BSS coloring settings to the kernel. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20191217141921.8114-1-john@phrozen.org [johannes: remove the strict policy parsing, that was a misunderstanding] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15mac80211_hwsim: remove maximum TX powerJohannes Berg
This is too low, at least ETSI regulatory domain would allow 36 dBm on 5 GHz in (some? most?) cases. But there's no reason hwsim should have a limit at all, so remove it. See also https://lore.kernel.org/r/20191108152013.13418-1-ramonreisfontes@gmail.com Change-Id: I6edf81d2e82bc8ce7baa40bfc0f210b7b56ef275 Reported-by: Ramon Fontes <ramonreisfontes@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-02mac80211: debugfs: improve airtime_flags handler readabilityLorenzo Bianconi
Improve airtime_flags debugfs handler readability reporting configured airtime flags in both numeric and human readable manner Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/9df7e40b45e95bb0b320317831455beaed1ee3ee.1574872357.git.lorenzo@kernel.org [remove AQL since it's no longer there] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-02Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg
Merging to get the mac80211 updates that have since propagated into net-next. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-12-31Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2019-12-31 This series contains updates to e1000e, igb and igc only. Robert Beckett provide an igb change to assist in keeping packets from being dropped due to receive descriptor ring being full when receive flow control is enabled. Create a separate function to setup SRRCTL to ease in reuse and ensure that setting of the drop enable bit only if receive flow control is not enabled. Sasha adds support for scatter gather support in igc. Improve the direct memory address mapping flow by optimizing/simplifying and more clear. Update igc to use pci_release_mem_regions() instead of pci_release_selected_regions(). Clean up function header comments to align with the actual code. Adds support for 64 bit DMA access, to help handle socket buffer fragments in high memory. Adds legacy power management support in igc by implementing suspend, resume, runtime_suspend/resume, and runtime_idle callbacks. Clean up references to Serdes interface in igc since that interface is not supported for i225 devices. Alex replaces the pr_info calls with netdev_info in all cases related to netdev link state, as suggested by Joe Perches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31igc: Remove serdes comments from a description of methodsSasha Neftin
Serdes interface is not applicable for i225 devices. Remove this from comments and make comments more clearly. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31e1000e: Use netdev_info instead of pr_info for link messagesAlexander Duyck
Replace the pr_info calls with netdev_info in all cases related to the netdevice link state. As a result of this patch the link messages will change as shown below. Before: e1000e: ens3 NIC Link is Down e1000e: ens3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx After: e1000e 0000:00:03.0 ens3: NIC Link is Down e1000e 0000:00:03.0 ens3: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Add legacy power management supportSasha Neftin
Add suspend, resume, runtime_suspend, runtime_resume and runtime_idle callbacks implementation. Reported-by: kbuild test robot <lpk@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31igc: Add 64 bit DMA access supportSasha Neftin
On relevant platforms ndo_start_xmit can handle socket buffer fragments in high memory Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Fix parameter descriptions for a several functionsSasha Neftin
igc_watchdog, igc_set_interrupt_capability, igc_init_interrupt_scheme, __igc_open and __igc_close parameter descriptions has not reflected functions meaning. Add meaningful description. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Fix the parameter description for igc_alloc_rx_buffersSasha Neftin
The function description for igc_alloc_rx_buffers has not reflected the function meaning. Add meaningful description. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Remove excess parameter description from igc_is_non_eopSasha Neftin
The function description for igc_is_non_eop includes an extra @skb parameter description. This parameter doesn't exist on the function, so remove it. Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Prefer to use the pci_release_mem_regions methodSasha Neftin
Use the pci_release_mem_regions method instead of the pci_release_selected_regions method Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Improve the DMA mapping flowSasha Neftin
Improve the probe flow and set both the DMA mask and the coherent to the same thing. Make the flow optimized and cleared. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Add scatter gather supportSasha Neftin
Scatter gather is used to do DMA data transfers of data that is written to noncontiguous areas of memory. This patch enables scatter gather support. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igb: dont drop packets if rx flow control is enabledRobert Beckett
If Rx flow control has been enabled (via autoneg or forced), packets should not be dropped due to Rx descriptor ring exhaustion. Instead pause frames should be used to apply back pressure. This only applies if VFs are not in use. Move SRRCTL setup to its own function for easy reuse and only set drop enable bit if Rx flow control is not enabled. Since v1: always enable dropping of packets if VFs in use. Signed-off-by: Robert Beckett <bob.beckett@collabora.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix big endian overflow in nf_flow_table, from Arnd Bergmann. 2) Fix port selection on big endian in nft_tproxy, from Phil Sutter. 3) Fix precision tracking for unbound scalars in bpf verifier, from Daniel Borkmann. 4) Fix integer overflow in socket rcvbuf check in UDP, from Antonio Messina. 5) Do not perform a neigh confirmation during a pmtu update over a tunnel, from Hangbin Liu. 6) Fix DMA mapping leak in dpaa_eth driver, from Madalin Bucur. 7) Various PTP fixes for sja1105 dsa driver, from Vladimir Oltean. 8) Add missing to dummy definition of of_mdiobus_child_is_phy(), from Geert Uytterhoeven * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename() net/sched: add delete_empty() to filters and use it in cls_flower tcp: Fix highest_sack and highest_sack_seq ptp: fix the race between the release of ptp_clock and cdev net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S Documentation: net: dsa: sja1105: Remove text about taprio base-time limitation net: dsa: sja1105: Remove restriction of zero base-time for taprio offload net: dsa: sja1105: Really make the PTP command read-write net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slot cxgb4/cxgb4vf: fix flow control display for auto negotiation mlxsw: spectrum: Use dedicated policer for VRRP packets mlxsw: spectrum_router: Skip loopback RIFs during MAC validation net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs net/sched: act_mirred: Pull mac prior redir to non mac_header_xmit device net_sched: sch_fq: properly set sk->sk_pacing_status bnx2x: Fix accounting of vlan resources among the PFs bnx2x: Use appropriate define for vlan credit of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummy net: phy: aquantia: add suspend / resume ops for AQR105 dpaa_eth: fix DMA mapping leak ...
2019-12-31Merge tag 'tomoyo-fixes-for-5.5' of ↵Linus Torvalds
git://git.osdn.net/gitroot/tomoyo/tomoyo-test1 Pull tomoyo fixes from Tetsuo Handa: "Two bug fixes: - Suppress RCU warning at list_for_each_entry_rcu() - Don't use fancy names on sockets" * tag 'tomoyo-fixes-for-5.5' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1: tomoyo: Suppress RCU warning at list_for_each_entry_rcu(). tomoyo: Don't use nifty names on sockets.
2019-12-30hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename()Taehee Yoo
hsr slave interfaces don't have debugfs directory. So, hsr_debugfs_rename() shouldn't be called when hsr slave interface name is changed. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 ip link set dummy0 name ap Splat looks like: [21071.899367][T22666] ap: renamed from dummy0 [21071.914005][T22666] ================================================================== [21071.919008][T22666] BUG: KASAN: slab-out-of-bounds in hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.923640][T22666] Read of size 8 at addr ffff88805febcd98 by task ip/22666 [21071.926941][T22666] [21071.927750][T22666] CPU: 0 PID: 22666 Comm: ip Not tainted 5.5.0-rc2+ #240 [21071.929919][T22666] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [21071.935094][T22666] Call Trace: [21071.935867][T22666] dump_stack+0x96/0xdb [21071.936687][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.937774][T22666] print_address_description.constprop.5+0x1be/0x360 [21071.939019][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.940081][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.940949][T22666] __kasan_report+0x12a/0x16f [21071.941758][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.942674][T22666] kasan_report+0xe/0x20 [21071.943325][T22666] hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.944187][T22666] hsr_netdev_notify+0x1fe/0x9b0 [hsr] [21071.945052][T22666] ? __module_text_address+0x13/0x140 [21071.945897][T22666] notifier_call_chain+0x90/0x160 [21071.946743][T22666] dev_change_name+0x419/0x840 [21071.947496][T22666] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [21071.948600][T22666] ? netdev_adjacent_rename_links+0x280/0x280 [21071.949577][T22666] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [21071.950672][T22666] ? lock_downgrade+0x6e0/0x6e0 [21071.951345][T22666] ? do_setlink+0x811/0x2ef0 [21071.951991][T22666] do_setlink+0x811/0x2ef0 [21071.952613][T22666] ? is_bpf_text_address+0x81/0xe0 [ ... ] Reported-by: syzbot+9328206518f08318a5fd@syzkaller.appspotmail.com Fixes: 4c2d5e33dcd3 ("hsr: rename debugfs file when interface name is changed") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net/sched: add delete_empty() to filters and use it in cls_flowerDavide Caratti
Revert "net/sched: cls_u32: fix refcount leak in the error path of u32_change()", and fix the u32 refcount leak in a more generic way that preserves the semantic of rule dumping. On tc filters that don't support lockless insertion/removal, there is no need to guard against concurrent insertion when a removal is in progress. Therefore, for most of them we can avoid a full walk() when deleting, and just decrease the refcount, like it was done on older Linux kernels. This fixes situations where walk() was wrongly detecting a non-empty filter, like it happened with cls_u32 in the error path of change(), thus leading to failures in the following tdc selftests: 6aa7: (filter, u32) Add/Replace u32 with source match and invalid indev 6658: (filter, u32) Add/Replace u32 with custom hash table and invalid handle 74c2: (filter, u32) Add/Replace u32 filter with invalid hash table id On cls_flower, and on (future) lockless filters, this check is necessary: move all the check_empty() logic in a callback so that each filter can have its own implementation. For cls_flower, it's sufficient to check if no IDRs have been allocated. This reverts commit 275c44aa194b7159d1191817b20e076f55f0e620. Changes since v1: - document the need for delete_empty() when TCF_PROTO_OPS_DOIT_UNLOCKED is used, thanks to Vlad Buslov - implement delete_empty() without doing fl_walk(), thanks to Vlad Buslov - squash revert and new fix in a single patch, to be nice with bisect tests that run tdc on u32 filter, thanks to Dave Miller Fixes: 275c44aa194b ("net/sched: cls_u32: fix refcount leak in the error path of u32_change()") Fixes: 6676d5e416ee ("net: sched: set dedicated tcf_walker flag when tp is empty") Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Suggested-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Tested-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net/ncsi: Fix gma flag setting after responseVijay Khemka
gma_flag was set at the time of GMA command request but it should only be set after getting successful response. Movinng this flag setting in GMA response handler. This flag is used mainly for not repeating GMA command once received MAC address. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30sctp: add enabled check for path tracepoint loop.Kevin Kou
sctp_outq_sack is the main function handles SACK, it is called very frequently. As the commit "move trace_sctp_probe_path into sctp_outq_sack" added below code to this function, sctp tracepoint is disabled most of time, but the loop of transport list will be always called even though the tracepoint is disabled, this is unnecessary. + /* SCTP path tracepoint for congestion control debugging. */ + list_for_each_entry(transport, transport_list, transports) { + trace_sctp_probe_path(transport, asoc); + } This patch is to add tracepoint enabled check at outside of the loop of transport list, and avoid traversing the loop when trace is disabled, it is a small optimization. Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30Merge branch 'Improvements-to-SJA1105-DSA-RX-timestamping'David S. Miller
Vladimir Oltean says: ==================== Improvements to SJA1105 DSA RX timestamping This series makes the sja1105 DSA driver use a dedicated kernel thread for RX timestamping, a process which is time-sensitive and otherwise a bit fragile. This allows users to customize their system (probabil an embedded PTP switch) fully and allocate the CPU bandwidth for the driver to expedite the RX timestamps as quickly as possible. While doing this conversion, add a function to the PTP core for cancelling this kernel thread (function which I found rather strange to be missing). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Empty the RX timestamping queue on PTP settings changeVladimir Oltean
When disabling PTP timestamping, don't reset the switch with the new static config until all existing PTP frames have been timestamped on the RX path or dropped. There's nothing we can do with these afterwards. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 04:57:31 +0000